The synthesis of Ag-polypyrrole nanocomposite coated latex particles and their application as a fluorescent quenching agent

 Submicron-sized Ag-polypyrrole/poly(styrene-co-methacrylic acid) (Ag-PPy/P(St-co-MAA)) composite particles were fabricated via a redox reaction between pyrrole and AgNO₃ in the presence of P(St-co-MAA) soap-free latex. The products are characterized by transmission electron microscopy (TEM), electron diffraction spectra (EDS), Raman spectra, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The results showed that Ag-PPy nanocomposites were in situ deposited onto the surface of P(St-co-MAA) latex particles tailored by carboxylic-acid groups. The nanocomposites of Ag-PPy distributed on the surface of polymer particles transformed from discretely dots to continuously coating as the reaction temperature increased from 15℃ to 60℃. Strawberry-like composite particles were obtained at the reaction temperature of 60℃. The TGA characterization confirmed that the Ag-PPy nanocomposites loading onto the P(St-co-MAA) particles were systematically controlled over a range of 6 wt%-42 wt% by changing the reaction temperatures. The fluorescence quenching effect of the Ag-PPy/P(St-co-MAA) composite particles was explored on Rhodamine B as a model molecule with the Stern-Völmer quenching constant K_SV of 5.9×10⁴ (g/mL)^-1. It is suggested that the fluorescence quenching effect is caused by the resonance energy transfer mechanism.     

Morphological structures of poly(vinylidene fluoride)/montmorillonite nanocomposites

Poly(vinylidene fluoride) (PVDF)/montmorillonite (MMT) nanocomposites were prepared by melt blen- ding a kind of organically modified montmorillonite with PVDF. The morphological structures of the nanocomposites were studied using X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). The re- sults indicate that organically modified montmorillonites are in the form of intercalation, exfoliation, and fragments in the PVDF matrix. For the composites, the (001) peak position of MMT was found to shift to a lower angle in XRD patterns, and some MMT fragments could be observed under TEM. MMT loading was favorable to producing the piezoelectric β phase in the PVDF matrix and caused internal stress in α crystals. At the same time, the crystallinity and spherulite size of PVDF decreased with the MMT content. MMT induced β phase is stable even at high temperatures (160℃). For these changes in morphological structures, some possible explanations were proposed based on the experimental re- sults.     

Surface Modification by Compositionally Modulated Multilayered Zn‐Fe Alloy Coatings

Compositionally modulated multilayered alloy (CMMA) coatings of Zn-Fe were developed from acid chloride baths by single bath technique. The production and properties of CMMA Zn-Fe coatings were tailored as a function of switching cathode current densities (SCCD’s) and thickness of individual layers. Corrosion rates (CR) were measured by electrochemical methods. Corrosion resistances were found to vary with SCCD’s and the number of sub layers in the deposit. SCCD’s were optimized for production of Zn-Fe CMMA electroplates showing peak performance against corrosion. The formation of discrete Zn-Fe alloy layers having different compositions in the deposits were demonstrated by scanning electron microscopy (SEM). Improvements in the corrosion resistance of multilayered alloys are due to the inherent barrier properties of CMMA coatings as evidenced by electrochemical impedance spectroscopy (EIS). Corrosion resistance afforded by Zn-Fe CMMA coatings are explained in terms of the n-type semiconductor films at the interface, supported by Mott-Schottky’s plot. It was observed that the alloy with high w(Fe) on the top showed better corrosion resistance compared to that with the less w(Fe) on top. At optimum SCCD’s of 3.0—5.5 A•dm－2, a Zn-Fe CMMA coatings with 600 sub layers showed ca. 45 times better corrosion resistance than conventional Zn-Fe alloy of the same thickness. The deposit showed no red rust even up to 1130 h in salt spray test.     

Study on the morphology, crystalline structure and thermal properties of yam starch acetates with different degrees of substitution

This study was carried out to understand and establish the changes in physicochemical properties of starch extracted from Chinese yam (Dioscorea opposita Thunb.) after acetylation. Yam starch acetates with different degrees of substitution (DS) were prepared by the reaction of yam starch with glacial acetic acid/acetic anhydride using sulfuric acid as the catalyst. Their formation was confirmed by the presence of the carbonyl signal around 1750 cm-1 in the Fourier transform infrared (FT-IR) spectra. The thermal behavior of the native starch and starch acetate were investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results reveal that the starch acetates are more thermally stable than the native starch. The starch esters showed 50% weight loss at tem- peratures from 328℃ to 372 ℃ , while the native starch underwent 50% weight loss at 325℃ . The glass transition temperature (Tg) of the starch decreased from 273℃ to 226℃. The X-ray diffraction (XRD) patterns could be classified as typical of the C-type for yam starch. X-ray diffraction also showed the loss of the ordered C-type starch crystalline structure and the degree of crystallinity of starch de- creased from 36.10% to 10.96% with the increasing DS. The scanning electron microscopy (SEM) sug- gested that the most of the starch granules disintegrated with many visible fragments with the in- creasing DS.     

Radiation grafted poly(vinylidene fluoride)-graft-polystyrene sulfonic acid membranes for fuel cells: Structure-property relationships

<正>Structure-property relationships for poly(vinylidene fluoride)-graft-polystyrene sulfonic acid(PVDF-g-PSSA) fuel cell membranes prepared by a single step method involving radiation-induced grafting of sodium styrene sulfonate(SSS) onto electron beam(EB) irradiated poly(vinylidene fluoride)(PVDF) films were established.The physico-chemical properties of the membranes such as ion exchange capacity,water swelling and proton conductivity were correlated with the degree of grafting(G,%) and the structural changes taking place in the membrane matrix during the preparation procedure. The variation in the crystallinity and the thermal stability of membranes was studied by differential scanning calorimetry (DSC) and thermogravimetric analysis(TGA),respectively.The membranes were found to undergo substantial structural changes in forms of ionic sites increase,hydrophilicity enhancement,hydrophobicity reduction and crystallinity decrease with the variation in G(%) and the preparation method.The structural and thermal properties of the obtained membranes were also compared with their counterparts prepared by a conventional two-steps method i.e.radiation induced grafting of styrene onto EB irradiated PVDF films followed by sulfonation.The PVDF-g-PSSA membranes obtained by a single-step method were found to have superior properties compared to those obtained by the conventional two-steps method.     

The role of nickel oxide additive in lowering the carbon dioxide sorption temperature of CaO

A new type of calcium-based regenerable carbon dioxide(CO2) sorbent, CaO-NiO, was synthesized via the sol-gel method. The as synthesized CO2 sorbent was in the form of nanoparticles. The CO2 sorption temperature and capacity of the sorbent were examined using thermogravimetric analysis(TGA). The CaO-NiO sorbent is able to capture CO2 at a lower sorption temperature(465C) than pure calcium oxide(CaO)(600C). The role of NiO in the CaO-NiO sorbent in lowering the CO2 sorption temperature was also investigated. The sorbent was characterized by X-ray diffractometer(XRD), N2adsorption-desorption analysis, high resolution transmission electron microscopy(HRTEM) and scanning electron microscopy(SEM). CaO and NiO were found to coexist in the sorbent. Neither solid solution nor mixed metal oxide was formed. NiO did not react with CO2 in the sorption process; but it worked like a catalyst to promote the CaO carbonation reaction. It is suggested that this new CaO-NiO sorbent may have a promising application as an effective CO2 sorbent with lower energy consumption.     

Microwave-assisted synthesis of high aspect ratio ruthenium nanorods

<正>Poly(N-vinyl-2-pyrrolidone)(PVP)-stabilized ruthenium nanorods with high aspect ratio by refluxing ruthenium(Ⅲ) chloride in n-propanol have been successfully prepared by means of a facile and rapid microwave heating for the first time.The structure and morphology of the obtained products were characterized by transmission electron microscopy(TEM),select area electron diffraction(SAED),ultraviolet-visible spectrophotometry(UV-vis),X-ray photoelectron spectroscopy(XPS) and Fourier transform spectroscopy(FT-IR).XPS analysis reveals that the nanorods were in the metallic state.TEM images showed that ruthenium nanorods had an obvious one-dimensional structure with the aspect ratio ranged from 5 to 40 nm and length up to 600 nm.SAED patterns indicated that the nanorods were single-crystalline with a hexagonal structure.     

Photoinduced intermolecular and intramolecular actions between eosin and porphyrin

Two dyads of eosin and porphyrin linked with a semi-rigid (-CH2phCH2-) or flexible (-(CH2)4-) bridge and their reference model compounds were synthesized and characterized The intermoleccular interaction and intramolecular photoinduced singlet energy transfer and electron transfer were studied by their absorp tion spectra,fluorescence emission,excitation spectra and fluorescence lifetime The model compounds,ethyl ester of eosm (EoEt) and porphyrin (PorEt),could form complexes in the ground state.When the eosin moieties in dyads were excited,they could transfer some singlet energy to the porphyrins; in the meantime,they could also ndsce electron transfer between two chromophores.Exciting the porphyrin moieties in dyads could induce electron transfer from eosin moieties to porphyrin moieties.The efficiencies (EnT,ET) and rate constants (kEnT,kET) were related to the polarity of solvents and mutual orientation of the two chromophores in dyads.     

Fabrication of Trans-1,4-polyisoprene Nanofibers by Electrospinning and Its Crystallization Behavior and Mechanism

Trans-1,4-polyisoprene(TPI) nanofibers have been fabricated successfully through electrospinning technology.Through the control of electrospinning parameters, highly crystallized TPI fresh fibers composed mainly of β phase were produced. Morphology and diameter of TPI nanofibers can be controlled by adjusting the electrospinning conditions. The in situ observations of FTIR spectra revealed that the crystallinity of the TPI fibers decreased with aging. While for TPI nanofibers aging at 45 °C for 24 h, a decrease in crystallinity as well as β to a transformation was observed with aging and these changings happened in the first 50 h during aging. The mechanism for β-TPI formation during electrospinning process and the reduced crystallinity with aging were proposed.     

Synthesis of Poly（N-vinylpyrrolidone） Nanofibers Containing Gold Nanoparticles via Electrospinning Technique

Poly(N-vinylpyrrolidone)(PVP)nanofibers containing gold nanoparticles were prepared by electrospinning method.This simple route was used to prepare composites on a large scale,and the syntheses are simple.The optical property of gold nanoparticles in PVP aqueous solution was investigated by UV-Visible absorption spectra.The morphology of the fibers and the distribution of particles were characterized by transmission electron microscopy.The structure of the composite was characterized by Fourier transform infrared spectroscopy.