The synthesis and XPS characterization of iodine containing plasma polymers

Plasma polymers derived from iodobenzene and four copolymers with benzene of varying monomer ratios have been synthesized. Samples were analyzed for qualitative and quantitative information using x-ray photoelectron spectroscopy. The optimum conditions whereby a higher iodine content is obtained in the plasma polymer have been achieved. The results indicate that the use of a copolymerization approach is better. These plasma polymers were subsequently exposed to an oxygen plasma and it was found that oxidation and etching of the surfaces of the plasma polymers does occur. The extent of iodine loss via oxygen plasma etching appears dependent on the character of the plasma polymer.     

One-dimensional ZnO nanostructure arrays: synthesis and characterization

One-dimensional ZnO nanostructure arrays such as nanowires, nanonails, and nanotrees, have been synthesized by oxygen assisted thermal evaporation of metallic zinc on a quartz substrate over a large area. Morphological evolution of ZnO nanostructures at different time scales and different positions of the substrates have been studied by electron microscopy. A self-catalyzed vapor-liquid-solid (VLS) process is believed to be responsible for the nucleation and subsequently a vapor-solid process is operative for further longitudinal growth. The photoluminescence spectrum showed a weak UV and a broad green emission peak at 3.25 and 2.49 eV, respectively. The latter was attributed to the presence of zinc interstitial defects. Electrical resistivity as a function of temperature showed activated mechanisms to be present. The electrical response of the ZnO nanonail arrays to different gases (CO, NO2, and H2S) indicated that there could be possible application as gas sensors for this material.     

Electrochemical synthesis and magnetic studies of neutral transition metal imidazolates and pyrazolates

Summary The single-step electrochemical synthesis of neutral transition metal complexes of imidazole, pyrazole and their derivatives has been achieved at ambient temperature. The metal was oxidized in an Me₂CO solution of the diazole to yield complexes of the general formula: [M(Iz)₂] (where M = Co, Ni, Cu, Zn; Iz = imidazolate); [M(MeIz)₂] (where M = Co, Ni, Cu, Zn; MeIz = 4-methylimidazolate); [M(PrⁱIz)₂] (where M = Co, Ni, Cu, Zn; PrⁱIz = 2-isopropylimidazolate); [M(pyIz)_n] (where M = Co^III, Cu^II, Zn^II; pyIz = 2-(2-pyridyl)imidazolate); [M(Pz)_n] (where M = Co^III, Ni^II, Cu^II, Zn^II; Pz = pyrazolate); [M(ClPz)_n] and [M(IPz)_n] (where M = Co^III, Ni^II, Cu^II, Zn^II; ClPz = 4-chloropyrazolate; IPz = 4-iodopyrazolate); [M(Me₂Pz)_n] (where M = Co^II, Cu^I, Zn^II; Me₂Pz = 3,5-dimethylpyrazolate) and [M(BrMe₂Pz)_n] (where M = Co^II, Ni^II, Cu^I, Zn^II; BrMe₂Pz = 3,5-dimethyl-4-bromopyrazolate). Vibrational spectra verified the presence of the anionic diazole and electronic spectra confirmed the stereochemistry about the metal centre. Variable temperature (360-90 K) magnetic measurements of the cobalt and copper chelates revealed strong antiferromagnetic interaction between the metal ions in the lattice. Data for the copper complexes were fitted to a Heisenberg (S= ) model for an infinite one-dimensional linear chain, yielding best fit values of J=–62––65cm^–1 andg = 2.02–2.18. Data for the cobalt complexes were fitted to an Ising (S= ) model with J=–4.62––11.7cm^–1 andg = 2.06–2.49.     

Side-chain cholesteric liquid crystalline polymers containing menthol and cholesterol—synthesis and characterization

A series of new cholesteric side-chain liquid crystalline polymers were prepared containing cholesteric monomer and nonmesogenic chiral monomer. All polymers were synthesized by graft polymerization using polymethylhydrosiloxane as backbone. The mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction measurements, and temperature-changing solidistic optical rotation. The chemical structures of the monomers and polymers obtained were confirmed by Fourier transform infrared and proton nuclear magnetic resonance spectra. M₁ showed cholesteric phase during the heating and the cooling cycle. Polymer P₁ were chiral smectic A phase, whereas P₂–P₇ were cholesteric phase. Experimental results demonstrated that nonmesogetic chiral moity offered the possibility of application because of its lower glass-transition temperature, and the glass-transition temperatures and isotropization temperatures reduced, and the ranges of the mesophase temperature changed abruptly at first and then smoothly with increasing the content of chiral agent.     

Chiral polymers containing a carbohydrate moiety: synthesis

This paper reports the preparation of poly(acetal-ethers) by two alternative synthetic pathways (alkaline and acid-catalyzed conditions). Polycondensations of methyl 2,3:4,6-di-O-salicylidene-alpha-D-mannopyranoside (3) (mixtures of endo-H and exo-H dioxolan-2-yl-diastereomers) with 1,4-dibromobutane (4) (method I a and I b) were performed in solvents (DMF, butyl acetate/DMF, DMSO) and were catalyzed by K2CO3/KI or KOH. A similar polymer (6) was formed by the reaction of methyl alpha-D-mannopyranoside (1) and 1,4-bis(2-formylphenoxy)butane (7), catalyzed by p-toluenesulfonic acid (method II). Regardless of conversion or initial comonomer feed ratios, the composition of the polycondensates depended on the reaction conditions, leading to the formation of macrocyclic [1 + 1] (5) and [2 + 2] compounds, which were macromolecules with diverse molecular weights and optical properties. The regioselective polycondensation was examined by 1H NMR spectroscopy of selected polymers. In the case of 5-membered cyclic acetal units, mixtures of the endo-H and exo-H dioxolan-2-yl system, diastereomers were formed in the polymer chain. The macrocycles and linear oligomers were identified by NMR and electrospray mass spectrometry (ESI-MS). Thermodynamically controlled reactions for making macrocycles as well as oligomers in the absence of templates are also discussed.     

Macromolecules containing bipyridine and terpyridine metal complexes: towards metallosupramolecular polymers

The ability of a broad range of N-heterocycles to act as very effective and stable complexation agents for several transition metal ions, such as cobalt(II), copper(II), nickel(II), and ruthenium(II), has long been known in analytical chemistry. This behavior was later utilized in supramolecular chemistry for the construction of highly sophisticated architectures, such as helicates, racks, and grids. The discovery of macromolecules by Staudinger in 1922 opened up avenues towards sophisticated materials with properties hitherto completely unknown. In the last few decades, the combination of macromolecular and supramolecular chemistry has been attempted by developing metal-complexing and metal-containing polymers for a wide variety of applications that range from filtration to catalysis. The stability of the polymer-metal complex is a fundamental requirement for such applications. In this respect, the use of bi- and terpyridines as chelating ligands is highly promising, since these molecules are known to form highly stable complexes with interesting physical properties with transition-metal ions. A large number of different structures have been designed for many different applications, but polymers based on the application of coordinative forces have been prepared in a few cases only. Furthermore, the synthetic procedures applied frequently resulted in low yields. During the last few years, strong efforts have been made in the direction of self-assembling and supramolecular polymers as novel materials with "intelligent" and tunable properties. In this review, an overview of this active area at the interface of supramolecular and macromolecular chemistry is given.     

Synthesis and ab-initio XRPD structure of group 12 imidazolato polymers

Two new 3D homoleptic binary imidazolates, Cd(im)2 and Hg(im)2 (Him = imidazole), as well as [Hg(im)]NO3, containing 1D polycations of [Hg(im)]n(n+) formulation, have been prepared and characterized by ab-initio XRPD methods.     

A thiazole-containing tripodal ligand: synthesis, characterization, and interactions with metal ions and matrix metalloproteinases

A new tripodal ligand, tris[2-(((2-thiazolyl)methylidene)amino)ethyl]amine (Tatren), has been synthesized and characterized by NMR, IR, and UV-visible absorbance spectroscopy and elemental analysis. Tatren forms stable complexes with transition metal ions (Zn(2+), 1; Mn(2+), 2; Co(2+), 3) and the alkaline earth metal ions (Ca(2+), 4; Mg(2+), 5). Single-crystal X-ray structures of 1, 2, and 5 revealed six-coordinate chelate complexes with formula [M(Tatren)](ClO(4))(2) in which the metal centers are coordinated by three thiazolyl N atoms and three acyclic imine N atoms. Crystals of 1, 2, and 5 are monoclinic, P2(1)/c space group. Crystals of 4 are triclinic, P space group. The Ca(2+) complex is eight-coordinate with all N atoms of Tatren and one water molecule coordinated to the metal ion. Spectrophotometric titrations show that formation constants for the chelates of metal ions are >1 in methanol. Free Tatren inhibits the catalytic domain of matrix metalloproteinase-13 (MMP-13, collagenase-3) with K(i) = 3.5 +/- 0.6 microM. Molecular mechanics-based docking calculations suggest that one leg of Tatren coordinates to the catalytic Zn(2+) in MMPs-2, -9, and -13 with significant hydrogen bonding to backbone amide groups. High-level DFT calculations suggest that, in the absence of nonbonded interactions between Tatren and the enzyme, the most stable first coordination sphere of the catalytic Zn(2+) is achieved with three imidazolyl groups from His residues and two imine N atoms from one leg of Tatren. While complexes (1-3) do not inhibit MMP-13 to a significant extent, 4 does (K(i) = 30 +/- 10 microM). Hence, this study shows that tripodal chelating ligands of this class and their Ca(2+) complexes have potential as active-site inhibitors for MMPs.     

Novel copoly(amide-thioamide), synthesis,characterization and behavior in metal ions adsorption

Copoly(amide-thioamide)s synthesized by polycondensation of bis(thioamide-amine)s and terephthaloyl dichloride in N-methyl pyrrolidone with moderate yields, possess inherent viscosity around 0.70 dL/g, and could be easily dissolved in amide-type polar aprotic solvent. The corresponding polythioamide was amorphous and showed a good thermal stability with glass transition temperature of 177°C in nitrogen atmosphere. The synthesized polymers were characterized by ¹H and ¹³C NMR and X-ray diffraction and were used as sorbents for the treatment of waste water containing heavy metals. Various factors affecting the uptake behavior such as concentration and pH were investigated.     

Interface properties of ionic liquids containing metal ions: features and potentialities

Interfaces and surfaces are the regions where important events happen: catalysis, molecular recognition, charge transfer, polymerization, and many other critical processes take place at the boundary between one medium and another. In this article we discuss the interface (liquid/air) properties of ionic liquids (ILs) containing dissolved metal ions with the aim to show the possibility to use metal salts to transform ILs and their surfaces into engineered liquid supports to apply in material sciences, separation procedures or to use as optical devices.     

Coordination polymers of glutaraldehyde with glycine metal complexes: synthesis,spectral characterization,and their biological evaluation

Glycine metal complexes were prepared by the reaction of glycine with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) in 1?:?2 molar ratio. Thereafter their condensation polymerization was done with glutaraldehyde to obtain polymer metal complexes. All the synthesized polymer metal complexes were characterized by elemental analysis, FT-IR, ¹H-NMR, and UV-Vis spectrometry, magnetic susceptibility, and thermogravimetric studies. The analytical data of all the polymers agreed with 1?:?1 molar ratio of metal complex to glutaraldehyde and magnetic moment data suggest that PGG–Mn(II), PGG–Co(II), PGG–Ni(II), and PGG–Cu(II) have an octahedral geometry around the metal atom, whereas the tetrahedral geometry was proposed for PGG–Zn(II) polymer. The PGG–Mn(II) and PGG–Cu(II) showed octahedral geometry. Thermal behavior of the polymer metal complexes was obtained at a heating rate of 10°C?min^?1 under nitrogen atmosphere from 0°C to 800°C. The antimicrobial activities of synthesized polymers were investigated against Streptococcus aureus, Escherichia coli, Bacillus sphaericus, Salmonella sp. (Bacteria), Fusarium oryzae, Candida albicans, and Aspergillus niger (Yeast).     

Molecularly defined caprolactone oligomers and polymers: synthesis and characterization

The synthesis of molecularly defined epsilon-caprolactone oligomers and polymers up to the 64-mer, via an exponential growth strategy, is described. By careful selection of orthogonal protecting groups, t-butyldimethylsilyl (TBDMS) ether for the hydroxyl group and benzyl (Bn) ester for the carboxylic acid group, a highly efficient synthetic strategy was developed with yields for both deprotection steps being essentially quantitative and for the coupling reactions using 1,3-dicyclohexylcarbodiimide (DCC), yields of 80-95% were obtained even at high molecular weights. This allows monodisperse dimers, tetramers, octamers, 16-mers, 32-mers and 64-mers to be prepared in gram quantities and fully characterized using mass spectroscopy, size exclusion chromatography (SEC), and IR and NMR spectroscopy. Thermal and physical properties were measured using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and small-angle X-ray scattering (SAXS). These results conclusively show a distinct structure/property relationship with a close correlation between the number of repeat units and physical properties. In addition, a number of marked differences were observed on comparison with the parent poly(caprolactone) polymer.     

Synthesis and characterization of photorefractive polymers containing indole groups

Some new photorefractive polymers containing indole groups were synthesized and characterized by IR, ¹H NMR, and UV techniques. The Gibbs free energy changes (ΔG) of corresponding reactions were predicted by density functional theory to be 4.19 and ?9.71 kcal mol^?1 for –H, and 4.12 and ?11.93 kcal mol^?1 for –OCH₃, respectively. The glass transition temperature (T _g) of the polymers were about 96–111 °C. The nonlinear second-order optical susceptibility was predicted to be 2.84 × 10^?30 and 1.04 × 10^?30 esu by theoretical quantum calculations.     

Novel metal complexes containing a chiral trinitrogen isoindoline-based pincer ligand: in situ synthesis and structural characterization

The first synthesis and characterization of metal coordinated complexes containing in situ prepared chiral trinitrogen 1,3-bis(4,5-dihydrooxazol-2-ylimino)isoindoline-based pincer ligands are reported. Two zinc complexes, isolated as Zn(L)(2), where L = 1,3-bis(4,5-dihydro-4-(R)-phenyloxazol-2-ylimino)isoindoline ((R,R)-5) or 1,3-bis(4,5-dihydro-4-(S)-iso-propyloxazol-2-ylimino)isoindoline ((S,S)-6), respectively, are reported. Complexes Zn((R,R)-5)(2) and Zn((S,S)-6)(2) were prepared in situ through the condensation of phthalonitrile with enantiopure 2-amino-4-(R)-phenyloxazoline ((R)-3) or 2-amino-4-(S)-iso-propyloxazoline ((S)-4) in the presence of ZnCl(2) at 80 °C in dry toluene over 3-4 days. The characterizations of Zn((R,R)-5)(2) and Zn((S,S)-6)(2) in both the solid (X-ray crystallography) and solution (multinuclear NMR spectroscopy) states are reported.     

Solution synthesis of nanoparticular binary transition metal antimonides

The preparation of nanoengineered materials with controlled nanostructures, for example, with an anisotropic phase segregated structure or a regular periodicity rather than with a broad range of interparticle distances, has remained a synthetic challenge for intermetallics. Artificially structured materials, including multilayers, amorphous alloys, quasicrystals, metastable crystalline alloys, or granular metals, are mostly prepared using physical gas phase procedures. We report a novel, powerful solution-mediated approach for the formation of nanoparticular binary antimonides based on presynthesized antimony nanoparticles. The transition metal antimonides M-Sb (M = Co, Ni, Cu(2), Zn) were obtained with sizes ranging from 20 and 60 nm. Through careful control of the reaction conditions, single-phase nanoparticular antimonides were synthesized. The nanophases were investigated by powder X-ray diffraction and (high resolution) electron microscopy. The approach is based on activated metal nanoparticles as precursors for the synthesis of the intermetallic compounds. X-ray powder diffraction studies of reaction intermediates allowed monitoring of the reaction kinetics. The small particle size of the reactants ensures short diffusion paths, low activation barriers, and low reaction temperatures, thereby eliminating solid-solid diffusion as the rate-limiting step in conventional bulk-scale solid-state synthesis.     

Synthesis of cross linked platinum metal containing polyyne polymers

Reaction of Pt(PⁿBu₃)₂Cl₂ (1) or Pt(AsⁿBu₃₂Cl₂ (2) with stoichiometric amounts of 1,3,5-triethynylbenzene, [1,3,5-(H? C?C? )₃C₆H₃] (3)yields monomeric, [1,3,5-Cl(PⁿBu₃)₂(Pt? C? C? )₃C₆H₃] (4), [1,3,5-(C1)(AsⁿBu₃)₂Pt? C? C? ₃C₆H₃] (5) or polymeric, {1,3,5-[(PⁿBu₃)₂Pt? C?C? ]₃C₆H₃? )ⁿ (6), {1,3,5-[(AsⁿBu₃)₂Pt? C? C? ]₃C₆H₃? }ⁿ (7) complexes. Treatment of (1) with (3) and 2,5-diethynyl-p-xylene,H? C? C? C₆H₂(CH₃)₂? C? C? H (8) in varying molar ratios yields a series of high molecular weight cross linked platinum metal containing polyyne copolymers.     

Chemoenzymatic synthesis of neuraminic acid containing C-glycoside polymers

[structure: see text] Two neuraminic acid-based, C-glycoside polymers were synthesized. Preliminary studies on one of these polymers showed potent neuraminidase inhibitory activity, suggesting potential utility as an antipathogenic surface coating for the preparation of antimicrobial biomaterials.     

Chemoenzymatic synthesis of biodegradable polymers containing glucobiose branches

Polymerizable sugar esters including glucobiose were synthesized from maltose or trehalose and divinyl adipate using enzyme in DMF. ¹³C NMR data showed that 6'-position of maltose and mono-6-position of trehalose were esterified. Further, these glucobiose esters was polymerized with azo-initiator to give the corresponding polymers.     

A novel synthesis of acrylic acid containing polymers

A novel synthesis of linear acrylic acid containing polymers, poly(styrene-co-acrylic acid) and poly(acrylic acid), was accomplished through hydrolysis of the respective parent polymers, i.e. poly(styrene-co-methyl acrylate) and poly(methyl acrylate), with trimethylsilyl iodide under mild conditions. Combination of ¹H NMR, ¹³C NMR, FTIR, DSC and chemical titration confirms that the conversion from methoxycarbonyl to carboxyl is almost complete. This method is further successfully applied to synthesize poly-(ethyl methacrylate-co-acrylic acid) through selective hydrolysis of the methyl acrylate units in poly(ethyl methacrylate-co-methyl acrylate).     

Synthetic functionalized terpolymeric resin for the removal of hazardous metal ions: synthesis,characterization and batch separation analysis

An effectual functionalized synthetic resin involving anthranilic acid/4‐nitroaniline/formaldehyde was synthesized for the detoxification of hazardous metal ions. The resin was characterized by Fourier transform infrared, ¹H, and ¹³C nuclear magnetic resonance spectroscopy, and its morphology was established through scanning electron microscope and X‐ray diffraction. The resin was analyzed by thermogravimetric analysis to assess the thermal stability, in which the resin could be used in high temperature aqueous solutions for the elimination of harmful metal ions. The ion‐exchange property of the resin was evaluated by batch technique for specific metal ions viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. The study was extended to three variations such as effect of metal ion uptake in the presence of various electrolytes in different concentrations, effect of pH, and effect of contact time. The outcome proved that the resin can be used as a strong cation‐exchanger to remove various metal ions from the solutions. The resin could be regenerated and reused with quantitative recovery of metal ions for few cycles. On comparison with the earlier reported resins, the synthesized resin has found excellent capability of metal ion recovery. The resin possesses an utmost ion‐exchange capacity, which is in good harmony with isotherm models and kinetics. Copyright © 2015 John Wiley & Sons, Ltd.