Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

One‐step synthesis of 6‐acetamido‐3‐(N‐(2‐(dimethylamino) ethyl) sulfamoyl) naphthalene‐1‐yl 7‐acetamido‐4‐hydroxynaphthalene‐2‐sulfonate and its characterization with 1D and 2D NMR techniques

A one‐step method was reported for the synthesis of 6‐acetamido‐3‐(N‐(2‐(dimethylamino) ethyl) sulfamoyl) naphthalene‐1‐yl 7‐acetamido‐4‐hydroxynaphthalene‐2‐sulfonate by treating 7‐acetamido‐4‐hydroxy‐2‐naphthalenesulfonyl chloride with equal moles of N, N‐dimethylethylenediamine in acetonitrile in the presence of K₂CO₃. The chemical structure of the obtained compounds was characterized by MS, FTIR, ¹H NMR, ¹³C NMR, gCOSY, TOCSY, gHSQC, and gHMBC. The chemical shift differences of ¹H and ¹³C being δ 0.04 and 0.2, respectively, were unambiguously differentiated. Copyright © 2013 John Wiley & Sons, Ltd.     

Facile synthesis of 2‐alkylthio‐3‐amino‐4 H‐imidazol‐4‐ones and 2H‐imidazo[2,1‐b]‐1,3,4‐thiadiazin‐6(7H)‐ones via N‐vinylic iminophosphorane

2‐Alkylthio‐3‐amino‐4H‐imidazol‐4‐ ones 5 were synthesized by S‐alkylation of 2‐thioxo‐3‐amino‐4‐imidazolidinones 4 , which were obtained via cyclization of isothiocyanates 2 with hydrazine hydrate. 5l–n reacted with Ph₃P, C₂Cl₆, and NEt₃ to give 2H‐imidazo[2,1‐b]‐1,3,4‐thiadiazin‐ 6(7H)‐ones 7a–c in good yields. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:76–80, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20069     

Syntheses,characterizations, and crystal structures of tri‐ and diorganotin (IV) derivatives with 2‐mercapto‐5‐methyl‐1,3,4‐thiadiazole

A series of organotin(IV) complexes with 2‐mercapto‐5‐methyl‐1,3,4‐thiadiazole (HL) of the type R₃ Sn(L) (R = Me 1 ; Bu 2 ; Ph 3 ; PhCH₂ 4 ) and R₂Sn(L)₂ (R = CH₃ 5 ; Ph 6 ; PhCH₂ 7 ; Bu 8 ) have been synthesized. All complexes 1–8 were characterized by elemental analysis, IR,¹H, ¹³ C, and ¹¹⁹Sn NMR spectra. Among these, complexes 1 , 3 , 4 , and 7 were also determined by X‐ray crystallography. The tin atoms of complexes 1 , 3 , and 4 are all penta‐coordinated and the geometries at tin atoms of complexes 3 and 4 are distorted trigonal–bipyramidal. Interestingly, complex 1 has formed a 1D polymeric chain through Sn and N intermolecular interactions. The tin atom of complex 7 is hexa‐coordinated and its geometry is distorted octahedral. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:353–364, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20215     

2,3‐Dihydro‐1,3‐benzothiazol‐2‐iminium monohydrogen sulfate and 2‐iminio‐2,3‐dihydro‐1,3‐benzothiazole‐6‐sulfonate: a combined structural and theoretical study

The 2‐aminobenzothiazole sulfonation intermediate 2,3‐dihydro‐1,3‐benzothiazol‐2‐iminium monohydrogen sulfate, C₇H₇N₂S⁺·HSO₄⁻, (I), and the final product 2‐iminio‐2,3‐dihydro‐1,3‐benzothiazole‐6‐sulfonate, C₇H₆N₂O₃S₂, (II), both have the endocyclic N atom protonated; compound (I) exists as an ion pair and (II) forms a zwitterion. Intermolecular N—H...O and O—H...O hydrogen bonds are seen in both structures, with bonding energy (calculated on the basis of density functional theory) ranging from 1.06 to 14.15 kcal mol⁻¹. Hydrogen bonding in (I) and (II) creates DDDD and C(8)C(9)C(9) first‐level graph sets, respectively. Face‐to‐face stacking interactions are observed in both (I) and (II), but they are extremely weak.     

6‐Aza‐2′‐deoxy­uridine and N3‐anisoyl‐6‐aza‐2′‐deoxy­uridine

In 2‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐1,2,4‐triazine‐3,5(2H,4H)‐dione (6‐aza‐2′‐deoxy­uridine), C₈H₁₁N₃O₅, (I), the conformation of the glycosylic bond is between anti and high‐anti [χ = −94.0 (3)°], whereas the derivative 2‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐N⁴‐(2‐methoxy­benzoyl)‐1,2,4‐triazine‐3,5(2H,4H)‐dione (N³‐anisoyl‐6‐aza‐2′‐deoxy­uridine), C₁₆H₁₇N₃O₇, (II), displays a high‐anti conformation [χ = −86.4 (3)°]. The furanosyl moiety in (I) adopts the S‐type sugar pucker (²T₃), with P = 188.1 (2)° and τ_m = 40.3 (2)°, while the sugar pucker in (II) is N (³T₄), with P = 36.1 (3)° and τ_m = 33.5 (2)°. The crystal structures of (I) and (II) are stabilized by inter­molecular N—H⋯O and O—H⋯O inter­actions.     

6‐Propyl‐2‐thiouracil versus 6‐methoxymethyl‐2‐thiouracil: enhancing the hydrogen‐bonded synthon motif by replacement of a methylene group with an O atom

The understanding of intermolecular interactions is a key objective of crystal engineering in order to exploit the derived knowledge for the rational design of new molecular solids with tailored physical and chemical properties. The tools and theories of crystal engineering are indispensable for the rational design of (pharmaceutical) cocrystals. The results of cocrystallization experiments of the antithyroid drug 6‐propyl‐2‐thiouracil (PTU) with 2,4‐diaminopyrimidine (DAPY), and of 6‐methoxymethyl‐2‐thiouracil (MOMTU) with DAPY and 2,4,6‐triaminopyrimidine (TAPY), respectively, are reported. PTU and MOMTU show a high structural similarity and differ only in the replacement of a methylene group (–CH₂–) with an O atom in the side chain, thus introducing an additional hydrogen‐bond acceptor in MOMTU. Both molecules contain an ADA hydrogen‐bonding site (A = acceptor and D = donor), while the coformers DAPY and TAPY both show complementary DAD sites and therefore should be capable of forming a mixed ADA/DAD synthon with each other, i.e. N—H…O, N—H…N and N—H…S hydrogen bonds. The experiments yielded one solvated cocrystal salt of PTU with DAPY, four different solvates of MOMTU, one ionic cocrystal of MOMTU with DAPY and one cocrystal salt of MOMTU with TAPY, namely 2,4‐diaminopyrimidinium 6‐propyl‐2‐thiouracilate–2,4‐diaminopyrimidine–N,N‐dimethylacetamide–water (1/1/1/1) (the systematic name for 6‐propyl‐2‐thiouracilate is 6‐oxo‐4‐propyl‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₇H₉N₂OS⁻·C₄H₆N₄·C₄H₉NO·H₂O, (I), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylformamide (1/1), C₆H₈N₂O₂S·C₃H₇NO, (II), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylacetamide (1/1), C₆H₈N₂O₂S·C₄H₉NO, (III), 6‐methoxymethyl‐2‐thiouracil–dimethyl sulfoxide (1/1), C₆H₈N₂O₂S·C₂H₆OS, (IV), 6‐methoxymethyl‐2‐thiouracil–1‐methylpyrrolidin‐2‐one (1/1), C₆H₈N₂O₂S·C₅H₉NO, (V), 2,4‐diaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate (the systematic name for 6‐methoxymethyl‐2‐thiouracilate is 4‐methoxymethyl‐6‐oxo‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₆H₇N₂O₂S⁻, (VI), and 2,4,6‐triaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate–6‐methoxymethyl‐2‐thiouracil (1/1), C₄H₈N₅⁺·C₆H₇N₂O₂S⁻·C₆H₈N₂O₂S, (VII). Whereas in (I) only an AA/DD hydrogen‐bonding interaction was formed, the structures of (VI) and (VII) both display the desired ADA/DAD synthon. Conformational studies on the side chains of PTU and MOMTU also revealed a significant deviation for cocrystals (VI) and (VII), leading to the desired enhancement of the hydrogen‐bond pattern within the crystal.     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of 1,3,4‐Oxadiazole Acyclo C‐Nucleosides Bearing 5‐Methylthio{7‐substituted‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}moieties

Oxidative cyclization of the sugar hydrazones ( 3_a‐f ) derived from {7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐ylsulfanyl}acetic acid hydrazide ( 1 ) and aldopentoses 2_a‐c or aldohexoses 2_d‐f with bromine in acetic acid in the presence of anhydrous sodium acetate, followed by acetylation with acetic anhydride gave the corresponding 2‐(per‐O‐acetyl‐alditol‐l‐yl)‐5‐methylthio{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 5_a‐f ). Condensative cyclization of the sugar hydrazones ( 3_a‐f ) by heating with acetic anhydride gave the corresponding 3‐acetyl‐2‐(per‐O‐acetyl‐alditol‐1‐yl)‐2,3‐dihydro‐5‐methylthio{7‐acetyl‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 11_a‐f ). De‐O‐acetylation of the acyclo C‐nucleoside peracetates ( 5 and 11 ) with methanolic ammonia afforded the hydrazono lactones ( 7 ) and the acyclo C‐nucleosides ( 12 ), respectively. The structures of new oxadiazole derivatives were confirmed by analytical and spectral data.     

BIAN‐Fe(η6‐C6H6): Synthesis,characterization, and l‐lactide polymerization

The α‐diimine‐ligated Fe‐complex, BIAN‐Fe(C₆H₆) , was synthesized and evaluated for the polymerization of l ‐lactide. Characterization of BIAN‐Fe(C₆H₆) reveals that it is redox non‐innocent and suggests that it is an Fe(I) species bearing a radical‐anionic ligand. We will demonstrate that BIAN‐Fe(C₆H₆) is active for the ring‐opening polymerization of l ‐lactide, and that polymer is produced with, or without, the use of an added external initiator. Interestingly, very high molecular weight polymers are produced in the absence of external initiator whereas polymer molecular weights that agree with theoretical calculations are produced in the presence of external initiator. To the best of our knowledge, BIAN‐Fe(C₆H₆) is the first Fe‐based α‐diimine catalyst reported to be active for the polymerization of l ‐lactide. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2824–2830     

Supramolecular architectures in cytosinium 6‐chloronicotinate monohydrate and 5‐bromo‐6‐methylisocytosinium hydrogen sulfate

Aminopyrimidine derivatives are biologically important as they are components of nucleic acids and drugs. The crystals of two new salts, namely cytosinium 6‐chloronicotinate monohydrate, C₄H₆N₃O⁺·C₆H₃ClNO₂⁻·H₂O, ( I ), and 5‐bromo‐6‐methylisocytosinium hydrogen sulfate (or 2‐amino‐5‐bromo‐4‐oxo‐6‐methylpyrimidinium hydrogen sulfate), C₅H₇BrN₃O⁺·HSO₄⁻, ( II ), have been prepared and characterized by single‐crystal X‐ray diffraction. The pyrimidine ring of both compounds is protonated at the imine N atom. In hydrated salt ( I ), the primary R₂²(8) ring motif (supramolecular heterosynthon) is formed via a pair of N—H…O(carboxylate) hydrogen bonds. The cations, anions and water molecule are hydrogen bonded through N—H…O, N—H…N, O—H…O and C—H…O hydrogen bonds, forming R₂²(8), R₃²(7) and R₅⁵(21) motifs, leading to a hydrogen‐bonded supramolecular sheet structure. The supramolecular double sheet structure is formed via water–carboxylate O—H…O hydrogen bonds and π–π interactions between the anions and the cations. In salt ( II ), the hydrogen sulfate ions are linked via O—H…O hydrogen bonds to generate zigzag chains. The aminopyrimidinium cations are embedded between these zigzag chains. Each hydrogen sulfate ion bridges two cations via pairs of N—H…O hydrogen bonds and vice versa, generating two R₂²(8) ring motifs (supramolecular heterosynthon). The cations also interact with one another via halogen–halogen (Br…Br) and halogen–oxygen (Br…O) interactions.     

3‐Cyano‐6‐hydroxy‐4‐methyl‐2‐pyridone: two new pseudopolymorphs and two cocrystals with products of an in situ nucleophilic aromatic substitution

Four crystal structures of 3‐cyano‐6‐hydroxy‐4‐methyl‐2‐pyridone (CMP), viz. the dimethyl sulfoxide monosolvate, C₇H₆N₂O₂·C₂H₆OS, (1), the N,N‐dimethylacetamide monosolvate, C₇H₆N₂O₂·C₄H₉NO, (2), a cocrystal with 2‐amino‐4‐dimethylamino‐6‐methylpyrimidine (as the salt 2‐amino‐4‐dimethylamino‐6‐methylpyrimidin‐1‐ium 5‐cyano‐4‐methyl‐6‐oxo‐1,6‐dihydropyridin‐2‐olate), C₇H₁₃N₄⁺·C₇H₅N₂O₂⁻, (3), and a cocrystal with N,N‐dimethylacetamide and 4,6‐diamino‐2‐dimethylamino‐1,3,5‐triazine [as the solvated salt 2,6‐diamino‐4‐dimethylamino‐1,3,5‐triazin‐1‐ium 5‐cyano‐4‐methyl‐6‐oxo‐1,6‐dihydropyridin‐2‐olate–N,N‐dimethylacetamide (1/1)], C₅H₁₁N₆⁺·C₇H₅N₂O₂⁻·C₄H₉NO, (4), are reported. Solvates (1) and (2) both contain the hydroxy group in a para position with respect to the cyano group of CMP, acting as a hydrogen‐bond donor and leading to rather similar packing motifs. In cocrystals (3) and (4), hydrolysis of the solvent molecules occurs and an in situ nucleophilic aromatic substitution of a Cl atom with a dimethylamino group has taken place. Within all four structures, an R₂²(8) N—H...O hydrogen‐bonding pattern is observed, connecting the CMP molecules, but the pattern differs depending on which O atom participates in the motif, either the ortho or para O atom with respect to the cyano group. Solvents and coformers are attached to these arrangements via single‐point O—H...O interactions in (1) and (2) or by additional R₄⁴(16) hydrogen‐bonding patterns in (3) and (4). Since the in situ nucleophilic aromatic substitution of the coformers occurs, the possible Watson–Crick C–G base‐pair‐like arrangement is inhibited, yet the cyano group of the CMP molecules participates in hydrogen bonds with their coformers, influencing the crystal packing to form chains.     

Channel‐forming solvate crystals and isostructural solvent‐free powder of 5‐hydroxy‐6‐methyl‐2‐pyridone

Crystals of 5‐hydroxy‐6‐methyl‐2‐pyridone, (I), grown from a variety of solvents, are invariably trigonal (space group R); these are 5‐hydroxy‐6‐methyl‐2‐pyridone acetone 0.1667‐solvate, C₆H₇NO₂·0.1667C₃H₆O, (Ia), and 6‐methyl‐5‐hydroxy‐2‐pyridone propan‐2‐ol 0.1667‐solvate, C₆H₇NO₂·0.1667C₃H₈O, (Ib), and the forms from methanol, (Ic), water, (Id), benzonitrile, (Ie), and benzyl alcohol, (If). They incorporate channels running the length of the c axis that contain extensively disordered solvent molecules. A solvent‐free sublimed powder of 5‐hydroxy‐6‐methyl‐2‐pyridone microcrystals is essentially isostructural. Inversion‐related host molecules interact via pairs of N—H...O hydrogen bonds to form R₂²(8) dimers. Six of these dimers form large R₁₂⁶(42) puckered rings, in which the O atom of each N—H...O hydrogen bond is also the acceptor in an O—H...O hydrogen bond that involves the 5‐hydroxy group. The large R₁₂⁶(42) rings straddle the axes and form stacked columns viaπ–π interactions between inversion‐related molecules of (I) [mean interplanar spacing = 3.254 Å and ring centroid–centroid distance = 3.688 (2) Å]. The channels are lined by methyl groups, which all point inwards to the centre of the channels.     

The Synthesis of 1,4‐Bis[N‐(4/6‐Substituted Benzothiazole‐2‐yl)‐N′‐Glycosylguanidino]Benzenes

The starting material O‐protected glycosyl isothiocyanate ( 1?3 ) was refluxed with 1,4‐diaminobenzene in CHCl₃ under nitrogen atmosphere to give 1,4‐bis(N‐glycosyl)thioureidobenzene ( 4?6 ). Then 1,4‐bis[N‐(4/6‐substituted benzothiazole‐2‐yl)‐N′‐glycosylguanidino]benzenes ( 8a?8e , 9a?9e , 10a?10e ) were obtained in good yield by reaction of compounds ( 4?6 ) with 2‐amino‐4/6‐benzothizoles ( 7a?7e ) and HgCl₂ in the presence of TEA in DMF. The structures of all 18 new compounds were confirmed by IR, ¹H NMR, LC‐MS and elemental analysis. The bioactivity of anti‐HIV‐1 protease (HIV‐1 PR) and against angiotensin converting enzyme (ACE) have been evaluated.     

Synthesis and Characterization of New 7‐Substituted 6,14‐Ethenomorphinane Derivatives: N‐{5‐[(5α,7α)‐4,5‐Epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐yl]‐1,3,4‐oxadiazol‐2‐yl}arenamines

In this study, (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylic acid hydrazide ( 5 ) was synthesized by the condensation of methyl (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylate ( 4 ) with NH₂NH₂⋅H₂O. The (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylic acid 2‐[(arylamino)carbonyl]hydrazides 6a – 6q were prepared by the reaction of 5 with corresponding substituted aryl isocyanates, and the N‐{5‐[(5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐yl]‐1,3,4‐oxadiazol‐2‐yl}arenamines 7a – 7q were obtained via the cyclization reaction of 6a – 6q in the presence of POCl₃. The synthesized compounds have a rigid morphine structure, including the 6,14‐endo‐etheno bridge and the 5‐(arylamino)‐1,3,4‐oxadiazol‐2‐yl residue at C(7) adopting the (S)‐configuration (7α). The structures of the compounds were confirmed by high‐resolution mass spectrometry (HR‐MS) and various spectroscopic methods such as FT‐IR, ¹H‐NMR, ¹³C‐NMR, APT, and 2D‐NMR (HETCOR, COSY, INADEQUATE).     

Synthesis and characterization of dimeric organotin compounds {[(ArCH2)2 Sn(2‐quin)]2O}2 and crystal structure of {[(2‐ClC6 H4CH2)2Sn(2‐quin)]2O}2

Ten new dimeric organotin compounds {[(ArCH₂)₂ Sn(2‐quin)]₂O}₂ (Ar = Ph 1 , 2‐ClC₆H₄ 2 , 3‐ClC₆H₄ 3 , 4‐ClC₆H₄ 4 , 2‐FC₆H₄ 5 , 3‐FC₆H₄ 6 , 4‐FC₆H₄ 7 , 4‐BrC₆H₄ 8 , 4‐CNC₆H₄ 9 , 2,4‐Cl₂C₆H₃ 10 ) have been synthesized by dealkylation reactions of 2‐quinH with [(ArCH₂)₃Sn]₂O, and their structures have been characterized by elemental analysis, IR and NMR (¹}H, ¹³C, ¹¹⁹Sn) spectroscopies. The structures of {[(2‐ClC₆H₄CH₂)₂Sn(2‐quin)]₂O}₂ 2 have been determined by X‐ray diffraction. Studies show that compound 2 has a tetranuclear, centrosymmetric dimeric structure, with the endo‐cyclic tin atom five‐coordinated and the exo‐cyclic tin atom six coordinated. Studies also show that the nitrogen atoms of the 2‐quin ligand are coordinating to the tin atom for all the ten compounds. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:152–159, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20194     

Synthesis and properties of polyimides derived from 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene

A new phosphorus‐containing aromatic diamine, 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene ( 3 ) was synthesized by the nucleophilic aromatic substitution of 2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl)‐1,4‐dihydroxy phenylene ( 1 ) with 4‐fluoronitrobenzene, followed by catalytic hydrogenation. Light color, flexible, and creasable polyimides with high molecular weight, high glass transition, high thermal stability, improved organosolubility, and good oxygen plasma resistance were synthesized from the condensation of ( 3 ) with various aromatic dianhydrides in N,N‐dimethylacetamide, followed by thermal imidization. The number‐average molecular weights of polyimides are in the range of 7.0–8.3 × 10⁴ g/mol, and the weight‐average molecular weights are in the range of 12.5–16.5 × 10⁴ g/mol. The T_gs of these polyimides range from 230 to 304 °C by differential scanning calorimetry and from 228 to 305 °C by DMA. These polyimides are tough and flexible, with tensile strength at around 100 MPa. The degradation temperatures (T_d 5%) and char yields at 800 °C in nitrogen range from 544 to 597 °C and 59–65 wt %, respectively. Polyimides 5c and 5e , derived from OPDA and 6FDA, respectively, with the cutoff wavelength of 347 and 342 μm, respectively, show very light color. These polyimides also exhibit good oxygen plasma resistance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2897–2912, 2007     

[1‐Me‐1‐closo‐SnB11H11]− as a potential weakly coordinating anion: Synthesis of Rh(PPh3)2(1‐Me‐closo‐SnB11H11) and comparisons with Rh(PR3)2 (1‐H‐closo‐CB11 H11)

The closo‐stannaborane salt [Rh(PPh₃)₂‐(nbd)][1‐Me‐1‐closo‐SnB₁₁H₁₁] reacts with H₂ in CH₂ Cl₂ solution to afford the contact ion‐pair Rh(PPh₃)₂(1‐Me‐closo‐SnB₁₁H₁₁), which has been characterized in solution and the solid state by X‐ray diffraction. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:174–180, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20218     

Synthesis and NMR characteristics of N‐acetyl‐4‐nitro,N‐acetyl‐5‐nitro,N‐acetyl‐6‐nitro and N‐acetyl‐7‐nitrotryptophan methyl esters

N‐acetyl‐4‐nitrotryptophan methyl ester (2), N‐acetyl‐5‐nitrotryptophan methyl ester (3), N‐acetyl‐6‐nitrotryptophan methyl ester (4) and N‐acetyl‐7‐nitrotryptophan methyl ester (5) were synthesized through a modified malonic ester reaction of the appropriate nitrogramine analogs followed by methylation with BF₃‐methanol. Assignments of the ¹H and ¹³C NMR chemical shifts were made using a combination of ¹H–¹H COSY, ¹H–¹³C HETCOR and ¹H–¹³C selective INEPT experiments. Copyright © 2008 Crown in the right of Canada. Published by John Wiley & Sons, Ltd     

Supramolecular hydrogen‐bonding patterns in two cocrystals of the N(7)–H tautomeric form of N6‐benzoyladenine: N6‐benzoyladenine–3‐hydroxypyridinium‐2‐carboxylate (1/1) and N6‐benzoyladenine–DL‐tartaric acid (1/1)

Two novel cocrystals of the N(7)—H tautomeric form of N⁶‐benzoyladenine (BA), namely N⁶‐benzoyladenine–3‐hydroxypyridinium‐2‐carboxylate (3HPA) (1/1), C₁₂H₉N₅O·C₆H₅NO₃, (I), and N⁶‐benzoyladenine–DL‐tartaric acid (TA) (1/1), C₁₂H₉N₅O·C₄H₆O₆, (II), are reported. In both cocrystals, the N⁶‐benzoyladenine molecule exists as the N(7)—H tautomer, and this tautomeric form is stabilized by intramolecular N—H...O hydrogen bonding between the benzoyl C=O group and the N(7)—H hydrogen on the Hoogsteen site of the purine ring, forming an S(7) motif. The dihedral angle between the adenine and phenyl planes is 0.94 (8)° in (I) and 9.77 (8)° in (II). In (I), the Watson–Crick face of BA (N6—H and N1; purine numbering) interacts with the carboxylate and phenol groups of 3HPA through N—H...O and O—H...N hydrogen bonds, generating a ring‐motif heterosynthon [graph set R₂²(6)]. However, in (II), the Hoogsteen face of BA (benzoyl O atom and N7; purine numbering) interacts with TA (hydroxy and carbonyl O atoms) through N—H...O and O—H...O hydrogen bonds, generating a different heterosynthon [graph set R₂²(4)]. Both crystal structures are further stabilized by π–π stacking interactions.