Earth-abundant coal-derived carbon nanotube/carbon composites as efficient bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries

The exploration of active and robust electrocatalysts for both the oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)is the bottleneck to realize the commercialization of rechargeable metal-air batteries and regenerative fuel cells.Here we report facile synthesis of three-dimensional(3 D)carbon nanotube(CNT)/carbon composites using earth-abundant coal as the carbon source,hydrogen reductant and heteroatom dopant to grow CNTs.The prepared composite featuring 3 D structural merits and multiple active sites can efficiently catalyze both ORR and OER,affording high activity,fast kinetics,and long-term stability.With the additional incorporation of manganese,the developed catalyst afforded a potential difference of 0.80 V between ORR at the half wave potential and OER at a current density of 10 mA cm^-2.The optimized sample has presented excellent OER performance within a constructed solar-powered water splitting system with continuously generating oxygen bubbles at anode.Notably,it can be further used as a durable air-electrode catalyst in constructed Zn-air battery,delivering an initial discharge/charge voltage gap of 0.73 V,a remained voltaic efficiency of 61.2%after 160 cycles and capability to power LED light for at least 80 h.This study provides an efficient approach for converting traditional energy resource i.e.coal to value-added alternative oxygen electrocatalysts in renewable energy conversion systems.     

Hybrid nanostructures based on layered silicates and nitrogen-containing organic compounds

Organic-inorganic hybrid nanostructures were prepared by treatment of synthetic layered silicates of the montmorillonite structure with aliphatic and aromatic amines. The interaction of organic compounds with the surface of layered silicates was studied by transmission electron microscopy, IR spectroscopy, and differential scanning calorimetry.     

Polypropylene/carbon nanotube magnetic composites obtained using carbon nanotubes from sawdust

Magnetic polypropylene (PP) nanocomposites with different loadings (from 0.5 to 20 wt %) of carbon nanotubes with iron (CNT‐Fe) were fabricated using the melt‐mixing method. The carbon nanotubes were synthesized by pyrolysis of sawdust from the furniture industry. The morphological characterization shows homogenous dispersion of the filler in the polymer matrix. The addition of only 0.5 wt % CNT‐Fe already results in ferromagnetic behavior in the diamagnetic polymer matrix. The thermal properties were investigated using thermogravimetric analysis and differential scanning calorimetry. The results show an increase in the maximum degradation, crystallization, and melting temperatures of the nanocomposites compared with neat PP. The nanocomposites showed improvement in terms of mechanical and oxygen permeability properties. A very significant result of the work is the high remnant magnetization and coercivity values of the nanocomposites at room temperature whereas most of the works on similar systems show magnetic properties only at very low temperatures.     

Adsorption of Eu(III) on iron oxide/multiwalled carbon nanotube magnetic composites

Iron oxide/multiwalled carbon nanotube magnetic composites (denoted as magnetic composites) were synthesized and characterized in detail. The magnetic composites can be separated from aqueous solution easily by using magnetic separation method. The application of magnetic composites in the removal of Eu(III) from large volumes of aqueous solutions was studied. The results indicated that the sorption of Eu(III) on the magnetic composites was strongly dependent on pH values and weakly dependent on ionic strength. The sorption of Eu(III) on the magnetic composites was mainly dominated by inner-sphere surface complexation. The linear sorption isotherms of Eu(III) suggested that Eu(III) sorption on the magnetic composites was far from saturation. The large sorption capacity and the easy magnetic separation method indicate that the magnetic composites may be a promising suitable material in nuclear waste management in future.     

Nanocomposites of polystyrene-b-polyisoprene copolymer with layered silicates and carbon nanotubes

Nanocomposites of polystyrene-b-polyisoprene (PS-b-PI) copolymer with layered-smectite clays (organically modified montmorillonite) and nanostructured clay-carbon nanotube hybrids were prepared. The diblock copolymer was synthesized by anionic polymerization using high-vacuum techniques and was molecularly characterized by size exclusion chromatography. Carbon nanotubes were developed on clay-supported nickel nanoparticles by the CCVD method. Nanotubes attached on the clay platelets were then chemically modified to create ester groups on their surfaces. PS-b-PI nanocomposites at various polymer to reinforcement loadings were prepared by solution intercalation. The final nanocomposites were characterized by powder X-ray diffraction, FT-IR spectroscopy, thermal analysis, and scanning electron microscopy. The experiments complemented with viscometry measurements reveal the successful incorporation of the reinforcements in the polymer mass.     

Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: fabrication and properties

The functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were obtained by Friedel–Crafts acylation, which introduced aromatic amine groups onto the sidewall. And the grafted yield was adjusted by controlling the concentration of the catalyst. The composite solutions containing f‐MWCNTs and polyacrylonitrile (PAN) were then prepared by in‐situ or ex‐situ solution polymerization. The resulting solutions were electrospun into composite nanofibers. In the in‐situ polymerization, morphological observation revealed that f‐MWCNTs was uniformly dispersed along the axes of the nanofibers and increased interfacial adhesion between f‐MWCNTs and PAN. Furthermore, two kinds of f‐MWCNTs/PAN composite nanofibers had a higher degree of crystallization and a larger crystal size than PAN nanofibers had, so the specific tensile strengths and modulus of the composite nanofibers were enhanced. And the thermal stability of f‐MWCNTs/PAN from in‐situ method was higher than that of ex‐situ system. When the f‐MWCNTs content was less than 1 wt%, the specific tensile strengths and modulus of nanofibers were enhanced with increase in the amounts of f‐MWCNTs, and f‐MWCNTs/PAN of in‐situ system provided better mechanical properties than that of ex‐situ system. Copyright © 2010 John Wiley & Sons, Ltd.     

碳纳米管/聚苯胺复合材料的制备及应用研究进展

碳纳米管/聚苯胺复合材料因其独特的电磁学、热力学和机械性能,在很多领域具有潜在应用价值.本文作者对近年来该复合材料的制备方法、性能及应用方面的研究进展进行了综述.     

Magnetic spherical carbon as an efficient adsorbent for the magnetic extraction of phthalate esters from lake water and milk samples

Magnetic spherical carbon was synthesized by a facile hydrothermal carbonization procedure with biomass glucose as the carbon precursor and nanoclusters iron colloid as magnetic precursor. The textures of the as‐prepared magnetic spherical carbon were characterized by nitrogen adsorption–desorption isotherms, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy and vibration sample magnetometry. Results indicated that the magnetic spherical carbon possessed high surface area as well as strong magnetism, which endows the material with good adsorption capability and easy separation properties. To assess its absorption performance, the magnetic spherical carbon was employed as adsorbent for the extraction and preconcentration of phthalate esters from lake water and milk samples before high‐performance liquid chromatographic analysis. Some key parameters that could influence the enrichment efficiency were investigated. Under the optimum conditions, a good linearity was achieved with the linear correlation coefficients higher than 0.9973. The limits of detection (S/N = 3) were 0.05–0.08 ng/mL for lake water and 0.1–0.2 ng/mL for milk samples. The recoveries of the analytes for the method were in the range 80.1–112.6%.     

N-doped porous carbon nanofibers sheathed pumpkin-like Si/C composites as free-standing anodes for lithium-ion batteries

Dramatic capacity fading and poor rate performance are two main obstacles that severely hamper the widespread application of the Si anode owing to its large volume variation during cycling and low intrinsic electrical conductivity.To mitigate these issues,free-standing N-doped porous carbon nanofibers sheathed pumpkin-like Si/C composites(Si/C-ZIF-8/CNFs)are designed and synthesized by electrospinning and carbonization methods,which present greatly enhanced electrochemical properties for lithium-ion battery anodes.This particular structure alleviates the volume variation,promotes the formation of stable solid electrolyte interphase(SEI)film,and improves the electrical conductivity.As a result,the as-obtained free-standing Si/C-ZIF-8/CNFs electrode delivers a high reversible capacity of 945.5 mAh g^-1 at 0.2 A g^-1 with a capacity retention of 64% for 150 cycles,and exhibits a reversible capacity of 538.6 mA h g^-1 at 0.5 A g^-1 over 500 cycles.Moreover,the full cell composed of a freestanding Si/C-ZIF-8/CNFs anode and commercial LiNi_1/3Co_1/3Mn_1/3O₂(NCM)cathode shows a capacity of 63.4 mA h g^-1 after 100 cycles at 0.2 C,which corresponds to a capacity retention of 60%.This rational design could provide a new path for the development of high-performance Si-based anodes.     

Ordered mesoporous carbon as an efficient and reversible adsorbent for the adsorption of fullerenes

An ordered mesoporous carbon, CMK-3, was synthesized using a mesoporous siliceous material, SBA-15, as the template. CMK-3 was characterized and used for the adsorption of fullerenes C60 and C70. It was found that the adsorption capacity of CMK-3 is 4 times higher than that of activated carbon. The adsorption equilibrium isotherms of C60 and C70 on CMK-3 were studied for both single and binary systems. The reversibility of fullerene adsorption on CMK-3 was also explored. The results showed that CMK-3 is an effective and reversible adsorbent for the separation of fullerenes by adsorption.     

Direct electron transfer of horseradish peroxidase and its electrocatalysis based on carbon nanotube/thionine/gold composites

Horseradish peroxidase (HRP) was incorporated into multiwalled carbon nanotube/thionine/Au (MTAu) composite film by electrostatic interactions between positively charged HRP and negatively charged MTAu composite. The results of electrochemical impedance spectroscopy (EIS) confirmed adsorption of HRP on the surface of MTAu modified GC electrode. Moreover, the electrochemical results showed that HRP retained its bioactivity and bioelectrocatalytical activity, and also showed good direct electron transfer behavior on such a composite film.     

Enhanced conductivity composites for aircraft applications: carbon nanotube inclusion both in epoxy matrix and in carbonized electrospun nanofibers

The potential of carbonized electrospun nanofiber mats to render epoxy resin composites for aircraft applications electrically and thermally more conductive was investigated. The effect of carbon nanotube inclusion both inside the carbon nanofiber and in the epoxy resin matrix material was studied, in order to reveal any synergistic effects of multilevel presence of nanosized reinforcements on the conductivity and mechanical properties. The carbon nanotube inclusion into the carbonized nanofibers increased the electrical conductivity of the samples by 20–50% and the thermal conductivity by approximately three times leading to a higher value than that of the conventional composites. The preparation of layered composites with a conductive upper layer containing nonwoven carbon nanofabric and a load bearing lower layer with conventional unidirectional carbon fiber reinforcement can offer a cost‐effective and weight‐saving solution for the replacement of metal meshes in structural aircraft composites. Copyright © 2014 John Wiley & Sons, Ltd.     

Correction to: Adsorption of Eu(III) on iron oxide/multiwalled carbon nanotube magnetic composites

Journal of Radioanalytical and Nuclear Chemistry - In the original publication of the article, Reference [20] was not cited in Figure 1 and Figure 2 captions as the authors...     

Self-assembled ultrathin carbon black/carbon nanotube films as electrodes for microsupercapacitors

Journal of Solid State Electrochemistry - The ability to control the morphology of composite thin films is essential to construct networks exhibiting the desired final properties. In this work, we...     

Nitrogen-doped magnetic carbon nanoparticles as catalyst supports for efficient recovery and recycling

Palladium nanoparticles were deposited with high dispersion and stability on nitrogen-doped magnetic carbon nanoparticles by a simple impregnation method, and their catalytic performance was investigated for Heck, Suzuki, and Sonogashira coupling reactions.     

Synergistic effect of mediator–carbon nanotube composites for dehydrogenases and peroxidases based biosensors

Very sensitive, low cost and reliable NADH and H₂O₂ sensors were realised and used for development of enzyme based biosensors. The active surface of the electrodes was modified with a nanocomposite obtained by modification of SWNT with a proper mediator: Meldola Blue (for NADH) and Prussian Blue (for H₂O₂). Low applied potential of − 50 mV vs. Ag/AgCl reference electrode proved the synergistic effect of nanocomposite materials towards NADH and H₂O₂ detection. Biosensors for malic acid and alkylphenols have been developed, using mediator-functionalised-SWNT-based electrodes and two different classes of enzymes: NAD⁺-dependent dehydrogenases and peroxidases. Immobilization of the enzymes was realised using a series of different procedures — adsorption, Nafion membrane, sol–gel and glutaraldehyde, in order to find the best configuration for a good operational stability. A higher sensitivity comparing with other reported biosensors of about 12.41 mA/M·cm² was obtained for l-malic acid biosensor with enzyme immobilised in Nafion membrane. Phenol, 4-t-octylphenol and 4-n-nonylphenol were used as standard compounds for HRP based biosensor. Fast biosensor response and comparable detection limit with HPLC methods were achieved.     

Sulfonated liquid crystalline polyesters as resin matrix for single wall carbon nanotube and nanodiamond composites

The focus of this study is on incorporating pendant sulfonate groups along the backbone of a liquid crystalline polyester (LCPE) with the aim to improve the dispersion of single wall carbon nanotubes (SWNTs) and nanodiamonds (NDs). Two LCPE matrices, one sulfonated (LCPE‐S) and one nonsulfonated reference polymer (LCPE‐R), were successfully synthesized via a melt condensation method using aromatic and aliphatic AB, AA, and BB‐type monomers. Upon the introduction of SWNT and ND particles, the glass transition temperature (T_g) of the sulfonated LCPE increased from 21.5 °C to 41.0 °C and 41.9 °C, for SWNTs and NDs, respectively. When sulfonate groups were absent, a decrease in T_g was observed. The storage modulus (E′) followed a similar trend, i.e., E′ increased from 1.3 GPa to 5.2 GPa and 3.4 GPa, upon the addition of NDs and SWNTs. The LCPE‐S showed a lower thermal stability due to the loss of sulfonate groups, i.e. the 5% weight loss temperature (T) is ～280 °C for LCPE‐S vs. 333 °C for LCPE‐R. The decomposition temperature increased somewhat upon addition of the nanoparticles. The ability of dispersing carbon‐based nanostructures combined with an accessible melt processing window makes sulfonated LCPs attractive matrices towards preparing nanocomposites with improved thermal and mechanical properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.