Ab initioMO calculations for the oxides,oxyacids, and oxyanions of S(IV) and S(VI)

Ab initio molecular orbital (MO ) calculations for two series of sulfur–oxygen compounds are reported: the S(IV ) system of SO₂, H₂SO₃, HSO, and SO, and the S(VI ) system of SO₃, H₂SO₄, HSO, and SO. Geometries about the sulfur atoms were optimized using the STO -3G* basis set; energies at these geometries were computed by the STO ?3G and 44-31G basis sets both with and without five Gaussian d orbitals on S. The sulfur–oxygen bond lengths and the angles about the central atoms agree fairly well with experiment. The stabilization energy associated with the addition of the d orbitals was found to be a constant amount per bond (ca. 54 and 28 kcal mole^?1 in the minimal and extended bases, respectively) in hypervalent compounds. The isomer HSO was predicted to be more stable than SO₂(OH)^?, but the reverse was true for HSO₂(OH) compared to SO(OH)₂. The deprotonation energies for the acids and the hydration energies for the oxides also were computed and discussed with reference to experimental data.     

Study of the structural,electronic, and magnetic properties of the barium-rich iron(IV) oxides,Ba(2)FeO(4) and Ba(3)FeO(5)

Crystals of Ba(2)FeO(4) and Ba(3)FeO(5), grown from a "self-sealing" KOH-Ba(OH)(2) flux, have been characterized by single-crystal X-ray diffraction, M?ssbauer spectroscopy, and magnetic measurements. Ba(2)FeO(4) forms nonmerohedral twinned crystals with the monoclinic space group P2(1)/n, a = 6.034(2) A, b = 7.647(2) A, c = 10.162(3) A, beta = 92.931(6) degrees, and Z = 4. Ba(3)FeO(5) crystallizes in the orthorhombic space group Pnma, with a = 10.301(1) A, b = 8.151(1) A, c = 7.611(1) A, and Z = 4. While both compounds feature discrete FeO(4)(4-) tetrahedra, the anion found in Ba(2)FeO(4) has shorter Fe-O bonds and is significantly distorted relative to the Ba(3)FeO(5) anion. An iron valence of 4+ was confirmed by magnet susceptibility measurements and by the low-temperature isomer shifts of -0.152 and -0.142 mm/s relative to alpha-iron for Ba(2)FeO(4) and Ba(3)FeO(5), respectively.     

Well-defined,air-stable (NHC)Pd(Allyl)Cl (NHC = N-heterocyclic carbene) catalysts for the arylation of ketones

A number of palladium-N-heterocyclic carbene (NHC) complexes were found to be active catalysts for the arylation of ketones. A large number of substrates, both aryl halides and ketones, are compatible with the reaction conditions. The ketone arylation reactions are achieved with low catalyst loading in short reaction times using aryl chlorides and triflates as reactive partners. [reaction: see text]     

Lanthanide-3d cyanometalate chains Ln(III)-M(III) (Ln=Pr, Nd, Sm, Eu, Gd, Tb; M=Fe) with the tridentate ligand 2,4,6-tri(2-pyridyl)-1,3,5-triazine (tptz): evidence of ferromagnetic interactions for the Sm(III)-M(III) compounds (M=Fe, Cr)

A series of cyanide-bridged chain mixed Fe(III)/Ln(III) (Ln=Pr, Nd, Sm, Eu, Gd, Tb) complexes with the tridentate ligand 2,4,6-tri(2-pyridyl)-1,3,5-triazine (tptz) used as a capping group has been prepared. Reactions of tptz and LnCl3 with K3Fe(CN)6 yield a family of air-stable 1-D compounds {[Pr(tptz)(H2O)4Fe(CN)6].8H2O}infinity, {[Nd(tptz)(H2O)4Fe(CN)6].8H2O}infinity, {[Sm(tptz)(H2O)4Fe(CN)6].8H2O}, {[Eu(tptz)(H2O)4Fe(CN)6].6H2O}infinity, {[Gd(tptz)(H2O)4Fe(CN)6].6H2O}infinity, and {[Tb(tptz)(H2O)4Fe(CN)6].8H2O}infinity. Temperature dependent magnetic susceptibility studies of reveal that in , the Sm(III) and Fe(III) ions are ferromagnetically coupled with 3-D ordering occurring below 3.5 K. The appearance of the frequency dependent out-of-phase signal is explained in terms of an ordering with a spin glass-like behavior. To compare the magnetic behavior of with related compounds, {[Sm(tptz)(H2O)4Co(CN)6].8H2O}infinity and {[La(tptz)(DMF)(H2O)3Fe(CN)6].5H2O}infinity, {[Sm(tmphen)(DMF)3(H2O)Fe(CN)6].2H2O}infinity, {[Sm(tmphen)2(H2O)2Fe(CN)6].MeOH.13H2O}infinity and {[Sm(tmphen)2(H2O)2Cr(CN)6].MeOH.9H2O}infinity with 3,4,7,8-tetramethyl-1,10-phenanthroline (tmphen) were also prepared.     

Theoretical study of the structure and stability of dimers (LiBO)2, (LiAlO)2, (LiBS)2, and (LiAlS)2

Institute of New Chemical Problems, Russian Academy of Sciences, Chernogolovka. Translated from Zhurnal Strukturnoi Khimii, Vol. 33, No. 1, pp. 10–17, January–February, 1992.     

Hexamminecobalt(III) tricarbonatocobaltate(III) as a redox titrant for the determination of iodide,sulfide, sulfite,and thiosulfate

Summary Hexamminecobalt(III) tricarbonatocobaltate(III) has been used for the determination of iodide. The effect of chloride and bromide, individually and collectively, have also been studied.The determination of sulfide, sulfite and thiosulfate, respectively, with Co(NH₃)₆Co(CO₃)₃ as volumetric oxidimetric titrant has been demonstrated. The respective quantities determined are from 5.84 mg to 195.00g with a maximum standard deviation of 0.91 %, from 24.85 mg to 249.00g with a maximum standard deviation of 0.39 %, and from 12.60 mg to 126.00g with a maximum standard deviation of 0.64%.

---

Zusammenfassung Hexaminkobalt(III)tricarbonatokobaltat(III) (A) wurde zur Jodidbestimmung verwendet. Dabei wurde die Wirkung von anwesendem Chlorid und Bromid — einzeln und gemeinsam — untersucht. Die Bestimmung von Sulfid, Sulfit und Thiosulfat mit A als volumetrisches Oxydationsmittel wurde beschrieben. Die bestimmbaren Mengen liegen zwischen 5,84 mg und 195,0g mit einer maximalen Standardabweichung von 0,91 %, zwischen 24,85 mg und 249,0g mit einer maximalen Standardabweichung von 0,39% bzw. zwischen 12,60 mg und 126,0g mit einer maximalen Standardabweichung von 0,64%.

     

Bis(dimethylmetall(III)glyoximato)metallate(II) (metall(III) = Al,Ga, In,metall(II) = Ni,Pd, Pt,Cu)

When the trimethyl derivatives of aluminium, gallium and indium react with glyoximato metallates, (R₂C₂N₂(O)OH)₂Met^II (R = H, CH₃; Met^II = Ni, Pd, Pt, Cu), in a $\text{2}\text{1}$ molar ratio, 2 mol of methane are evolved and monomeric bis(dimethylmetal(III)glyoximato)metallates(II) (metal(III) = Al, Ga, In) are formed in high yields. The vibrational and NMR spectra of the new complexes were measured and were partly resolved. The X-ray structure determinations of two of these compounds show non-planar structures of approximate C_2h and C₂ symmetry, respectively, with weak metal(III)?metal(II) π-interactions.     

A novel method for the construction of (z,e)- or (z,z)-conjugated alkadienyl carboxylates

[reaction: see text] The stereocontrolled dehydrobromination of 1,2-dibromoethyl carboxylates giving (Z)-2-bromovinyl carboxylates could readily be approached by using DBU and a catalytic amount of hydroquinone as a base at -78 degrees C. The first investigation on the Suzuki-type cross-coupling of (Z)-2-bromovinyl carboxylates as electrophiles with stereodefined alkenylboronic acids provides a novel method for the construction of (Z,E)- or (Z,Z)-conjugated alkadienyl carboxylate moieties, which are often present in a range of natural products.     

A stereodivergent strategy for the preparation of corynantheine and ipecac alkaloids, their epimers, and analogues: efficient total synthesis of (-)-dihydrocorynantheol, (-)-corynantheol, (-)-protoemetinol, (-)-corynantheal, (-)-protoemetine, and related natural and nonnatural compounds

Here we present a general and common catalytic asymmetric strategy for the total and formal synthesis of a broad number of optically active natural products from the corynantheine and ipecac alkaloid families, for example, indolo[2,3-a]- and benzo[a]quinolizidines. Construction of the core alkaloid skeletons with the correct absolute and relative stereochemistry relies on an enantioselective and diastereodivergent one-pot cascade sequence followed by an additional diastereodivergent reaction step. This allows for enantio- and diastereoselective synthesis of three out of four possible epimers of the quinolizidine alkaloids that begin from common and easily accessible starting materials by using a common synthetic route. Focus has been made on excluding protecting groups and limiting isolation and purification of synthetic intermediates. This methodology is applied in the total synthesis of the natural products (-)-dihydrocorynantheol, (-)-hirsutinol, (-)-corynantheol, (-)-protometinol, (-)-dihydrocorynantheal, (-)-corynantheal, (-)-protoemetine, (-)-(15S)-hydroxydihydrocorynantheol, and an array of their nonnatural epimers. The potential of this strategy is also demonstrated in the synthesis of biologically interesting natural product analogues not accessible through synthetic elaboration of alkaloid precursors available from nature, for example, thieno[3,2-a]quinolizidine derivatives. We also report the formal synthesis of (+)-dihydrocorynantheine, (-)-emetine, (-)-cephaeline, (-)-tubulosine, and (-)-deoxytubulosine.     

Synthesis of (R)-, (S)-, and (RS)-hydroxymethylmexiletine,one of the major metabolites of mexiletine

Hydroxymethylmexiletine (HMM), one of the main metabolites of mexiletine, has been synthesized in both racemic and optically active forms following two alternative routes. The ee values for both HMM enantiomers were 98%, as assessed by ¹H NMR analysis in the presence of (−)-(R)-(2-naphthyloxy)phenylacetic acid as a chiral solvating agent and electrophoretic analysis using β-cyclodextrine sulfated sodium salt as a chiral auxiliary.     

Sol-Gel Microsphere Pelletisation Process for Fabrication of (U,Pu)O2, (U,Pu)C and (U,Pu)N Fuel Pellets for the Prototype Fast Breeder Reactor in India

A “dust-free” sol-gel microsphere pelletisation (SGMP) process has been developed for fabrication of (U,Pu)O₂, (U,Pu)C and (U,Pu)N fuel pellets containing around 15% plutonium for the forthcoming prototype fast breeder reactor (PFBR) in India. The objective was to produce homogeneous sintered pellets of ∼85% T.D. with a predominantly open-pore structure. Hydrated gel-microspheres of UO₃+PuO₂ and UO₃+PuO₂+C have been prepared from nitrate solutions of uranium and plutonium by the “ammonia internal gelation” process, using hexamethylene tetramine (HMTA) as an ammonia generator and silicone oil at 90±1°C as gelation bath. For oxide fuel pellets, the hydrated UO₃+PuO₂ gel-microspheres were calcined at around 700°C in Ar+8% H₂ atmosphere to produce “non-porous”, “free-flowing” and coarse (around 400 micron) microspheres which could be directly pelletised at 550 MPa to green pellets. The mixed oxide pellets were subjected either to low temperature (∼1100°C) oxidative sintering (LTS) in N₂+air containing ∼1500 ppm O₂ or to high temperature (1650°C) sintering, (HTS) in Ar+8% H₂. For monocarbide and mononitride pellets, hydrated gel-microspheres of UO₃+PuO₂+C were subjected to carbothermic synthesis in vacuum (∼1 Pa) and flowing nitrogen (flow rate: 1.2 m³/h) in the temperature range of 1450–1550°C respectively. The monocarbide and mononitride microspheres thus produced were relatively hard and required higher compaction pressure (∼1200 MPa) for making reen pellets which could be sintered to 85% T.D. in Ar+8% H₂ at 1700°C. The sintered oxide, monocarbide and mononitride pellets had a “blackberry” “open” pore microstructure with fine grain size. The microspheres retained their individual identity in the sintered pellets because during sintering densification took place mainly within and not between the microspheres.     

Photoreaction pathways for the anticancer complex trans,trans,trans-[Pt(N3)2(OH)2(NH3)2

The photodecomposition of the anticancer complex trans,trans,trans-[Pt(N(3))(2)(OH)(2)(NH(3))(2)] in acidic aqueous solution, as well as in phosphate-buffered saline (PBS), induced by UVA light (centred at λ = 365 nm) has been studied by multinuclear NMR spectroscopy. We show that the photoreaction pathway in PBS, which involves azide release, differs from that in acidic aqueous conditions, under which N(2) is a major product. In both cases, a number of trans-{N-Pt(II/IV)-NH(3)} species were also observed as photoproducts, as well as the evolution of O(2) and release of free ammonia with a subsequent increase in pH. The results from this study illustrate that photoinduced reactions of Pt(IV)-diazido derivatives can lead to novel reaction pathways, and therefore potentially to new cytotoxic mechanisms in cancer cells.     

Total syntheses of the tylophora alkaloids cryptopleurine, (-)-antofine, (-)-tylophorine, and (-)-ficuseptine C

A concise, efficient and modular approach to the tylophora alkaloids is described, a family of potent cytotoxic agents that are equally effective against drug sensitive and multidrug resistant cancer cell lines. The advantages of the chosen route are illustrated by the total syntheses of the phenanthroquinolizidine cryptopleurine (1) and the phenanthroindolizidines (-)-antofine (2), (-)-tylophorine (3), and their only recently isolated congener (-)-ficuseptine C (4). The key steps consist in a Suzuki cross-coupling between a (commercial) boronic acid and a simple aryl-1,2-dihalide followed by elaboration of the resulting products into the corresponding 2-alkynyl-biphenyl derivatives 27, 33, 41 and 46. The latter undergo PtCl2-catalyzed cycloisomerizations with formation of the functionalized phenanthrenes 28, 34, 42 and 47, which were transformed into the targeted alkaloids by a deprotection/Pictet-Spengler annulation tandem. Due to the flexibility and robust character of this approach, it might enable a systematic exploration of the pharmacological profile of this promising class of bioactive natural products.     

Synthesis of the ladybug defensive agents (±)-hippodamine, (±)-convergine, (±)-hippocasine and (±)-hippocasine oxide

The total syntheses of the ladybug defensive agents (±)-hippodamine, (±)-convergine, (±)-hippocasine, and (±)-hippocasine oxide are described starting from perhydroboraphenalene.     

Activation cross-sections for some (n, 2n), (n,p) and (n, γ)-reactions

The average fission neutron cross-sections of the reactions²³³U(n, 2n)²³²U,⁶⁰Ni(n, p)⁶⁰Co and²⁷Al(n, p)²⁷Mg and the resonance integrals of the (n, γ)-reactions of the nuclides¹⁸¹Ta,¹⁷⁶Lu,¹⁷⁵Lu,⁶⁴Ni,⁵⁹Co and²⁶Mg have been determined by the activation method following the well-known conventions. The results verify some of the existing values and present data for hitherto unknown or poorly known reactions.     

Synthesis of (-)-matairesinol, (-)-enterolactone,and (-)-enterodiol from the natural lignan hydroxymatairesinol

[reaction: see text] We describe here a four-step semisynthetic method for the preparation of enantiomerically pure (-)-enterolactone starting from the readily available lignan hydroxymatairesinol from Norway spruce (Picea abies). Hydroxymatairesinol was first hydrogenated to matairesinol. Matairesinol was esterified to afford the matairesinyl 4,4'-bistriflate, which was deoxygenated by palladium-catalyzed reduction to 3,3'-dimethylenterolactone. Demethylation of 3,3'-dimethylenterolactone and reduction with LiAlH(4) yielded (-)-enterolactone and (-)-enterodiol, respectively.     

HMBC-RELAY: a combined technique for the differentiation of simultaneously detected 2J(C,H) and (n)J(C,H) connectivities

We present a new pulse sequence that detects simultaneously (n)J(C,H) and 2J(C,H) connectivities. The corresponding coherences are created along independent pathways and therefore can be separated into two different subspectra. One spectrum is to show all (n)J(C,H) connectivities and the other is to show exclusively 2J(C,H) connectivities. In contrast to the previously published 2J/(n)J experiment, this sequence detects the 2J(C,H) connectivities via a C,H,H-RELAY pathway leading to an intensification of the 2J(C,H) signals. Strictly, the 2J(C,H) spectrum does not show 2J(C,H) but 3J(H,H) coupling interactions within 13CH(k)-12CH(l) fragments. Therefore, 2J(C,H) signals can appear even if the corresponding 2J(C,H) coupling constant is zero.     

Rate coefficients for the reaction of OH with (E)-2-pentenal, (E)-2-hexenal, and (E)-2-heptenal

Rate coefficients for the gas-phase reaction of the OH radical with (E)-2-pentenal (CH(3)CH(2)CH[double bond]CHCHO), (E)-2-hexenal (CH(3)(CH(2))(2)CH[double bond]CHCHO), and (E)-2-heptenal (CH(3)(CH(2))(3)CH[double bond]CHCHO), a series of unsaturated aldehydes, over the temperature range 244-374 K at pressures between 23 and 150 Torr (He, N(2)) are reported. Rate coefficients were measured under pseudo-first-order conditions in OH with OH radicals produced via pulsed laser photolysis of HNO(3) or H(2)O(2) at 248 nm and detected by pulsed laser-induced fluorescence. The rate coefficients were independent of pressure and the room temperature rate coefficients and Arrhenius expressions obtained are (cm(3) molecule(-1) s(-1) units): k(1)(297 K)=(4.3 +/- 0.6)x 10(-11), k(1)(T)=(7.9 +/- 1.2)x 10(-12) exp[(510 +/- 20)/T]; k(2)(297 K)=(4.4 +/- 0.5)x 10(-11), k(2)(T)=(7.5 +/- 1.1)x 10(-12) exp[(520 +/- 30)/T]; and k(3)(297 K)=(4.4 +/- 0.7)x 10(-11), k(3)(T)=(9.7 +/- 1.5)x 10(-12) exp[(450 +/- 20)/T] for (E)-2-pentenal, (E)-2-hexenal and (E)-2-heptenal, respectively. The quoted uncertainties are 2sigma(95% confidence level) and include estimated systematic errors. Rate coefficients are compared with previously published room temperature values and the discrepancies are discussed. The atmospheric degradation of unsaturated aldehydes is also discussed.