高分辨率快速数字化光声CT乳腺肿瘤成像

提出了一种基于聚焦线性阵列探测器的快速光声计算机断层成像技术（光声CT）.在光声二维图像重建中,根据阵列探测器机械扫描和电子扫描相结合的组合扫描模式,提出了改进的有限场滤波反投影重建算法.一方面该算法适合多元探测器旋转扫描模式,另一方面探测器的指向性函数作为反投影的权重因子提高了系统的横向分辨率.同时,该成像系统还利用柱面声透镜实现Z轴方向上的聚焦扫描以实现三维层析成像.实验中,这套成像系统空间分辨率达到0.2mm,Z轴方向分辨率为1.5mm,扫描一幅二维图像仅需150s,得到 关键词： 光声CT 有限场滤波反投影算法 声透镜聚焦 乳腺肿瘤检测     

生物医学光声成像

能够对组织体中的光学吸收体进行量化评估的光声成像(photoacoustic imaging)是一种有发展前景的医学成像模式.文章综述了处于快速发展阶段的光声成像技术.文章首先介绍光声成像的物理基础--光声效应.在此基础上,阐述光声成像技术的优势所在(与光学以及超声成像相比较).然后讨论目前该领域的主要技术路线,包括扫描层析术、计算机层析术以及原位探测成像技术.最后简要总结了光声成像技术在生物医学领域中的主要应用.     

Stroboscopic ultrahigh-resolution full-field optical coherence tomography

We present a new technique that produces en face tomographic images with a 10-micros acquisition time per image. The setup consists of an interference microscope with stroboscopic illumination provided by a xenon arc flash lamp (10-micros flashes at 15 Hz). The tomographic images are obtained from two phase-opposed interferometric images recorded simultaneously by two synchronized CCD cameras. Transverse resolution better than 1.0 microm is achieved by use of high-numerical-aperture microscope objectives. The short coherence length of the source yields an axial resolution of 0.9 microm. 3 x 3 pixel binning leads to a detection sensitivity of 71 dB. Our system is suitable for various applications, particularly in biology for in vivo cellular-level imaging.     

改进的同步迭代算法在光声血管成像中的应用

光声成像结合了光学成像和声学成像的优点，是一种高分辨率，高对比度的无损伤医学成像技术.一种改进的同步迭代算法应用于光声图像重建.仿真和模拟结果表明，与传统的代数迭代算法相比，在90°，135°，180°的有限场光声成像中，此算法对测量误差的校正和迭代次数的收敛上具有较大的优势，图像重建的速度和成像质量都有了明显的提高.实验中，一种圆形扫描结构的光声成像装置，用于180°的有限场扫描，利用改进的同步迭代算法，重建出了高对比度和高分辨率（60μm）的鸡胚胎光声血管图像.实验证明，这种算法的应用，大幅度减少了数据采集时间，为光声成像技术运用于实时监测血流灌注和肿瘤光动力治疗的血管损伤效应提供了潜在的应用价值. 关键词： 光声成像 有限角度 代数迭代算法 光声血管成像     

基于OPO脉冲激发的血糖光声检测影响因素研究

构建了一套基于侧向模式的光学参数振荡(optical parameter oscillator,OPO)脉冲激光激发-超声传感的血糖光声检测系统,并且将激发波长、激光能量、探测频率和温度等对血糖光声检测的影响,在系统结构上进行了有效融合。然后,以不同浓度的葡萄糖溶液作为测试样品,实验研究了几个因素(激发波长、激光能量、探测频率和温度等)对葡萄糖光声检测和浓度预测的影响。实验得到了不同浓度葡萄糖溶液在不同影响因素条件下的葡萄糖实时光声信号和光声峰峰值,同时,为了得到不同因素对葡萄糖光声值和浓度预测的影响规律,通过线性回归算法建立了葡萄糖光声峰峰值与各因素变化,以及不同因素下光声峰峰值与浓度梯度的映射关系模型。实验和模型预测结果表明：相比1 200和1 300 nm波长而言,1 064 nm波长下的葡萄糖光声峰峰值与浓度梯度模型预测效果最好,模型相关系数达到0.986;葡萄糖光声峰峰值随着脉冲激光输出能量的增大呈线性增大趋势,且葡萄糖浓度预测准确度随着激光输出能量增大有所提高;根据不同探测频率的超声探测器捕获的葡萄糖光声峰峰值与浓度梯度建模效果来看,响应频率为1 MHz的超声探测器相比2.5和10 MHz的超声探测器,在葡萄糖光声信号探测上具有更好的探测效果;最后,实验发现,葡萄糖光声峰峰值随着温度和浓度的增大均呈线性增大趋势,且浓度预测误差随着温度的升高逐渐增大。     

Multifocal optical-resolution photoacoustic microscopy in vivo

Although ultrasound arrays have been exploited in photoacoustic imaging to improve imaging speed, ultrasound-array-based optical-resolution photoacoustic microscopy (OR-PAM) has never been achieved previously to our knowledge. Here we present our development of multifocal OR-PAM using a microlens array for optical illumination and an ultrasound array for photoacoustic detection. Our system is capable of imaging hemoglobin concentration and oxygenation in individual microvessels in vivo at high speed. Compared with a single focus, multiple foci reduce the scanning load and increase the imaging speed significantly. The current multifocal system can acquire 1000 × 500 × 200 voxels at ~10 μm lateral resolution within 4 min.     

Experimental verification of the effects of optical wavelength on the amplitude of laser generated ultrasound in polymer-matrix composites

Laser ultrasound is now integrated into the manufacturing process of some of the most modern aircraft for the inspection of composite parts. Unfortunately, for some material and process combinations, laser-ultrasound suffers from a lack of sensitivity. In laser-ultrasound generation, optical penetration depth plays a very important role. It was shown that changing the generation wavelength from the 10.6 microm of the CO2 laser to the 3-4 microm range can significantly improve generation efficiency. In this paper, ultrasonic displacements are compared to measurements of optical penetration depth in different polymer-matrix composites. Ultrasonic waves were generated using an optical parametric oscillator operating in the 3.0-3.5 microm band and optical penetration depth spectra were evaluated using quantitative photoacoustic spectroscopy. The relative amplitudes of the generated ultrasonic waves track closely the optical penetration depth spectra. These results experimentally demonstrate the importance of optical penetration in the laser-ultrasound generation process.     

Frequency-domain photoacoustic phased array probe for biomedical imaging applications

We report the development of a frequency-domain biomedical photoacoustic imaging system that utilizes a continuous-wave laser source with a custom intensity modulation pattern, ultrasonic phased array for signal detection, and processing coupled with a beam-forming algorithm for reconstruction of photoacoustic correlation images. Sensitivity to optical contrast was demonstrated using tissue-mimicking phantoms and in-vivo tissue samples.     

In vivo three-dimensional photoacoustic tomography of a whole mouse head

An in vivo photoacoustic imaging system was designed and implemented to image the entire small animal head. A special scanning gantry was designed to enable in vivo imaging in coronal cross sections with high contrast and good spatial resolution for the first time to our knowledge. By use of a 2.25 MHz ultrasonic transducer with a 6 mm diameter active element, an in-plane radial resolution of approximately 312 microm was achieved. Deeply seated arterial and venous vessels in the head measuring up to 1.7 cm in diameter were simultaneously imaged in vivo with 804 nm wavelength laser excitation of photoacoustic waves.     

Imaging interferometric microscopy

We introduce and demonstrate a new microscopy concept: imaging interferometric microscopy (IIM), which is related to holography, synthetic-aperture imaging, and off-axis-dark-field illumination techniques. IIM is a wavelength-division multiplex approach to image formation that combines multiple images covering different spatial-frequency regions to form a composite image with a resolution much greater than that permitted by the same optical system using conventional techniques. This new type of microscopy involves both off-axis coherent illumination and reinjection of appropriate zero-order reference beams. Images demonstrate high resolution, comparable with that of a high-numerical-aperture (NA) objective, while they retain the long working distance, the large depth of field, and the large field of view of a low-NA objective. A Fourier-optics model of IIM is in good agreement with the experiment.     

Thermal-light full-field optical coherence tomography

We have built a high-resolution optical coherence tomography (OCT) system, based on a Linnik-type interference microscope, illuminated by a white-light thermal lamp. The extremely short coherence length of the illumination source and the large aperture of the objectives permit resolution close to 1 microm in three dimensions. A parallel detection scheme with a CCD camera provides cross-section (x-y) image acquisition without scanning at a rate of up to 50 Hz. To our knowledge, our system has the highest resolution demonstrated to date for OCT imaging. With identical resolution in three dimensions, realistic volume rendering of structures inside biological tissues is possible.     

基于中红外分布反馈量子级联激光器的光声光谱技术用于痕量甲烷气体检测

由于工业监控和环境检测的需要,甲烷气体检测日益得到人们的关注。研究了基于中红外分布反馈量子级联激光器(DFB-QCL)的光声光谱技术,并应用于痕量甲烷的检测。自主研发的DFB-QCL室温工作时的激射波长在7.6μm附近,覆盖了甲烷的特征吸收谱线1 316.83cm-1。待测甲烷气体充入亥姆霍兹光声谐振腔中,DFB-QCL的工作频率为234Hz、室温脉冲工作时峰值功率为80mW。中红外光经过甲烷吸收后,产生的声波信号经麦克风检测,由锁相放大器对信号进行采集并输入计算机进行处理。按信噪比为1计算,得到甲烷的探测极限为189nmol.mol-1。     

Improved in vivo photoacoustic microscopy based on a virtual-detector concept

Recently an in vivo high-resolution backward-mode photoacoustic microscope was developed that shows potential for applications in dermatology and related cancer research. However, the limited depth of focus of the large-numerical-aperture (NA) ultrasonic lens employed in this system causes the image quality to deteriorate significantly in the out-of-focus region. To solve this problem, we devised and explored, for the first time to our knowledge, a virtual-detector-based synthetic-aperture focusing technique, combined with coherence weighting, for photoacoustic microscopy with such a large-NA transducer. Images of phantoms show that the proposed technique improves the -6 dB lateral resolution from 49-379 to 46-53 microm and increases the signal-to-noise ratio by up to 29 dB, depending on the distance from the ultrasonic focal point. In vivo experiments show that the technique also provides a clearer representation of the vascular distribution in the rat's scalp.     

Comparison of optical detection system ,PVDF detection system, and PVDF needle hydrophone for optoacoustic tomography

Optoacoustic tomography (PAT) is a two-dimensional medical imaging method that has the advantage of optical contrast and resolution of ultrasonic waves. The detection systems with a high sensitivity can be used for detecting small tumors, located deeply in human tissues, such as the breast. In this study, the sensitivity of existing ultrasonic detection systems has been compared experimentally with that by using thermoelastic waves as a broadband ultrasonic source. For the comparison, an optical stress transducer(OST), a polyvinylidene difluoride (PVDF) sheet and a calibrated PVDF needle hydrophone were used.To ensure all of the detection systems interrogated by the same ultrasonic field, a small optical instrument that fixed the generating laser head was constructed. The sensitivity was evaluated by measuring signalto-noise ratios (SNRs) and noise equivalent pressures (NEPs). The PVDF system, with a 4-kPa NEP has a 22 dB better performance than the OST. The OST showed nearly the same sensitivity as the hydrophone for detecting ultrasound waves at a 1-cm distance in water. PVDF detection system provides a useful tool for imaging of soft tissues because of its high sensitivity and broad detection range.     

Monitoring stimulated Raman scattering with photoacoustic detection

A capability of high-frequency ultrasound detection to monitor the process of energy deposition into a molecular system via Raman excitation is experimentally demonstrated. It is shown that the generated ultrasound signal is directly proportional to the optical signal generated in stimulated Raman scattering. Ultrasound detection provides a simple way to discriminate against laser-induced breakdown and allows for the quantification of the stimulated Raman scattering process where direct optical detection is not available. Additionally, it can be used for stimulated Raman imaging in deep tissue, provided that the generated photoacoustic signal is sufficiently strong.     

多参量光声成像及其在生物医学领域的应用

光声成像兼具声学成像和光学成像两者的优点, 因而成为近十年来发展最迅速的生物医学成像技术之一. 本文介绍了光声成像的特点及其相对于广泛应用的光学成像技术和声学成像技术的优点; 其次, 解释了光声成像的成像原理, 在此基础上介绍了光声断层成像和光声显微镜这两种典型的光声成像方案, 并介绍了它们的技术特点; 然后, 介绍了光声成像对生物组织的生化特性、组织力学特性、血液流速分布、温度分布参数、微结构特性等多信息参量的提取能力, 及其在生物系统的结构成像、功能成像、代谢成像、分子成像、基因成像等多领域的应用; 最后, 展望了光声成像在生物医学领域的应用潜力并讨论了其局限性.     

Noncontact photoacoustic imaging achieved by using a low-coherence interferometer as the acoustic detector

We report on a noncontact photoacoustic imaging (PAI) technique in which a low-coherence interferometer [(LCI), optical coherence tomography (OCT) hardware] is utilized as the acoustic detector. A synchronization approach is used to lock the LCI system at its highly sensitive region for photoacoustic detection. The technique is experimentally verified by the imaging of a scattering phantom embedded with hairs and the blood vessels within a mouse ear in vitro. The system's axial and lateral resolutions are evaluated at 60 and 30?μm, respectively. The experimental results indicate that PAI in a noncontact detection mode is possible with high resolution and high bandwidth. The proposed approach lends itself to a natural integration of PAI with OCT, rather than a combination of two separate and independent systems.     

A new optical method for the detection of in-plane motion of ultrasound propagating in metals

This paper describes a laser optical technique for the detection of in-plane (IP) motion of ultrasonic waves propagating in solids. This interference-based laser optical technique includes a tiny square indentation with a width of about 30 microm on the sample surface and a relatively simple optical arrangement. The current technique is applied for the detection of in-plane motions of Lamb waves propagating in a thin brass plate. Measurement of S(0) mode dominated by in-plane motion in the low fd (frequency times thickness) regime is successfully demonstrated with the current technique. The newly proposed non-contact technique provides an alternative other than the heterodyne and Fabry-Perot techniques for the detection of IP motions with a relatively simple optical arrangement. This technique is not readily applicable to general NDE applications, where a position scan or an arbitrary selection of inspection location is needed. However, this technique can be useful in the areas such as fixed-position ultrasound monitoring or laboratory research activities involving optical detection of IP motion.     

一种光纤光声SO2气体浓度传感器的研究

论述了光声光谱信号的产生原理,研究了一种新型光声光纤SO2气体浓度传感器,建立了适合应用光纤作为传感器的数学模型。采用染料激光器作为激励光源,用光纤位移传感器代替传统的微音器,测量被气体吸收并转变为声压信号,从而对SO2气体浓度进行测量。给出了实验结果,分析了影响灵敏度的主要因素,提出了相应的改进措施。     

Feasibility of photoacoustic tomography for ophthalmology

For the eyeball composed of membrane and liquid, the contrast of ultrasound imaging is not high due to its small variance in acoustic impedance. As a new imaging modality, photoacoustic tomography combines the advantages of pure optical and ultrasonic imaging together and can provide high resolution, high contrast images. In this paper, the feasibility of photoacoustic tomography for ophthalmology is studied experimentally. A Q-switched Nd:YAG pulsed laser with 7-ns pulse width is used to generate photoacoustic signal of a porcine eyeball in vitro. The two-dimensional (2D) optical absorption image of the entire eyeball is reconstructed by time-domain spherical back projection algorithm. The imaging results agree well with the histological structure of the eyeball and show a high imaging contrast.