Separation of nucleosides using capillary electrochromatography

The analysis of nucleosides and nucleotides have in most cases been performed by HPLC using either reversed-phase HPLC with gradient elution or using reversed-phase ion-pair chromatography. In this paper we have explored the possibility of using capillary electrochromatography (CEC) in order to avoid the use of gradients or ion-pairing reagents. CEC is in many ways comparable to HPLC, but CEC is theoretically able to provide better separations due to the higher efficiency caused by the flowfront being more plug-like as also is the case in CE, which is to be compared to the more parabolic flow observed in HPLC. The separation of six nucleosides (adenosine, cytidine, guanosine, inosine, thymidine and uridine) was investigated with respect to concentration of buffers, pH, amount of acetonitrile, temperature and voltage in order to optimise the separation. Baseline separation was achieved for the six nucleosides in less than 13 min using a background electrolyte consisting of (5 mM acetic acid, 3 mM triethylamine, pH 5.0)-acetonitrile (92:8, v/v).     

Separation of related opiate compounds using capillary electrochromatography

Capillary electrophoretic separations have been investigated for six controlled narcotic analgesic compounds having related structures. Owing to the similar charge-to-mass ratios of these compounds, capillary zone electrophoresis failed to provide a satisfactory separation, whereas a baseline-resolved separation was achieved in 10 min using micellar electrokinetic chromatography. Column efficiencies of 40,000-150,000 plates/m were obtained with a 50 cm long, 50 microm inner diameter (ID) capillary using 50 mM sodium dodecyl sulfate (SDS) in a 50 mM borate solution containing 12% isopropanol. In contrast, separation of this mixture by capillary electrochromatography proved to be significantly superior. The capillary was 15 cm long, with an ID of 75 microm, and was packed with 1.5 microm nonporous octadecyl silica (ODS) particles. The mobile phase consisted of 80% 10 mM tris(hydroxymethyl)aminomethane (Tris) and 20% acetonitrile, and contained 5 mM SDS. A complete separation was obtained in 2.5 min with an efficiency of 250,000-500,000 plates/m.     

Comparison of separation behavior of benzodiazepines in packed capillary electrochromatography and open-tubular capillary electrochromatography

Packed column capillary electrochromatography (CEC), open-tubular CEC and microcolum liquid chromatography (LC) using a cholesteryl silica bonded phase have been studied to compare the retention behavior for benzodiazepines. It has been found that packed column CEC gives better resolution, faster analysis time than microcolumn LC for benzodiazepines maintaining similar selectivity except for some solutes which are charged species under the separation conditions. However, open-tubular CEC gave different selectivities to a larger extent for charged benzodiazepines from that which should be produced by the chromatographic properties of the cholesteryl silica phase. Charged species migration times are mainly influenced by electrophoretic mobility rather than the chromatographic interactions.     

Separation of sulfonamides by capillary electrochromatography

Summary The dual separation mechanism exhibited by capillary electrochromatography is demonstrated by the simultaneous separation of sulfonamides as charged and neutral species over a pH range of 2.5 to 6.9. The neutral sulfonamides were separated according to the difference in their hydrophobicities while charged components were separated by the differences in their electrophoretic mobilities. The limitation of capillary electrochromatography for acidic components was also examined.     

Separation of enantiomers by capillary electrochromatography

The current popularity of capillary electrochromatography (CEC) has led to an increasing number of studies on the development and evaluation of enantioselective CEC systems. These studies clearly demonstrate that the most prominent advantage of electrically driven separation methods, the vastly increased column efficiency as compared to pressure-driven chromatography, can also be experimentally achieved for the separations of enantiomers. In analogy to high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE), several approaches have been used. The addition of a chiral selector to the mobile phase is the simplest method. Less erroneous and more elegant approaches are those that use open-tubular, conventional packed, and monolithic columns containing chiral stationary phases that stereoselectively interact with enantiomers. This review evaluates the new techniques and compares them to enantioselective HPLC and CE. Further, it describes the various concepts of enantioselective CEC and focuses on the current ‘state-of-the-art' column technology.     

Separation of structurally related estrogens using isocratic elution pressurized capillary electrochromatography

In this paper, the pressurized capillary electrochromatography (pCEC) with UV detection was utilized for the separation and determination of three structurally related estrogens, such as diethylstilbestrol (DES), hexestrol (HEX) and dienestrol (DE), which were difficult to be separated by capillary electrophoresis (CE) and HPLC due to their similarity in the structure and charge-to-mass ratios. Experiments were carried out in a commercially available pCEC instrument using a capillary column packed with 3 microm octadecyl silica (ODS). Surfactant sodium dodecyl sulfate (SDS) was introduced in the mobile phase to enhance the speed of analysis. The effective factors on the retention time and separation resolution, such as the applied voltage, supplementary pressure, the pH and the concentration of the buffer solution, the concentration of SDS, and the content of acetonitrile in the mobile phase, were evaluated. Based on the investigation, 31% (v/v) acetonitrile and 69% (v/v) of 10 mmol/L phosphate buffer (pH 6.5) containing 1.0 mmol/L SDS at an applied voltage of -12 kV and a supplementary pressure of 1000 psi were found to be the optimal conditions for pCEC to separate the three estrogens. The method also had been applied to the analysis of fish muscle samples spiked with estrogens.     

Separation of rhubarb anthraquinones by capillary electrochromatography

Summary A rapid, simple method for packing capillary electrochromatography (CEC) columns with HPLC stationary phases is described. The basis of the method is the use of a vacuum to suck a slurry of stationary phase into the fused-silica tubing, a procedure which takes approximately ten seconds only, then compression of the stationary phase by means of an HPLC pump. These packed CEC columns have been investigated for the separation of five anthraquinones from rhubarb. Separation of the anthraquinones inRheum palmatum L. under optimized conditions is presented.     

Separation of peptides by pressurized capillary electrochromatography

A pressurized electrochromatography (pCEC) instrument with gradient capability was used in this work for separation of peptides. Three separation modes, namely, pCEC, high-performance liquid chromatography and capillary electrophoresiscan be carried out with the instrument. In pCEC mode, the mobile phase is driven by both electroosmotic flow and pressurized flow, facilitating fine-tuning in selectivity of neutral and charged species. A continuous gradient elution can be carried out conveniently on this instrument, which demonstrates that it is more powerful than isocratic pCEC for separation of complicated samples. The effects of applied voltage, supplementary pressure and ion-pairing agents on separation of peptides in gradient pCEC were investigated. The effects of flow-rate of the pump and the volume of the mixer on resolution were also evaluated.     

Separation of peptides by strong cation-exchange capillary electrochromatography

Separation of small peptides on ion-exchange capillary electrochromatography (IE-CEC) with strong cation-exchange packing (SCX) as stationary phase was investigated. It was observed that the number of theoretical plates for small peptides varied from 240000 to 460000/m, and the relative standard deviation for t0 and the migration time of peptides were less than 0.57% and 0.27%, respectively for ten consecutive runs. Unusually high column efficiency has been explained by the capillary electrophoretic stacking and chromatofocusing phenomena during the injection and separation of positively charged peptides. The sample buffer concentration had a marked effect on the column efficiency and peak area of the retained peptides. The influences of the buffer concentration and pH value as well as the applied voltage on the separation were investigated. It has been shown that the electrostatic interaction between the positively charged peptides and the SCX stationary phase played a very important role in IE-CEC, which provided the different separation selectivity from those in the capillary electrophoresis and reversed-phase liquid chromatography. A fast separation of ten peptides in less than 3.5 min on IE-CEC by adoption of the highly applied voltage was demonstrated.     

Separation of basic solutes by reversed-phase capillary electrochromatography

The separation of basic solutes at low pH by capillary electrochromatography (CEC) has been investigated. The feasibility of separation of basic solutes by CEC was demonstrated. Influence of operational parameters, solvent composition, pH, temperature on retention and selectivity of the separation of a mixture of basic, neutral and acidic drug standards has been investigated. The observed elution behavior has been modeled to account for both chromatographic retention and differential electrophoretic mobility of the solutes. This model was verified experimentally. It is demonstrated in this work that the elution window of solutes in reversed-phase CEC is expanded to range from -1 to infinity.     

Separation of phenylthiohydantoin amino acids by capillary electrochromatography

Capillary electrochromatography (CEC) was employed as a rapid and high-efficiency method for the isocratic separation of all 20 important phenylthiohydantoin (PTH) amino acids, the end products of Edman degradation during N-terminal protein sequencing. For this purpose, 75 microm ID fused-silica capillaries were packed with standard 3 microm Hypersil octadecyl silica (ODS) particles using a two-step column fabrication process, which represents a fast, reliable and efficient means of producing long-term stable columns. The influence of solvent composition, pH, type of buffer cation, buffer concentration, and temperature on retention behavior of PTH amino acids was investigated. Same-day and day-to-day reproducibility of the retention times (over a period of two months) were found to be better than 3%. When comparing this new technique with traditional reversed phase-high performance liquid chromatography (RP-HPLC) methods applied in automated protein sequenators, CEC shows essentially shorter separation times and superior resolution.     

Separation of Trp-Arg and Arg-Trp using G-quartet-forming DNA oligonucleotides in open-tubular capillary electrochromatography

DNA oligonucleotides that form intramolecular G-quartet structures were investigated as stationary phase reagents for separation of mixtures of the isomeric dipeptides Trp-Arg and Arg-Trp in open-tubular capillary electrochromatography (OTCEC). The oligonucleotides included a thrombin-binding aptamer that forms a biplanar G-quartet structure and an oligonucleotide that forms a 4-plane G-quartet structure. Fluorescence, circular dichroism and UV-visible absorbance spectroscopies were used in batch solution studies to indicate interactions between the dipeptides and the biplanar G-quartet structure. Results for OTCEC separations were compared with results obtained for capillary zone electrophoresis separations on a bare capillary. Temperature studies suggest that resolution is improved when the G-quartet structure is partially destabilized, but control experiments in which potassium chloride was not included in the mobile phase indicate that the G-quartet structure nevertheless plays a role in the separations.     

Separation of the insecticidal pyrethrin esters by capillary electrochromatography

A simple, rapid technique for the direct separation and quantification of the six insecticidally active pyrethrin esters in typical extracts and commercial formulations by capillary electrochromatography (CEC) has been described. The separation of the pyrethrin esters was achieved by optimizing several parameters including the length of stationary phase, the mobile phase composition and column temperature. The mobile phase composition had the most pronounced effect toward resolving these structurally similar compounds. A ternary mobile phase composed of acetonitrile-aqueous buffer-tetrahydrofuran (55:35:10) provided the elutropic solvent strength needed to resolve the six esters from an extract mixture in under 16 min. A 25 cm packed bed of Hypersil 3 microm C18 stationary phase was used with the ternary mobile phase at 25 degrees C and 30 kV voltage. These conditions also yielded excellent separation of the pyrethrin esters in two different commercially available insecticidal formulations. In addition, the developed CEC method was shown to be a fast and easy way of quantifying the amount of these esters in typical pyrethrin formulations.     

Separation of acidic compounds by strong anion-exchange capillary electrochromatography

Separation of the acidic compounds in the ion-exchange capillary electrochromatography (IE-CEC) with strong anion-exchange packing as the stationary phase was studied. It was observed that the electroosmotic flow (EOF) in strong anion-exchange CEC moderately changed with increase of the eluent ionic strength and decrease of the eluent pH, but the acetonitrile concentration in the eluent had almost no effect on the EOF. The EOF in strong anion-exchange CEC with eluent of low pH value was much larger than that in RP-CEC with Spherisorb-ODS as the stationary phase. The retention of acidic compounds on the strong anion-exchange packing was relatively weak due to only partial ionization of them, and both chromatographic and electrophoretic processes contributed to separation. It was observed that the retention values of acidic compounds decreased with the increase of phosphate buffer and acetonitrile concentration in the eluent as well as the decrease of the applied voltage, and even the acidic compounds could elute before the void time. These factors also made an important contribution to the separation selectivity for tested acidic compounds, which could be separated rapidly with high column efficiency of more than 220000 plates/m under the optimized separation conditions.     

Miniaturization of capillary electrochromatography using an ultrashort capillary column

The instrumentation for miniaturization of capillary electrochromatography was devised and an injection method for this apparatus was proposed. By using an ultra short capillary column (15 mm packed length, 36 mm total length, 75 microm inner diameter, packed with cation exchange supports), the separation of five biochemical compounds was performed within 1 min. The high separation efficiency of 9780 plates was achieved by using an ultrashort capillary column. The miniaturized instrumentation for capillary electrochromatography might be utilized as one of the possible methods in microfabricated analysis or in an alternative approach to it.     

Separation of parabens in capillary electrochromatography using poly(styrene-divinylbenzene-methacrylic acid) monolithic column

In this study, a series of poly(styrene-divinylbenzene-methacrylic acid) monolithic capillaries was used as the separation column of CEC for the analyses of parabens in commercial pharmaceutical and cosmetic products. The results showed that the chromatographic characteristics of these analytes were strongly affected by the preparation condition of the monolithic column including monomer content, porogenic solvent composition, and polymerization time. Baseline separations were markedly sped up by lowering the polymerization time without any obvious loss of resolution. Furthermore, mobile-phase composition (pH, ACN, and electrolyte concentration) was also able to effectively improve the separation behavior. Similar to the influence of lowering the polymerization time, retention times for all analytes were significantly shortened in the CEC method by decreasing the electrolyte concentration in the mobile phase.     

Microchip-based capillary electrochromatography using packed beds

Integration of a packed column onto a microchip for performance of capillary electrochromatography (CEC) is described. The quartz device incorporated a cross-injector, and a double weir trapping design for formation of 1, 2 and 5 mm long CEC columns. Three fluorescent dyes were baseline-resolved with plate numbers of 330,(330,000 plates/m; height equivalent to a theoretical plate, H = 3.0 microm) for BODIPY 493/503, 360 (360,000 plates/m; H = 2.8 microm) for rhodamine 123 and 244 (244,000 plates/m; H = 4.1 microm) for acridine orange (AO) with 500 V applied on a 1 mm long column. The 2 mm column yielded approximately 1.8 times more theoretical plates than did the 1 mm column, when operated at the same flow rate. Van Deemter plots were obtained for the three column lengths, showing increased plate height for the 5 mm length. A 2 mm column gave peak height and area relative standard deviation (RSD) values of 2.5 and 3.3%, respectively, as averages for the three dyes (n = 15). The RSD for the dye retention times was 1% (n = 6) over one day, and 3% (n = 30) over five days. Indirect fluorescence detection of thiourea and of amino acids was possible using a neutral indicator dye (BODIPY 493/503), with a detection limit of 10 microM for amino acids.     

Separation of basic and acidic compounds by capillary electrochromatography using monolithic silica capillary columns with zwitterionic stationary phase

A novel monolithic silica column with zwitterionic stationary phase was prepared by in-situ covalent attachment of phenylalanine to a 3-glycidoxypropyltriethoxysilane-modified silica monolith. Due to the zwitterionic nature of the resulting stationary phase, the density and sign of the net surface charge, and accordingly the direction and magnitude of electroosmotic flow in this column during capillary electrochromatography could be manipulated by adjusting the pH values of the mobile phase. CEC separations of various acidic and basic compounds were performed on the prepared column in anodic and weakly cathodic EOF modes, respectively. The peak tailing of basic compounds in CEC on a silica column could be alleviated at optimized buffer compositions. Besides the electrophoretic mechanism and weak hydrophobic interaction, weak cation- and anion-exchange interactions are also involved in the separations of acids and bases, respectively, on the zwitterionic column.     

Separation of polyethylene glycol-modified proteins by open tubular capillary electrochromatography

This study involves the characterization of six polyethylene glycol-modified proteins by open tubular capillary electrochromatography, a high-resolution, versatile and reproducible technique for the analysis of biomolecules and pharmaceuticals. Optimized conditions were obtained with respect to type of capillary modification (cholesterol and octadecyl), applied voltage (+20 and -20 kV), buffer pH (2.14-8.14) and addition of methanol modifier to the mobile phase. Electrochromatograms were obtained with both cathodic and anodic applied electric fields. In the case of one PEG-protein, superoxide dismutase, a comparison was made to a previous study. Reproducibility and column lifetime were also evaluated in assessing the usefulness of the method.     

Separation of phenylureas by capillary electrochromatography on porous graphitic carbon

Summary In this work the potential of porous graphitic carbon (PGC) as a new stationary phase in, capillary electrochromatography has been explored. Its behavior under the action of an applied potential is described for the separation of phenylureas. First, it was shown that porous graphitic carbon enables high efficiency in capillary electrochromatography over a wide range of mobile phase velocities. It was then demonstrated that this material might be responsible for degradation of the solutes at frit-PGC interfaces. Although electrolytic degradation reactions are suspected to occur on this type of conductive material, voltamperometric measurements furnished no clear evidence. A specific injection procedure is proposed for avoiding degradation of the solutes at the inlet interface before their chromatographic separation. Comparison of the retention behavior of phenylureas on PGC in liquid chromatography and in capillary electrochromatography show that the retention propertiets of PGC are altered by application of an electrical field, because this modifies the donor-acceptor interactions between the solutes and the stationary phase.