Crystal structure refinement of CuxAg1‐xInTe2 bulk material determined from X‐ray powder diffraction data using the Rietveld method

The influence of the Cu‐content in the quaternary compounds Cu_xAg_1‐xInTe₂ (0 ≤ x ≤1) on the structural properties of the bulk material was discussed. Bulk ingot materials of Cu_xAg_1‐xInTe₂ solid solutions (x = 0.0, 0.25, 0.50, 0.75 and 1.0) have been synthesized by fusion of the constituent elements in the stoichiometric ratios in vacuum‐sealed silica tubes. The materials compositions were confirmed by using energy dispersive analysis of X‐rays (EDAX). X‐ray powder diffraction measurements were performed for all the prepared samples at 300 K in step scanning mode. The analysis of X‐ray data has indicated that the crystal structure of the prepared materials with different compositions is single‐phase polycrystalline materials corresponding to the tetragonal chalcopyrite structure with space group I 2d. The crystal structural parameters were refined by Rietveld method using the Full Prof program. The refined lattice constants (a and c), anion positional parameter, u, and the determined bond distances and angles were found to vary with composition, x, attaining zero tetragonal distortion at x ≈ 0.75, which corresponds to an ideal tetragonal unit cell. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and thermal studies on pure ADP,KDP and mixed K1‐x(NH4)xH2PO4 crystals

The investigations on the formation of mixed crystals of ammonium dihydrogen orthophosphate (ADP) and potassium dihydrogen orthophosphate (KDP) i.e. potassium ammonium dihydrogen phosphate, K_1‐x(NH₄)_xH₂PO₄ have been presented in this paper. Pure and mixed crystals of ADP and KDP have been grown by slow evaporation technique from the supersaturated solution at an ambient temperature 26±1 °C for ammonium concentration x in the range 0.0 ≤ x ≤ 1.0 in the case of mixed crystals. Crystal compositions were determined by flame atomic absorption spectroscopy and chemical analysis. The results of the X‐ray analysis of the grown crystals are also reported. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study the kinetic process of dehydration and the high temperature phase behaviour. DTA showed the distinct thermal events attributed to dehydration of ADP, KDP and K_1‐x(NH₄)_xH₂PO₄. The results of thermal analysis and chemical analysis are consistent with each other. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and investigation of (CuInSe2)x(2ZnSe)1‐x and (CuInTe2)x(2ZnTe)1‐x solid solution crystals

The (CuInSe₂)_x(2ZnSe)_1‐x and (CuInTe₂)_x(2ZnTe)_1‐x solid solution crystals prepared by Bridgman method and chemical vapor transport have been studied. The nature of the crystalline phases, the local structure homogeneity and composition of these materials have been investigated by X‐ray diffraction (XRD) and Electron Probe Microanalysis (EPMA) methods. The analysis revealed the presence of chalcopyrite‐sphalerite phase transition between 0.6 ≤ X ≤ 0.7. Lattice constants, value of σ position parameter and bond length between atoms were also calculated. It was found that the lattice parameters exhibit a linear dependence versus composition. The transmission spectra of solid solution crystals in the region of the main absorption edge were studied. It was established that the optical band gap of these materials changes non‐linearly with the X composition. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of rapid thermal annealing on Zn1‐xCdxO layers grown by radio‐frequency magnetron co‐sputtering

Zn_1‐xCd_xO layers were deposited on the sapphire substrate using the radio‐frequency magnetron co‐sputtering system. The grown Zn_1‐xCd_xO layers were carried out in the post‐annealing treatment for 1 min at the 800 °C oxygen‐ambient by the rapid thermal annealing (RTA) method. X‐ray diffraction (XRD) experiment shows that the Zn_1‐xCd_xO layers are changed from the single phase of the hexagonal structure at 0≤x ≤0.08 to the double phase of hexagonal‐and‐cubic structure at x =0.13. Thus, the maximum Cd‐composition ratio with the hexagonal structure was found out to be x =0.08. Also, the crystallinity of Zn_1‐xCd_xO layers at x =0.13 was remarkably improved by the RTA annealing treatment. This crystal quality improvement was thought to be associated with the relaxation of the compressive strain remaining in the Zn_1‐xCd_xO layers. Therefore, the results of XRD and transmittance lead that the crystal quality of the Zn_1‐xCd_xO layers forming the hexagonal ZnO phase is better than that forming the cubic CdO phase. Consequently, the reliable formation and the crystallinity of the Zn_1‐xCd_xO layers were achieved by using the RTA method of short‐time thermal‐annealing at the high temperature. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X‐ray powder diffraction structural characterization of Ba1‐xEuxTiO3 ternary oxides

The single‐phase Ba_1‐xEu_xTiO₃ (0.1≤x≤0.4) samples have been synthesized by solid state reaction under high pressure and ‐temperature. X‐ray powder diffraction data was determined by MS Modeling using Reflex Powder Indexing technique. The Ba_1‐xEu_xTiO₃ series exhibited an interesting orthorhombic‐tetragonal‐cubic structural transformation as Eu composition increases, the distinct change of the X‐ray diffraction peak profile in the vicinity of 45.5º is characteristic of structural transformation. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spectroscopy of Molecualr Crystals: A Bibliography for 1975

Abstract

Our previous thermodynamical approach was reexamined to study phase transition of anion radical salts, [(C₆H₅)₃PCH₃]⁺ _{1 ? x}[(C₆H₅)₃AsCH₃]⁺ _x(TCNQ)^? ₂,(0≤x≤1). The mechanism of the phase transition of the solid solution at 1 atm pressure was confirmed to be αy [(C₆H₅)₃PCH₃]⁺ _{1 ? x}[(C₆H₅)₃AsCH₃]⁺ _x(TCNQ)^? ₂,(0≤x≤1) βy, and the volume change assoiated with the phase transition was estimated to be ΔV =-1.3 (1-x) cm³/mol.     

Temperature dependence of lattice parameters of SBN single crystals in the vicinity of their structural phase transitions

Changes of lattice parameters of Sr_xBa_1‒xNb₂O₆ (0.35 < x < 0.72) solid solution single crystals were measured as a function of temperature. The X‐ray Bond’ method was used to carry out very precise measurements of the lattice parameters. Fine correlations between values of the lattice parameter and the Sr concentration in the solid solution of Sr_xBa_1‒xNb₂O₆ single crystals are found. A conventional analysis of lattice parameter data in terms of spontaneous strain and strain/order parameter coupling shows that a normal structural phase transition does occur. While the ferroelectric system (SBN26) displays a nearly tricritical behavior, β ≈ 0.20, the relaxor one (SBN61) complies with the two‐dimensional Ising‐model‐like criticality, β ≈ 0.17.     

Crystal structure and thermal behaviour of (Rb,Cs)BSi2O6 solid solutions

The crystal chemistry of Rb‐Cs boroleucites has been studied by means of X‐ray powder diffraction at room and elevated temperatures. The cubic I‐43d → cubic Ia3d phase transition was investigated using a series of samples prepared by solid‐state reaction along the pseudobinary system RbBSi₂O₆ ‐ CsBSi₂O₆. The Rietveld refinement of the structures of Rb_1‐xCs_xBSi₂O₆ solid solutions (x = 0.2, 0.4, 0.6, 0.8) demonstrates that the solutions with a high Rb content crystallise in the cubic I‐43d space group, and the boroleucites with a considerable Cs content have Ia3d symmetry. Rb can substitute Cs in a wide range of compositions. Within a narrow range of x = 0.5 ‐ 0.6 immiscibility was revealed. Under Rb‐Cs substitution the cubic lattice parameter, the (Rb,Cs)‐O distances, and the angles between tetrahedra of the I‐43d phase change clearly, while those of the Ia3d phase change slightly. The HTXRD data shows that the I‐43d phase transforms into a Ia3d phase on heating analogously to a change of the composition. As the Cs content increases the transition temperature decreases. The low temperature I‐43d phase shows a higher thermal expansion than the high temperature Ia3d phase. © 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim     

Optical and magnetic properties of Nd‐doped ZnO nanoparticles

Nd‐doped ZnO nanoparticles with different concentration were synthesized by sol‐gel method. The structures, magnetic and optical properties of as‐synthesized nanorods were investigated. X‐ray diffraction (XRD) and x‐ray photoelectron spectroscopy (XPS) results demonstrated that Nd ions were incorporated into ZnO lattice; but Zn_1‐xNd_xO nanoparticles with Nd concentration of x = 0.05 showed Nd₂O₃ phase, so the saturation concentration of Nd in Zn_1‐xNd_xO is less than 5 at%. Vibrating sample magnetometer (VSM) measurements indicated that Nd doped ZnO possessed dilute ferromagnetis behaviour at room temperature. Photoluminescence spectroscopy (PL) showed that Nd ions doping induced a red slight shift and decrease in UV emission with increase of Nd concentration.     

Structure and morphological stability of (Lu1–xEux)2O3 thin films

(Lu_1–xEu_x)₂O₃ smooth, crack‐free, transparent films were prepared by the Pechini sol–gel method and a spin‐coating technique. Thermogravimetric analysis, differential thermal analysis and FITR spectroscopy were used to study the chemical processes during annealing of the films. Film structure, morphology and optical properties were investigated. X‐ray diffraction (XRD) analysis reveals the cubic phase of (Lu_1–xEu_x)₂O₃ films annealed in the 600–1000 °C temperature range. Smooth and crack‐free films with thicknesses of 250–1000 nm were obtained in the 600–800 °C temperature range. The thickness upper limit (1000 nm) of morphological stability of films (Lu_1–xEu_x)₂O₃ on sapphire substrates has been studied.     

A new piezoelectric single crystal obtained by Ge doping in the SiO2 structure

The interest of Si_1–xGe_xO₂ single crystals with alpha‐quartz structure is connected to improvement of electromechanical coefficients and rise of α – β phase transition of quartz one. Growth of an α‐Si_xGe_1–xO₂ crystal was realized by a hydrothermal method of temperature gradient in autoclaves, made from Cr–Ni alloys. Nutrient material was prepared from synthetic quartz as crashed rods and placed in the bottom of autoclaves. There was loaded GeO₂ powder additive in proportions to quartz nutrient. Single crystals were investigated by electron microprobe analysis, X‐ray diffraction and atomic force microscopy. The most important result, which was obtained during the investigations, is an experimental proof of growth of α‐Si_xGe_1–xO₂ single crystals under the hydrothermal conditions. The present results thus open the possibility to tune the piezoelectric properties of these materials by varying the chemical composition. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ni1‐x Crx alloy for self controlled magnetic hyperthermia

It is known now that an increase in tumor temperature decreases the tumor resistance to chemo‐ and radiation therapies. Hyperthermia treatment of the tumor cells where damage to the healthy cells can be avoided is viable by using magnetic nanoparticles with controlled Curie temperatures. Nickel‐Chromium (Ni_1‐x Cr_x) particles with varying compositions have been investigated as thermoseeds for use in localized self controlled hyperthermia treatment of cancer. A series of Ni_1‐x Cr_x alloys, have been prepared to find the specific composition which has Curie temperature around 316‐317 K. The samples were cast by arc melting technique, and were annealed at 850 ^oC for 5 hours in sealed quartz tubes. Magnetic properties of the samples were investigated, including Curie temperature, saturation magnetization and hysterisis using Superconducting Quantum Interference Device (SQUID) and Vibrating Sample Magnetometer (VSM). The Curie temperatures of the alloys were found to decrease almost linearly from 401 K to 289 K as the Cr concentration was increased from x = 4.54 wt% to x = 5.90 wt%. The results showed that Ni_1‐x Cr_x alloys might be good candidates for self regulating magnetic hyperthermia applications. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Study on the ferroelectric phase transition in potassium lithium niobate (KLN)

The ferroelectric phase of potassium lithium niobate K₃Li_2–xNb_5+xO_15+2x (KLN) in the range of 0.15 < x < 0.5 is a very promising material for the second harmonic generation (SHG) in the blue visible region (∼410 nm). The ferroelectric phase transition was shown to occur between 400 and 500°C depending on the composition of the KLN phase. In this study several analysis techniques were used to investigate the phase transition on ferroelectric (x = 0.3) KLN samples. The temperature‐dependent measurements of the relative dielectric constant ε₃₃ provided a phase transition temperature of about 470°C. In our DTA experiments, a small but reproducible thermal effect at the phase transition in KLN was indicated. The temperature‐dependent birefringence measurement technique, applied the first time on KLN, shows a second order behaviour at a temperature of 467 °C. However, this phase transition is accompanied by a small thermal effect. The DSC analysis for the other KLN composition (x = 0.5) provided a phase transition temperature of 514 °C. The appearance of a phase transition in the paraelectric KLN phase (Nb content higher than 55 mol%) was also studied. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth process and optical investigations of Nd:NaGd (MoO4)2 crystals with varying content of Nd and Gd

In this paper, [NaGd_1‐xNdx](MoO₄)₂ crystals with x = 0.005–0.05 were grown by Czochralski method at 950 ℃ for 10 hours and subsequently characterized by absorption spectroscopy and fluorescence spectroscopy. The intensity parameters of Nd³⁺ were calculated by Judd‐Ofelt theory, and the relationship between the parameters and Nd³⁺ concentration was analyzed. The results show that with the increasing Nd³⁺ concentration, the oscillator strength, stimulated emission cross‐section, Ω_t and spontaneous transition probability decrease slightly, while the fluorescence lifetime decreases significantly. However, the fluorescence branching ratio is almost unchanged with the increasing Nd³⁺concentration. The [NaGd_1‐xNd_x](MoO₄)₂ crystal with (x = 0.01) possesses the highest quantum efficiency of 88.98%, a good fluorescence line‐width of 23 nm, a large value of σ_em·τ_f up to 0.55 × 10⁻²² cm²·s and a stimulated emission cross‐section up to 3.747 × 10⁻¹⁹ cm² for the transition from ⁴F_3/2 to⁴I_11/2 at 1064 nm. Test results indicate that [NaGd_1‐xNd_x](MoO₄)₂ crystals are an excellent gain media for the solid state laser system.     

Synthesis and characterization of hexagonal ferrites BaFe12‐2xZnxTixO19 (0 ≤ x ≤ 2) by thermal decomposition of freeze‐dried precursors

Substituted barium hexaferrites, BaFe_12‐2xZn_xTi_xO₁₉ (0 ≤ x ≤ 2), have been synthesized by thermal decomposition of freeze‐dried acetate precursors. Decomposition and phase formation were investigated by means of thermal analysis, XRD and IR spectroscopy. The initially amorphous decomposed precursor reacts to the substituted hexaferrite via a spinel‐like maghemite (γ‐Fe₂O₃) and Zn/Ti containing spinel ferrites. The synthesis method allows a decrease of the reaction temperature and time, necessary for producing a single phase hexaferrite. At relative low reaction temperatures, the substitution rate x shows remarkable differences at different iron sublattices. For x ≤ 0,8 this selective substitution results in an increase of magnetization as x grows. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

XRD,IR, and Raman investigations of structural properties of Dy2‐xHox O3 prepared by sol gel procedure

The Rare earth mixed oxides Dy_2‐xHo_x O₃ (0.0 ≤ x ≤ 2.0) solid solution was synthesized by a sol–gel process. X‐ray diffraction (XRD) data were collected and crystal structure and microstructure analyses were performed applying Rietveld refinement method. Infrared and Raman spectroscopy were used to define the microstructure and to locally probe the structure of the samples. The cationic distribution over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be randomly. The crystallite size and microstrain as well as Raman modes positions are influenced by Ho³⁺ concentration. The apparent size is isotropic but significant anisotropy is found for the microstrain with its largest value along the crystallographic direction [h00]. Inspite the single phase solid solution confirmed by Rietveld analysis for all samples, Raman spectra detected the coexistence of two phases; cubic and distorted monoclinic of too small amount or highly disordered, i.e. amorphous like, to be detected by XRD. The result indicates the ability of Raman spectroscopy to detect minor phases in solid solutions. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X‐ray diffraction analysis of powder and thin film of (Gd1‐x Yx)2O3 prepared by sol‐gel process

The mixed oxide (Gd_1‐xY_x)₂O₃ (0.0 ≤ x ≤ 1.0) were synthesized, as powder and thin film, by a sol‐gel process. X‐ray diffraction data were collected and crystal structure and microstructure analysis were performed using Rietveld refinement method. All samples were found to have the same crystal system and formed solid solutions over the whole range of x. The cationic distribution, Gd³⁺ and Y³⁺, over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be random for all values of (x). The lattice parameter is found to vary linearly with the composition (x). Replacing Gd³⁺ and Y³⁺ by each other introduces a systemic decrease in the x‐coordinate of cation position (24d) and slight changes in the oxygen coordinates. Crystallite size and microstrain analysis is performed along different crystallographic directions and anisotropic changes are found with the composition parameter (x). The average crystallite size ranges from 75 to 149 nm and the r.m.s strain from 0.027 to 0.068 x10^‐2. Textured Gd_1.841Y_0.159O₃ (400) buffer layers, with a high degree of alignment in both out‐plane and in‐plan, are successfully grown on cube textured Ni (001) tape substrates by sol–gel dip coating process. The resulting buffer layers are crack‐free, pinhole‐free, dense and smooth. YbBa₂Cu₃O_7‐x (YbBCO) thin film could be (00l) epitaxially grown on the obtained buffer layer using sol–gel dipping technique. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Multimode phonon structure of Be‐containing II ‐ VI mixed crystals determined by IR spectroscopic ellipsometry

Spectroscopic ellipsometry in the infrared spectral range 250‐5000 cm^‐1 is used for analysis of the dielectric response of Zn_1‐x‐yBe_xMg_ySe and Zn_1‐x‐yBe_xMn_ySe crystals grown by a high‐pressure Bridgman method. Ellipsometric spectra display features in the spectral range 390‐500 cm^‐1 associated with BeSe‐type phonon modes. In the optical spectra of Zn_1‐x‐yBe_xMg_ySe crystals both BeSe‐type and MgSe‐type lattice absorption bands are detected. The MgSe‐like modes are located at approximately 300 cm^‐1. The complex dielectric functions can be reproduced using a model with two or three and one or two classical damped oscillators corresponding to the BeSe‐like and the MgSe‐like transverse‐optical phonon modes, respectively. The frequencies of longitudinal‐optical phonons have been derived from the dielectric loss functions. A red‐shift of the BeSe‐like phonons frequencies with a mean rate 0.42 cm^‐1 (0.50 cm^‐1) per mole percent of Mg (Mn) incorporated to the alloy has been found for examined concentration range x, y ≤ 0.25. A noticeable damping the intensities of BeSe‐type modes with increasing fraction of Mg and Mn dopant is observed in comparison to the strengths of BeSe‐type modes in Zn_1‐xBe_xSe crystals. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of the temperature and the oxygen partial pressure on the phase formation in the system Cu – Fe – O

Copper iron oxides, Cu_1‐xFe_2+xO₄ (0 ≤ x ≤ 0.5), have been synthesized by thermal oxidation of copper ‐ iron mixtures. In this process, the phase formation and the phase stability were investigated as function of the temperature (800°C – 1200°C) and the oxygen partial pressure (1.013 x 10¹ – 1.013 x 10⁵ Pa). The phase formation starts with the reaction of the metallic components to simple oxides (Fe₃O₄, Fe₂O₃, CuO). From these simple oxides, the formation of complex oxides requires a minimum temperature of 800°C. The synthesis of single phase spinel compounds Cu²⁺_1‐2x Cu¹⁺_xFe_2+xO_4±δ is realized for 0.1 ≤ x ≤ 0.5, using specific temperature – p(O₂) – conditions for a given value of x. Remarkably, to achieve our goal, we found that the increase of x implies that of the reaction temperature and/or a decrease of the p(O₂) in the reaction gas stream. Besides, a single phase spinel CuFe₂O₄ does not exist in the temperature / p(O₂)‐field investigated. Using the results of XRD ‐ phase analysis, T ‐ p(O₂) – x – diagrams were constructed. These diagrams allow the prediction of phase compositions expected for different synthesis conditions. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effective electro‐optic coefficient of (1–x)Pb(Zn1/3Nb2/3)O3–xPbTiO3 single crystals

Refractive indices and effective electro‐optic coefficient γ_c of (1–x)Pb(Zn_1/3Nb_2/3)O₃–xPbTiO₃ (PZN‐xPT, x = 0.05, 0.09 and 0.12) single crystals were measured at 532 nm wavelength. Orientation and temperature dependences of the electro‐optic coefficient were investigated. Large electro‐optic coefficient (γ_c = 470 pm/V) was observed in [001]‐poled PZN‐0.09PT crystal. More importantly, γ_c of tetragonal PZN‐0.12PT is almost unchanged in a temperature range −20 ∼ 80 °C. The γ_c of PZN‐xPT single crystals are much higher than that of widely used electro‐optic crystal LiNbO₃ (γ_c = 20 pm/V). These results show that PZN‐xPT single crystals are very promising materials for electro‐optic modulators in optical communications.