硅改性ZSM—5沸石分子筛的酸性,孔径和择形催化性能的研究

在不同条件下用各种硅改性剂对ＺＳＭ－５沸石分子筛进行改性，并将其用于催化乙苯歧化生成对二乙苯的反应。实验结果表明，在合适条件下用ＳｉＣｌ４对ＺＳＭ－５改性后，可以获得高性能形选催化剂。硅改性可以有效地消除催化剂外表面酸中心，并能对分子筛孔道进行微调。根据反应结果和反应物在催化剂中的扩散系数判断，当改性后催化剂的孔道半径与ＮａＺＳＭ－５沸石孔道半径相近时，其催化选择性最佳。     

硅改性ZSM－5沸石分子筛的酸性、孔径和择形催化性能的研究

在不同条件下用各种硅改性剂对ＺＳＭ－５沸石分子筛进行改性，并将其用于催化乙苯歧化生成对二乙苯的反应。实验结果表明，在合适条件下用ＳｉＣｌ＿４对ＺＳＭ－５改性后，可以获得高性能形选催化剂。硅改性可以有效地消除催化剂外表面酸中心，并能对分子筛孔道进行微调。根据反应结果和反应物在催化剂中的扩散系数判断，当改性后催化剂的孔道半径与ＮａＺＳＭ－Ｓ沸石孔道半径相近时，其催化选择性最佳。     

CuZSM-5分子筛上苯酚羟化制苯二酚

在Ｎａ２Ｏ－ＳｉＯ２－ＣｕＯ－Ｈ２Ｏ体系中以１５％ＴＰＡＢｒ－８５％ＨＭＤＡ为模板剂合成了ＣｕＺＳＭ－５分子筛，并用ＸＲＤ，ＩＲ及ＳＥＭ等方法进行了表征，考察了ＣｕＺＳＭ－５分子筛催化苯酚与过氧化氢的羟化活性，研究了催化剂用量、反应温度、反应时间及ｎ（ＰｈＯＨ）／ｎ（Ｈ２Ｏ２）等对羟化活性的影响．     

改性ZSM－5分子筛在甲苯一段硝化中的应用

对ＮａＺＳＭ－５分子筛进行改性，在其表面引入铁、镁离子，用作硝硫混酸对甲苯一段硝化反应的催化剂，明显提高产物中对硝基甲苯的生成比例，研究了影响反应结果的因素。     

改性ZSM—5分子筛在甲苯一段硝化中的应用

对ＮａＺＳＭ－５分子筛进行改性，在其表面引入铁，镁离子，用作硝硫混酸对甲苯一段硝化反应的催化剂，明显提高产物中对硝基甲苯的生成比例，研究了影响反应结果的因素。     

CuZSM—5分子筛上苯酚羟化制苯二酚

在Ｎａ２Ｏ－ＳｉＯ２－ＣｕＯ－Ｈ２Ｏ体系中以１５％ＴＰＡＢｒ－８５％ＨＭＤＡ为模板剂合成了ＣｕＺＳＭ－５分子筛，并用ＸＲＤ，ＩＲ及ＳＥＭ等方法进行了表征，考察了ＣｕＺＳＭ－５分子筛催化苯酚与过氧化氢的羟化活性，研究了催化剂用量，反应温度，反应时间及ｎ（ＰｂＯＨ）／ｎ（Ｈ２Ｏ２）等对羟化活性的影响。     

金属键有机化合物的研究──非对称型η~5－取代环戊二烯基三羰基钼（钨）金属单键化合物的合成及表征

通过η５－Ｒ~１Ｃ＿５Ｈ＿４（ＣＯ）＿３ＭＮａ与η~５－Ｒ~２Ｃ＿５Ｈ＿４（ＣＯ）＿３ＭＮａ（Ｍ＝Ｍｏ，Ｗ）以及η~５－Ｒ~１Ｃ＿５Ｈ＿４（ＣＯ）＿３ＭｏＮａ与η~５－Ｒ~２Ｃ＿５Ｈ＿４（ＣＯ）＿３ＷＮａ在Ｆｅ＿２（ＳＯ＿４）＿３醋酸水溶液作用下的交叉氧化偶联反应，合成了７个新的非对称型金属单键化合物η~５－Ｒ~１Ｃ＿５Ｈ＿４（ＣＯ）－３Ｍｏ─Ｍｏ（ＣＯ）＿３Ｃ＿５Ｈ＿４Ｒ~２－η~５（Ｒ~１，Ｒ~２：Ｃ（Ｏ）Ｍｅ，ＣＯ２Ｅｔ），η５－Ｒ１Ｃ５Ｎ４（ＣＯ）３Ｗ─Ｗ（ＣＯ）３Ｃ５Ｈ４Ｒ２－η５（Ｒ１，Ｒ２：Ｃ（Ｏ）Ｍｅ，ＣＯ２Ｅｔ；Ｈ，ＣＯ２Ｅｔ）和η５－Ｒ１Ｃ５Ｈ４（ＣＯ）３Ｍｏ─Ｗ（ＣＯ）３Ｃ５Ｈ４Ｒ２－η５（Ｒ１，Ｒ２：Ｃ（Ｏ）Ｍｅ，Ｈ；Ｅｔ，Ｃ（Ｏ）Ｍｅ；Ｃ（Ｏ）Ｍｅ，ｎ－Ｂｕ；ＣＯ２Ｍｅ，ｎ－Ｂｕ）．用Ｃ／Ｎ分析、ＩＲ、１ＨＮＭＲ和ＭＳ表征了它们的结构，并对该氧化偶联反应的特点进行了讨论．     

阳离子改性HZSM-5沸石上低碳醇反应历程的TPSR-MS研究

用ＴＰＳＲ－ＭＳ技术研究了Ｃｕ，Ｚｎ和Ｇａ改性Ｈ－ＺＳＭ－５沸石的活性中心性质及Ｃ１～Ｃ４醇的反应历程。结果表明，Ｚｎ－和Ｇａ－ＺＳＭ－５有两种芳构化活性中心，即Ｂ酸和Ｚｎ，Ｇａ活性物种；甲醇在Ｃｕ－ＺＳＭ－５上只生成二甲醚、ＣＯ和ＣＯ２，而在Ｚｎ－ＺＳＭ－５上芳构化反应历程为：（１）醇经由醚脱水生成烯烃，Ｃ２～Ｃ４醇学可单分子脱水生成烯烃；（２）烯烃中间物齐聚，齐聚物通过氢转移和脱氢途径环化、芳     

等瓣置换反应的研究——手性簇合物[η^—MeO2CC5H4）（CO）2Mo…

用Ｘ射线衍微法测定了由η＾５－ＭｅＯ２ＣＣ５Ｈ４（ＣＯ）３ＭｏＮａ和〔（η＾５－ＭｅＯ２ＣＣ５Ｈ４）（ＣＯ）２Ｗ〕Ｆｅ－（ＣＯ）３Ｃｏ（ＣＯ）３（μ３－Ｓ）的等瓣置换反应所生成的手性簇合物－〔（η＾５－ＭｅＯ２ＣＣ５Ｈ４）（ＣＯ）２Ｍｏ〕－〔（η＾５－ＭｅＯ２ＣＣ５Ｈ４）（ＣＯ）２Ｗ〕Ｆｅ（ＣＯ）３（μ３－Ｓ）的分子结构及晶体结构。晶体属Ｐ１空间群，晶胞参数ａ＝０．８７１６２（５）ｎｍ，ｂ＝０．８     

（四甲基二硅撑）双（3—三甲硅基环戊二烯基）—四羰基二铁…

标题化合物（Ｍｅ２ＳｉＳｉＭｅ２）〔η＾５－（３－Ｍｅ３ＳｉＣ５Ｈ３）Ｆｅ（ＣＯ）２〕２／（μ－ＣＯ）２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ２Ｃｌ、ＣｌＣＨ２ＣＯＯＣ２Ｈ５和Ｐｈ３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ２ＳｉＳｉＭｅ２）〔η＾５－（３－Ｍｅ３ＳｉＣ５Ｈ３）Ｆｅ（ＣＯ）２Ｒ〕２（Ｒ：Ｍ     

First-principles density functional calculation of electrochemical stability of fast Li ion conducting garnet-type oxides

The research and development of rechargeable all-ceramic lithium batteries are vital to realize their considerable advantages over existing commercial lithium ion batteries in terms of size, energy density, and safety. A key part of such effort is the development of solid-state electrolyte materials with high Li(+) conductivity and good electrochemical stability; lithium-containing oxides with a garnet-type structure are known to satisfy the requirements to achieve both features. Using first-principles density functional theory (DFT), we investigated the electrochemical stability of garnet-type Li(x)La(3)M(2)O(12) (M = Ti, Zr, Nb, Ta, Sb, Bi; x = 5 or 7) materials against Li metal. We found that the electrochemical stability of such materials depends on their composition and structure. The electrochemical stability against Li metal was improved when a cation M was chosen with a low effective nuclear charge, that is, with a high screening constant for an unoccupied orbital. In fact, both our computational and experimental results show that Li(7)La(3)Zr(2)O(12) and Li(5)La(3)Ta(2)O(12) are inert to Li metal. In addition, the linkage of MO(6) octahedra in the crystal structure affects the electrochemical stability. For example, perovskite-type La(1/3)TaO(3) was found, both experimentally and computationally, to react with Li metal owing to the corner-sharing MO(6) octahedral network of La(1/3)TaO(3), even though it has the same constituent elements as garnet-type Li(5)La(3)Ta(2)O(12) (which is inert to Li metal and features isolated TaO(6) octahedra).     

First total H+/Li+ ion exchange in garnet-type Li5La3Nb2O12 using organic acids and studies on the effect of Li stuffing

Garnet-type Li(5+x)Ba(x)La(3-x)Nb(2)O(12) (x = 0, 0.5, 1) was prepared using a ceramic method, and H(+)/Li(+) ion exchange was performed at room temperature using organic acids, such as CH(3)COOH and C(6)H(5)COOH, as proton sources. Thermogravimetric analysis showed that H(+)/Li(+) ion exchange was nearly (100%) completed using the x = 0 member with CH(3)COOH, while it proceeded to about 40% for x = 0.5 and 13% for x = 1. In C(6)H(5)COOH, proton exchange proceeded to about 82% for x = 0, ～40% for x = 0.5, and ～25% for x = 1. Similar proton-exchange trends were reported in H(2)O, where ion exchange occurs more readily for garnets with lower Li content in Li(5+x)Ba(x)La(3-x)Nb(2)O(12), that is, when excess Li ions preferentially reside in the tetrahedral sites of the garnet structure.     

锂在甲烷氧化偶联催化剂中的助催化作用

自Lunsford等首次报道在Li/MgO催化剂上的甲烷氧化偶联(OCM)以来,许多研究者相继报道了添加碱金属对该反应的影响,其中以Li的添加最受关注。Li在OCM反应中对提高C_2烃选择性的作用最为明显,因而弄清Li在这一反应中的作用十分必要。本文讨论了Li在几个有代表性的碱土(CaO)及稀土(La_2O_3)中的存在形式与生成C_2产物的关系。     

Unique formation of a pentanuclear lanthanum(III) thiolate oxide cluster via control of hydrolysis

The reaction of [(TMS)2N]3La(mu-Cl)Li(THF)3 (1) and HSPh produced a bimetallic complex [{(TMS)2N}2La(THF)]2(mu-SPh)(mu-Cl)] (2). Compound [{(TMS)2N}2La5O(SPh)10LiCl2(THF)6] (3) was prepared by control of the hydrolysis of 2 and LiCl or 1 and HSPh with the proper amount of water. 1 was treated first with 1/6 equiv of H2O and then with equimolar HSPh; a polymeric complex [{(TMS)2N}2(mu-SPh)La(mu-SPh)Li(THF)2](infinity) (4) was isolated. 3 contains a central [(mu-SPh)4(mu3-SPh)2{La(THF)}4(mu3-O)]4+ tetrahedral fragment in which two La atoms are linked by a pair of mu-SPh- and mu3-Cl- ligands to a [{(TMS)2N}2La]+ fragment, while the other two are bridged by two mu-SPh- ligands to a [Li(THF)2]+ fragment, forming a bee-shaped structure.     

SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.     

The structure of lithium garnets: cation disorder and clustering in a new family of fast Li+ conductors

The structure of the fast lithium-ion conducting garnets Li5La3M2O12 (M = Ta, Nb) reveals Li+ on both tetrahedral and octahedral sites and suggests that the latter are responsible for the observed Li+ mobility via a clustering mechanism.     

Lithium dimer formation in the Li-conducting garnets Li(5+x)Ba(x)La(3-x)Ta2O12 (0 < x < or =1.6)

The garnet system Li(5+x)Ba(x)La(3-x)Ta2O12 shows an unprecedented Li+ content (x < or = 1.6) and short Li-Li distances of ca 2.44 A between majority occupied sites suggesting that the high Li+ mobility requires a complex cooperative mechanism.     

碱—碱土—稀土催化剂发射光谱的研究

用Eu~(3+)的发射光谱探讨了O~-物种的形成。对M/MgO、M/CaO体系(M为碱金属)的研究发现,Li~+、Na~+可进入MgO晶格;Li~+、Na~+、K~+可进入CaO晶格。由于Li~+不能进入La_2O_3晶格,故不能形成O~-物种,表明不同的催化剂体系在甲烷氧化偶联反应中会形成不同的活性中心。     

Changes in electronic structure upon lithium insertion into the A-site deficient perovskite type oxides (Li,La)TiO3

Investigation on variation of the electronic structure accompanying the electrochemical lithium insertion into the perovskite type oxide, (Li,La)TiO3, has been carried out by X-ray absorption spectroscopy (XAS). During the electrochemical lithium insertion, titanium ion reduced its oxidation state from Ti4+ to Ti3+, while La3+ does not contribute to the reduction reaction resulting from Ti K-edge and La L3-edge XAS, respectively. Furthermore, O K-edge XAS showed marked spectral changes with electrochemical lithium insertion, indicating the electronic structure around oxide ion affected by lithium insertion reaction. From the XAS measurement, we have concluded the variation observed in O K-edge XAS was related to the strong interaction with inserted Li ion. To confirm this, first-principles band calculations were performed for the perovskite structure before and after electrochemical lithium insertion. The calculated results showed that the electron originated from inserted Li transferred to neighboring oxide ion locally as well as to Ti ion. This may be due to local neutralization effect of Li to reduce the electrostatic interaction in the crystal.     

Experimental visualization of lithium conduction pathways in garnet-type Li(7)La(3)Zr(2)O(12)

The evolution of the Li-ion displacements in the 3D interstitial pathways of the cubic garnet-type Li(7)La(3)Zr(2)O(12), cubic Li(7)La(3)Zr(2)O(12), was investigated with high-temperature neutron diffraction (HTND) from RT to 600 °C; the maximum-entropy method (MEM) was applied to estimate the Li nuclear-density distribution. Temperature-driven Li displacements were observed; the displacements indicate that the conduction pathways in the garnet framework are restricted to diffusion through the tetrahedral sites of the interstitial space.