Synthesis and structure of CpMo(CO)(dppe)H and its oxidation by Ph3C+

The reaction of CpMo(CO)(dppe)Cl (dppe = Ph2PCH2CH2PPh2) with Na+[AlH2(OCH2CH2OCH3)2]- gives the molybdenum hydride complex CpMo(CO)(dppe)H, the structure of which was determined by X-ray crystallography. Electrochemical oxidation of CpMo(CO)(dppe)H in CH3CN is quasi-reversible, with the peak potential at -0.15 V (vs Fc/Fc+). The reaction of CpMo(CO)(dppe)H with 1 equiv of Ph3C+BF4- in CD3CN gives [CpMo(CO)(dppe)(NCCD3)]+ as the organometallic product, along with dihydrogen and Gomberg's dimer (which is formed by dimerization of Ph3C.). The proposed mechanism involves one-electron oxidation of CpMo(CO)(dppe)H by Ph3C+ to give the radical-cation complex [CpMo(CO)(dppe)H].+. Proton transfer from [CpMo(CO)(dppe)H].+ to CpMo(CO)(dppe)H, loss of dihydrogen from [CpMo(CO)(dppe)(H)2]+, and oxidation of Cp(CO)(dppe)Mo. by Ph3C+ lead to the observed products. In the presence of an amine base, the stoichiometry changes, with 2 equiv of Ph3C+ being required for each 1 equiv of CpMo(CO)(dppe)H because of deprotonation of [CpMo(CO)(dppe)H].+ by the amine. Protonation of CpMo(CO)(dppe)H by HOTf provides the dihydride complex [CpMo(CO)(dppe)(H)2]+OTf-, which loses dihydrogen to generate CpMo(CO)(dppe)(OTf).     

The reactivity of [ReBr3(MeCN)(dppe)] towards gaseous nitric oxide. The X-ray structure of [ReBr3(MeCN)(dppe)] and [ReBr3(NO)(dppe)]0.57[ReOBr3(dppe)]0.43 and DFT calculations for [ReBr3(NO)(dppe)] and [ReOBr3(dppe)]

The [ReOBr₃(dppe)] (dppe=bis(diphenylophosphino)ethane) complex reacts with acetonitrile in the presence of excess of triphenylphpsphine to give a new monomeric nitrile rhenium(III) complex—[ReBr₃(MeCN)(dppe)] (1). The reaction of 1 with gaseous nitric oxide leads to the mixed [ReBr₃(NO)(dppe)]_0.57[ReOBr₃(dppe)]_0.43 complex (2) with rhenium atoms on +2 and +5 oxidation states. This paper presents the synthesis, spectroscopic characterisation and X-ray structure of 1 and 2. The geometries of [ReBr₃(NO)(dppe)] and [ReOBr₃(dppe)] have been optimized using the density functional theory (DFT) and the electronic transitions of [ReBr₃(NO)(dppe)] and [ReOBr₃(dppe)] have been calculated with the time-dependent DFT method (TDDFT). The UV–vis spectrum of 2 has been interpreted on the basis of the experimental data for [ReOBr₃(dppe)] and the calculated transitions for [ReOBr₃(dppe)] and [Re(NO)Br₃(dppe)].     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Stabilized arsenic(i) iodide: a ready source of arsenic iodide fragments and a useful reagent for the generation of clusters

The new stable low oxidation state arsenic(I) iodide reagent [(dppe)As][I] (dppe = 1,2-bis(diphenylphosphino)ethane) exhibits chemistry that is considerably different from its AsIII analogues. While [(dppe)As][I] is not crystalline, the crystal structure of the derivative salt [(dppe)As][(dppe)As2I7] is reported and is compared to that of [(dppe)As]2[SnCl6] x 2CH2Cl2. The air oxidation of [(dppe)As][I] produces crystals of the salt [Ph2P(O)CH2CH2P(OH)Ph2]2[As6I8] x 2CH2Cl2 and suggests that, in contrast to previous studies, the reaction of the univalent arsenic iodide salt with certain oxidants results in the oxidation of the dppe ligand and the release of "AsI-I" fragments that oligomerize to form AsI clusters. Such reactivity is confirmed by the reaction of 6[(dppe)As][I] with 12Me3NO and 2[PPh4][I] to produce [PPh4]2[As6I8] and 6dppeO2. The reactivity is rationalized using density functional theory calculations.     

Comprehensive thermodynamic characterization of the metal-hydrogen bond in a series of cobalt-hydride complexes

A detailed structural and thermodynamic study of a series of cobalt-hydride complexes is reported. This includes structural studies of [H(2)Co(dppe)(2)](+), HCo(dppe)(2), [HCo(dppe)(2)(CH(3)CN)](+), and [Co(dppe)(2)(CH(3)CN)](2+), where dppe = bis(diphenylphosphino)ethane. Equilibrium measurements are reported for one hydride- and two proton-transfer reactions. These measurements and the determinations of various electrochemical potentials were used to determine 11 of 12 possible homolytic and heterolytic solution Co-H bond dissociation free energies of [H(2)Co(dppe)(2)](+) and its monohydride derivatives. These values provide a useful framework for understanding observed and potential reactions of these complexes. These reactions include the disproportionation of [HCo(dppe)(2)](+) to form [Co(dppe)(2)](+) and [H(2)Co(dppe)(2)](+), the reaction of [Co(dppe)(2)](+) with H(2), the protonation and deprotonation reactions of the various hydride species, and the relative ability of the hydride complexes to act as hydride donors.     

Preparation, structures and some reactions of novel diynyl complexes of iron and ruthenium

Reactions between HC triple bond CC triple bond CSiMe3 and several ruthenium halide precursors have given the complexes Ru(C triple bond CC triple bond CSiMe3)(L2)Cp'[Cp'= Cp, L = CO (1), PPh3 (2); Cp' = Cp*, L2= dppe (3)]. Proto-desilylation of 2 and 3 have given unsubstituted buta-1,3-diyn-1-yl complexes Ru(C triple bond CC triple bond CH)(L2)Cp'[Cp'= Cp, L = PPh3 (5); Cp'= Cp*, L2 = dppe (6)]. Replacement of H in 5 or 6 with Au(PR3) groups was achieved in reactions with AuCl(PR3) in the presence of KN(SiMe3)2 to give Ru(C triple bond CC triple bond CAu(PR3)](L2)Cp'[Cp' = Cp, L = PPh3, R = Ph (7); Cp' = Cp*, L2= dppe, R = Ph (8), tol (9)]. The asymmetrically end-capped [Cp(Ph3P)2Ru]C triple bond CC triple bond C[Ru(dppe)Cp*] (10) was obtained from Ru(C triple bond CC triple bond CH)(dppe)Cp* and RuCl(PPh3)2Cp. Single-crystal X-ray structural determinations of and are reported, with a comparative determination of the structure of Fe(C triple bond CC triple bond CSiMe3)(dppe)Cp* (4), and those of a fifth polymorph of [Ru(PPh3)2Cp]2(mu-C triple bond CC triple bond C) (12), and [Ru(dppe)Cp]2(mu-C triple bond CC triple bond C) (13).     

The reaction of M(CO)3(Ph2PCH2CH2PPh2)(M = Fe, Ru) with parahydrogen: probing the electronic structure of reaction intermediates and the internal rearrangement mechanism for the dihydride products

The photochemical reaction of Ru(CO)(3)(dppe) and Fe(CO)(3)(dppe)(dppe = Ph(2)PCH(2)CH(2)PPh(2)) with parahydrogen has been studied by in situ-photochemistry resulting in NMR spectra of Ru(CO)(2)(dppe)(H)(2) that show significant enhancement of the hydride resonances while normal signals are seen in Fe(CO)(2)(dppe)(H)(2). This effect is associated with a singlet electronic state for the key intermediate Ru(CO)(2)(dppe) while Fe(CO)(2)(dppe) is a triplet. DFT calculations reveal electronic ground states consistent with this picture. The fluxionality of Ru(CO)(2)(dppe)(H)(2) and Fe(CO)(2)(dppe)(H)(2) has been examined by NMR spectroscopy and rationalised by theoretical methods which show that two pathways for ligand exchange exist. In the first, the phosphorus and carbonyl centres interchange positions while the two hydride ligands are unaffected. A second pathway involving interchange of all three ligand sets was found at slightly higher energy. The H-H distances in the transition states are consistent with metal-bonded dihydrogen ligands. However, no local minimum (intermediate) was found along the rearrangement pathways.     

Infrared and laser Raman studies of [Ni(II)(dppe)Cl2] and [Co(III)(dppe)2Cl2]PF6 (dppe = 1,2-bis(diphenylphosphino)ethane)

Infrared and laser Raman spectral investigations of [Ni(II)(dppe)Cl2] and [Co(III)(dppe)2Cl2]PF6 have been made to determine the conformation and nature of bonding in Ni(II) and Co(III) dppe complexes. The stereochemistry of the two forms of these complexes has been confirmed. The role of steric interferences in cis-Planar [Ni(II)(dppe)Cl2] complex is interpreted in terms of reduction in symmetry upon coordination. The strong trans influence of the chelating dppe ligand is observed in the [Co(III)(dppe)2Cl2]PF6 complex. Both complexes exhibit the effect of crystalline field on molecular vibrations. The Fermi resonance overtone is also observed in these complexes.     

Syntheses, structures and redox properties of some complexes containing the Os(dppe)Cp* fragment, including [{Os(dppe)Cp*}2(mu-C triple bondCC triple bond C)

The sequential conversion of [OsBr(cod)Cp*] (9) to [OsBr(dppe)Cp*] (10), [Os([=C=CH2)(dppe)Cp*]PF6 ([11]PF6), [Os(C triple bond CH)(dppe)Cp*] (12), [{Os(dppe)Cp*}2{mu-(=C=CH-CH=C=)}][PF6]2 ([13](PF6)2) and finally [{Os(dppe)Cp*}(2)(mu-C triple bond CC triple bond C)] (14) has been used to make the third member of the triad [{M(dppe)Cp*}2(mu-C triple bond CC triple bond C)] (M = Fe, Ru, Os). The molecular structures of []PF6, 12 and 14, together with those of the related osmium complexes [Os(NCMe)(dppe)Cp*]PF6 ([15]PF6) and [Os(C triple bond CPh)(dppe)Cp*] (16), have been determined by single-crystal X-ray diffraction studies. Comparison of the redox properties of 14 with those of its iron and ruthenium congeners shows that the first oxidation potential E1 varies as: Fe approximately Os < Ru. Whereas the Fe complex has been shown to undergo three sequential 1-electron oxidation processes within conventional electrochemical solvent windows, the Ru and Os compounds undergo no fewer than four sequential oxidation events giving rise to a five-membered series of redox related complexes [{M(dppe)Cp*}2(mu-C4)]n+ (n = 0, 1, 2, 3 and 4), the osmium derivatives being obtained at considerably lower potentials than the ruthenium analogues. These results are complimented by DFT and DT DFT calculations.     

Synthesis characterisation and stability of mixed aryldichalcogenide bis(diphenylphosphino)ethanenickel(II) complexes. X-ray structure of Ni(dppe)(SeC6H4S)

Mixed chalcogenide complexes of the type Ni(dppe)(SeC₆H₄S) (dppe=bis(diphenylphosphino)ethane), Ni(dppe)(SC₅H₃NCO₂) and Ni(dppe)(EC₅H₃NE′) (E=NH, E′=O; E=E′=NH) have been prepared from the reactions of Ni(dppe)Cl₂ with the appropriate aryldichalcogen or pyridine-based compound, using Et₃N as a base. The relative solution and thermal stabilities of the above compounds, other mixed chalcogen ones, Ni(dppe)(SC₆H₄O), Ni(dppe)(SC₆H₄CO₂) and Ni(dppe)(SC₆H₄NH), and the homoleptic compounds Ni(dppe)(EC₆H₄E′) (E=E′=O, E=E′=S; R=H, Me), were established by a combination of electron impact mass spectrometry (EIMS) and fast atom bombardment (FABMS). The most stable ones were the compounds with homoleptic sulfur ligands.     

Bis(diphenylphosphino)ethane nickel polychloridophenylthiolate complexes: synthesis and characterization

Transition Metal Chemistry - Reactions of (dppe)NiCl2 (dppe?=?1,2-bis(diphenylphosphino)ethane) with chlorido-substituted phenyl thiolates (RClS?) produced the corresponding...     

Cyclometalated organoplatinum(II) complexes: first example of a monodentate benzo[h]quinolyl ligand and a complex with bridging bis(diphenylphosphino)ethane

The cyclometalated complexes [Pt(ppy)R(SMe(2))] or [Pt(bhq)R(SMe(2))], where ppyH = 2-phenylpyridine, bhqH = benzo[h]quinoline and R = methyl or p-tolyl, react with bis(diphenylphosphino)ethane, dppe, in a 1:1 ratio to give the corresponding complexes [Pt(κ(1)-C-ppy)R(dppe)] or [Pt(κ(1)-C-bhq)R(dppe)], in which the ppy or bhq ligands are monodentate and dppe is chelating. The similar reaction in a 2:1 ratio gives the binuclear complexes [{Pt(ppy)R}(2)(μ-dppe)] or [{Pt(bhq)R}(2)(μ-dppe)], in which the dppe ligands are in the unusual bridging bidentate bonding mode.     

C7 and C9 carbon-rich bridges in diruthenium systems: synthesis, spectroscopic, and theoretical investigations of different oxidation States

Two methodologies of C-C bond formation to achieve organometallic complexes with 7 or 9 conjugated carbon atoms are described. A C7 annelated trans-[Cl(dppe)2Ru=C=C=C-CH=C(CH2)-C[triple bond]C-Ru(dppe)2Cl][X] (X = PF6, OTf) complex is obtained from the diyne trans-[Cl(dppe)2Ru-(C[triple bond]C)2-R] (R = H, SiMe3) in the presence of [FeCp2][PF6] or HOTf, and C7 or C9 complexes trans-[Cl(dppe)2Ru-(C[triple bond]C)n-C(CH3)=C(R1)-C(R2)=C=C=Ru(dppe)2Cl][X] (n = 1, 2; R1 = Me, Ph, R2 = H, Me; X = BF4, OTf) are formed in the presence of a polyyne trans-[Cl(dppe)2Ru-(C[triple bond]C)n-R] (n = 2, 3; R = H, SiMe3) with a ruthenium allenylidene trans-[Cl(dppe)2Ru=C=C=C(CH2R1)R2][X]. These reactions proceed under mild conditions and involve cumulenic intermediates [M+]=(C=)nCHR (n = 3, 5), including a hexapentaenylidene. A combination of chemical, electrochemical, spectroscopic (UV-vis, IR, NIR, EPR), and theoretical (DFT) techniques is used to show the influence of the nature and conformation of the bridge on the properties of the complexes and to give a picture of the electron delocalization in the reduced and oxidized states. These studies demonstrate that the C7 bridging ligand spanning the metal centers by almost 12 angstroms is implicated in both redox processes and serves as a molecular wire to convey the unpaired electron with no tendency for spin localization on one of the halves of the molecules. The reactivity of the C7 complexes toward protonation and deprotonation led to original bis(acetylides), vinylidene-allenylidene, or carbyne-vinylidene species such as trans-[Cl(dppe)2Ru[triple bond]C-CH=C(CH3)-CH=C(CH3)-HC=C=Ru(dppe)2Cl][BF4]3.     

Reactivity of carbyne and carbene complexes of molybdenum and tungsten

Summary The interconversion of carbyne, carbyne and hydride complexes derived from protonations oftrans-[M(CNMe)₂(dppe)₂](M = Mo or W) has been studied. The initial site of protonation is shown to be the isonitrile nitrogen and all protonations proceed through the common carbyne intermediatetrans-[M(CNHMe)(CNMe)(dppe)2]⁺. The CNHMe group in traps-[M(CNHMe)₂(dppe)₂]²⁺ is shown to be susceptible to electrophilic attack at N and nucleophilic attack at ligating C, the new complexestrans-[W(CNH2Me)(CNHMe)(dppe)₂](BF₄)₃ andtrans-[Mo(CHNHMe)(CNHMe)(dppe)2]BF4 being formed, respectively.     

Synthesis and Structure of Di［bis（diphenylphosphino）ethane］ Copper（Ⅱ） Dinitrate

ＳｙｎｔｈｅｓｉｓａｎｄＳｔｒｕｃｔｕｒｅｏｆＤｉ［ｂｉｓ（ｄｉｐｈｅｎｙｌｐｈｏｓｐｈｉｎｏ）ｅｔｈａｎｅ］Ｃｏｐｐｅｒ（Ⅱ）ＤｉｎｉｔｒａｔｅＬＩＮＫｕｎ－Ｈｕａ；ＹＡＮＧＲｕｉ－Ｎａ；ＣＡＩＤｏｎｇ－Ｍｅｉ；ＪＩＮＤｏｕ－Ｍａｎ（ＨｅｎａｎＩｎ...     

Substitution reactions of [Ru(dppe)(CO)(H(2)O)(3)][OTf](2)

The labile nature of the coordinated water ligands in the organometallic aqua complex [Ru(dppe)(CO)(H(2)O)(3)][OTf](2) (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); OTf = OSO(2)CF(3)) has been investigated through substitution reactions with a range of incoming ligands. Dissolution of 1 in acetonitrile or dimethyl sulfoxide results in the facile displacement of all three waters to give [Ru(dppe)(CO)(CH(3)CN)(3)][OTf](2) (2) and [Ru(dppe)(CO)(DMSO)(3)][OTf](2) (3), respectively. Similarly, 1 reacts with Me(3)CNC to afford [Ru(dppe)(CO)(CNCMe(3))(3)][OTf](2) (4). Addition of 1 equiv of 2,2'-bipyridyl (bpy) or 4,4'-dimethyl-2,2'-bipyridyl (Me(2)bpy) to acetone/water solutions of 1 initially yields [Ru(dppe)(CO)(H(2)O)(bpy)][OTf](2) (5a) and [Ru(dppe)(CO)(H(2)O)(Me(2)bpy)][OTf](2) (6a), in which the coordinated water lies trans to CO. Compounds 5a and 6a rapidly rearrange to isomeric species (5b, 6b) in which the ligated water is trans to dppe. Further reactivity has been demonstrated for 6b, which, upon dissolution in CDCl(3), loses water and coordinates a triflate anion to afford [Ru(dppe)(CO)(OTf)(Me(2)bpy)][OTf] (7). Reaction of 1 with CH(3)CH(2)CH(2)SH gives the dinuclear bridging thiolate complex [[(dppe)Ru(CO)](2)(mu-SCH(2)CH(2)CH(3))(3)][OTf] (8). The reaction of 1 with CO in acetone/water is slow and yields the cationic hydride complex [Ru(dppe)(CO)(3)H][OTf] (9) via a water gas shift reaction. Moreover, the same mechanism can also be used to account for the previously reported synthesis of 1 upon reaction of Ru(dppe)(CO)(2)(OTf)(2) with water (Organometallics 1999, 18, 4068).     

Mixed dinitrogen-organocyanamide complexes of molybdenum(0) and their protic conversion into hydrazide and amidoazavinylidene derivatives

Organocyanamides, Ntbd1;CNR(2) (R = Me or Et), react with trans-[Mo(N(2))(2)(dppe)(2)] (1, dppe = Ph(2)PCH(2)CH(2)PPh(2)), in THF, to give the first mixed molybdenum dinitrogen-cyanamide complexes trans-[Mo(N(2))(NCNR(2))(dppe)(2)] (R = Me 2a or Et 2b) which are selectively protonated at N(2) by HBF(4) to yield the hydrazide(2-) complexes trans-[Mo(NNH(2))(NCNR(2))(dppe)(2)][BF(4)](2) (R = Me, 3a, or Et, 3b). On treatment with Ag[BF(4)], oxidation and metal fluorination occur, and the ligating cyanamide undergoes an unprecedented beta-protonation at the unsaturated C atom to form trans-[MoF(NCHNR(2))(dppe)(2)][BF(4)](2) (R = Me, 4a, or Et, 4b) compounds which present the novel amidoazavinylidene (or amidomethyleneamide) ligands. Complexes 4 are also formed from the corresponding compounds 3, with liberation of ammonia and hydrazine. The crystal structure of 2b was determined by single-crystal X-ray diffraction analysis which indicates that the N atom of the amide group has a trigonal planar geometry.     

Synthesis and ligand exchange reactions of P2Pd(II) and P2Pt(II) salicylaldimates

Reaction of (dppe)MCl(2)(dppe = 1,2-bis(diphenylphosphino)ethane) with 2-(N-phenyliminomethyl)phenol leads to air-stable (dppe)M(N,O) chelates (M = Pd, 1a; M = Pt, 1b). The N-4-methylphenyl derivative of 1a has been characterized by X-ray analysis. The N,O ligands are kinetically labile and exchange occurs in solution in the presence of other salicylaldimines. In the presence of anilines, a metal-mediated imine exchange process occurs. Hammett analysis reveals that the platinum complexes are sensitive to the electronics at N but not at O. Electron donating groups on the N-aryl ring stabilize the metal complex.     

Highly electrophilic, 16-electron [Ru(P(OMe)(OH)(2))(dppe)(2)](2+) complex turns H(2)(g) into a strong acid and splits a Si-H bond heterolytically. Synthesis and structure of the novel phosphorous acid complex [Ru(P(OH)(3))(dppe)(2)](2+)

The highly electrophilic, 16-electron, coordinatively unsaturated [Ru(P(OMe)(OH)(2))(dppe)(2)][OTf](2) complex brings about the heterolytic activation of H(2)(g) and spontaneously generates HOTf. In addition, trans-[Ru(H)(P(OMe)(OH)(2))(dppe)(2)](+) and an unprecedented example of a phosphorous acid complex, [Ru(P(OH)(3))(dppe)(2)](2+), are formed. The [Ru(P(OMe)(OH)(2))(dppe)(2)][OTf](2) complex also cleaves the Si-H bond in EtMe(2)SiH in a heterolytic fashion, resulting in the trans-[Ru(H)(P(OMe)(OH)(2))(dppe)(2)](+) derivative.     

η-Cycloheptatrienyl-molybdenum chemistry: Tertiary phosphine,alkyl, hydrido,halogeno and related derivatives

The preparation and properties of the compounds [Mo(η-C₇H₇)(dppe)Y] (Y = Cl, I, Me, H), [Mo(η-C₇H₇)(dppe)Cl]⁺A^? (A = PF₆, Br or I), {[Mo(η-C₇H₇)(dppe) Br]PF₆}, {[Mo(η-C₇H₇)(dppe)I]PF₆} and {[Mo(η-C₇H₇)(dppe)L]PF₆} (L = CO, MeCN, or dppe) are described.