等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

延期开学期间化学类专业线上教学情况调研分析与建议

During the suspending of education for prevention and control of COVID-19 epidemic, chemistry majors in colleges and universities actively responded to the requirements of the Ministry of Education that "class is suspended without stopping teaching, class suspension without learning suspension", and earnestly organized online teaching. The National Instructional Committee of Chemistry Higher Education designed three questionnaires for chemistry majors, teachers and students to make survey on the online teaching. Through analysis of the survey, some important problems and suggestions are put forward. It is of significance to promote the future online education and teaching reform of relevant courses of chemistry majors.     

“化学在抗击新冠肺炎疫情中扮演的重要角色”专题教学

Considering COVID-19 epidemic prevention and control, education materials were excavated and refined, such as chemical disinfectants, typical drugs used in clinical treatment or trial and materials for preparation of medical protective equipment. We have carried out thematic teaching on "The important role of chemistry in the fight against COVID-19 epidemic", and integrated ideological and political education into the thematic teaching. Through thematic teaching, we can make students feel the charm of chemistry subject, stimulate students' interest in learning chemistry, fully mobilize students' learning enthusiasm and initiative, strengthen students' confidence and courage to overcome difficulties, cultivate the students' professional disciplines literacy and scientific literacy, activate students' love for the motherland, the people and the Communist Party of China.     

基于MOOC的“无机化学Ⅱ”课程在线教学的探索与实践

During the battle against COVID-19 epidemic, the inorganic chemistry teaching team of Jilin University carried out online teaching of student-centered "inorganic chemistry Ⅱ" course based on "inorganic element chemistry" MOOC with Chaoxing learning platform and QQ group as the auxiliaries. Through the big data support and interactive communication section of Chaoxing learning platform, the learning situation of students in the three learning links of "pre-class, in-class, after-class" was timely tracked and analyzed. Practice showed that online teaching could accomplish teaching and learning effectively.     

充分利用优质网络资源和教学立方平台，助力配位化学线上教学

In early 2020, because of the outbreak of COVID-19, students are unable to return school on time and normal teaching activities are postponed. In order to implement the requirement of "No suspension of classes" proposed by the Ministry of Education, and to ensure the teaching quality at the same time, the coordination chemistry teaching team from Nanjing University successfully carried out the exploration and practice of online teaching of coordination chemistry by using the MOOC of coordination chemistry on "Wisdom Tree" platform as the curriculum resource, QQ Live or Tencent Meeting as the online teaching tool and Pedagogy Square as the intelligent teaching platform. This teaching form reorganizes and optimizes the available resources online, and implements the student learning process evaluation and the teacher teaching evaluation. The feedback from students and teachers indicates the success of this teaching form.     

基于教学立方和视频直播的在线教学探索

由新型冠状病毒引起的传染性肺炎的疫情导致国内大中小学普遍推迟了2020年春季学期的开学时间。为了落实教育部提出的"停课不停教、停课不停学"的要求,我们提出基于教学立方配合视频直播平台的在线教学方案,并用于有机化学课程的在线教学实践。利用教学立方,学生进行课前预习和课后复习;利用视频直播间作为虚拟教室进行课上教学,并使用教学立方进行互动。该方案不仅可以保证疫情防控期间教学进度和教学质量,基本做到在线学习与线下课堂教学质量实质等效。而且,疫情过后,仍然可以作为在线教学或者线上线下混合教学方案继续使用,为打造"金课"奠定基础。     

物理化学在线开放课程的建设与应用

The construction and characteristics of physical chemistry online open course of Nanjing University have been introduced in this paper, and the application of physical chemistry online open course has been discussed according to the practical experience of online teaching of physical chemistry course during the COVID-19 epidemic period, which could provide a reference for online teaching of physical chemistry.     

材料化学课程线上教学初探

2020新年伊始,新冠肺炎突然来袭,为了防止聚集性感染,教育部提出了"停课不停教、停课不停学"的要求。地方普通高校学生的自律性、自觉性及能动性差别十分明显,这样的学情对如何有效开展化学专业的线上教学工作提出了更大的挑战。本文以材料化学课程线上教学为例,介绍地方普通高校化学专业线上教学工作的开展情况。针对教学过程中遇到的各种问题和采用的应对方案,探讨线上教学过程中的注意事项。希望本文能为地方普通高校化学专业线上教学工作提供有益的参考。     

以学为中心的高分子化学线上教学实践

In response to the COVID-19 epidemic prevention, the "polymer chemistry" course teaching team actively explored the "learning-centered" online teaching model. The students were guided to active learning by using the rich contents of Chaoxin online teaching platform and multiple online teaching activities. The basic knowledge points, difficulties and emphases of the teaching were highlighted and the real-time communication and Q&A were achieved in combination with the Tencent course live broadcast and QQ learning group. Following the concept of "students as the main body and teachers as the leading", the online teaching of "polymer chemistry" has effectively aroused the students' interest in learning, cultivated the initiative of autonomous learning, organically integrated the ideological and political education, and achieved a good learning outcome.     

促进物理化学在线教学质量的实践

During the special period in the epidemic COVID-19, the five-step online teaching mode focusing on learning outcome of students has been constructed based on the national high-quality MOOC in physical chemistry and various network technologies (i.e. MOOC class, Tencent QQ group and meeting platform), which is "guide to learn boost, self-study by MOOC, online testing, timely feedback, advanced discussion". It has been demonstrated that diversified online interactive teaching strategies can effectively promote the online teaching quality, through teachers giving full play to the leading roles, encouraging and guiding students to participate in the whole online teaching process.     

虚拟仿真实验项目助力实验课在线教学

Due to the outbreak of the COVID-19 epidemic, the new semester has been postponed. But in order to continue teaching and student training work, teachers from colleges are efficiently utilizing internet education resources, and actively carry out online teaching. This paper uses one of the virtual simulation experiment projects at Shandong University, as an example. It introduces how to conduct online laboratory training and teaching in inorganic and analytical chemistry laboratory by utilizing the combination of virtual simulation experiment projects and online resources, and help student learn the theory and operation of iodometry titration.