Complexes of heteroscorpionate trispyrazolylborate ligands. Part VI. Carboxylate induced conversion of mono-ligand Tp′M(L) into bis-ligand Tp′2M complexes (M=Co(II) and Cu(II))

A series of homoleptic complexes of hexacoordinate cobalt(II) and copper(II) complexes with 3,5-disubstituted homo- and heteroscorpionate tris(pyrazolyl)borate anionic ligands (Tp′) were synthesized, i.e. bis[hydrotris(3-phenyl,5-methylpyrazol-1-yl)borato]cobalt(II), bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]cobalt(II) and bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]copper(II) and their structures were elucidated crystallographically. The complexes were also formed spontaneously during attempted metathesis of the corresponding Tp′M(NCS) complexes into Tp′M(OOCCH(OH)CH₃) complexes. In the case of the analogous conversion applied for the thiocyanato [hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3,5-dimethylpyrazol-1-yl)boratocobalt(II) complex with sodium carboxylates (lactate, pyruvate and 2-hydroxybutyrate), the cross-transfer of pyrazolyl residues between starting anionic ligands was observed resulting in formation of bis-ligand homo- and heteroleptic Tp′CoTp″ complexes, where Tp′, Tp″ were tris(pyrazolyl)borates composed of n 3(5)-phenyl,5(3)-methylpyrazolyl and (3−n) 3,5-dimethylpyrazolyl residues (n=0–3) identified by mass spectrometry. Metathesis of thiocyanate in thiocyanato hydrotris(3-phenyl,5-methylpyrazol-1-yl)boratocobalt(II) into pyruvate led to the isolation of stable the pyruvato hydrotris(3-phenyl,5-methylpyrazol-1-yl)boratocobalt(II) complex, the structure of which was determined crystallographically. The Tp′ ligands are η³ coordinated to metal ions in every case, whereas the pyruvate anion is coordinated through carboxylate and carbonyl oxygen atoms to the cobalt center. Two rotational isomers distinguishable by ¹H NMR spectroscopy for the hexacoordinate bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]cobalt(II) complex were detected in solution.     

An ENDOR study of oxomolybdenum(V) tris(pyrazolyl)borate complexes; identification of couplings to boron and other heteroatoms

¹¹B hyperfine and quadrupolar couplings have been observed by the electron magnetic resonance techniques electron nuclear double resonance and hyperfine sublevel correlation spectroscopy for some tris(pyrazolyl)borato‐oxomolybdenum(V) and related nitrosyl complexes including a dinuclear B–B linked complex. The spectra are interpreted according to the electron delocalization onto the ligands, especially the pyrazolylborate. Copyright © 2002 John Wiley & Sons, Ltd.     

Ligand to ligand charge transfer in (hydrotris(pyrazolyl)borato)(triphenylarsine)copper(I)

Emission and UV-vis absorption spectra of (hydrotris(pyrazolyl)borato)(triphenylarsine)copper(I), (CuTpAsPh3), (hydrotris(pyrazolyl)borato)(triethylamine)copper(I), (CuTpNEt3), and (hydrotris(pyrazolyl)borato)(triphenylphosphine)copper(I), (CuTpPPh3), are reported. The spectra of the arsine complex contain low-energy bands (with a band maximum at 16,500 cm(-1) in emission and a weak shoulder centered at about 25,000 cm(-1) in absorption) that are not present in the corresponding spectra of the amine or phosphine complexes. The lowest energy electronic transition is assigned to ligand to ligand charge transfer (LLCT) with some contribution from the metal. This assignment is consistent with PM3(tm) molecular orbital calculations that show the HOMO to consist primarily of pi orbitals on the Tp ligand (with some metal orbital character) and the LUMO to be primarily antibonding orbitals on the AsPh3 ligand (also with some metal orbital character). The absorption shoulder shows a strong negative solvatochromism, indicative of a reversal or rotation of electric dipole upon excitation, and consistent with a LLCT. The trends in the energies of the electronic transitions and the role of the metal on the LLCT are discussed.     

Structural comparisons of silver(I) complexes of third-generation ligands built from tridentate (o-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)) versus bidentate poly(1-pyrazolyl)methane units (o-C(6)H(4)[CH(2)OCH(2)CH(pz)(2)](2)) (pz = pyrazolyl ring)

The new bitopic, bis(1-pyrazolyl)methane-based ligand o-C6H4[CH2OCH2CH(pz)2]2 (L2, pz = pyrazolyl ring) is prepared from the reaction of (pz)2CHCH2OH (obtained from the reduction of (pz)2CHCOOH with BH3.S(CH3)2) with NaH, followed by the addition of alpha,alpha'-dibromo-o-xylene. The reaction of L2 with AgPF6 or AgO3SCF3 yields {o-C6H4[CH2OCH2CH(pz)2]2(AgPF6)}n or {o-C6H4[CH2OCH2CH(pz)2]2(AgO3SCF3)}n, respectively. Both compounds in the solid state have tetrahedral silver(I) centers arranged in a 1D coordination polymer network. The analogous ligand based on tris(1-pyrazolyl)methane units, o-C6H4[CH2OCH2C(pz)3]2 (L3), reacts with AgO3SCF3 to form a similar coordination polymer, {o-C6H4[CH2OCH2C(pz)3]2(AgO3SCF3)}n. In this case, each tris(pyrazolyl)methane unit in L3 adopts the kappa2-kappa0 bonding mode. Crystallization of a 3:1 mixture of AgO3SCF3 and L3 yields {o-C6H4[CH2OCH2C(pz)3]2(AgO3SCF3)2}n, in which the tris(1-pyrazolyl)methane units adopt a kappa2-kappa1 coordination mode.     

Zur Elektronenstruktur hochsymmetrischer Verbindungen der f‐Elemente. 36 [1] Parametrische Analyse der optischen Spektren eines orientierten Tris(hydrotris(1‐pyrazolyl)borato)praseodym(III)‐Einkristalls

Electronic Structures of Highly Symmetrical Compounds of f Elements. 36 [1] Parametric Analysis of the Optical Spectra of an Oriented Tris(hydrotris(1‐pyrazolyl)borato)praseodymium(III) Single Crystal The absorption and luminescence spectra of polycrystalline tris(hydrotris(1‐pyrazolyl)borato)‐praseodymium(III) (PrTp₃) were measured at room temperature as well as at low temperatures. At room temperature the “polarized” luminescence spectra of a small oriented PrTp₃ single crystal could also be recorded. On the basis of these spectroscopic findings the underlying crystal field splitting pattern could be derived, and simulated by fitting the free parameters of a phenomenological Hamiltonian, achieving a reduced r.m.s. deviation of 17.3 cm^—1 for 37 assignments. On the basis of the parameters used, the global ligand field strength experienced by the Pr³⁺ central ion as well as the individual ligand field strength associated with one Tp ligand are determined, nephelauxetic and relativistic nephelauxetic effects are estimated, and the experimentally orientiented nonrelativistic and relativistic molecular orbital schemes in the f range are set up.     

Syntheses of aluminum and zinc alkyl complexes of a highly fluorinated tris(pyrazolyl)borate using [HB(3,5-(CF3)2Pz)3]Ag(THF) as the ligand transfer agent

Dimethylaluminum or ethylzinc complexes of highly fluorinated tris(pyrazolyl)borate ligand [HB(3,5-(CF(3))(2)Pz)(3)](-) can be obtained in excellent yield from the reaction between the silver adduct [HB(3,5-(CF(3))(2)Pz)(3)]Ag(THF) and the metal alkyl reagent Me(3)Al or Et(2)Zn. The X-ray crystal structure of [HB(3,5-(CF(3))(2)Pz)(3)]AlMe(2) shows that the tris(pyrazolyl)borate ligand coordinates to the aluminum center in kappa(2)-fashion. [HB(3,5-(CF(3))(2)Pz)(3)]ZnEt features the typical kappa(3)-bonded ligand.     

Supramolecular networks of silver(I) and iron(II) complexes of the third generation tris(pyrazolyl)methane ligand Ph(2)(O)POCH(2)C(pz)(3) (pz = pyrazolyl ring)

The new ligand Ph(2)(O)POCH(2)C(pz)(3) (pz = pyrazolyl ring), prepared from the reaction of HOCH(2)C(pz)(3) and Ph(2)P(O)Cl in the presence of base, reacts with either AgBF(4) or Fe(BF(4))(2).6H(2)O in a 2/1 molar ratio to yield {[Ph(2)(O)POCH(2)C(pz)(3)](2)Ag}(BF(4)) () and {[Ph(2)(O)POCH(2)C(pz)(3)](2)Fe}(BF(4))(2) (), respectively. In the structure of , the silver is in an unusual planar geometry with each of the ligands in a kappa(2)-kappa(0) coordination mode. Slow evaporation of a thf solution of yields crystalline [Ph(2)(O)POCH(2)C(pz)(3)Ag](2)(thf)(2)}(BF(4))(2) (). In each cationic unit of , the two Ph(2)(O)POCH(2)C(pz)(3) ligands coordinate to the same two silver(i) centers in a kappa(2)-kappa(1) bonding mode, with a silver atom separation of 3.36 A. The supramolecular structure of both and is dominated by a pair of cooperative hydrogen bonding interactions between the Ph(2)P(O) secondary tecton and a hydrogen atom from a methylene group situated on a neighboring building block, which arranges the cations in chains. The reaction of HC(pz)(3) and AgO(3)SCF(3) (AgOTf) yields {[HC(pz)(3)](2)Ag(2)}(OTf)(2) (). The cationic unit in has a structure very similar to that of , but with a much shorter distance between the silver atoms at 2.86 A. The supramolecular structure of is dominated by an unusual pyrazolyl embrace interaction where the acceptor ring in the C-Hpi interaction is the pyrazolyl ring kappa(1)-bonded to silver in the adjacent dimeric unit rather than the other ring in a kappa(2)-bonded Cpz(2) unit. This interaction arranges the cations in chains which are further organized into sheets by the triflate anions that link the chains via combined AgO/CHO interactions. The iron in is octahedral with each tris(pyrazolyl)methane unit in the kappa(3)-tripodal coordination mode. The supramolecular structure is sheets formed by hydrogen bonding between the Ph(2)P(O) oxygen and a meta-position hydrogen on one of the diphenylphosphine rings from an adjacent cation.     

Synthesis of a macrobicycle incorporating the tris(pyrazolyl)methane ligand

Steric crowding of the 3-position of tris(pyrazolyl)borate and -methane ligands has produced tetrahedral metal complexes with controlled reactivity. As an alternative, we propose to incorporate the tris(pyrazolyl)methane chelate in a macrobicyclic structure in order to create a cavity with well-defined dimensions and shape. Acid-catalyzed equilibration of excess of the new pyrazole 3-(1H-pyrazol-3-yl)benzenemethanethiol acetate with HC(3,5-Me(2)pz)(3) followed by hydrolysis affords a functionalized tris(pyrazolyl)methane, which reacts with 1,3,5-tris(bromomethyl)benzene in K(2)CO(3)/DMF to give the title compound. [structure: see text]     

Formation of third generation poly(pyrazolyl)borate ligands from alkyne coupling reactions of Fe[(p-IC6H4)B(3-Rpz)3]2 (R = H, Me; pz = pyrazolyl): pathways toward controlling an iron(II) electronic spin-state crossover

Sonogashira coupling reactions of terminal alkynes with Fe[(p-IC6H4)B(3-Mepz)3]2 (pz = pyrazolyl ring) yield Fe[(p-PhC2C6H4)B(3-Mepz)3]2 (2), Fe[(p-Me3SiC2C6H4)B(3-Rpz)3]2 (R = H, 3a, R = Me, 3b), and Fe[(p-HC2C6H4)B(3-Mepz)3]2 (R = H, 4a, R = Me, 4b), a series of new complexes containing "third generation" poly(pyrazolyl)borate ligands. Complex 2 undergoes a fairly gradual iron(II) electronic spin-state crossover with a 30 K hysteresis, whereas complex 3b is an unusual example of a complex with equivalent iron(II) sites in the high-spin form that shows an abrupt 50% spin crossover. For complex 4b, 50% of the iron(II) sites undergo a gradual spin-state transition between 185 and 350 K with an activation energy of 1590 +/- 30 cm(-1) and a T(1/2) = 280 K and, for the remaining iron(II) sites, an abrupt cooperative spin-state crossover between 106 and 114 K. The crystal structures of 4b obtained for each of the three distinct electronic spin states reveal two crystallographically different iron(II) sites, and analysis of the molecular/supramolecular structures indicates that the difference in the degree of pyrazolyl ring tilting in the ligands between the two sites, rather than the strength of the intermolecular forces, play a prominent role in determining the temperature of the spin-state crossover.     

A Six-Coordinate Tris(3,5-dimethyl-1-pyrazolyl)methane-Thallium(I) Complex with a Stereochemically Inactive Lone Pair: Syntheses and Solid State Structures of {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6) and {[HC(3,5-Me(2)pz)(3)]Tl}PF(6) (pz = Pyrazolyl)

The addition of the tris(pyrazolyl)methane ligand HC(3,5-Me(2)pz)(3) (pz = pyrazolyl ring) to a THF solution of TlPF(6) results in the immediate precipitation of {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6). The structure has been determined crystallographically. The arrangement of the nitrogen donor atoms about the thallium is best described as a trigonally distorted octahedron. The thallium atom sits on a crystallographic center of inversion; thus the planes formed by the three nitrogen donor atoms of each ligand are parallel. The Tl-N bond distances range from 2.891(5) to 2.929(5) ? (average = 2.92) ?. The lone pair on thallium is clearly stereochemically inactive and does not appear to influence the structure. The pyrazolyl rings are planar, but are tilted with respect to the thallium atom so as to open up the N.N intraligand bite distances. The thallium(I) complex with a ligand to metal ratio of 1/1, {[HC(3,5-Me(2)pz)(3)]Tl}PF(6), is prepared in acetone by the reaction of equimolar amounts of HC(3,5-Me(2)pz)(3) and TlPF(6). The structure of the cation is a trigonal pyramid, with Tl-N bond distances that range from 2.64(1) to 2.70(1) ? (average = 2.67) ?. Pyrazolyl ring tilting is also observed in this complex, but the degree of tilting is smaller. Crystal data for {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6): monoclinic, P2(1)/c, a = 9.210(6) ?, b = 13.36(1) ?, c = 16.067(8) ?, beta = 92.48(5) degrees, V = 1975(2) ?(3), Z = 2, R = 0.029. For {[HC(3,5-Me(2)pz)(3)]Tl}PF(6): monoclinic, P2(1)/n, a = 10.685(2) ?, b = 16.200(5) ?, c = 13.028(3) ?, beta = 94.02(2) degrees, V = 2249.6(8) ?(3), Z = 4, R = 0.042.     

Syntheses of Cationic, Six-Coordinate Cadmium(II) Complexes Containing Tris(pyrazolyl)methane Ligands. Influence of Charge on Cadmium-113 NMR Chemical Shifts

Treating a thf (thf = tetrahydrofuran) suspension of Cd(acac)(2) (acac = acetylacetonate) with 2 equiv of HBF(4).Et(2)O results in the immediate formation of [Cd(2)(thf)(5)](BF(4))(4) (1). Crystallization of this complex from thf/CH(2)Cl(2) yields [Cd(thf)(4)](BF(4))(2) (2), a complex characterized in the solid state by X-ray crystallography. Crystal data: monoclinic, P2(1)/n, a = 7.784(2) ?, b = 10.408(2) ?, c = 14.632(7) ?, beta = 94.64(3) degrees, V = 1181.5(6) ?(3), Z = 2, R = 0.0484. The geometry about the cadmium is octahedral with a square planar arrangement of the thf ligands and a fluorine from each (BF(4))(-) occupying the remaining two octahedral sites. Reactions of [Cd(2)(thf)(5)](BF(4))(4) with either HC(3,5-Me(2)pz)(3) or HC(3-Phpz)(3) yield the dicationic, homoleptic compounds {[HC(3,5-Me(2)pz)(3)](2)Cd}(BF(4))(2) (3) and {[HC(3-Phpz)(3)](2)Cd}(BF(4))(2) (4) (pz = 1-pyrazolyl). The solid state structure of 3 has been determined by X-ray crystallography. Crystal data: rhombohedral, R&thremacr;, a = 12.236(8) ?, c = 22.69(3) ?, V = 2924(4) ?(3), Z = 3, R = 0.0548. The cadmium is bonded to the six nitrogen donor atoms in a trigonally distorted octahedral arrangement. Four monocationic, mixed ligand tris(pyrazolyl)methane-tris(pyrazolyl)borate complexes {[HC(3,5-Me(2)pz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (5), {[HC(3,5-Me(2)pz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (6), {[HC(3-Phpz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (7), and {[HC(3-Phpz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (8) are prepared by appropriate conproportionation reactions of 3or 4 with equimolar amounts of the appropriate homoleptic neutral tris(pyrazolyl)borate complexes [HB(3,5-Me(2)pz)(3)](2)Cd or [HB(3-Phpz)(3)](2)Cd. Solution (113)Cd NMR studies on complexes 3-8 demonstrate that the chemical shifts of the new cationic, tris(pyrazolyl)methane complexes are very similar to the neutral tris(pyrazolyl)borate complexes that contain similar substitution of the pyrazolyl rings.     

Hydrotris(1,2,4‐triazolyl)borato Complexes with the Main Group Elements Ca,Sr, and Pb – Unexpectedly Bent ML2 Structures and a Stereochemically Inactive Lone Pair at Lead(II)

The coordination of the modified poly(azolyl)borato ligand hydrotris(1,2,4‐triazolyl)borato (L) with main group metals leads to complexes with coordination numbers of eight and the formula [CaL₂(H₂O)₂], [SrL₂(H₂O)₂], and [PbL₂(H₂O)₂]. The two L ligands coordinate in a “bent” arrangement to allow for the coordination of the two aqua ligands. This is in sharp contrast to six‐coordinated, pseudo‐octahedral CaTp₂ and PbTp₂ complexes [Tp = hydrotris(pyrazolyl)borato]. The calcium, strontium, and lead complexes are isostructural. No stereochemical lone pair activity is evident in [PbL₂(H₂O)₂]. Two additional water molecules of crystallization complete the crystal structure of [CaL₂(H₂O)₂] · 2 H₂O and [PbL₂(H₂O)₂] · 2 H₂O. In the synthesis of [PbL₂(H₂O)₂] an intermediate of the form [Pb(μ₃‐L)(NO₃)H₂O] could isolated and structurally characterized. There, the lead(II) center is seven coordinated with a presumably stereochemically active lone pair. Long M–L bonds argue for a more ionic bonding to the modified tris(triazolyl)borato ligand when compared to analogous M–Tp complexes.     

Bis(pyrazolyl)(thioimidazolyl)borate ligands: the missing member in the N3...S3 scorpionate series

The anionic bis(pyrazolyl)(thioimidazolyl)borate ligands BpMt(R) with R = tert-butyl and isopropyl were obtained as their potassium salts by reacting potassium tris(pyrazolyl)borate with the corresponding thioimidazoles in the melt at 150 degrees C. They were applied to form some tetrahedral zinc complexes and identified by the crystal structures of (BpMt(t-Bu))ZnCl and (BpMt(i-Pr))Zn-SC(6)H(4)-p-Cl.     

Potential Precursors for Terminal Methylidene Rare-Earth-Metal Complexes Supported by a Superbulky Tris(pyrazolyl)borato Ligand

A series of solvent-free heteroleptic terminal rare-earth-metal alkyl complexes stabilized by a superbulky tris(pyrazolyl)borato ligand with the general formula [Tp^tBu,MeLnMeR] have been synthesized and fully characterized. Treatment of the heterobimetallic mixed methyl/tetramethylaluminate compounds [Tp^tBu,MeLnMe(AlMe₄)] (Ln=Y, Lu) with two equivalents of the mild halogenido transfer reagents SiMe₃X (X=Cl, I) gave [Tp^tBu,MeLnX₂] in high yields. The addition of only one equivalent of SiMe₃Cl to [Tp^tBu,MeLuMe(AlMe₄)] selectively afforded the desired mixed methyl/chloride complex [Tp^tBu,MeLuMeCl]. Further reactivity studies of [Tp^tBu,MeLuMeCl] with LiR or KR (R=CH₂Ph, CH₂SiMe₃) through salt metathesis led to the monomeric mixed-alkyl derivatives [Tp^tBu,MeLuMe(CH₂SiMe₃)] and [Tp^tBu,MeLuMe(CH₂Ph)], respectively, in good yields. The SiMe₄ elimination protocols were also applicable when using SiMe₃X featuring more weakly coordinating moieties (here X=OTf, NTf₂). X-ray structure analyses of this diverse set of new [Tp^tBu,MeLnMeR/X] compounds were performed to reveal any electronic and steric effects of the varying monoanionic ligands R and X, including exact cone-angle calculations of the tridentate tris(pyrazolyl)borato ligand. Deeper insights into the reactivity of these potential precursors for terminal alkylidene rare-earth-metal complexes were gained through NMR spectroscopic studies.     

Structural analysis of the conformational flexibility of tris(pyrazolyl)borate ligands and their analogues

Database analysis and molecular mechanics were used to determine the conformational flexibility of tridentate scorpionate ligands. The tris(pyrazolyl)methane and tris(pyrazolyl)borate ligands act like molecular vises, opening their tripodal structure for larger metals and closing around smaller metal ions. Tris(3-tert-butylpyrazolyl)methane has significant preference for larger metal ions than its unsubstituted parent compound. Tris(pyrazolyl)methanes and tris(pyrazolyl)borates have similar conformational flexibilities. Placing sterically hindered groups on the central carbon or boron has only a minor effect on the geometry of the tris(pyrazolyl)methanes and tris(pyrazolyl)borates. However, it does influence the flexibility of the ligands, particularly when they have to open far from their ideal geometry, which commonly occurs.     

Functionalised Tris(pyrazolyl)methane Ligands and Re(CO)3 Complexes Thereof

The synthesis of new tripodal nitrogen ligands derived from tris(pyrazolyl)methane (Tpm^R, R = H, tBu, Ph in 3‐position) is described. After deprotonation of the parent tris(pyrazolyl)methane Tpm^R, the carbanion reacts readily with ethylene oxide to yield the 3,3,3‐tris(3′‐substituted pyrazolyl)propanol ligands[(3‐Rpz)₃CCH₂CH₂OH, R = H, tBu, Ph, 1a – c ]. These ligands can be easily derivatised at the alcohol function. Microwave‐assisted reactions of these ligands and [Re(CO)₅Br] yields the complex [( 1a )Re(CO)₃]Br ( 4 ) in the case of ligand 1a , whereas in the case of the substituted ligands 1b and 1c degradation was observed. The degradation products are identified as [(Hpz^R)₂Re(CO)₃Br] [R = tBu ( 7b ), Ph ( 7c )]. These complexes were also prepared directly from [Re(CO)₅Br] and the corresponding pyrazoles by microwave‐assisted synthesis. The Re(CO)₃ complexes 4 and [( 1a )Re(CO)₃]OTf ( 5 ) are water‐soluble. The structures of 5· H₂O and [{(pz)₃CCH₂CH₃}Re(CO)₃]OTf · 1.5H₂O · ¹/₂CH₃CN ( 6· 1.5H₂O · ¹/₂CH₃CN) as well as the structure of 7b have been elucidated by X‐ray crystallography.     

Zinc-thiolate complexes of the bis(pyrazolyl)(thioimidazolyl)hydroborate tripods for the modeling of thiolate alkylating enzymes

The new tripod ligands bis(pyrazolyl)(3-tert-butyl-2-thioimidazol-1-yl)hydroborate (L(1)) and bis(pyrazolyl)(3-isopropyl-2-thioimidazol-1-yl)hydroborate (L(2)), together with zinc nitrate or zinc chloride and the corresponding thiolates, have yielded a total of 17 zinc-thiolate complexes. These comprise aliphatic as well as aromatic thiolates and a cysteine derivative. Structure determinations have confirmed the tetrahedral ZnN(2)S(2) coordination in the complexes. Upon reaction with methyl iodide, the species L(1).Zn-SR are slowly converted to L(1).Zn-I and the free thioethers CH(3)SR. A kinetic analysis has shown these alkylations to be about 1 order of magnitude slower than those of the tris(pyrazolyl)borate complexes Tp(Ph,Me)Zn-SR. Alkylations with trimethyl phosphate were found to proceed very slowly even in DMSO at 80 degrees C.     

A convenient preparative method for anionic tris(substituted pyrazolyl)methane ligands

The synthesis of tris[3-(6-carboxypyridin-2-yl)pyrazol-1-yl]methane is described in a linear multi-step protocol. The pyridyl-pyrazolyl arms are first constructed before being condensed with chloroform. Careful study of the condensation reaction shows the presence of an isomeric form of the tris(pyrazolyl)methane derivative in which one of the pyrazolyl substituents is linked through the nitrogen atom at the 2 position of the pyrazol. After acid-catalysed isomerisation to the desired isomer, the intermediate compound was subjected to a carboalkoxylation reaction and a subsequent hydrolysis. These are some rare examples of reactions directly occurring on the tris(pyrazolyl)methane platforms.     

A practical synthesis of tris(pyrazolyl)methylaryls

The preparation of three tris(pyrazolyl)toluidines from trifluoromethylaniline reagents is described that likely takes advantage of (quinoidal) resonance-stabilized activation of the C-F bonds. Subsequent transformations lead to two additional (for a total of five new) tris(pyrazolyl)methylaryls. This simple reaction is remarkable because only one other tris(pyrazolyl)methylaryl has been reported previously, because it is usually very difficult to activate fluoroalkane C-F bonds, and because of the potential scope of the reaction.