Peptide hydrolysis catalyzed by matrix metalloproteinase 2: a computational study

The MMP-2 reaction mechanism is investigated by using different computational methodologies. First, quantum mechanical (QM) calculations are carried out on a cluster model of the active site bound to an Ace-Gly approximately Ile-Nme peptide. Along the QM reaction path, a Zn-bound water molecule attacks the Gly carbonyl group to give a tetrahedral intermediate. The breaking of the C-N bond is completed thanks to the Glu 404 residue that shuttles a proton from the water molecule to Ile-N atom. The gas-phase QM energy barrier is quite low ( approximately 14 kcal/mol), thus suggesting that the essential catalytic machinery is included in the cluster model. A similar reaction path occurs in the MMP-2 catalytic domain bound to an octapeptide substrate according to hybrid QM and molecular mechanical (QM/MM) geometry optimizations. However, the rupture of the Gly( P 1) approximately Ile( P 1') amide bond is destabilized in the static QM/MM calculations, owing to the positioning of the Ile( P 1') side chain inside the MMP-2 S 1' pocket and to the inability of simple energy miminization methodologies to properly relax complex systems. Molecular dynamics simulations show that these steric limitations are overcome easily through structural fluctuations. The energetic effect of structural fluctuations is taken into account by combining QM energies with average MM Poisson-Boltzmann free energies, resulting in a total free energy barrier of 14.8 kcal/mol in good agreement with experimental data. The rate-determining event in the MMP-2 mechanism corresponds to a H-bond rearrangement involving the Glu 404 residue and/or the Glu 404-COOH --> N-Ile( P 1') proton transfer. Overall, the present computational results and previous experimental data complement each other well in order to provide a detailed view of the MMPs catalytic mechanism.     

New model for a theoretical density functional theory investigation of the mechanism of the carbonic anhydrase: how does the internal bicarbonate rearrangement occur?

A theoretical density functional theory (DFT, B3LYP) investigation has been carried out on the catalytic cycle of the carbonic anhydrase. A model system including the Glu106 and Thr199 residues and the "deep" water molecule has been used. It has been found that the nucleophilic attack of the zinc-bound OH on the CO(2) molecule has a negligible barrier (only 1.2 kcal mol(-1)). This small value is due to a hydrogen-bond network involving Glu106, Thr199, and the deep water molecule. The two usually proposed mechanisms for the internal bicarbonate rearrangement have been carefully examined. In the presence of the two Glu106 and Thr199 residues, the direct proton transfer (Lipscomb mechanism) is a two-step process, which proceeds via a proton relay network characterized by two activation barriers of 4.4 and 9.0 kcal mol(-1). This pathway can effectively compete with a rotational mechanism (Lindskog mechanism), which has a barrier of 13.2 kcal mol(-1). The fast proton transfer found here is basically due to the effect of the Glu106 residue, which stabilizes an intermediate situation where the Glu106 fragment is protonated. In the absence of Glu106, the barrier for the proton transfer is much larger (32.3 kcal mol(-1)) and the Lindskog mechanism becomes favored.     

DFT study of the mechanisms of in water Au(I)-catalyzed tandem [3,3]-rearrangement/Nazarov reaction/[1,2]-hydrogen shift of enynyl acetates: a proton-transport catalysis strategy in the water-catalyzed [1,2]-hydrogen shift

A computational study with the Becke3LYP density functional was carried out to elucidate the mechanisms of Au(I)-catalyzed reactions of enynyl acetates involving tandem [3,3]-rearrangement, Nazarov reaction, and [1,2]-hydrogen shift. Calculations indicate that the [3,3]-rearrangement is a two-step process with activation free energies below 10 kcal/mol for both steps. The following Nazarov-type 4pi electrocyclic ring-closure reaction of a Au-containing dienyl cation is also easy with an activation free energy of 3.2 kcal/mol in CH2Cl2. The final step in the catalytic cycle is a [1,2]-hydride shift, and this step is the rate-limiting step (with a computed activation free energy of 20.2 kcal/mol) when dry CH2Cl2 is used as the solvent. When this tandem reaction was conducted in wet CH2Cl2, the [1,2]-hydride shift step in dry solution turned to a very efficient water-catalyzed [1,2]-hydrogen shift mechanism with an activation free energy of 16.4 kcal/mol. Because of this, the tandem reaction of enynyl acetates was found to be faster in wet CH2Cl2 as compared to the reaction in dry CH2Cl2. Calculations show that a water-catalyzed [1,2]-hydrogen shift adopts a proton-transport catalysis strategy, in which the acetoxy group in the substrate is critical because it acts as either a proton acceptor when one water molecule is involved in catalysis or a proton-relay stabilizer when a water cluster is involved in catalysis. Water is found to act as a proton shuttle in the proton-transport catalysis strategy. Theoretical discovery of the role of the acetoxy group in the water-catalyzed [1,2]-hydrogen shift process suggests that a transition metal-catalyzed reaction involving a similar hydrogen shift step can be accelerated in water or on water with only a marginal effect, unless a proton-accepting group such as an acetoxy group, which can form a hydrogen bond network with water, is present around this reaction's active site.     

Computational mutation analysis of hydrogen abstraction and radical rearrangement steps in the catalysis of coenzyme B12-dependent diol dehydratase

A mutation analysis of the catalytic functions of active-site residues of coenzyme B(12)-dependent diol dehydratase in the conversion of 1,2-propanediol to 1,1-propanediol has been carried out by using QM/MM computations. Mutants His143Ala, Glu170Gln, Glu170Ala, and Glu170Ala/Glu221Ala were considered to estimate the impact of the mutations of His143 and Glu170. In the His143Ala mutant the activation energy for OH migration increased to 16.4 from 11.5 kcal mol(-1) in the wild-type enzyme. The highest activation energy, 19.6 kcal mol(-1), was measured for hydrogen back-abstraction in this reaction. The transition state for OH migration is not sufficiently stabilized by the hydrogen-bonding interaction formed between the spectator OH group and Gln170 in the Glu170Gln mutant, which demonstrates that a strong proton acceptor is required to promote OH migration. In the Glu170Ala mutant, a new strong hydrogen bond is formed between the spectator OH group and Glu221. A computed activation energy of 13.6 kcal mol(-1) for OH migration in the Glu170Ala mutant is only 2.1 kcal mol(-1) higher than the corresponding barrier in the wild-type enzyme. Despite the low activation barrier, the Glu170Ala mutant is inactive because the subsequent hydrogen back-abstraction is energetically demanding in this mutant. OH migration is not feasible in the Glu170Ala/Glu221Ala mutant because the activation barrier for OH migration is greatly increased by the loss of COO(-) groups near the spectator OH group. This result indicates that the effect of partial deprotonation of the spectator OH group is the most important factor in reducing the activation barrier for OH migration in the conversion of 1,2-propanediol to 1,1-propanediol catalyzed by diol dehydratase.     

Ab initio model study on acetylcholinesterase catalysis: potential energy surfaces of the proton transfer reactions

Ab initio molecular orbital (MO) and hybrid density functional theory (DFT) calculations have been applied to the initial step of the acylation reaction catalyzed by acetylcholinesterase (AChE), which is the nucleophiric addition of Ser200 in catalytic triads to a neurotransmitter acetylcholine (ACh). We focus our attention mainly on the effects of oxyanion hole and Glu327 on the potential energy surfaces (PESs) for the proton transfer reactions in the catalytic triad Ser200-His440-Glu327. The activation barrier for the addition reaction of Ser200 to ACh was calculated to be 23.4 kcal/mol at the B3LYP/6-31G(d)//HF/3-21G(d) level of theory. The barrier height under the existence of oxyanion hole, namely, Ser200-His440-Glu327-ACh-(oxyanion hole) system, decreased significantly to 14.2 kcal/mol, which is in reasonable agreement with recent experimental value (12.0 kcal/mol). Removal of Glu327 from the catalytic triad caused destabilization of both energy of transition state for the reaction and tetrahedral intermediate (product). PESs calculated for the proton transfer reactions showed that the first proton transfer process is the most important in the stabilization of tetrahedral intermediate complex. The mechanism of addition reaction of ACh was discussed on the basis of theoretical results.     

Synergism of catalysis and reaction center rehybridization in nucleophilic additions to cumulenes: the one-, two-, three-water hydrolyses of carbodiimide and methyleneimine

The results of a theoretical study of the one-, two- and three-water hydrolyses of carbodiimide and the one- and two-water hydrolyses of methyleneimine are presented. All structures were optimized and characterized at the MP2(full)/6-31G* level of theory. Energies for the one-water hydrolysis of carbodiimide were determined at numerous higher levels of theory, up to the QCISD(T)(fc)/6-311+G(3df,2p)//MP2(full)/6-31G* level. The Delta E0(Delta G298) activation barriers for the rate-determining steps of the one-, two- and three-water hydrolyses of carbodiimide, respectively, are 44.8 (46.3), 29.3 (32.3) and 22.9 (26.2) kcal mol(-1) at the MP2(full)/6-31G* level. The consideration of a second water molecule catalyzes the hydrolysis by 15.5 kcal mol(-1) on the E0 surface and by 14.0 kcal mol(-1) on the G298 surface with respect to the one-water hydrolysis. Placement of a third water molecule opposite the site of proton transfer catalyzes the reaction by an additional 6.4 kcal mol(-1) on the E0 surface and by 6.1 kcal mol(-1) on the G298 surface. The catalytic effect of the third water molecule results from the synergistic effects of rehybridization and charge relaxation in the transition state. The charge relaxation in the transition state is illustrated through natural population analysis calculations on the pre-coordination complexes and the transition state structures. We also consider the placement of the third water molecule in the proton transfer chain and we show this to be of little catalytic relevance. The activation barriers determined for the one- and two-water hydrolyses of methyleneimine are Delta G298=51.9 and Delta G298=35.5 kcal mol(-1), respectively, and they are larger than for carbodiimide. The results are compared with the hydrolyses of carbon dioxide and formaldehyde.     

Combined QM(DFT)/MM molecular dynamics simulations of the deamination of cytosine by yeast cytosine deaminase (yCD)

Extensive combined quantum mechanical (B3LYP/6‐31G*) and molecular mechanical (QM/MM) molecular dynamics simulations have been performed to elucidate the hydrolytic deamination mechanism of cytosine to uracil catalyzed by the yeast cytosine deaminase (yCD). Though cytosine has no direct binding to the zinc center, it reacts with the water molecule coordinated to zinc, and the adjacent conserved Glu64 serves as a general acid/base to shuttle protons from water to cytosine. The overall reaction consists of several proton‐transfer processes and nucleophilic attacks. A tetrahedral intermediate adduct of cytosine and water binding to zinc is identified and similar to the crystal structure of yCD with the inhibitor 2‐pyrimidinone. The rate‐determining step with the barrier of 18.0 kcal/mol in the whole catalytic cycle occurs in the process of uracil departure where the proton transfer from water to Glu64 and nucleophilic attack of the resulting hydroxide anion to C2 of the uracil ring occurs synchronously. © 2016 Wiley Periodicals, Inc.     

DFT study of the glutathione peroxidase-like activity of phenylselenol incorporating solvent-assisted proton exchange

Modeling of the glutathione peroxidase-like activity of phenylselenol has been accomplished using density-functional theory and solvent-assisted proton exchange (SAPE). SAPE is a modeling technique intended to mimic solvent participation in proton transfer associated with chemical reaction. Within this method, explicit water molecules incorporated into the gas-phase model allow relay of a proton through the water molecules from the site of protonation in the reactant to that in the product. The activation barriers obtained by SAPE for the three steps of the GPx-like mechanism of PhSeH fall within the limits expected for a catalytic system at physiological temperatures (DeltaG(1)++ = 19.1 kcal/mol; DeltaG(2)++= 6.6 kcal/mol; G(3)++ = 21.7 kcal/mol) and are significantly lower than studies which require direct proton transfer. The size of the SAPE network is also considered for the model of the reduction of the selenenic acid, step 2 of the GPx-like cycle. Use of a four-water network better accommodates the reaction pathway and reduces the activation barrier by 5 kcal/mol over the two-water model.     

Computational study on mechanistic details of the aminoethanol rearrangement catalyzed by the vitamin B12-dependent ethanolamine ammonia lyase: His and Asp/Glu acting simultaneously as catalytic auxiliaries

The rearrangement of aminoethanol catalyzed by ethanolamine ammonia lyase is investigated by computational means employing DFT (B3LYP/6-31G) and ab initio molecular orbital theory (QCISD/cc-pVDZ). The study aims at providing a detailed account on various crucial aspects, in particular a distinction between a direct intramolecular migration of the partially protonated NH(2) group vs elimination of NH(4)(+). Three mechanistic scenarios were explored: (i) According to the calculations, irrespective of the nature of the protonating species, intramolecular migration of the NH(3) group is energetically less demanding than elimination of NH(4)(+). However, all computed activation enthalpies exceed the experimentally derived activation enthalpy (15 kcal/mol) associated with the rate-determining step, i.e., the hydrogen abstraction from the 5'-deoxyadenosine by the product radical. For example, when imidazole is used as a model system for His interacting with the NH(3) group of the substrate, the activation enthalpy for the migration process amounts to 27.4 kcal/mol. If acetic acid is employed to mimic Asp or Glu, the activation enthalpy is somewhat lower, being equal to 24.2 kcal/mol. (ii) For a partial deprotonation of the substrate 2 at the OH group, the rearrangement mechanism consists of the dissociation of an NH(2) radical from C(2) and its association at C(1) atom. For all investigated proton acceptors (i.e., OH(-), HCOO(-), CH(3)COO(-), CH(2)NH, imidazole), the activation enthalpy for the dissociation step also exceeds 15 kcal/mol. Typical data are 20.2 kcal/mol for Ac(-) and 23.8 kcal/mol for imidazole. (iii) However, in a synergistic action of partial protonation of the NH(2) group and partial deprotonation of the OH group by the two conceivable catalytic auxiliaries Asp/Glu and His, the activation enthalpy computed is compatible with the experimental data. For imidazole and acetate as model systems, the activation enthalpy is equal to 13.7 kcal/mol. This synergistic action of the two catalytic groups is expected to take place in a physiologically realistic pH range of 6-9.5, and the present computational findings may help to further characterize the yet unknown structural details of the ethanolamine ammonia lyase's active site.     

A theoretical study on the catalytic mechanism of Mus musculus adenosine deaminase

The catalytic mechanism of Mus musculus adenosine deaminase (ADA) has been studied by quantum mechanics and two‐layered ONIOM calculations. Our calculations show that the previously proposed mechanism, involving His238 as the general base to activate the Zn‐bound water, has a high activation barrier of about 28 kcal/mol at the proposed rate‐determining nucleophilic addition step, and the corresponding calculated kinetic isotope effects are significantly different from the recent experimental observations. We propose a revised mechanism based on calculations, in which Glu217 serves as the general base to abstract the proton of the Zn‐bound water, and the protonated Glu217 then activates the substrate for the subsequent nucleophilic addition. The rate‐determining step is the proton transfer from Zn‐OH to 6‐NH₂ of the tetrahedral intermediate, in which His238 serves as a proton shuttle for the proton transfer. The calculated kinetic isotope effects agree well with the experimental data, and calculated activation energy is also consistent with the experimental reaction rate. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Mechanisms of the Knoevenagel hetero Diels-Alder sequence in multicomponent reactions to dihydropyrans: experimental and theoretical investigations into the role of water

The role of water in a multicomponent domino reaction (MCR) involving styrene, 2,4-pentanedione, and formaldehyde was studied. Whereas anhydrous conditions produced no reaction, the MCR successfully proceeded in the presence of water, affording the targeted dihydropyran derivatives with good yield. The mechanism of this MCR (Knoevenagel hetero Diels-Alder sequence) was studied with and without explicit water molecules using the SMD continuum solvation model in combination with the B3LYP density functional and the 6-311++G** basis set to compute the water and acetone (aprotic organic solvent) solution Gibbs free energies. In the Knoevenagel step, we found that water acted as a proton relay to favor the formation of more flexible six-membered ring transition state structures both in concerted (direct H(2)O elimination) and stepwise (keto-enol tautomerization and dehydration) pathways. The inclusion of a water molecule in our model resulted in a significant decrease (-8.5 kcal mol(-1)ΔG(water)(?)) of the direct water elimination activation barrier. Owing to the presence of water, all chemical steps involved in the MCR mechanism had activation free energies barriers lower than 39 kcal mol(-1) at 25 °C in aqueous solvent (<21 kcal mol(-1) ZPE corrected electronic energies barriers). Consequently, the MCR proceeded without the assistance of any catalyst.     

Mechanistic study on the gold-catalyzed C-S bond formation of α-thioallenes to form 2,5-dihydrothiophenes

The reaction mechanism of the AuCl-catalyzed reaction of the α-thioallenes to give 2,5-dihydrothiophenes has been computationally studied using DFT (B3LYP/6-31G*, SDD for Au). Calculations indicate the complexation of α-thioallene with AuCl occurs preferentially at the distal double bond, followed by the C-S bond formation, the proton transfer from the sulfur to the carbon "b", and the [1,2]-hydride shift to give the 2,5-dihydrothiophene gold complex. The proton transfer is the rate-limiting step with very high activation energy in the gas phase. In the presence of one water molecule, the activation free energy of the proton transfer was lowered by as much as 19.9 kcal/mol. Furthermore, one dichloromethane molecule stabilized all of the transition structures by its hydrogen bonds.     

QM/MM study of mechanisms for compound I formation in the catalytic cycle of cytochrome P450cam

In the catalytic cycle of cytochrome P450cam, after molecular oxygen binds as a ligand to the heme iron atom to yield a ferrous dioxygen complex, there are fast proton transfers that lead to the formation of the active species, Compound I (Cpd I), which are not well understood because they occur so rapidly. In the present work, the conversion of the ferric hydroperoxo complex (Cpd 0) to Cpd I has been investigated by combined quantum-mechanical/molecular-mechanical (QM/MM) calculations. The residues Asp(251) and Glu(366) are considered as proton sources. In mechanism I, a proton is transported to the distal oxygen atom of the hydroperoxo group via a hydrogen bonding network to form protonated Cpd 0 (prot-Cpd0: FeOOH(2)), followed by heterolytic O-O bond cleavage that generates Cpd I and water. Although a local minimum is found for prot-Cpd0 in the Glu(366) channel, it is very high in energy (more than 20 kcal/mol above Cpd 0) and the barriers for its decay are only 3-4 kcal/mol (both toward Cpd 0 and Cpd I). In mechanism II, an initial O-O bond cleavage followed by a concomitant proton and electron transfer yields Cpd I and water. The rate-limiting step in mechanism II is O-O cleavage with a barrier of about 13-14 kcal/mol. According to the QM/MM calculations, the favored low-energy pathway to Cpd I is provided by mechanism II in the Asp(251) channel. Cpd 0 and Cpd I are of similar energies, with a slight preference for Cpd I.     

An Unsual Cys-Glu-Lys Catalytic Triad is Responsible for the Catalytic Mechanism of the Nitrilase Superfamily: A QM/MM Study on Nit2

Nitrilase 2 (Nit2) is a representative member of the nitrilase superfamily that catalyzes the hydrolysis of α-ketosuccinamate into oxaloacetate. It has been associated with the metabolism of rapidly dividing cells like cancer cells. The catalytic mechanism of Nit2 employs a catalytic triad formed by Cys191, Glu81 and Lys150. The Cys191 and Glu81 play an active role during the catalytic process while the Lys150 is shown to play only a secondary role. The results demonstrate that the catalytic mechanism of Nit2 involves four steps. The nucleophilic attack of Cys191 to the α-ketosuccinamate, the formation of two tetrahedral enzyme adducts and the hydrolysis of a thioacyl-enzyme intermediate, from which results the formation of oxaloacetate and enzymatic turnover. The rate limiting step of the catalytic process is the formation of the first tetrahedral intermediate with a calculated activation free energy of 18.4 kcal/mol, which agrees very well with the experimental k_cat (17.67 kcal/mol).     

Improved interaction potentials for charged residues in proteins

Electrostatic interactions dominate the structure and free energy of biomolecules. To obtain accurate free energies involving charged groups from molecular simulations, OPLS-AA parameters have been reoptimized using Monte Carlo free energy perturbation. New parameters fit a self-consistent, experimental set of hydration free energies for acetate (Asp), propionate (Glu), 4-methylimidazolium (Hip), n-butylammonium (Lys), and n-propylguanidinium (Arg), all resembling charged residue side chains, including beta-carbons. It is shown that OPLS-AA free energies depend critically on the type of water model, TIP4P or TIP3P; i.e., each water model requires specific water-charged molecule interaction potentials. New models (models 1 and 3) are thus described for both water models. Uncertainties in relative free energies of charged residues are approximately 2 kcal/mol with the new parameters, due to variations in system setup (MAEs of ca. 1 kcal/mol) and noise from simulations (ca. 1 kcal/mol). The latter error of approximately 1 kcal/mol contrasts MAEs from standard OPLS-AA of up to 13 kcal/mol for the entire series of charged residues or up to 5 kcal/mol for the cationic series Lys, Arg, and Hip. The new parameters can be used directly in molecular simulations with no modification of neutral residues needed and are envisioned to be particular important in simulations where charged residues change environment.     

Fundamental reaction pathway and free energy profile for inhibition of proteasome by Epoxomicin

First-principles quantum mechanical/molecular mechanical free energy calculations have been performed to provide the first detailed computational study on the possible mechanisms for reaction of proteasome with a representative peptide inhibitor, Epoxomicin (EPX). The calculated results reveal that the most favorable reaction pathway consists of five steps. The first is a proton transfer process, activating Thr1-O(γ) directly by Thr1-N(z) to form a zwitterionic intermediate. The next step is nucleophilic attack on the carbonyl carbon of EPX by the negatively charged Thr1-O(γ) atom, followed by a proton transfer from Thr1-N(z) to the carbonyl oxygen of EPX (third step). Then, Thr1-N(z) attacks on the carbon of the epoxide group of EPX, accompanied by the epoxide ring-opening (S(N)2 nucleophilic substitution) such that a zwitterionic morpholino ring is formed between residue Thr1 and EPX. Finally, the product of morpholino ring is generated via another proton transfer. Noteworthy, Thr1-O(γ) can be activated directly by Thr1-N(z) to form the zwitterionic intermediate (with a free energy barrier of only 9.9 kcal/mol), and water cannot assist the rate-determining step, which is remarkably different from the previous perception that a water molecule should mediate the activation process. The fourth reaction step has the highest free energy barrier (23.6 kcal/mol) which is reasonably close to the activation free energy (～21-22 kcal/mol) derived from experimental kinetic data. The obtained novel mechanistic insights should be valuable for not only future rational design of more efficient proteasome inhibitors but also understanding the general reaction mechanism of proteasome with a peptide or protein.     

Reaction mechanism and tautomeric equilibrium of 2-mercaptopyrimidine in the gas phase and in aqueous solution: a combined Monte Carlo and quantum mechanics study

A combined Monte Carlo and quantum mechanical study was carried out to analyze the tautomeric equilibrium of 2-mercaptopyrimidine in the gas phase and in aqueous solution. Second- and fourth-order M?ller-Plesset perturbation theory calculations indicate that in the gas phase thiol (Pym-SH) is more stable than the thione (Pym-NH) by ca. 8 kcal/mol. In aqueous solution, thermodynamic perturbation theory implemented on a Monte Carlo NpT simulation indicates that both the differential enthalpy and Gibbs free energy favor the thione form. The calculated differential enthalpy is DeltaH(SH)(-->)(NH)(solv) = -1.7 kcal/mol and the differential Gibbs free energy is DeltaG(SH)(-->)(NH)(solv) = -1.9 kcal/mol. Analysis is made of the contribution of the solute-solvent hydrogen bonds and it is noted that the SH group in the thiol and NH group in the thione tautomers act exclusively as a hydrogen bond donor in aqueous solution. The proton transfer reaction between the tautomeric forms was also investigated in the gas phase and in aqueous solution. Two distinct mechanisms were considered: a direct intramolecular transfer and a water-assisted mechanism. In the gas phase, the intramolecular transfer leads to a large energy barrier of 34.4 kcal/mol, passing through a three-center transition state. The proton transfer with the assistance of one water molecule decreases the energy barrier to 17.2 kcal/mol. In solution, these calculated activation barriers are, respectively, 32.0 and 14.8 kcal/mol. The solvent effect is found to be sizable but it is considerably more important as a participant in the water-assisted mechanism than the solvent field of the solute-solvent interaction. Finally, the calculated total Gibbs free energy is used to estimate the equilibrium constant.     

Catalytic mechanism of class A beta-lactamase. I. The role of Glu166 and Serl30 in the deacylation reaction

The tetrahedral intermediate formation process, which is the first step in the deacylation reaction by class A beta-lactamase, was investigated by the ab initio molecular orbital method. In this study, benzyl penicillin was used as the substrate. From the results of our molecular dynamics study of the structure of beta-lactam antibiotics-beta-lactamase complex, the substrate, Ser70, Lys73, Ser130, Glu166 and a water molecule for the deacylation reaction were considered for construction of a model for calculation. The calculation results indicated that Glu166 plays a role in holding a water molecule, which is necessary for the deacylation reaction, and that the hydrogen bond network among Lys73Nzeta, Ser130Ogamma, and the carboxyl group of the beta-lactam antibiotics was formed by the uptake of beta-lactam antibiotics by beta-lactamase. The activation energy for this reaction was 33.3 kcal/mol, and it is very likely that the reaction occurred at body temperature. Subsequent calculation results obtained by using the model excluding Ser130 and the carboxyl group of the substrate indicated that the activation energy for this reaction was 40.8 kcal/mol, which is 7.5 kcal/mol higher than that of the previous reaction. It was found that the hydrogen bond network plays an important role in decreasing the activation energy for the tetrahedral intermediate formation reaction. Lys73Nzeta, which is located at the edge of the hydrogen bond network, played a role in forming a hydrogen bond with Glu166Oepsilon in order to help the deacylation reaction. The role of amino acid residues around the active site of class A beta-lactamase was also discussed.     

Ab initio QM/MM study of class A beta-lactamase acylation: dual participation of Glu166 and Lys73 in a concerted base promotion of Ser70

Beta-lactamase acquisition is the most prevalent basis for Gram-negative bacteria resistance to the beta-lactam antibiotics. The mechanism used by the most common class A Gram-negative beta-lactamases is serine acylation followed by hydrolytic deacylation, destroying the beta-lactam. The ab initio quantum mechanical/molecular mechanical (QM/MM) calculations, augmented by extensive molecular dynamics simulations reported herein, describe the serine acylation mechanism for the class A TEM-1 beta-lactamase with penicillanic acid as substrate. Potential energy surfaces (based on approximately 350 MP2/6-31+G calculations) reveal the proton movements that govern Ser70 tetrahedral formation and then collapse to the acyl-enzyme. A remarkable duality of mechanism for tetrahedral formation is implicated. Following substrate binding, the pathway initiates by a low energy barrier (5 kcal mol(-1)) and an energetically favorable transfer of a proton from Lys73 to Glu166, through the catalytic water molecule and Ser70. This gives unprotonated Lys73 and protonated Glu166. Tetrahedral formation ensues in a concerted general base process, with Lys73 promoting Ser70 addition to the beta-lactam carbonyl. Moreover, the three-dimensional potential energy surface also shows that the previously proposed pathway, involving Glu166 as the general base promoting Ser70 through a conserved water molecule, exists in competition with the Lys73 process. The existence of two routes to the tetrahedral species is fully consistent with experimental data for mutant variants of the TEM beta-lactamase.     

Is the peptide bond formation activated by Cu(2+) interactions? Insights from density functional calculations

The catalytic role that Cu(2+) cations play in the peptide bond formation has been addressed by means of density functional calculations. First, the Cu(2+)-(glycine)2 --> Cu(2+)-(glycylglycine) + H2O reaction was investigated since mass spectrometry low collision activated dissociation (CAD) spectra of Cu(2+)-(glycine)2 led to the elimination of a water molecule, which suggested that an intracomplex peptide bond formation might have occurred. Results show that this intracomplex condensation is associated to a very high free energy barrier (97 kcal mol(-1)) and reaction free energy (66 kcal mol(-1)) because of the loss of metal coordination during the reaction. Second, on the basis of the salt-induced peptide formation theory, the condensation reaction between two glycines was studied in aqueous solution using discrete water molecules and the conductor polarized continuum model (CPCM) continuous method. It is found that the synergy between the interaction of glycines with Cu(2+) and the presence of water molecules acting as proton-transfer helpers significantly lower the activation barrier (from 55 kcal/mol for the uncatalyzed system to 20 kcal/mol for the Cu(2+) solvated system) which largely favors the formation of the peptide bond.