Factors affecting the electrochemical and spectroelectrochemical properties of diruthenium(III,II) complexes containing four identical unsymmetrical bridging ligands

Factors affecting the electrochemical and spectroelectrochemical properties of diruthenium(III,II) complexes containing four unsymmetrical bridging ligands are reported for seven related compounds which were isolated in one or two of the four possible isomeric forms. The investigated compounds are represented as Ru(2)(2-CH(3)ap)(4)Cl, Ru(2)(2,5-F(2)ap)(4)Cl, Ru(2)(2,6-F(2)ap)(4)Cl, and Ru(2)(2,4,6-F(3)ap)(4)Cl where 2-CH(3)ap, 2,5-F(2)ap, 2,6-F(2)ap, and 2,4,6-F(3)ap are, respectively, the 2-(2-methylanilino)pyridinate anion, the 2-(2,5-difluoroanilino)pyridinate anion, the 2-(2,6-difluoroanilino)pyridinate anion, and the 2-(2,4,6-trifluoroanilino)pyridinate anion. Ru(2)(2-CH(3)ap)(4)Cl and Ru(2)(2,5-F(2)ap)(4)Cl exist only in a (4,0) conformation while Ru(2)(2,4,6-F(3)ap)(4)Cl is present in both (3,1) and (4,0) isomeric forms. Ru(2)(2,6-F(2)ap)(4)Cl also exists in two isomeric forms, but only the (3,1) isomer was generated in sufficient quantities to be isolated and structurally characterized. This series of seven closely related metal-metal bonded complexes thus provides the first possibility to systematically examine how differences in position and number of the electron-donating or electron-withdrawing groups on the anionic bridging ligands might be related to the electronic properties and structural features of the compound as well as the type and number of geometric isomers which are formed. Each diruthenium derivative undergoes three one-electron transfers in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate (TBAP). The first reduction and first oxidation products were characterized by thin-layer UV-vis spectroelectrochemistry, and the spectroscopic data, along with E(1/2) values, were then related via linear free energy relationships to the type of isomer and/or position of the electron-donating or electron-withdrawing substituents on the anionic ap bridge. The electrogenerated Ru(2)(6+) and Ru(2)(4+) forms of the compounds were assigned on the basis of electrochemical and UV-vis spectroscopic data as having the electronic configuration sigma(2)pi(4)delta(2)pi(2) and sigma(2)pi(4)delta(2)pi(3)delta, respectively, and seemed to be independent of the isomer type ((3,1) or (4,0)). The spectral and electrochemical properties of the compounds both vary substantially as a function of the isomer type, but this is not reflected in the structural features of the compounds which are within the range of what is seen for other Ru(2)(5+) species described in the literature. The Ru-Ru bond lengths of the four structurally characterized (4,0) isomers of the ap complexes range from 2.275 to 2.296 A while those of the three structurally characterized (3,1) isomers of ap derivatives fall in the range 2.284-2.286 A and show no significant difference among the three compounds. The Ru-Cl bond lengths of the (3,1) isomers do not vary significantly with the bridging ligand and range from 2.458 to 2.471 A whereas those of the (4,0) isomers range from 2.437 to 2.487 A and show larger variations among the compounds. The Ru-Ru-Cl bond angle is virtually independent of the bridging ligand in the case of the (4,0) isomers but decreases with the electron-withdrawing effect of the substituent in the case of the (3,1) isomers.     

Synthesis, structural, spectroscopic, and electrochemical characterization of high oxidation state diruthenium complexes containing four identical unsymmetrical bridging ligands

Six Ru2(6+) derivatives of the form Ru2(L)4(C[triple bond]CC6H5)(2), where L = 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, or 2,4,6-F(3)ap, are synthesized and characterized as to their electrochemical, spectroscopic, and/or structural properties. These compounds are synthesized from a reaction between LiC[triple bond]CC6H5 and Ru2(L)4Cl. Two of the investigated complexes exist in a (4,0) isomeric form while four adopt a (3,1) geometric conformation. These two series of geometric isomers are compared with previously characterized (4,0) Ru2(ap)4(C[triple bond]CC6H5)(2), (4,0) Ru2(F5ap)4(C[triple bond]CC6H5)(2), and (3,1) Ru2(F5ap)4(C[triple bond]CC6H5)(2). The overall data on the nine compounds thus provide an opportunity to systematically examine how the electrochemical and structural properties of these Ru2(6+) complexes vary with respect to isomer type and electronic properties of the bridging ligands.     

Electrochemical and spectroelectrochemical characterization of Ru(2)(4+) and Ru(2)(3+) complexes under a CO atmosphere

Eleven different Ru(2)(4+) and Ru(2)(3+) derivatives are characterized by thin-layer FTIR and UV-visible spectroelectrochemistry under a CO atmosphere. These compounds, which were in-situ electrogenerated from substituted anilinopyridine complexes with a Ru(2)(5+) core, are represented as Ru(2)(L)(4)Cl where L = 2-CH(3)ap, ap, 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, 3,5-F(2)ap, 2,4,6-F(3)ap, or F(5)ap. The Ru(2)(5+) complexes do not axially bind CO while mono- and bis-CO axial adducts are formed for the Ru(2)(4+) and Ru(2)(3+) derivatives, respectively. Six of the eleven investigated compounds exist in a (4,0) isomeric form while five adopt a (3,1) geometric conformation. These two series of compounds thus provide a large enough number of derivatives to examine trends and differences in the spectroscopic data of the two types of isomers in their lower Ru(2)(4+) and Ru(2)(3+) oxidation states. UV-visible spectra of the Ru(2)(4+) derivatives and IR spectra of the Ru(2)(3+) complexes under CO are both isomer dependent, thus suggesting that these data can be used to reliably predict the isomeric form, i.e., (3,1) or (4,0), of diruthenium complexes containing four unsymmetrical substituted anilinopyridinate bridging ligands; this was confirmed by X-ray crystallographic data for seven compounds whose structures were available.     

Cyanide adducts on the diruthenium core of [Ru2(L)4](+) (L = ap, CH3ap, Fap, or F3ap). Electronic properties and binding modes of the bridging ligand

The products of the reaction between CN(-) and four different diruthenium complexes of the type Ru(2)(L)(4)Cl where L = 2-CH(3)ap (2-(2-methylanilino)pyridinate anion), ap (2-anilinopyridinate anion), 2-Fap (2-(2-fluoroanilino)pyridinate anion), or 2,4,6-F(3)ap (2-(2,4,6-trifluoroanilino)pyridinate anion) are reported. Mono- and/or dicyano adducts of the type Ru(2)(L)(4)(CN) and Ru(2)(L)(4)(CN)(2) are found exclusively as reaction products when either the 2-CH(3)ap or the ap derivative is reacted with CN(-), but diruthenium complexes with formulations of the type Ru(2)(F(x)ap)(3)[mu-(o-NC)F(x-1)ap](mu-CN) or Ru(2)(F(x)ap)(4)(mu-CN)(2) (x = 1 or 3) are also generated when Ru(2)(Fap)(4)Cl or Ru(2)(F(3)ap)(4)Cl is reacted with CN(-). More specifically, four products formulated as Ru(2)(Fap)(4)(CN), Ru(2)(Fap)(4)(CN)(2), Ru(2)(Fap)(3)[mu-(o-NC)ap](mu-CN), and Ru(2)(Fap)(4)(mu-CN)(2) can be isolated from a reaction of CN(-) with the Fap derivative, but the exact type and yield of these compounds depend on the temperature at which the experiment is carried out. In the case of the F(3)ap derivative, the only diruthenium complex isolated from the reaction mixture has the formulation Ru(2)(F(3)ap)(3)[mu-(o-NC)F(2)ap](mu-CN) and this compound has structural, electrochemical, and spectroscopic properties quite similar to that of previously characterized Ru(2)(F(5)ap)[mu-(o-NC)F(4)ap](mu-CN). Both the mono- and dicyano derivatives synthesized in this study possess the isomer type of their parent chloro complexes. The Ru-Ru bond lengths of Ru(2)(ap)(4)(CN) and Ru(2)(2-CH(3)ap)(4)(CN) are longer than those of Ru(2)(ap)(4)Cl and Ru(2)(CH(3)ap)(4)Cl, respectively, and this is accounted for by the strong sigma-donor properties of the CN(-) ligand as compared to Cl(-). The Ru-C bonds in Ru(2)(ap)(4)(CN)(2) are significantly shorter than those in Ru(2)(ap)(4)(CN), thus revealing a greatly enhanced Ru-CN interaction in the dicyano adduct, a result which is also indicated by the fact that nu(CN) in Ru(2)(ap)(4)(CN)(2) is 50 cm(-1) higher than nu(CN) in Ru(2)(ap)(4)(CN). Although both (4,0) Ru(2)(ap)(4)(CN)(2) and (3,1) Ru(2)(Fap)(4)(CN)(2) possess the same formulation, there are clear structural differences between the two complexes and this can be explained by the fact that the two cyano derivatives possess a different binding symmetry of the bridging ligands. Each mono- and dicyano adduct was electrochemically investigated in CH(2)Cl(2) containing TBAP as supporting electrolyte. Ru(2)(ap)(4)(CN), Ru(2)(CH(3)ap)(4)(CN), and Ru(2)(Fap)(4)(CN) undergo one reduction and two oxidations. The two dicyano adducts of the ap and Fap derivatives are characterized by two reductions and one oxidation. The potentials of these processes are all negatively shifted in potential by 400-720 mV with respect to half-wave potentials for the same redox couples of the monocyano derivatives, with the exact value depending upon the specific redox reaction.     

Solvent effects on the electrochemistry and spectroelectrochemistry of diruthenium complexes. Studies of Ru2(L)4Cl where L=2-CH3ap, 2-Fap, and 2,4,6-F3ap, and ap is the 2-anilinopyridinate anion

Three Ru2(5+) diruthenium complexes, (4,0) Ru2(2-CH3ap)4Cl, (3,1) Ru2(2-Fap)4Cl, and (3,1) Ru2(2,4,6-F3ap)4Cl where ap is the 2-anilinopyridinate anion, were examined as to their electrochemical and spectroelectrochemical properties in five different nonaqueous solvents (CH2Cl2, THF, PhCN, DMF, and DMSO). Each compound undergoes a single one-electron metal-centered oxidation in THF, DMF, and DMSO and two one-electron metal-centered oxidations in CH2Cl2 and PhCN. The three diruthenium complexes also undergo two reductions in each solvent except for CH2Cl2, and these electrode processes are assigned as Ru2(5+/4+) and Ru2(4+/3+). Each neutral, singly reduced, and singly oxidized species was characterized by UV-vis thin-layer spectroelectrochemistry, and the data are discussed in terms of the most probable electronic configuration of the compound in solution. The three neutral complexes contain three unpaired electrons as indicated by magnetic susceptibility measurements using the Evans method (3.91-3.95 muB), and the electronic configuration is assigned as sigma2pi4delta2pi(*2)delta, independent of the solvent. The three singly oxidized compounds have two unpaired electrons in CD2Cl2, DMSO-d6, or CD3CN (2.65-3.03 muB), and the electronic configuration is here assigned as sigma2pi4delta2pi(*2). The singly reduced compound also has two unpaired electrons (2.70-2.80 muB) in all three solvents, consistent with the electronic configuration sigma2pi4delta2pi(*2)delta(*2) or sigma2pi4delta2pi(*3)delta*. Finally, the overall effect of solvent on the number of observed redox processes is discussed in terms of solvent binding, and several formation constants were calculated.     

Synthesis and characterization of (3,1) Ru2(F3ap)4(NCS) and (3,1) Ru2(F3ap)3(F2Oap)(NCS) where F3ap is the 2-(2,4,6-trifluoroanilino)pyridinate anion

Two isothiocyanate diruthenium complexes, (3,1) Ru2(F3ap)4(NCS) 1 and (3,1) Ru2(F3ap)3(F2Oap)(NCS)2 (where F3ap=2,4,6-trifluoroanilinopyridinate anion), were synthesized from (3,1) Ru2(F3ap)4Cl and SCN(-) under different experimental conditions. Each compound was examined as to its structural, electrochemical, spectroscopic, and magnetic properties. Compound 1 contains three unpaired electrons as its parent compound but 2 is diamagnetic. The X-ray molecular structures of 1 and 2 reveal that the NCS group is coordinated to the dimetal unit via nitrogen in both compounds with the Ru-N-C bond angle being 176.5 degrees for 1 and 166.0 degrees for 2. An elongation of the Ru-Ru bond distance and a shortening of both the Ru-Np (p=pyridyl) and the Ru-Na (a=anilino) bond lengths is seen upon going from (3,1) Ru2(F3ap)4Cl to 2, but the conversion of (3,1) Ru2(F3ap)4Cl to 1 does not affect significantly structural features of the Ru2(L) 4 framework. Compound 1 undergoes one reduction and two oxidations, all three of which involve the dimetal core, whereas 2 undergoes two metal-centered reductions, one metal-centered oxidation, and one ligand-based oxidation due to the presence of the F2Oap ligand on the Ru2 complex. The reactivity of 1 with SCN(-) was also investigated.     

Synthesis, characterization, and electrochemistry of diruthenium(III,II) and monoruthenium(III) complexes containing pyridyl-substituted 2-anilinopyridinate ligands

Reaction of the metal-metal bonded complex Ru(2)(O2CCH3)4Cl with 2-anilino-4-methylpyridine leads to the (3,1) isomer of the diruthenium(III,II) complex Ru2(ap-4-Me)4Cl, 1 while the same reaction with 2-anilino-6-methylpyridine gives the monoruthenium(III) derivative Ru(ap-6-Me)3, 2. Both compounds were examined as to their structural, electrochemical, and UV-visible properties, and the data were then compared to that previously reported for (4,0) Ru2(2-Meap)4Cl and other (3,1) isomers of Ru2(L)4Cl with similar anionic bridging ligands. ESR spectroscopy indicates that the monoruthenium derivative 2 contains low-spin Ru(III), and the presence of a single ruthenium atom is confirmed by an X-ray structure of the compound. The combined electrochemical and UV-vis spectroelectrochemical data indicate that the diruthenium complex 1 is easily converted to its Ru2(4+) and Ru2(6+) forms upon reduction or oxidation by one electron while the monoruthenium derivative 2 also undergoes metal-centered redox processes to give Ru(II) and Ru(IV) complexes under the same solution conditions. The reactivity of 1 with CO and CN- was also examined.     

Synthesis and structural variations of substituted phenylamide complexes of the heavy alkaline earth metals calcium, strontium and barium

Starting material KN(H)C(6)H(3)-2,6-F(2) was prepared via a transamination reaction from KNH(2) and 2,6-F(2)C(6)H(3)NH(2) in THF and crystallized from 1,4-dioxane (diox) as the three-dimensional polymer [(diox)(1.5)K{N(H)-2,6-F(2)C(6)H(3)}.diox(0.5)](infinity) (1). The metathesis reaction of (THF)(4)CaI(2) with KN(Me)Ph in THF yields monomeric (THF)(4)Ca[N(Me)Ph](2) (2) with a nearly linear N-Ca-N moiety of 179.84(8) degrees . The metathesis reaction of (THF)(4)CaI(2) with KN(H)Mes yields trinuclear (THF)(6)Ca(3)[N(H)Mes](6) (3) with a linear Ca(3) fragment and bridging 2,4,6-trimethylphenylamido groups. The reaction of 1 with (THF)(4)CaI(2) gives dinuclear (THF)(5)Ca(2)[N(H)-2,6-F(2)C(6)H(3)](4).2THF (4) with three bridging and one terminally bound 2,6-difluorophenylamide. A similar reaction of (THF)(5)SrI(2) with KN(H)-2,6-F(2)C(6)H(3) yields dinuclear (THF)(6)Sr(2)[N(H)-2,6-F(2)C(6)H(3)](3)I.THF (5) in which the iodide anion binds terminally. This iodide ligand cannot be substituted as easily by excess KN(H)-2,6-F(2)C(6)H(3). The metathesis reaction of (THF)(5)BaI(2) with KN(H)-2,6-F(2)C(6)H(3) leads to the formation of [(THF)(2)Ba{N(H)-2,6-F(2)C(6)H(3)}(2)](infinity) (6) which crystallizes as a one-dimensional polymer with bridging 2,6-difluorophenylamide anions and additional Ba-F-bonds.     

Synthesis, electrochemistry, and spectroscopic characterization of bis-dirhodium complexes linked by axial ligands

The synthesis and electrochemical and spectroscopic properties of bis-dirhodium complexes containing ap or dpf bridging ligands, (ap)(4)Rh(2)(C triple bond C)(2)Rh(2)(ap)(4) (2) and (dpf)(4)Rh(2)(CNC(6)H(4)NC)Rh(2)(dpf)(4) (4), were investigated (where ap and dpf are the 2-anilinopyridinate and N,N'-diphenylformamidinate ions, respectively). The related "simple" dirhodium species, (ap)(4)Rh(2)(C triple bond C)(2)Si(CH(3))(3) (1) and (dpf)(4)Rh(2)(CNC(6)H(5)) (3), with the same set of bridging ligands were also synthesized and their properties compared to those of the analogous bis-dirhodium complexes. Compound 1 was obtained by mixing (ap)(4)Rh(2)Cl and Li(C triple bond C)(2)Si(CH(3))(3) in refluxing THF for 16 h under vacuum while compound 2 was prepared by a reaction between (ap)(4)Rh(2)(C triple bond C)(2)Li and (ap)(4)Rh(2)Cl under similar conditions. The reaction between (CF(3)COO)(4)Rh(2) and molten Hdpf under vacuum for 24 h leads to the generation of compound 3 with a yield of 65%. The red-orange compound 4 was obtained upon addition of 0.5 equiv of CNC(6)H(4)NC at room temperature to a CH(2)Cl(2) solution containing (dpf)(4)Rh(2) which was synthesized according to a method described previously in the literature. Compound 1 crystallizes in the triclinic space group P1, with a = 10.164(3) A, b = 13.881(3) A, c = 18.805(4) A, alpha = 73.55(2) degrees, beta = 77.89(2) degrees, gamma = 84.85(2) degrees, and Z = 2. Crystals of 2 were not good enough to collect adequate data for X-ray analysis, but the identity of this compound was confirmed, along with its P1; space group. Crystals of 3 and 4 belong to the monoclinic, P2(1)/c space group and the triclinic, P1; space group, respectively, with a = 13.5254(5) A, b = 13.7387(4) A, c = 27.2011(12) A, beta = 102.637(2) degrees, and Z = 4 for 3 and a = 13.866(8) A, b = 14.756(7) A, c = 15.008(6) A, alpha = 79.91(3) degrees, beta = 87.72(4) degrees, gamma = 89.19(4) degrees, and Z = 1 for 4. Compound 1 exhibits a single reversible oxidation at E(1/2) = 0.66 V and a single reversible reduction at E(1/2) = -0.44 V vs SCE in THF, 0.2 M TBAP. Both processes involve a one-electron transfer. Compound 2 undergoes a reversible oxidation at E(1/2) = 0.60 V and two separate one-electron-transfer reductions at E(1/2) = -0.52 and -0.65 V in THF, 0.2 M TBAP. The oxidation involves two overlapped one-electron-transfer processes. Compounds 3 and 4 undergo two reversible oxidations in CH(2)Cl(2), 0.1 M TBAP located at E(1/2) = 0.23 and 1.22 V (3) or 0.22 and 1.20 V (4). Each redox reaction of 3 involves a one-electron-transfer step while each redox reaction of 4 involves two overlapping one-electron transfers. Compound 2 shows interaction between the two dirhodium cores upon reduction, while 4 gives no evidence of electronic interaction between the two dirhodium units during either reduction or oxidation. An ESR signal with axial symmetry was obtained for the neutral compounds 1 and 2, and a similar spectrum was obtained for the singly oxidized products of compounds 3 and 4, thus suggesting the electronic configuration of (sigma)(2)(pi)(4)(delta)(2)(pi)(4)(delta)(1) for the neutral compounds 1 and 2 as well as for the oxidized compounds 3 and 4. The four compounds were also characterized by FTIR and UV-visible spectroscopy as well as by mass spectrometry.     

Synthesis, structures and photophysical properties of luminescent copper(I) and platinum(II) complexes with a flexible naphthyridine-phosphine ligand

Condensation of Ph(2)PH and paraformaldehyde with 2-amino-7-methyl-1,8-naphthyridine gave the new flexible tridentate ligand 2-[N-(diphenylphosphino)methyl]amino-7-methyl-1,8-naphthyridine (L). Reaction of L with [Cu(CH(3)CN)(4)]BF(4) and/or different ancillary ligands in dichloromethane afforded N,P chelating or bridging luminescent complexes [(L)(2)Cu(2)](BF(4))(2), [(micro-L)(2)Cu(2)(PPh(3))(2)](BF(4))(2) and [(L)Cu(CNN)]BF(4) (CNN = 6-phenyl-2,2'-bipyridine), respectively. Complexes [(L)(2)Pt]Cl(2), [(L)(2)Pt](ClO(4))(2) and [(L)Pt(CNC)]Cl (CNC = 2,6-biphenylpyridine) were obtained from the reactions of Pt(SMe(2))(2)Cl(2) or (CNC)Pt(DMSO)Cl with L. The crystal structures and photophysical properties of the complexes are presented.     

Tuning of the ionization potential of paddlewheel diruthenium(II, II) complexes with fluorine atoms on the benzoate ligands

A series of paddlewheel diruthenium(ii, ii) complexes with various fluorine-substituted benzoate ligands were isolated as THF adducts and structurally characterized: [Ru(2)(F(x)PhCO(2))(4)(THF)(2)] (F(x)PhCO(2)(-) = o-fluorobenzoate, o-F; m-fluorobenzoate, m-F; p-fluorobenzoate, p-F; 2,6-difluorobenzoate, 2,6-F(2); 3,4-difluorobenzoate, 3,4-F(2); 3,5-difluorobenzoate, 3,5-F(2); 2,3,4-trifluorobenzoate, 2,3,4-F(3); 2,3,6-trifluorobenzoate, 2,3,6-F(3); 2,4,5-trifluorobenzoate, 2,4,5-F(3); 2,4,6-trifluorobenzoate, 2,4,6-F(3); 3,4,5-trifluorobenzoate, 3,4,5-F(3); 2,3,4,5-tetrafluorobenzoate, 2,3,4,5-F(4); 2,3,5,6-tetrafluorobenzoate, 2,3,5,6-F(4); pentafluorobenzoate, F(5)). By adding fluorine atoms on the benzoate ligands, it was possible to tune the redox potential (E(1/2)) for [Ru(2)(II,II)]/[Ru(2)(II,III)](+) over a wide range of potentials from -40 mV to 350 mV (vs. Ag/Ag(+) in THF). 2,3,6-F(3), 2,3,4,5-F(4), 2,3,5,6-F(4) and F(5) were relatively air-stable compounds even though they are [Ru(2)(II,II)] species. The redox potential in THF was dependent on an electronic effect rather than on a structural (steric) effect of the o-F atoms, although more than one substituent in the m- and p-positions shifted E(1/2) to higher potentials in relation to the general Hammett equation. A quasi-Hammett parameter for an o-F atom (σ(o)) was estimated to be ～0.2, and a plot of E(1/2)vs. a sum of Hammett parameters including σ(o) was linear. In addition, the HOMO energy levels, which was calculated based on atomic coordinates of solid-state structures, as well as the redox potential were affected by adding F atoms. Nevertheless, a steric contribution stabilizing their static structures in the solid state was present in addition to the electronic effect. On the basis of the electronic effect, the redox potential of these complexes is correlated to the HOMO energy level, and the electronic effect of F atoms is the main factor controlling the ionization potential of the complexes with ligands free from the rotational constraint, i.e. complexes in solution.     

Diosmium(III) compounds supported by 2-anilinopyridinate and novel alkynyl derivatives

The reaction between Os(2)(OAc)(4)Cl(2) and Hap (Hap is 2-anilinopyridine) under prolonged refluxing conditions resulted in an Os(III)(2) compound, Os(2)(ap)(4)Cl(2) (1), that can be crystallized as either the cis-(2,2) isomer from a CH(3)OH-CH(2)Cl(2) solution or the (3,1) isomer from a hexanes-CH(2)Cl(2) solution. Compound 1 undergoes facile reactions with LiC(2)Y to yield a series of Os(2)(ap)(4)(C(2)Y)(2) compounds with Y as Ph (2), ferrocenyl (3), SiMe(3) (4), and C(2)SiMe(3) (5). X-ray diffraction study of compound 2 reveals solvent-dependent isomerism similar to that of the parent compound 1. Compound 1 has Os-Os distances of 2.3937(8) and 2.3913(8) Angstroms for the cis-(2,2) and (3,1) isomers, respectively, and is paramagnetic (S = 1). Both the ethynyl derivatives 2-4 and butadiynyl derivative 5 are diamagnetic and have Os-Os distances of 2.456(1), 2.471(1), and 2.481(1) Angstroms for the cis-(2,2) and (3,1) isomers of 2 and (3,1) isomer of 4, respectively. Compounds 1-5 exhibit multiple one-electron redox couples in their cyclic voltammograms, including a reversible Os(2)(8+/7+) couple for 2. Resonance Raman spectra of both compounds 1 and 2 are reported.     

双氮桥式配体双核铑(d7—d7)络合物与氯代烃光化学氧化反应的研究

本文首次报导了双氮桥式配体双铑(d~-—d~7)络合物Rh_2L_4在可见光辐照下与氯代烃发生光化学反应。四种络合物的量子产率皆具有波长依赖性并与溶剂和轴向配体的性质有关。光化学反应产物经快速原子质谱和闪光光解法鉴定。另外, 将光化学反应产物和电解产物进行了ESR和循环伏安法的对比测定。结果表明, 标题络合物与氯代烃发生不可逆的一电子光诱导转移反应, 生成Rh_2L_4Cl。     

Platinum-rhodium carbonyl clusters: new structures and new types of dynamical activity

The reaction of Rh(4)(CO)(12) with Pt(PBu(t)(3))(2) in CH(2)Cl(2) at room temperature yielded three new complexes: Rh(4)(CO)(4)-(mu-CO)(4)(mu(4)-CO)(PBu(t)(3))(2)[Pt(PBu(t)(3))], 10, Rh(2)(CO)(8)[Pt(PBu(t)(3))](2)[Pt(CO)], 11, and Rh(2)(CO)(8)[Pt(PBu(t)(3))](3), 12. The reaction of Rh(4)(CO)(12) with an excess of Pt(PBu(t)(3))(2) in hexane at 68 degrees C yielded the new hexarhodium-tetraplatinum compound, Rh(6)(CO)(16)[Pt(PBu(t)(3))](4), 13, in a low yield. All four compounds were characterized by (31)P NMR and single-crystal X-ray diffraction analyses. Compound 10 contains an unsymmetrical quadruply bridging carbonyl ligand in the fold of a butterfly tetrahedral cluster of four rhodium atoms with a Pt(PBu(t)(3)) group bridging the hinge of the butterfly tetrahedron. Compound 11 contains an unsaturated trigonal bipyramidal Rh(2)Pt(3) cluster. Compound 12 is similar to 11 except the trigonal bipyramidal Rh(2)Pt(3) cluster opened by cleavage of one Pt-Rh bond due to steric interactions produced by the replacement of one of the carbonyl ligands in 11 with a tri-tert-butylphosphine ligand. Compound 12 undergoes facile dynamical rearrangements of the metal atoms in the cluster which average the three inequivalent phosphine ligands on the platinum atoms. Compound 13 contains an octahedral cluster of six rhodium atoms with four Pt(PBu(t)(3)) groups bridging edges of that octahedron.     

Ruthenium(II) polypyridyl complexes: potential precursors, metalloligands, and topo II inhibitors

Neutral and cationic mononuclear complexes containing both group 15 and polypyridyl ligands [Ru(kappa3-tptz)(PPh3)Cl2] [1; tptz=2,4,6-tris(2-pyridyl)-1,3,5-triazine], [Ru(kappa3-tptz)(kappa2-dppm)Cl]BF4 [2; dppm=bis(diphenylphosphino)methane], [Ru(kappa3-tptz)(PPh3)(pa)]Cl (3; pa=phenylalanine), [Ru(kappa3-tptz)(PPh3)(dtc)]Cl (4; dtc=diethyldithiocarbamate), [Ru(kappa3-tptz)(PPh3)(SCN)2] (5) and [Ru(kappa3-tptz)(PPh3)(N3)2] (6) have been synthesized. Complex 1 has been used as a metalloligand in the synthesis of homo- and heterodinuclear complexes [Cl2(PPh3)Ru(micro-tptz)Ru(eta6-C6H6)Cl]BF4 (7), [Cl2(PPh3)Ru(mu-tptz)Ru(eta6-C10H14)Cl]PF6 (8), and [Cl2(PPh3)Ru(micro-tptz)Rh(eta5-C5Me5)Cl]BF4 (9). Complexes 7-9 present examples of homo- and heterodinuclear complexes in which a typical organometallic moiety [(eta6-C6H6)RuCl]+, [(eta6-C10H14)RuCl]+, or [(eta5-C5Me5)RhCl]+ is bonded to a ruthenium(II) polypyridine moiety. The complexes have been fully characterized by elemental analyses, fast-atom-bombardment mass spectroscopy, NMR (1H and 31P), and electronic spectral studies. Molecular structures of 1-3, 8, and 9 have been determined by single-crystal X-ray diffraction analyses. Complex 1 functions as a good precursor in the synthesis of other ruthenium(II) complexes and as a metalloligand. All of the complexes under study exhibit inhibitory effects on the Topoisomerase II-DNA activity of filarial parasite Setaria cervi and beta-hematin/hemozoin formation in the presence of Plasmodium yoelii lysate.     

Intramolecular hydrogen bonding controls 1,3-N,S- vs. 1,5-S,S'-coordination in Ni(II) complexes of N-thiophosphorylated thioureas RNHC(S)NHP(S)(OiPr)2

Reaction of the deprotonated N-thiophosphorylated thioureas RNHC(S)NHP(S)(OiPr)(2) (R = Ph, HL(I); 2-MeC(6)H(4)-, HL(II); 2,6-Me(2)C(6)H(3)-, HL(III); 2,4,6-Me(3)C(6)H(2)-, HL(IV); Me-, HL(V)) with Ni(II) leads to complexes of the formula [NiL(I-V)(2)]. The molecular structures of the thioureas HL(II-V) and the complexes [NiL(II-V)(2)] in the solid were elucidated by single-crystal X-ray diffraction analysis. In the complexes, the metal is found to be in a square planar trans-N(2)S(2) ([NiL(II-IV)(2)]) environment formed by the C=S sulfur atoms and the P-N nitrogen atoms, or in a square planar trans-S(2)S'(2) ([NiL(V)(2)]) environment formed by the C=S and P=S sulfur atoms of two deprotonated ligands. DFT calculations confirmed that the [Ni(L(II-IV)-N,S)(2)] isomers are more stable (by 16-21 kcal mol(-1)) than the corresponding [Ni(L(II-IV)-S,S')(2)] conformers. The main reason for higher stability of the 1,3-N,S vs. 1,5-S,S' isomers is the formation of intramolecular N-H···S=P hydrogen bonds. In solution the complexes [Ni(L(II-V)-N,S)(2)] have an exclusive 1,3-N,S coordination, while the compound [Ni(L(I)-N,S)(2)] exhibits two isomers in the (1)H and (31)P NMR spectra. The major species is assigned to the 1,3-N,S coordinated isomer, while the minor (～25%) signals are due to the 1,5-S,S' isomer. UV-Vis spectroscopic results are in line with this. The electrochemical measurements reveal reversible one-electron reduction and irreversible oxidations, both assigned to ligand-centred processes.     

Synthesis, characterization, and reactivity of rhodium(I) acetylacetonato complexes containing pyridinecarboxaldimine ligands

Addition of o-C 6H 4NCHNAr to Rh(coe) 2(acac) (coe = cis-cyclooctene, acac = acetylacetonato) gave several new iminopyridine rhodium(I) complexes of the type Rh(acac)(kappa (2)- o-C 6H 4 NCH NAr) ( 1a Ar = 4-C 6H 4-OMe; 1b Ar = 2,6-C 6H 3-Me 2; 1c Ar = 2,6-C 6H 3-Et 2; 1d Ar = 2,6-C 6H 3- i-Pr 2). All new rhodium complexes have been characterized by a number of physical methods, including multinuclear NMR spectroscopy and X-ray diffraction studies for 1b and 1c. Addition of CHCl 3 to 1a afforded the corresponding rhodium(III) complex trans-Rh(kappa (2)- o-C 6H 4 NCH NAr)(CHCl 2)(Cl)(acac) ( 2). Addition of B 2cat 3 (cat = 1,2-O 2C 6H 4) to 1 gave zwitterionic Rh(eta (6)-catBcat)(kappa (2)- o-C 6H 4 NCH NAr) ( 3). The molecular structure of 3b has been confirmed by a single crystal X-ray diffraction study and shows that the N 2Rh fragment is bound to the catBcat anion via one of the catecholato groups in a eta (6)-fashion. These complexes have also been examined for their ability to catalyze the hydroboration of a series of vinylarenes. Reactions using catecholborane and pinacolborane seem to proceed largely through a dehydrogenative borylation mechanism to give a number of boronated products.     

Oxygen reduction reactions of monometallic rhodium hydride complexes

Selective reduction of oxygen is mediated by a series of monometallic rhodium(III) hydride complexes. Oxidative addition of HCl to trans-Rh(I)Cl(L)(PEt(3))(2) (1a, L = CO; 1b, L = 2,6-dimethylphenylisocyanide (CNXy); 1c, L = 1-adamantylisocyanide (CNAd)) produces the corresponding Rh(III) hydride complex cis-trans-Rh(III)Cl(2)H(L)(PEt(3))(2) (2a-c). The measured equilibrium constants for the HCl-addition reactions show a pronounced dependence on the identity of the "L" ligand. The hydride complexes effect the reduction of O(2) to water in the presence of HCl, generating trans-Rh(III)Cl(3)(L)(PEt(3))(2) (3a-c) as the metal-containing product. In the case of 2a, smooth conversion to 3a proceeds without spectroscopic evidence for an intermediate species. For 2b/c, an aqua intermediate, cis-trans-[Rh(III)(OH(2))Cl(2)(L)(PEt(3))(2)]Cl (5b/c), forms along the pathway to producing 3b/c as the final products. The aqua complexes were independently prepared by treating peroxo complexes trans-Rh(III)Cl(L)(η(2)-O(2))(PEt(3))(2) (4b/c) with HCl to rapidly produce a mixture of 5b/c and 3b/c. The reactivity of the peroxo species demonstrates that they are plausible intermediates in the O(2)-reduction chemistry of hydride complexes 2a-c. These results together show that monometallic rhodium hydride complexes are capable of promoting selective reduction of oxygen to water and that this reaction may be controlled with systematic alteration of the ancillary ligand set.     

Sulfonate-tagged 1,4-diazabutadiene (DAD(S)) ligands and their noble-metal complexes--synthesis, characterization and immobilization in ionic liquids

A series of sulfonate-tagged 1,4-diazabutadiene (DAD(S)) ligands was prepared as salts with typical ionic liquid (IL) cations ([EMIM](+), [BMIM](+), [BMMIM](+), Bu(4)N(+), Bu(3)PMe(+), [Gua-4,4-4,4-4,1](+)). Complexation behaviour of the ligands was investigated by preparing complexes of the types [BMMIM](2)[MCl(2)(DAD(S))] (M = Pd, Pt), [BMMIM][Rh(COD)(DAD(S))] and [BMMIM](2)[Mo(CO)(4)(DAD(S))]. Using UV-Vis spectroscopy, the latter sulfonate-tagged chromophore was shown to be well soluble in the sulfonate IL [BMIM]OTf and completely insoluble in toluene, resulting in perfect immobilization. The crystal structures of [HNEt(3)](2)[2,6-Me(2)-Me-DAD(S)], [BMIM](2)[2,6-Me(2)-Me-DAD(S)], [BMMIM](2)[2,4,6-Me(3)-Me-DAD(S)], [BMMIM](2)[2,6-iPr(2)-Me-DAD(S)] and [HNEt(3)](2)[PdCl(2)(2,6-Me(2)-Me-DAD(S))] were determined. Regarding the diimine fragment, they show geometries similar to the respective non-sulfonated parent compounds.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.