Influence of terpyridine as pi-acceptor ligand on the kinetics and mechanism of the reaction of NO with ruthenium(III) complexes

The kinetics of the unusually fast reaction of cis- and trans-[Ru(terpy)(NH3)2Cl]2+ (with respect to NH3; terpy=2,2':6',2"-terpyridine) with NO was studied in acidic aqueous solution. The multistep reaction pathway observed for both isomers includes a rapid and reversible formation of an intermediate Ru(III)-NO complex in the first reaction step, for which the rate and activation parameters are in good agreement with an associative substitution behavior of the Ru(III) center (cis isomer, k1=618 +/- 2 M(-1) s(-1), DeltaH(++) = 38 +/- 3 kJ mol(-1), DeltaS(++) = -63 +/- 8 J K(-1) mol(-1), DeltaV(++) = -17.5 +/- 0.8 cm3 mol(-1); k -1 = 0.097 +/- 0.001 s(-1), DeltaH(++) = 27 +/- 8 kJ mol(-1), DeltaS(++) = -173 +/- 28 J K(-1) mol(-1), DeltaV(++) = -17.6 +/- 0.5 cm3 mol(-1); trans isomer, k1 = 1637 +/- 11 M(-1) s(-1), DeltaH(++) = 34 +/- 3 kJ mol(-1), DeltaS(++) = -69 +/-11 J K(-1) mol(-1), DeltaV(++) = -20 +/- 2 cm3 mol(-1); k(-1)=0.47 +/- 0.08 s(-1), DeltaH(++)=39 +/- 5 kJ mol(-1), DeltaS(++) = -121 +/-18 J K(-1) mol(-1), DeltaV(++) = -18.5 +/- 0.4 cm3 mol(-1) at 25 degrees C). The subsequent electron transfer step to form Ru(II)-NO+ occurs spontaneously for the trans isomer, followed by a slow nitrosyl to nitrite conversion, whereas for the cis isomer the reduction of the Ru(III) center is induced by the coordination of an additional NO molecule (cis isomer, k2=51.3 +/- 0.3 M(-1) s(-1), DeltaH(++) = 46 +/- 2 kJ mol(-1), DeltaS(++) = -69 +/- 5 J K(-1) mol(-1), DeltaV(++) = -22.6 +/- 0.2 cm3 mol(-1) at 45 degrees C). The final reaction step involves a slow aquation process for both isomers, which is interpreted in terms of a dissociative substitution mechanism (cis isomer, DeltaV(++) = +23.5 +/- 1.2 cm3 mol(-1); trans isomer, DeltaV(++) = +20.9 +/- 0.4 cm3 mol(-1) at 55 degrees C) that produces two different reaction products, viz. [Ru(terpy)(NH3)(H2O)NO]3+ (product of the cis isomer) and trans-[Ru(terpy)(NH3)2(H2O)]2+. The pi-acceptor properties of the tridentate N-donor chelate (terpy) predominantly control the overall reaction pattern.     

Kinetics and mechanism of catalytic decomposition and oxidation of chlorine dioxide by the hypochlorite ion

The oxidation of ClO(2) by OCl(-)is first order with respect to both reactants in the neutral to alkaline pH range: -d[ClO(2)]/dt = 2k(OCl)[ClO(2)][OCl(-)]. The rate constant (T = 298 K, mu = 1.0 M NaClO(4)) and activation parameters are k(OCl) = 0.91 +/- 0.02 M(-1) s(-1), DeltaH = 66.5 +/- 0.9 kJ/mol, and DeltaS(++) = -22.3 +/- 2.9 J/(mol K). In alkaline solution, pH > 9, the primary products of the reaction are the chlorite and chlorate ions and consumption of the hypochlorite ion is not observed. The hypochlorite ion is consumed in increasing amounts, and the production of the chlorite ion ceases when the pH is decreased. The stoichiometry is kinetically controlled, and the reactants/products ratios are determined by the relative rates of the production and consumption of the chlorite ion in the ClO(2)/OCl(-) and HOCl/ClO(2)(-) reactions, respectively.     

Stepwise oxidation of anilines by cis-[RuIV(bpy)2(py)(O)]2+

The net six-electron oxidation of aniline to nitrobenzene or azoxybenzene by cis-[Ru(IV)(bpy)(2)(py)(O)](2+) (bpy is 2,2'-bipyridine; py is pyridine) occurs in a series of discrete stages. In the first, initial two-electron oxidation is followed by competition between oxidative coupling with aniline to give 1,2-diphenylhydrazine and capture by H(2)O to give N-phenylhydroxylamine. The kinetics are first order in aniline and first order in Ru(IV) with k(25.1 degrees C, CH(3)CN) = (2.05 +/- 0.18) x 10(2) M(-1) s(-1) (DeltaH(++) = 5.0 +/- 0.7 kcal/mol; DeltaS(++) = -31 +/- 2 eu). On the basis of competition experiments, k(H)2(O)/k(D)2(O) kinetic isotope effects, and the results of an (18)O labeling study, it is concluded that the initial redox step probably involves proton-coupled two-electron transfer from aniline to cis-[Ru(IV)(bpy)(2)(py)(O)](2+) (Ru(IV)=O(2+)). The product is an intermediate nitrene (PhN) or a protonated nitrene (PhNH(+)) which is captured by water to give PhNHOH or aniline to give PhNHNHPh. In the following stages, PhNHOH, once formed, is rapidly oxidized by Ru(IV)=O(2+) to PhNO and PhNHNHPh to PhN=NPh. The rate laws for these reactions are first order in Ru(IV)=O(2+) and first order in reductant with k(14.4 degrees C, H(2)O/(CH(3))(2)CO) = (4.35 +/- 0.24) x 10(6) M(-1) s(-1) for PhNHOH and k(25.1 degrees C, CH(3)CN) = (1.79 +/- 0.14) x 10(4) M(-1) s(-1) for PhNHNHPh. In the final stages of the six-electron reactions, PhNO is oxidized to PhNO(2) and PhN=NPh to PhN(O)=NPh. The oxidation of PhNO is first order in PhNO and in Ru(IV)=O(2+) with k(25.1 degrees C, CH(3)CN) = 6.32 +/- 0.33 M(-1) s(-1) (DeltaH(++) = 4.6 +/- 0.8 kcal/mol; DeltaS(++) = -39 +/- 3 eu). The reaction occurs by O-atom transfer, as shown by an (18)O labeling study and by the appearance of a nitrobenzene-bound intermediate at low temperature.     

Chlorine dioxide reduction by aqueous iron(II) through outer-sphere and inner-sphere electron-transfer pathways

The reduction of ClO(2) to ClO(2)(-) by aqueous iron(II) in 0.5 M HClO(4) proceeds by both outer-sphere (86%) and inner-sphere (14%) electron-transfer pathways. The second-order rate constant for the outer-sphere reaction is 1.3 x 10(6) M(-1) s(-1). The inner-sphere electron-transfer reaction takes place via the formation of FeClO(2)(2+) that is observed as an intermediate. The rate constant for the inner-sphere path (2.0 x 10(5) M(-1) s(-1)) is controlled by ClO(2) substitution of a coordinated water to give an inner-sphere complex between ClO(2) and Fe(II) that very rapidly transfers an electron to give (Fe(III)(ClO(2)(-))(H(2)O)(5)(2+))(IS). The composite activation parameters for the ClO(2)/Fe(aq)(2+) reaction (inner-sphere + outer-sphere) are the following: DeltaH(r)++ = 40 kJ mol(-1); DeltaS(r)++ = 1.7 J mol(-1) K(-1). The Fe(III)ClO(2)(2+) inner-sphere complex dissociates to give Fe(aq)(3+) and ClO(2)(-) (39.3 s(-1)). The activation parameters for the dissociation of this complex are the following: DeltaH(d)++= 76 kJ mol(-1); DeltaS(d)++= 32 J K(-1) mol(-1). The reaction of Fe(aq)(2+) with ClO(2)(-) is first order in each species with a second-order rate constant of k(ClO2)- = 2.0 x 10(3) M(-1) s(-1) that is five times larger than the rate constant for the Fe(aq)(2+) reaction with HClO(2) in H(2)SO(4) medium ([H(+)] = 0.01-0.13 M). The composite activation parameters for the Fe(aq)(2+)/Cl(III) reaction in H(2)SO(4) are DeltaH(Cl(III))++ = 41 kJ mol(-1) and DeltaS(Cl(III))++ = 48 J mol(-1) K(-1).     

Synthesis, structure, and substitution mechanism of new Ru(II) complexes containing 1,4,7-trithiacyclononane and 1,10-phenanthroline ligands

Two new Ru complexes containing the 1,10-phenanthroline (phen) and 1,4,7-trithiacyclononane ([9]aneS3, SCH2CH2SCH2CH2SCH2CH2) ligands of general formula [Ru(phen)(L)([9]aneS3)]2+ (L = MeCN, 3; L = pyridine (py), 4) have been prepared and thoroughly characterized. Structural characterization in the solid state has been performed by means of X-ray diffraction analyses, which show a distorted octahedral environment for a diamagnetic d6 Ru(II), as expected. 1H NMR spectroscopy provides evidence that the same structural arrangement is maintained in solution. Further spectroscopic characterization has been carried out by UV-vis spectroscopy where the higher acceptor capability of MeCN versus the py ligand is manifested in a 9-15-nm blue shift in its MLCT bands. The E1/2 redox potential of the Ru(III)/Ru(II) couple for 3 is anodically shifted with respect to its Ru-py analogue, 4, by 60 mV, which is also in agreement with a higher electron-withdrawing capacity of the former. The mechanism for the reaction Ru-py + MeCN--> Ru-MeCN + py has also been investigated at different temperatures with and without irradiation. In the absence of irradiation at 326 K, the thermal process gives kinetic constants of k2 = 1.4 x 10(-5) s(-1) (DeltaH(++) = 108 +/- 3 kJ mol(-1), DeltaS(++) = -8 +/- 9 J K(-1) mol(-1)) and k-2 = 2.9 x 10(-6) s(-1) (DeltaH(++) = 121 +/- 1 kJ mol(-1), DeltaS(++) = 18 +/- 3 J K(-1) mol(-1)). The phototriggered process is faster and consists of preequilibrium formation of an intermediate that thermally decays to the final Ru-MeCN complex with an apparent rate constant of (k1Khnu)app = 1.8 x 10(-4) s(-1) at 304 K, under the continuous irradiation experimental conditions used.     

Triggering water exchange mechanisms via chelate architecture. Shielding of transition metal centers by aminopolycarboxylate spectator ligands

Paramagnetic effects on the relaxation rate and shift difference of the (17)O nucleus of bulk water enable the study of water exchange mechanisms on transition metal complexes by variable temperature and variable pressure NMR. The water exchange kinetics of [Mn(II)(edta)(H2O)](2-) (CN 7, hexacoordinated edta) was reinvestigated and complemented by variable pressure NMR data. The results revealed a rapid water exchange reaction for the [Mn(II)(edta)(H2O)](2-) complex with a rate constant of k(ex) = (4.1 +/- 0.4) x 10(8) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH(double dagger), DeltaS(double dagger), and DeltaV(double dagger) are 36.6 +/- 0.8 kJ mol(-1), +43 +/- 3 J K(-1) mol(-1), and +3.4 +/- 0.2 cm(3) mol(-1), which are in line with a dissociatively activated interchange (I(d)) mechanism. To analyze the structural influence of the chelate, the investigation was complemented by studies on complexes of the edta-related tmdta (trimethylenediaminetetraacetate) chelate. The kinetic parameters for [Fe(II)(tmdta)(H2O)](2-) are k(ex) = (5.5 +/- 0.5) x 10(6) s(-1) at 298.2 K, DeltaH(double dagger) = 43 +/- 3 kJ mol(-1), DeltaS(double dagger) = +30 +/- 13 J K(-1) mol(-1), and DeltaV(double dagger) = +15.7 +/- 1.5 cm(3) mol(-1), and those for [Mn(II)(tmdta)(H2O)](2-) are k(ex) = (1.3 +/- 0.1) x 10(8) s(-1) at 298.2 K, DeltaH(double dagger) = 37.2 +/- 0.8 kJ mol(-1), DeltaS(double dagger) = +35 +/- 3 J K(-1) mol(-1), and DeltaV(double dagger) = +8.7 +/- 0.6 cm(3) mol(-1). The water containing species, [Fe(III)(tmdta)(H2O)](-) with a fraction of 0.2, is in equilibrium with the water-free hexa-coordinate form, [Fe(III)(tmdta)](-). The kinetic parameters for [Fe(III)(tmdta)(H2O)](-) are k(ex) = (1.9 +/- 0.8) x 10(7) s(-1) at 298.2 K, DeltaH(double dagger) = 42 +/- 3 kJ mol(-1), DeltaS(double dagger) = +36 +/- 10 J K(-1) mol(-1), and DeltaV(double dagger) = +7.2 +/- 2.7 cm(3) mol(-1). The data for the mentioned tmdta complexes indicate a dissociatively activated exchange mechanism in all cases with a clear relationship between the sterical hindrance that arises from the ligand architecture and mechanistic details of the exchange process for seven-coordinate complexes. The unexpected kinetic and mechanistic behavior of [Ni(II)(edta')(H2O)](2-) and [Ni(II)(tmdta')(H2O)](2-) is accounted for in terms of the different coordination number due to the strong preference for an octahedral coordination environment and thus a coordination equilibrium between the water-free, hexadentate [M(L)](n+) and the aqua-pentadentate forms [M(L')(H2O)](n+) of the Ni(II)-edta complex, which was studied in detail by variable temperature and pressure UV-vis experiments. For [Ni(II)(edta')(H2O)](2-) (CN 6, pentacoordinated edta) a water substitution rate constant of (2.6 +/- 0.2) x 10(5) s(-1) at 298.2 K and ambient pressure was measured, and the activation parameters DeltaH(double dagger), DeltaS(double dagger), and DeltaV(double dagger) were found to be 34 +/- 1 kJ mol(-1), -27 +/- 2 J K(-1) mol(-1), and +1.8 +/- 0.1 cm(3) mol(-1), respectively. For [Ni(II)(tmdta')(H2O)](2-), we found k = (6.4 +/- 1.4) x 10(5) s(-1) at 298.2 K, DeltaH(double dagger) = 22 +/- 4 kJ mol(-1), and DeltaS(double dagger) = -59 +/- 5 J K(-1) mol(-1). The process is referred to as a water substitution instead of a water exchange reaction, since these observations refer to the intramolecular displacement of coordinated water by the carboxylate moiety in a ring-closure reaction.     

Thermodynamics of light-induced and thermal degradation of bacteriochlorins in reaction center protein of photosynthetic bacteria

The rate constants of thermal (irreversible) damage of bacteriochlorin pigments (bacteriochlorophyll monomer [B], bacteriochlorophyll dimer [P] and bacteriopheophytine [H]) in reaction center [RC] protein from the photosynthetic bacterium Rhodobacter sphaeroides were studied in the dark and during intense (400 mW x cm(-2)) laser light excitation (wavelengths 488 and 515 nm) under deoxygenated conditions. While the kinetics of degradation of P and B were monoexponential, the decay kinetics of H were overlapped by an initial lag phase at elevated (>40 degrees C) temperature. This is explained by removal of the central metal ion from the bacteriochlorophylls as part of their degradation processes. At all temperatures, the rates of damage were very similar for all bacteriochlorin pigments and were larger in the light than in the dark. The logarithm of the rate constant of pigment degradation and loss of photochemistry as a function of reciprocal (absolute) temperature (Arrhenius/Eyring plot) showed single phase in the light and double phases in the dark. Below 20 degrees C, the rate of pigment degradation in the RC decreased so dramatically in the dark that it became limited by the natural degradation process of bacteriochlorophyll measured in solution. The function of loss of photochemistry in the dark was also biphasic and had a break point at 40 degrees C. The damage in the dark required high enthalpy change (DeltaH(++) = 64 kcal/mol for P and DeltaH(++) = 60 kcal/mol for B) and entropy increase (T x DeltaS(++) = 38 kcal/mol for P and T x DeltaS(++) = 34 kcal/mol for B at T = 300 K), whereas significantly smaller enthalpy change (DeltaH(++) = 21 kcal/mol for P and B and DeltaH(++) = 13 kcal/mol for H) and practically no (T x DeltaS(++) = -1 kcal/mol for P and B at T = 300 K) or small (T x DeltaS(++) = -9 kcal/mol for H at T = 300 K) entropy change was needed in the light. The thermodynamic parameters of activation reveal major steps common in the degradation of all bacteriochlorin pigments: ring opening reactions at C5 or C20 meso-bridges (or both) and breaking/removal of the phytyl chain. Their contribution in the degradation is probably reflected in the observed enthalpy/entropy compensation at an almost constant (DeltaG(++) = 22-26 kcal/mol at T = 300 K) free energy change of activation.     

The rate of O2 and CO binding to a copper complex, determined by a "flash-and-trap" technique, exceeds that for hemes

The observation and fast time-scale kinetic determination of a primary dioxygen-copper interaction have been studied. The ability to photorelease carbon monoxide from [Cu(I)(tmpa)(CO)](+) in mixtures of CO and O(2) in tetrahydrofuran (THF) between 188 and 218 K results in the observable formation of a copper-superoxide species, [Cu(II)(tmpa)(O(2)(-))](+) lambda(max) = 425 nm. Via this "flash-and-trap" technique, temperature-dependent kinetic studies on the forward reaction between dioxygen and [Cu(I)(tmpa)(thf)](+) afford activation parameters DeltaH = 7.62 kJ/mol and DeltaS = -45.1 J/mol K. The corresponding reverse reaction proceeds with DeltaH = 58.0 kJ/mol and DeltaS = 105 J/mol K. Overall thermodynamic parameters are DeltaH degrees = -48.5 kJ/mol and DeltaS degrees = -140 J/mol K. The temperature-dependent data allowed us to determine the room-temperature second-order rate constant, k(O2) = 1.3 x 10(9) M(-1) s(-1). Comparisons to copper and heme proteins and synthetic complexes are discussed.     

Nitrogen-14 NMR Study on Solvent Exchange of the Octahedral Cobalt(II) Ion in Neat 1,3-Propanediamine and n-Propylamine at Various Temperatures and Pressures. Tetrahedral-Octahedral Equilibrium of the Solvated Cobalt(II) Ion in n-Propylamine As Studied by EXAFS and Electronic Absorption Spectroscopy

Solvated cobalt(II) ions in neat 1,3-propanediamine (tn) and n-propylamine (pa) have been characterized by electronic absorption spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. The equilibrium between tetrahedral and octahedral geometry for cobalt(II) ion has been observed in a neat pa solution, but not in neat diamine solutions such as tn and ethylenediamine (en). The thermodynamic parameters and equilibrium constant at 298 K for the geometrical equilibrium in pa were determined to be DeltaH degrees = -36.1 +/- 2.3 kJ mol(-1), DeltaS degrees = -163 +/- 8 J mol(-1) K(-1), and K(298) = 6.0 x 10(-3) M(-2), where K = [Co(pa)(6)(2+)]/{[Co(pa)(4)(2+)][pa](2)}. The equilibrium is caused by the large entropy gain in formation of the tetrahedral cobalt(II) species. The solvent exchange of cobalt(II) ion with octahedral geometry in tn and pa solutions has been studied by the (14)N NMR line-broadening method. The activation parameters and rate constants at 298 K for the solvent exchange reactions are as follows: DeltaH() = 49.3 +/- 0.9 kJ mol(-1), DeltaS() = 25 +/- 3 J mol(-1) K(-1), DeltaV() = 6.6 +/- 0.3 cm(3) mol(-1) at 302.1 K, and k(298) = 2.9 x 10(5) s(-1) for the tn exchange, and DeltaH() = 36.2 +/- 1.2 kJ mol(-1), DeltaS() = 35 +/- 6 J mol(-1) K(-1), and k(298) = 2.0 x 10(8) s(-1) for the pa exchange. By comparison of the activation parameters with those for the en exchange of cobalt(II) ion, it has been confirmed that the kinetic chelate strain effect is attributed to the large activation enthalpy for the bidentate chelate opening and that the enthalpic effect is smaller in the case of the six-membered tn chelate compared with the five-membered en chelate.     

Synthesis, structure, and molecular dynamics of gallium complexes of schizokinen and the amphiphilic siderophore acinetoferrin

A new general synthesis of the citrate-based siderophores acinetoferrin (Af) and schizokinen (Sz) and their analogues is described. The molecular structure of gallium schizokinen, GaSz, was determined by combined (1)H NMR, Hartree-Fock ab initio calculations, DFT, and empirical modeling of vicinal proton NMR spin-spin couplings. The metal-coordination geometry of GaSz was determined from NOE contacts to be cis-cis with respect to the two chelating hydroxamates. One diaminopropane adopts a single chairlike conformation while another is a mixture of two ring pucker arrangements. Both amide hydrogens are internally hydrogen bonded to metal-ligating oxygen atoms. The acyl methyl groups are directed away from each other with an average planar angle of ca. 130 degrees. The kinetics of GaSz racemization were followed by selective, double spin-echo inversion-recovery (1)H NMR spectroscopy over the temperature range of 10-45 degrees C. The racemization proceeds by a multistep mechanism that is proton independent between pD 5 and 12 (k(0) = 1.47 (0.15 s(-1))) and acid catalyzed below pD 4 (k(1) = 2.25 (0.15) x 10(4) M(-1) s(-1)). The activation parameters found for the two sequential steps of the proton independent pathway were DeltaH(++) = 25 +/- 3 kcal M(-1), DeltaS(++) = 25 +/- 7 cal M(-1) K(-1) and DeltaH(++) = 17.1 +/- 0.2 kcal M(-1), DeltaS(++) = 0.3 +/- 2.7 cal M(-1) K(-1). The first step of the proton-independent mechanism was assigned to the dissociation of the carboxyl group. The second step was assigned to complex racemization. The proton-assisted step was assigned to a complete dissociation of the alpha-hydroxy carboxyl group at pD < 4. The ab initio modeling of gallium acinetoferrin, GaAf, and analogues derived from the structure of GaSz has shown that the pendant trans-octenoyl fragments are oriented in opposite directions with the average planar angle of ca. 130 degrees. This arrangement prevents GaAf from adopting a phospholipid-like structural motif. Significantly, iron siderophore complex FeAf was found to be disruptive to phospholipid vesicles and is considerably more hydrophilic than Af, with an eight-fold smaller partition coefficient.     

Formation and reactivity of Ir(III) hydroxycarbonyl complexes

Kinetic studies show that the reaction of [TpIr(CO)2] (1, Tp = hydrotris(pyrazolyl)borate) with water to give [TpIr(CO2H)(CO)H] (2) is second order (k = 1.65 x 10(-4) dm(3) mol(-1) s(-1), 25 degrees C, MeCN) with activation parameters DeltaH++= 46+/-2 kJ mol(-1) and DeltaS++ = -162+/-5 J K(-1) mol(-1). A kinetic isotope effect of k(H2O)/k(D2O) = 1.40 at 20 degrees C indicates that O-H/D bond cleavage is involved in the rate-determining step. Despite being more electron rich than 1, [Tp*Ir(CO)2] (1*, Tp* = hydrotris(3,5-dimethylpyrazolyl)borate) reacts rapidly with adventitious water to give [Tp*Ir(CO2H)(CO)H] (2*). A proposed mechanism consistent with the relative reactivity of 1 and 1* involves initial protonation of Ir(I) followed by nucleophilic attack on a carbonyl ligand. An X-ray crystal structure of 2* shows dimer formation via pairwise H-bonding interactions of hydroxycarbonyl ligands (r(O...O) 2.65 A). Complex 2* is thermally stable but (like 2) is amphoteric, undergoing dehydroxylation with acid to give [Tp*Ir(CO)2H]+ (3*) and decarboxylation with OH- to give [TpIr(CO)H2] (4*). Complex 2 undergoes thermal decarboxylation above ca. 50 degrees C to give [TpIr(CO)H2] (4) in a first-order process with activation parameters DeltaH++ = 115+/-4 kJ mol(-1) and DeltaS++ = 60+/-10 J K(-1) mol(-1).     

Mechanistic diversity covering 15 orders of magnitude in rates: cyanide exchange on [M(CN)(4)](2-) (M = Ni, Pd, and Pt)

Kinetic studies of cyanide exchange on [M(CN)(4)](2-) square-planar complexes (M = Pt, Pd, and Ni) were performed as a function of pH by (13)C NMR. The [Pt(CN)(4)](2-) complex has a purely second-order rate law, with CN(-) as acting as the nucleophile, with the following kinetic parameters: (k(2)(Pt,CN))(298) = 11 +/- 1 s(-1) mol(-1) kg, DeltaH(2) (Pt,CN) = 25.1 +/- 1 kJ mol(-1), DeltaS(2) (Pt,CN) = -142 +/- 4 J mol(-1) K(-1), and DeltaV(2) (Pt,CN) = -27 +/- 2 cm(3) mol(-1). The Pd(II) metal center has the same behavior down to pH 6. The kinetic parameters are as follows: (k(2)(Pd,CN))(298) = 82 +/- 2 s(-1) mol(-1) kg, DeltaH(2) (Pd,CN) = 23.5 +/- 1 kJ mol(-1), DeltaS(2) (Pd,CN) = -129 +/- 5 J mol(-1) K(-1), and DeltaV(2) (Pd,CN) = -22 +/- 2 cm(3) mol(-1). At low pH, the tetracyanopalladate is protonated (pK(a)(Pd(4,H)) = 3.0 +/- 0.3) to form [Pd(CN)(3)HCN](-). The rate law of the cyanide exchange on the protonated complex is also purely second order, with (k(2)(PdH,CN))(298) = (4.5 +/- 1.3) x 10(3) s(-1) mol(-1) kg. [Ni(CN)(4)](2-) is involved in various equilibrium reactions, such as the formation of [Ni(CN)(5)](3-), [Ni(CN)(3)HCN](-), and [Ni(CN)(2)(HCN)(2)] complexes. Our (13)C NMR measurements have allowed us to determine that the rate constant leading to the formation of [Ni(CN)(5)](3-) is k(2)(Ni(4),CN) = (2.3 +/- 0.1) x 10(6) s(-1) mol(-1) kg when the following activation parameters are used: DeltaH(2)() (Ni,CN) = 21.6 +/- 1 kJ mol(-1), DeltaS(2) (Ni,CN) = -51 +/- 7 J mol(-1) K(-1), and DeltaV(2) (Ni,CN) = -19 +/- 2 cm(3) mol(-1). The rate constant of the back reaction is k(-2)(Ni(4),CN) = 14 x 10(6) s(-1). The rate law pertaining to [Ni(CN)(2)(HCN)(2)] was found to be second order at pH 3.8, and the value of the rate constant is (k(2)(Ni(4,2H),CN))(298) = (63 +/- 15) x10(6) s(-1) mol(-1) kg when DeltaH(2) (Ni(4,2H),CN) = 47.3 +/- 1 kJ mol(-1), DeltaS(2) (Ni(4,2H),CN) = 63 +/- 3 J mol(-1) K(-1), and DeltaV(2) (Ni(4,2H),CN) = - 6 +/- 1 cm(3) mol(-1). The cyanide-exchange rate constant on [M(CN)(4)](2-) for Pt, Pd, and Ni increases in a 1:7:200 000 ratio. This trend is modified at low pH, and the palladium becomes 400 times more reactive than the platinum because of the formation of [Pd(CN)(3)HCN](-). For all cyanide exchanges on tetracyano complexes (A mechanism) and on their protonated forms (I/I(a) mechanisms), we have always observed a pure second-order rate law: first order for the complex and first order for CN(-). The nucleophilic attack by HCN or solvation by H(2)O is at least nine or six orders of magnitude slower, respectively than is nucleophilic attack by CN(-) for Pt(II), Pd(II), and Ni(II), respectively.     

Kinetics of Water Exchange on the Dihydroxo-Bridged Rhodium(III) Hydrolytic Dimer

()()Conventional (18)O isotopic labeling techniques have been used to measure the water exchange rates on the Rh(III) hydrolytic dimer [(H(2)O)(4)Rh(&mgr;-OH)(2)Rh(H(2)O)(4)](4+) at I = 1.0 M for 0.08 < [H(+)] < 0.8 M and temperatures between 308.1 and 323.1 K. Two distinct pathways of water exchange into the bulk solvent were observed (k(fast) and k(slow)) which are proposed to correspond to exchange of coordinated water at positions cis and trans to bridging hydroxide groups. This proposal is supported by (17)O NMR measurements which clearly showed that the two types of water ligands exchange at different rates and that the rates of exchange matched those from the (18)O labeling data. No evidence was found for the exchange of label in the bridging OH groups in either experiment. This contrasts with findings for the Cr(III) dimer. The dependence of both k(fast) and k(slow) on [H(+)] satisfied the expression k(obs) = (k(O)[H(+)](tot) +k(OH)K(a1))/([H(+)](tot) + K(a1)) which allows for the involvement of fully protonated and monodeprotonated Rh(III) dimer. The following rates and activation parameters were determined at 298 K. (i) For fully protonated dimer: k(fast) = 1.26 x 10(-)(6) s(-)(1) (DeltaH() = 119 +/- 4 kJ mol(-)(1) and DeltaS() = 41 +/- 12 J K(-)(1) mol(-)(1)) and k(slow) = 4.86 x 10(-)(7) s(-)(1) (DeltaH() = 64 +/- 9 kJ mol(-)(1) and DeltaS() = -150 +/- 30 J K(-)(1) mol(-)(1)). (ii) For monodeprotonated dimer: k(fast) = 3.44 x 10(-)(6) s(-)(1) (DeltaH() = 146 +/- 4 kJ mol(-)(1) and DeltaS() = 140 +/- 11 J K(-)(1) mol(-)(1)) and k(slow) = 2.68 x 10(-)(6) s(-)(1) (DeltaH() = 102 +/- 3 kJ mol(-)(1) and DeltaS() = -9 +/- 11 J K(-)(1) mol(-)(1)). Deprotonation of the Rh(III) dimer was found to labilize the primary coordination sphere of the metal ions and thus increase the rate of water exchange at positions cis and trans to bridging hydroxides but not to the same extent as for the Cr(III) dimer. Activation parameters and mechanisms for ligand substitution processes on the Rh(III) dimer are discussed and compared to those for other trivalent metal ions and in particular the Cr(III) dimer.     

Mechanistic investigations of the palladium-catalyzed aerobic oxidative kinetic resolution of secondary alcohols using (-)-sparteine

The mechanistic details of the Pd(II)/(-)-sparteine-catalyzed aerobic oxidative kinetic resolution of secondary alcohols were elucidated, and the origin of asymmetric induction was determined. Saturation kinetics were observed for rate dependence on [(-)-sparteine]. First-order rate dependencies were observed for both the Pd((-)-sparteine)Cl(2) concentration and the alcohol concentration at high and low [(-)-sparteine]. The oxidation rate was inhibited by addition of (-)-sparteine HCl. At low [(-)-sparteine], Pd-alkoxide formation is proposed to be rate limiting, while at high [(-)-sparteine], beta-hydride elimination is proposed to be rate determining. These conclusions are consistent with the measured kinetic isotope effect of k(H)/k(D) = 1.31 +/- 0.04 and a Hammett rho value of -1.41 +/- 0.15 at high [(-)-sparteine]. Calculated activation parameters agree with the change in the rate-limiting step by increasing [(-)-sparteine] with DeltaH(++) = 11.55 +/- 0.65 kcal/mol, DeltaS(++) = -24.5 +/- 2.0 eu at low [(-)-sparteine], and DeltaH(++) = 20.25 +/- 0.89 kcal/mol, DeltaS() = -5.4 +/- 2.7 eu at high [(-)-sparteine]. At high [(-)-sparteine], the selectivity is influenced by both a thermodynamic difference in the stability of the diastereomeric Pd-alkoxides formed and a kinetic beta-hydride elimination to maximize asymmetric induction. At low [(-)-sparteine], the selectivity is influenced by kinetic deprotonation, resulting in lower k(rel) values. A key, nonintuitive discovery is that (-)-sparteine plays a dual role in this oxidative kinetic resolution of secondary alcohols as a chiral ligand on palladium and as an exogenous chiral base.     

A detailed mechanistic study of the substitution behavior of an unusual seven-coordinate iron(III) complex in aqueous solution

A detailed mechanistic study of the substitution behavior of a 3d metal heptacoordinate complex, with a rare pentagonal-bipyramidal structure, was undertaken to resolve the solution chemistry of this system. The kinetics of the complex-formation reaction of [Fe(dapsox)(H(2)O)(2)]ClO(4) (H(2)dapsox = 2,6-diacetylpyridine-bis(semioxamazide)) with thiocyanate was studied as a function of thiocyanate concentration, pH, temperature, and pressure. The reaction proceeds in two steps, which are both base-catalyzed due to the formation of an aqua-hydroxo complex (pK(a1) = 5.78 +/- 0.04 and pK(a2) = 9.45 +/- 0.06 at 25 degrees C). Thiocyanate ions displace the first coordinated water molecule in a fast step, followed by a slower reaction in which the second thiocyanate ion coordinates trans to the N-bonded thiocyanate. At 25 degrees C and pH <4.5, only the first reaction step can be observed, and the kinetic parameters (pH 2.5: k(f(I)) = 2.6 +/- 0.1 M(-1) s(-1), DeltaH(#)(f(I)) = 62 +/- 3 kJ mol(-1), DeltaS(#)(f(I)) = -30 +/- 10 J K(-1) mol(-1), and DeltaV(#)(f(I)) = -2.5 +/- 0.2 cm(3) mol(-1)) suggest the operation of an I(a) mechanism. In the pH range 2.5 to 5.2 this reaction step involves the participation of both the diaqua and aqua-hydroxo complexes, for which the complex-formation rate constants were found to be 2.19 +/- 0.06 and 1172 +/- 22 M(-1) s(-1) at 25 degrees C, respectively. The more labile aqua-hydroxo complex is suggested to follow an I(d) or D substitution mechanism on the basis of the reported kinetic data. At pH > or =4.5, the second substitution step also can be monitored (pH 5.5 and 25 degrees C: k(f(II)) = 21.1 +/- 0.5 M(-1) s(-1), DeltaH(#)(f(II)) = 60 +/- 2 kJ mol(-1), DeltaS(#)(f(II)) = -19 +/- 6 J K(-1) mol(-1), and DeltaV(#)(f(II)) = +8.8 +/- 0.3 cm(3) mol(-1)), for which an I(d) or D mechanism is suggested. The results are discussed in terms of known structural parameters and in comparison to relevant structural and kinetic data from the literature.     

Seven-coordinate iron complex as a ditopic receptor for lithium salts: study of host-guest interactions and substitution behavior

Interactions between the seven-coordinate tweezerlike [Fe(dapsox)(H2O)2]ClO4 complex (H2dapsox = 2,6-diacetylpyridine-bis(semioxamazide)) with different lithium salts (LiOTf, LiClO4, LiBF4, and LiPF6) in CH3CN have been investigated by electrochemical, spectrophotometric, 7Li and 19F NMR, kinetic, and DFT methods. It has been demonstrated that this complex acts as ditopic receptor, showing spectral and electrochemical ion-pair-sensing capability for different lithium salts. In general, the apparent binding constants for lithium salts increase in the order LiOTf < LiClO4 < LiBF4. From the electrochemical measurements, the apparent lithium salt binding constants for the Fe(III) and Fe(II) forms of the complex have been obtained, suggesting a stronger host-guest interaction with the reduced form of the complex. In the presence of LiPF6, the solution chemistry is more complex because of the hydrolysis of PF6-. The kinetics of the complexation of [Fe(dapsox)(CH3CN)2]+ by thiocyanate at -15 degrees C in acetonitrile in the presence of 0.2 M NBu4OTf shows two steps with the following rate constants and activation parameters: k(1) = 411 +/- 14 M(-1) s(-1); DeltaH(1) not equal = 9 +/- 2 kJ mol(-1); DeltaS1 not equal = -159 +/- 6 J K(-1) mol(-1); k(2) = 52 +/- 1 M(-1) s(-1); DeltaH(2) not equal = 4 +/- 1 kJ mol(-1); DeltaS(2) not equal = -195 +/- 3 J K(-1) mol(-1). The very negative DeltaS not equal values are consistent with an associative (A) mechanism. Under the same conditions but with 0.2 M LiOTf, k1Li and k2Li are 1605 +/- 51 and 106 +/- 2 M(-1) s(-1), respectively. The increased rate constants for the {[Fe(dapsox)(CH3CN)2] x LiOTf}+ adduct are in agreement with an associative mechanism. Kinetic and spectrophotometric titration measurements show stronger interaction between the lithium salt and the anion-substituted forms, [Fe(dapsox)(CH3CN)(NCS)] and [Fe(dapsox)(NCS)2]-, of the complex. These experiments demonstrate that in nonaqueous media lithium salts cannot be simply used as supporting electrolytes, since they can affect the kinetic behavior of the studied complex. DFT calculations revealed that the negatively charged alpha-oxyazine oxygen atoms are responsible for cation binding (electrostatic interactions), whereas the two terminal amide groups bind the anion via hydrogen bonding.     

The impact of tripodal chelates on water exchange kinetics and mechanisms: a variable temperature and pressure 17O NMR study to clarify the structure-reactivity relationship in [Fe(II)(L)(H2O2](-) complexes

The effect of temperature and pressure on the water exchange reaction of [Fe(II)(NTA)(H2O)2](-) and [Fe(II)(BADA)(H2O)2](-) (NTA = nitrilotriacetate; BADA = beta-alanindiacetate) was studied by 17O NMR spectroscopy. The [Fe(II)(NTA)(H2O)2](-) complex showed a water exchange rate constant, k(ex), of (3.1 +/- 0.4) x 10(6) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH( not equal), DeltaS( not equal) and DeltaV( not equal) for the observed reaction are 43.4 +/- 2.6 kJ mol(-1), + 25 +/- 9 J K(-1) mol(-1) and + 13.2 +/- 0.6 cm(3) mol(-1), respectively. For [Fe(II)(BADA)(H2O)2](-), the water exchange reaction is faster than for the [Fe(II)(NTA)(H2O)2](-) complex with k(ex) = (7.4 +/- 0.4) x 10(6) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH( not equal), DeltaS( not equal) and DeltaV( not equal) for the water exchange reaction are 40.3 +/- 2.5 kJ mol(-1), + 22 +/- 9 J K(-1) mol(-1) and + 13.3 +/- 0.8 cm(3) mol(-1), respectively. The effect of pressure on the exchange rate constant is large and very similar for both systems, and the numerical values for DeltaV( not equal) suggest in both cases a limiting dissociative (D) mechanism for the water exchange process.     

Thermodynamic and kinetic studies on the reaction between the vitamin B12 derivative beta-(N-methylimidazolyl)cobalamin and N-methylimidazole: ligand displacement at the alpha axial site of cobalamins

The equilibria and kinetics of substitution of the 5,6-dimethylbenzimidazole at the alpha site of beta-(N-methylimidazolyl)cobalamin by N-methylimidazole have been investigated, and the product, bis(N-methylimidazolyl)cobalamin, has been characterized by visible and 1H NMR spectroscopies. The equilibrium constant for (N-MeIm)Cbl+ + N-MeIm right harpoon over left harpoon (N-MeIm)2Cbl+ was determined by 1H NMR spectroscopy (9.6 +/- 0.1 M(-1), 25.0 degrees C, I = 1.5 M (NaClO4)). The observed rate constant for this reaction exhibits an unusual inverse dependence on N-methylimidazole concentration, and it is proposed that substitution occurs via a base-off solvent-bound intermediate. Activation parameters typical for a dissociative ligand substitution mechanism are reported at two different N-MeImT concentrations, 5.00 x 10(-3) M (DeltaH++ = 99 +/- 2 kJ x mol(-1), DeltaS++ = 39 +/- 5 J x mol(-1) x K(-1), DeltaV++ = 15.0 +/- 0.7 cm3 x mol(-1), and 1.00 M (DeltaH++ = 109.4 +/- 0.8 kJ x mol(-1), DeltaS++ = 70 +/- 3 J x mol(-1) x K(-1), DeltaV++ = 16.8 +/- 1.1 cm3 x mol(-1)). According to the proposed mechanism, these parameters correspond to the equation of (N-MeIm)2Cbl+ and the ring-opening reaction of the alpha-DMBI of (N-MeIm)Cbl+ to give the solvent-bound intermediate in both cases, respectively.     

Kinetics and mechanism of ligand substitution in bis(N-alkylsalicylaldiminato)oxovanadium(IV) complexes

Conventional and stopped-flow spectrophotometry was used to to study the kinetics of ligand substitution in a number of bis(N-alkylsalicylaldiminato)oxovanadium(IV) complexes (=VO(R-X-sal)(2)) by 1,1,1- trifluoropentane-2,4-dione (=Htfpd) in acetone, according to the following reaction: VO(R-X-sal)(2) + 2Htfpd --> VO(tfpd)(2) + 2R-X-salH. The acronym R-X-salH refers to N-alkylsalicylaldimines with substituents X = H, Cl, Br, CH(3), and NO(2) in the 5-position of the salicylaldehyde ring and N-alkyl groups R = n-propyl, isopropyl, phenyl, and neopentyl. Under excess conditions ([Htfpd](0) > [VO(R-X-sal)(2)](0)), substitution by Htfpd occurs in two observable steps, as characterized by pseudo-first-order rate constants k(obsd(1)) and k(obsd(2)). Both rate constants increase linearly with [Htfpd](0) according to k(obsd(1)) = k(s(1)) + k(1)[Htfpd](0) and k(obsd(2)) = k(s(2)) + k(2)[Htfpd](0), with k(s(1)) and k(s(2)) describing small contributions of solvent-initiated pathways. Depending on the nature of R and X, second-order rate constants k(1) and k(2) lie in the range 0.098-0.87 M(-1) s(-1) (k(1)) and 0.022-0.41 M(-1) s(-1) (k(2)) at 298 K. For ligand substitution in the system VO(n-propyl-sal)(2)/Htfpd, the activation parameters DeltaH++ = 35.8 +/- 2.8 kJ mol(-1) and DeltaS++ = -146 +/- 23 J K(-1) mol(-1) (k(1)) and DeltaH++ = 40.2 +/- 1.3 kJ mol(-1) and DeltaS++ = -142 +/- 11 J K(-1) mol(-1) (k(2)) were obtained. The Lewis acidity of the complexes VO(n-propyl-X-sal)(2) with X = H, Cl, Br, CH(3), and NO(2) was quantified spectrophotometrically by determination of equilibrium constant K(py), describing the formation of the adduct VO(n-propyl-X-sal)(2).pyridine. The adduct VO(tfpd)(2).n-propyl-salH, formed as product in the system VO(n-propyl-sal)(2)/Htfpd, was characterized by its dissociation constant, K(D) = (3.30 +/- 0.10) x 10(-3) M. The mechanism suggested for the two-step substitution process is based on initial formation of the adducts VO(R-X-sal)(2).Htfpd (step 1) and VO(R-X-sal)(tfpd).Htfpd (step 2).     

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).