Structure and magnetic properties of a new dinuclear nickel(II) complex with a dinucleating hexaazamacrocycle

The crystal structure and magnetic properties of a new dinuclear nickel(II) complex [LNi2(AcO)4]·14H2O, where L = 3,6,9,17,20,23-hexaazatricyclo [23.3.1.111,13] triaconta-1(29),11(30),12,14,25(26),27-hexene, has been studied. X-ray structure analysis shows that the compound consists of a discrete [LNi2(AcO)4] complex and 14 lattice water molecules. Each Ni atom is six coordinated by three N atoms from the macrocycle and three O atoms from the two coordinated acetates; two nickel atoms in each macrocycle are at the distance of 7.028Å. The result of the magnetic measurement indicates that the zero-field splitting constant of nickel(II) centres |D| = 1.87 cm–1.     

Thermodynamic properties of solid solutions of superionic copper,silver, and lithium chalcogenides

Temperature behavior of EMF for a Me/Me⁺-solid electrolyte/sample/Pt electrochemical cell is analyzed for solid solutions of copper and silver chalcogenides. Entropies and enthalpies of metal atoms are determined. The behavior of thermodynamic parameters under variation of the chemical composition of samples and temperature is discussed.     

Syntheses, structures, and magnetic properties of three one-dimensional end-to-end azide/cyanate-bridged copper(II) compounds exhibiting ferromagnetic interaction: new type of solid state isomerism

The work in this paper presents the syntheses, structures, and magnetic properties of three end-to-end (EE) azide/cyanate-bridged copper(II) compounds [Cu(II)L(1)(μ(1,3)-NCO)](n)·2nH(2)O (1), [Cu(II)L(1)(μ(1,3)-N(3))](n)·2nH(2)O (2), and [Cu(II)L(2)(μ(1,3)-N(3))](n) (3), where the ligands used to achieve these species, HL(1) and HL(2), are the tridentate Schiff base ligands obtained from [1 + 1] condensations of salicylaldehyde with 4-(2-aminoethyl)-morpholine and 3-methoxy salicylaldehyde with 1-(2-aminoethyl)-piperidine, respectively. Compounds 1 and 2 crystallize in the monoclinic P2(1)/c space group, while compound 3 crystallizes in the orthorhombic Pbca space group. The metal center in 1-3 is in all cases pentacoordinated. Three coordination positions of the metal center in 1, 2, or 3 are satisfied by the phenoxo oxygen atom, imine nitrogen atom, and morpholine (for 1 and 2) or piperidine (for 3) nitrogen atom of one deprotonated ligand, [L(1)](-) or [L(2)](-). The remaining two coordination positions are satisfied by two nitrogen atoms of two end-to-end bridging azide ligands for 2 and 3 and one nitrogen atom and one oxygen atom of two end-to-end bridging cyanate ligands for 1. The coordination geometry of the metal ion is distorted square pyramidal in which one EE azide/cyanate occupies the apical position. Variable-temperature (2-300 K) magnetic susceptibilities of 1-3 have been measured under magnetic fields of 0.05 (from 2 to 30 K) and 1.0 T (from 30 to 300 K). The simulation reveals a ferromagnetic interaction in all three compounds with J values of +0.19 ± 0.01, +0.79 ± 0.01, and +1.25 ± 0.007 cm(-1) for 1, 2, and 3, respectively. Compound 1 is the sole example of a ferromagnetically coupled EE cyanate-bridged 1-D copper(II) system. In addition, a rare example of supramolecular isomerism and a nice example of magnetic isomerism have been observed and most interestingly a new type of solid state isomerism has emerged as a result of the comparison of the structure and magnetic properties of 2 with a previously published compound (2A) having the same composition and even the same crystal system and space group (New J. Chem.2001, 25, 1203-1207).     

Synthesis and magnetic properties of one-dimensional zinc nickel oxide solid solution

A novel facile method has been demonstrated for large-scale synthesis of zinc-oxide-based one-dimensional solid solution with a series percentage of nickel dopant. The obtained Zn1-xNixO nanorods were characterized by X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and energy dispersed X-ray spectroscopy. The result shows that the obtained Zn1-xNixO nanorods are single crystalline with the Ni2+ dopants occupying tetrahedral Zn2+ cation sites of wurtzite ZnO. Moreover, the Zn1-xNixO nanorods exhibit robust high-Curie-temperature (TC) ferromagnetism at 300 K.     

Structure, magnetic, and electric properties of bismuth niobates doped with d elements: II. State of nickel atoms in solid solutions of low-and high-temperature bismuth orthoniobate

The magnetic susceptibility of nickel-doped solid solutions of bismuth orthoniobate of the low-and high-temperature modifications was studied. Parameters of exchange interactions in dimeric clusters of nickel atoms and also the distribution of monomers and dimers in the solid solutions were calculated. The nickel-containing solid solutions of low-and high-temperature bismuth orthoniobate are similar in magnetic behavior.     

Structure and antiferromagnetism of nickel oxide-copper oxide and nickel oxide-zinc oxide solid solutions. Influence on reactivity

The antiferromagnetism of NiOZnO solid solutions is not always correlated to a rhombohedral distortion of the cubic cell. This confirms the previous results on the NiOCuO system. An anomaly in the reducibility by hydrogen is found in a narrow range of temperature near the Ne´el point of these solids, even though the disappearance of the antiferromagnetism does not result in any detectable structural transformation.     

The thermodynamic properties of solid solutions of manganese and iron in silicon

The thermodynamic properties of solid solutions of manganese and iron in silicon were estimated using the model of two sublattices. The possibility of using the values obtained in thermodynamic calculations was demonstrated.     

Structure and properties of bivalent nickel and copper complexes with pyrazine-amide-thioether coordination: stabilization of trivalent nickel

Acyclic pyrazine-2-carboxamide and thioether containing hexadentate ligand 1,4-bis[o-(pyrazine-2-carboxamidophenyl)]-1,4-dithiobutane (H(2)bpzctb), in its deprotonated form, has afforded light brown [Ni(II)(bpzctb)](1)(S=1) and green [Cu(II)(bpzctb)](2)(S=1/2) complexes. The crystal structures of 1.CH(3)OH and 2.CH(2)Cl(2) revealed that in these complexes the ligand coordinates in a hexadentate mode, affording examples of distorted octahedral M(II)N(2)(pyrazine)N'(2)(amide)S(2)(thioether) coordination. Each complex exhibits in CH(2)Cl(2) a reversible to quasireversible cyclic voltammetric response, corresponding to the Ni(III)/Ni(II)(1) and Cu(II)/Cu(I)(2) redox process. The E(1/2) values reveal that the complexes of bpzctb(2-) are uniformly more anodic by approximately 0.2 V than those of the corresponding complexes with the analogous pyridine ligand, 1,4-bis[o-(pyridine-2-carboxamidophenyl)]-1,4-dithiobutane (H(2)bpctb), attesting that compared to pyridine, pyrazine is a better stabilizer of the Ni(ii) or Cu(i) state. Coulometric oxidation of the previously reported complex [Ni(II)(bpctb)] and 1 generates [Ni(III)(bpctb)](+) and [Ni(III)(bpzctb)](+) species, which exhibit a LMCT transition in the 470--480 nm region and axial EPR spectra corresponding to a tetragonally elongated octahedral geometry. Complex 2 exhibits EPR spectra characteristic of the d(z(2)) ground state.     

Mechanism of carbothermal reduction of iron, cobalt, nickel and copper oxides

A new scheme of thermal dissociation which is based on the dissociative evaporation of the reactant with simultaneous condensation of the low-volatile product has been invoked to interpret the kinetics of reduction of FeO, CoO, NiO and Cu₂O by carbon. A critical analysis of literature data and their comparison with theoretical calculations has shown that the main kinetic characteristics of carbothermal reduction, including the initial decomposition temperature and activation energy are in full agreement with the proposed mechanism of decomposition. Condensation of the low-volatile product (metal vapour) in the reaction zone and partial transport of condensation energy to the oxide account for the features which are typical of solid state reactions and manifest themselves in the appearance of periods of induction and acceleration in the course of the process. Carbon fulfils the role of buffer in this process. This is supported by an appearance of metals in the condensed phase and a higher than equilibrium partial pressure of oxygen in high-vacuum experiments with Knudsen cells.     

Synthesis, crystal structures, and magnetic properties of a new nickel(II) complex with nitronyl nitroxide

A new nickel(II) complex [Ni(NIT-1′-MeBzIm)₂(H₂O)₂] · ClO₄ · H₂O (NIT-1′-MeBzIm = 2-{2′-[(l′-methyl)benzimidazolyl]}-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide) has been prepared and structurally characterized by single-crystal X-ray diffraction. Complex I crystallizes in monoclinic, space group C2/c, Z = 4. Crystal data: C₃₀H₄₆N₈O₁₆ClNi, Mr = 869.06, a = 13.958(3), b = 15.904(4), c = 18.514(5) Å, β = 101.047(3)°. The X-ray analysis reveals that Ni²⁺ ion resides in a distorted octahedron center, the complex was linked by intermolecular hydrogen bonds, resulting in a 2D network configuration. Magnetic investigation indicates the existence of interamolecular interactions is antiferromagnetic with J = ?40.76 cm^?1.     

Femtosecond transient absorption, Raman, and electrochemistry studies of tetrasulfonated copper phthalocyanine in water solutions

Ultrafast time-resolved electronic spectra of the primary events induced in the copper tetrasulfonated phthalocyanine Cu(tsPc)4-) in aqueous solution has been measured by femtosecond pump-probe transient absorption spectroscopy. The primary events initiated by the absorption of a photon occurring within the femtosecond time scale are discussed on the basis of the electron transfer mechanism between the adjacent phthalocyanine rings proposed recently in our laboratory. The femtosecond transient absorption results are compared with the low temperature emission spectra obtained with Raman spectroscopy and the voltammetric curves.     

Investigation of structure, stability, phase composition and magnetic ordering in ultrathin iron/nickel films

By thermal and chemical treatment of Langmuir-Blodgett (LB) films, oxidic and metallic Fe and Ni layers can be prepared. The films are characterised, where differences e.g. in the lateral homogeneity are found. The metallic Fe containing samples show a higher corrosion stability as compared with films prepared by other coating techniques. Mixed Fe/Ni oxidic and metallic layers, respectively, are prepared, where the Ni concentration in the oxidic films can be determined as a function of the ratio of initially transferred numbers of LB layers. The phase composition of the metallic Fe changes systematically with the Ni concentration.In partial fulfilment of his thesis     

Synthesis, electrochemistry, thin-layer UV-vis and fluorescence spectroelectrochemistry of a new salicylaldimine ligand and its copper complex

The new asymmetric, fluorescent Schiff-base ligand, N-(pyrene)-salicylaldimine (L), and its copper complex having an ONNO donor set, [Cu(L) ₂ ], were synthesized and characterized using elemental analysis, IR, UV-vis, ¹H and ¹³C-NMR spectroscopies. Their electrochemical and spectroelectrochemical behaviors were investigated in a detail by using cyclic voltammetry (CV), square wave voltammetry (SWV), in-situ UV-vis, and fluorescence spectroelectrochemistry. The formation of the complex was monitored by the in-situ fluorescence technique based on the quenching of the fluorescence-probe ligand. Electrochemical studies showed that L exhibits a single irreversible reduction process. However, the SWV indicated that this process was not totally irreversible in the time scale of the measurement. The cathodic peak potential of the reduction process occurred at E _pc = −1.35 V vs Ag/AgCl (scan rate: 0.025 Vs⁻¹). On the other hand, [Cu(L) ₂ ] showed one quasi-reversible one-electron reduction process in the scan rates of 0.025–0.50 Vs⁻¹, which was assigned to metal-based one-electron process; [Cu(2+)(L)₂] + e⁻ → [Cu(+)(L)₂]⁻. The value of half-wave potential (E _1/2) of the reduction process was −0.54 V vs Ag/AgCl (scan rate: 0.025 Vs⁻¹). The time-resolved spectra showed, when the potential (E _app = −1.60 V) was applied in a thin-layer cell, that the main and shoulder bands of (L) at 385, 336, and 407 nm almost disappeared and a new band at 443 nm with a shoulder formed during the reduction process. No change was observed on the final spectrum of the totally reduced ligand for long period under nitrogen atmosphere, which indicated that the singly reduced species remained stable and was not accompanied by a chemical reaction in the time scale of the spectroelectrochemical measurement. The spectral changes during the reduction process of [Cu(L) ₂ ] confirmed the metal-centered reduction process. The fluorescence intensity of L decreased during the reduction process in the thin-layer cell, as result of the perturbation of the conjugated system of the reduced species.     

Simultaneous extraction of trace amounts of cobalt, nickel and copper ions using magnetic iron oxide nanoparticles without chelating agent

The present study investigates the application of Fe₃O₄ nanoparticles as an adsorbent for solid phase extraction and their subsequent determination of trace amounts of cobalt, nickel and copper from environmental water samples using flame atomic absorption spectrometry. The analyte ions were adsorbed on magnetic nanoparticles in the pH range of 10–12 and then, Fe₃O₄ nanoparticles were easily separated from the aqueous solution by applying an external magnetic field and decantation. Hence, no filtration or centrifugation was needed. After extraction and collection of magnetic nanoparticles, the analyte ions were desorbed using 1.0 M HNO₃. Several factors that may affect the preconcentration and extraction process, including pH, type and volume of eluent, sample volume, salt effect and matrix effect were optimized. Under the optimized conditions, linearity was maintained from 0.005–3.0 μg/mL for cobalt and nickel and 0.001 to 1.25 μg/mL for copper in the initial solution. The detection limits of this method for cobalt, nickel and copper ions were 0.9, 0.7 and 0.3 ng/mL, respectively. Finally, the method was successfully applied to the extraction and determination of the analyte ions in natural waters and reference plant samples.     

The determination of aluminum,nickel, cobalt,copper, and iron in alnico

A method has been developed for the determination of the major constituents of Alnico based on an anion exchange separation of the chloride complexes and the subsequent determination of aluminum, nickel, copper, cobalt and iron with EDTA. The method is more convenient than conventional classical methods.     

Synthesis,crystal structure and magnetic properties of a new macrocyclic binuclear copper(II) complex

A new binuclear copper complex [CuLCl₂]₂, [L = 1-(p-tolylsulfonyl)-1,4,7- triazacyclononane], has been synthesized and structured as well as magnetically characterized. In the complex, each copper(II) atom is located in the center of a distorted square pyramidal configuration of five coordinating atoms (two nitrogen atom and three chlorine atom). Two copper(II) atoms were bridged by two chlorine anions (Cl1 and Cl1a). The distance between two copper(II) atoms is 3.483 Å. An antiferromagnetic exchange coupling effect exists in the complex.     

Catalytic properties of nickel oxide and its solid solutions in magnesium oxide in hydrogen oxidation

Temperature dependence of the reaction rate of H₂ oxidation on nickel oxide and solid solutions of nickel ions in MgO prepared at 573–1373 K, has been studied. The variation of the catalytic properties with temperature is attributed to the presence of nickel ions in different oxidation states simultaneously, i. e. Ni(II) and Ni(III).

---

H₂ MgO, 573–1373 K. — Ni(II) Ni(III).