Solubilization of n-alkylbenzenes in aggregates of sodium dodecyl sulfate and a cationic polymer of high charge density (II)

The solubilization property of the aggregate composed of sodium dodecyl sulfate (SDS) and a cationic polymer (polydiallyldimethylammonium chloride, PDADMAC) was investigated. From the binding isotherm, the increasing free SDS concentration (Cf) above the critical aggregation concentration (cac) was clearly confirmed and used to calculate the Gibbs free energy change of solubilization. The maximum additive concentration of the alkylbenzene solubilizates remained almost constant around their aqueous solubilities below the cac and then increased with increasing SDS concentration above the cac and with decreasing alkyl chain length of the solubilizates. Also, their solubility increased with increasing temperature over the concentration range of the surfactant examined. Because the monomeric DS- concentration in the aqueous phase (Cf) increased with the SDS concentration above the cac in the SDS/PDADMAC system, Cf was evaluated from the binding isotherm to calculate the change in the Gibbs energies of transfer of the solubilizates using the phase separation model. The Gibbs energy change for the solubilizates decreased with increasing temperature and increasing alkyl chain length. The decrease in the Gibbs energy per CH2 group (DeltaGCH2 degrees) was favored by an increase of temperature, and it was larger in magnitude than that for micelles of single-surfactant systems. From the values of DeltaH degrees and TDeltaS degrees, the solubilization of alkylbenzenes into SDS/PDADMAC was found to be entropy-driven.     

Solubilization of n-alkylbenzenes into decanoyl-N-methylglucamide (Mega-10) solution

Solubilization of benzene, toluene, ethylbenzene, n-propylbenzene, n-butylbenzene, n-pentylbenzene, and n-hexylbenzene into micelles of decanoyl-N-methylglucamide (Mega-10) was studied, where equilibrium concentrations of the above solubilizates were determined spectrophotometrically at 303.2 K. The concentration of the above solubilizates remained constant below the critical micelle concentration (cmc) and increased linearly with an increase in Mega-10 concentration above the cmc. The Gibbs free energy change of the solubilizates from the aqueous bulk to the liquid solubilizate phase was evaluated from the dependence of their aqueous solubility on the alkyl chain length of the solubilizates, which leads to -3.46 kJ mol-1 for DeltaG(0)(CH), the energy change per CH2 group of the alkyl chain. The first stepwise solubilization constant (K(overline)1 ) was evaluated from the slope of the change of solubilizate concentration versus Mega-10 concentration. The Gibbs free energy change (DeltaG(0,s)) for the solubilization decreased linearly with the carbon number of the alkyl chain of the solubilizates, from which DeltaG(0,s)(CH2) as evaluated to be -2.71 kJ mol-1. The similar values above clearly indicate that the location of the alkyl chain is a hydrophobic micellar core, which is also supported by the absorption spectrum of the solubilized molecules.     

Solubilization of n-alkylbenzenes into octaethylene glycol mono-n-tetradecyl ether (C14E8) micelles

Solubilization of benzene, toluene, ethylbenzene, n-propylbenzene, n-butylbenzene, and n-pentylbenzene into the micelles of octaethylene glycol monotetradecyl ether (C(14)E(8)) was studied, where equilibrium concentrations of all the solubilizates were determined spectrophotometrically at 298.2, 303.2, and 308.2 K. The concentration of the above solubilizates except benzene remained constant below the critical micelle concentration (cmc) and increased linearly with an increase in C(14)E(8) concentration above the cmc, whereas benzene concentration was found to remain constant over the whole concentration range of C(14)E(8). The Gibbs energy change (DeltaG(0)) for their solubilization was evaluated by the partitioning of the solubilizates between the aqueous phase and the micellar phase because of the large aggregation number of the C(14)E(8) micelle. Furthermore, enthalpy and entropy changes for their solubilization were evaluated from the temperature dependence of the DeltaG(0) values. From these thermodynamical parameters and the change in absorption spectra of the solubilizates due to their incorporation into the micelles, the solubilization site was found to move into the inner core of the micelle with increasing alkyl chain length of the solubilizates.     

Temperature effect on solubilization of n-alkylbenzenes into sodium cholate micelles

The solubilization of n-alkylbenzenes (benzene, toluene, ethylbenzene, n-propylbenzene, n-butylbenzene, n-pentylbenzene, n-hexylbenzene) into an aqueous micellar solution of sodium cholate was carried out. Solubilizate concentrations at equilibrium were determined spectrophotometrically at 293.2, 298.2, 303.2, 308.2, and 313.2 K. The first stepwise association constants (K(1)) between solubilizate monomers and vacant micelles were evaluated from the equilibrium concentrations and found to increase with increasing hydrophobicity of the solubilizate molecules. From the Gibbs energy change for solubilization at different micelle aggregation numbers and from the molecular structure of the solubilizates, the function of sodium cholate micelles as solubilizer was discussed. Enthalpy and entropy changes of solubilization were calculated from the temperature dependence of the K(1) values, and the solubilization was found to be enthalpy-driven for the solubilizates with shorter alkyl chains. The results obtained were also compared with those for conventional aliphatic micelles.     

Investigation of the interaction between sodium dodecyl sulfate and cationic polymers

Aggregation properties of sodium dodecyl sulfate (SDS) on a cationic hydroxyethyl cellulose, Polyquaternium-10 (PQ-10), of low charge density were studied by potentiometric and pyrene fluorescence methods and compared with those of poly(diallyldimethylammomium chloride) (PDADMAC) of high charge density. The critical aggregation concentration (cac) was measured with the potentiometric method and further confirmed with the fluorescence method. The former was found to be more accurate. The value of the cac for the SDS/PQ-10 system was measured at 100, 200, and 400 ppm polymer and at 288.2,298.2, and 308.2 K. They showed almost the same cac value, 0.04 mmol dm-3. The I1/I3 value of the pyrene fluorescence spectrum in the SDS/PQ-10 system at higher SDS concentration was smaller than that in SDS/PDADMAC solution and much larger than that of water. From the binding isotherm by the potentiometric method, the free DS- concentration (Cf) and the bound DS- concentration (Cb) could be evaluated with ease over the SDS concentration range above the cac. The aggregation number of DS- aggregates for both the above polymers was evaluated from the fluorescence quenching method using the values of Cf and Cb from the potentiometric method. Because Cf in the SDS/PQ-10 system above the cac did not maintain a constant value contrary to that in the SDS/PDADMAC system but increased quite a lot, Cb should not be regarded as [SDS] - cac above the cac. The aggregation number in the SDS/PQ-10 system increased almost linearly with increasing total concentration of SDS, while that in the SDS/PDADMAC system reached a plateau. With increasing temperature, the aggregation number of the SDS/PDADMAC system decreased more rapidly than that of the SDS/PQ-10 system.     

Fading phenomena of azo oil dye in anionic-nonionic surfactant solutions III. The effect of solubilizates on the fading behavior of azo oil dye in mixed surfactant systems

The effects of solubilizates on the fading behavior of 4-phenylazo-1-naphthol (4-OH) in aqueous solutions of anionic-nonionic mixed surfactant systems are described; the systems studied are sodium dodecyl sulfate (SDS) — octadecyl poly(oxyethylene) ethers (C₁₈POE₂₀). The fading rate of 4-OH in the mixed solution was independent of the addition of octane. By adding octanoic acid, the rate became faster. On the other hand, the 1-octanol slowed the rate. The fading speed of 4-OH decreased as the concentration of the alcohol and the number of carbon atoms in the alcohol molecule, used as a solubilizate, increased. The sizes of mixed micelles penetrated by the solubilizate were dependent on the kind of oily materials and on the alkyl chain lengths in the molecules of normal higher alcohols. Relative viscosities and effective specific volumes in the mixed micellar solutions increased with the increase in the concentration of 1-octanol and octanoic acid, and with increasing the number of alkyl groups in the alcohol molecule. The effect of solubilizates on the fading behavior of 4-OH was found to be dependent on the differences in their solubilization sites in mixed micelles. A solubilizate with a strong polar group supported a hydrophilic-hydrophilic interaction, whereas one including a weak polar group did not.     

Calorimetric study of the solubilization of cholesterol,retinol and retinal by reversed AOT micelles

Distribution constants and standard enthalpies of transfer of cholesterol, retinol and retinal partitioned between n-heptane and water containing reversed sodium bis(2-ethylhexyl) sulfosuccinate (AOT) micelles as a function of the molar concentration ratio (R=[water]/[AOT]) were evaluated by a calorimetric method. The results indicate that, in spite of the bulky hydrocarbon radical, these solubilizates behave like alcohols with a short alkyl chain. Moreover, cholesterol is always solubilized in the palisade layer of the reversed micelles whereas retinol and retinal are preferentially solubilized in the aqueous pseudophase. The influence of the enthalpic and the entropic contributions to the transfer of the solubilizates from n-heptane to reversed AOT micelles are also considered.     

Interaction between a partially fluorinated alkyl sulfate and gelatin in aqueous solution

The interaction of a partially fluorinated alkyl sulfate, sodium 1H,1H,2H,2H-perfluorooctyl sulfate (C6F13CH2CH2OSO3Na), with the polyampholyte gelatin has been examined in aqueous solution using surface tension and small-angle neutron scattering (SANS). The 19F chemical shift of each fluorine environment in the surfactant is unaltered by the addition of gelatin, indicating that there is no contact between the gelatin and the fluorocarbon core of the micelle. The chemical shift of the two methylene groups closest to the headgroup is altered when gelatin is present, disclosing the location of the polymer. The critical micelle concentration (cmc) of the surfactant, cmc = 17+/-1 mM, corresponds to an effective alkyl chain (CnH2n+1) length of n = 11. In the presence of gelatin, the cmc is substantially reduced as expected, cmc(1) = 4+/-1 mM, which is also consistent with an effective alkyl chain length of n = 11. In the presence of the fluorosurfactant, the monotonic decay of the SANS from the gelatin-only system is replaced by a substantial peak at an intermediate Q value mirroring the micellar interaction. At low ionic strengths, the gelatin/micelle complex can be described by an ellipsoid. At higher ionic strengths, the electrostatic interaction between the micelles is screened and the peak in the gelatin scattering disappears. The correlation length describing the network structure decreases with increasing SDS concentration as the bound micelles promote a collapse of the network.     

Star-shaped trimeric quaternary ammonium bromide surfactants: adsorption and aggregation properties

Novel star-shaped trimeric surfactants consisting of three quaternary ammonium surfactants linked to a tris(2-aminoethyl)amine core were synthesized. Each ammonium had two methyls and a straight alkyl chain of 8, 10, 12, or 14 carbons. The adsorption and aggregation properties of these tris(N-alkyl-N,N-dimethyl-2-ammoniumethyl)amine bromides (3C(n)trisQ, in which n represents alkyl chain carbon number) were characterized by equilibrium and dynamic surface tension, rheology, small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) techniques. 3C(n)trisQ showed critical micelle concentrations (CMC) 1 order of magnitude lower than that of the corresponding gemini surfactants with an ethylene spacer and the corresponding monomeric surfactants. The logarithm of the CMC decreased linearly with increasing hydrocarbon chain length for 3C(n)trisQ. The slope of the line, which is well-known as Klevens equation, was larger than those of the monomeric and gemini surfactants; however, considering the total carbon number in the chains, the slope was shallower than the monomeric and was close to the gemini. Through the results such as surface tensions at the CMC (32-34 mN m(-1)) and the parameters of standard free energy, CMC/C(20) and pC(20), it was found that 3C(n)trisQ could adsorb densely at the air/water interface despite the strong electrostatic repulsion between multiple quaternary ammonium headgroups. Moreover, dynamic surface tension measurements showed that the kinetics of adsorption for 3C(n)trisQ to the air/water interface was slow because of their bulky structures. Furthermore, the results of rheology, SANS, and cryo-TEM determined that 3C(n)trisQ with n = 10 and 12 formed ellipsoidal micelles at low concentrations in solution and the structures transformed to threadlike micelles with very few branches for n = 12 as the concentration increased, but for n = 14 threadlike micelles formed at relatively low concentrations.     

Effect of alkyl chain length, head group and nature of the surfactant on the hydrolysis of 1,3-benzoxazine-2,4-dione and its derivatives

The alkaline hydrolysis of carsalam (2H-1,3-benzoxazine-2,4(3H)-dione), denoted as I, and its N-substituted derivatives i.e., N-methyl-1,3-benzoxazine-2,4-dione (II) and N-benzoyl-1,3-benzoxazine-2,4-dione (III) was studied spectrophotometrically at physiological temperature. The rate of hydrolysis was found to be independent on the substrate concentration. In case of I, the reaction was fractional order with respect to [OH(-)] while for II and III, reaction obeyed the first order kinetics. Effect of cationic surfactants with varying hydrophobic chains (cetyltrimethylammonium bromide, CTAB, tetradecyltrimethylammonium bromide, TTAB and dodecyltrimethylammonium bromide, DTAB) and with different head-group (cetyl pyridinium chloride, CPC) and anionic surfactant (sodium dodecyl sulfate, SDS) was also seen on the rate of alkaline hydrolysis of the carsalam and its derivatives. Cationic surfactants first catalyzed the rate of hydrolysis at lower concentrations followed by the inhibition at higher concentrations. The length of the alkyl chain had remarkable effect on the catalytic efficiency of the surfactants. Similarly N-substitution on substrate also increased the catalysis by micelles. The anionic surfactant SDS inhibited the rate of hydrolysis at all of the concentrations studied. The catalysis by cationic micelles followed by inhibition was treated in terms of the pseudophase ion-exchange model, while for the inhibition by SDS micelles the Menger-Portnoy model was used to fit the data. The effect of salts (NaCl, NaBr and (CH(3))(4)NBr) was also seen on the hydrolysis of II and it was found that all salts inhibited the rate of reaction. The inhibition follows the trend NaCl相似文献   

Stopped-flow kinetic studies of sphere-to-rod transitions of sodium alkyl sulfate micelles induced by hydrotropic salt

The kinetics and mechanism of sphere-to-rod transitions of sodium alkyl sulfate micelles induced by hydrotropic salt, p-toluidine hydrochloride (PTHC), were investigated by stopped-flow with light scattering detection. Spherical sodium dodecyl sulfate (SDS) micelles transform into short ellipsoidal shapes at low salt concentrations ([PTHC]/[SDS], chi(PTHC)=0.3 and 0.4). Upon stopped-flow mixing aqueous solutions of spherical SDS micelles with PTHC, the scattered light intensity gradually increases with time. Single exponential fitting of the dynamic traces leads to characteristic relaxation time, tau(g), for the growth process from spherical to ellipsoidal micelles, and it increases with increasing SDS concentrations. This suggests that ellipsoidal micelles might be produced by successive insertion of unimers into spherical micelles, similar to the case of formation of spherical micelles as suggested by Aniansson-Wall (A-W) theory. At chi(PTHC) > or = 0.5, rod-like micelles with much higher axial ratio form. The scattered light intensity exhibits an initially abrupt increase and then levels off. The dynamic curves can be well fitted with single exponential functions, and the obtained tau(g) decreases with increasing SDS concentration. Thus, the growth from spherical to rod-like micelles might proceed via fusion of spherical micelles, in agreement with mechanism proposed by Ikeda et al. At chi(PTHC)=0.3 and 0.6, the apparent activation energies obtained from temperature dependent kinetic studies for the micellar growth are 40.4 and 3.6 kJ/mol, respectively. The large differences between activation energies for the growth from spherical to ellipsoidal micelles at low chi(PTHC) and the sphere-to-rod transition at high chi(PTHC) further indicate that they should follow different mechanisms. Moreover, the sphere-to-rod transition kinetics of sodium alkyl sulfate with varying hydrophobic chain lengths (n=10, 12, 14, and 16) are also studied. The longer the carbon chain lengths, the slower the sphere-to-rod transition.     

Micellization of dissymmetric cationic gemini surfactants and their interaction with dimyristoylphosphatidylcholine vesicles

The micellization process of a series of dissymmetric cationic gemini surfactants [CmH2m+1(CH3)2N(CH2)6N(CH3)2C6H13]Br2 (designated as m-6-6 with m = 12, 14, and 16) and their interaction with dimyristoylphosphatidylcholine (DMPC) vesicles have been investigated. In the micellization process of these gemini surfactants themselves, critical micelle concentration (cmc), micelle ionization degree, and enthalpies of micellization (DeltaHmic) were determined, from which Gibbs free energies of micellization (DeltaGmic) and entropy of micellization (DeltaSmic) were derived. These properties were found to be influenced significantly by the dissymmetry in the surfactant structures. The phase diagrams for the solubilization of DMPC vesicles by the gemini surfactants were constructed from calorimetric results combining with the results of turbidity and dynamic light scattering. The effective surfactant to lipid ratios in the mixed aggregates at saturation (Resat) and solubilization (Resol) were derived. For the solubilization of DMPC vesicles, symmetric 12-6-12 is more effective than corresponding single-chain surfactant DTAB, whereas the dissymmetric m-6-6 series are more effective than symmetric 12-6-12, and 16-6-6 is the most effective. The chain length mismatch between DMPC and the gemini surfactants may be responsible for the different Re values. The transfer enthalpy per mole of surfactant within the coexistence range may be associated with the total hydrophobicity of the alkyl chains of gemini surfactants. The transfer enthalpies of surfactant from micelles to bilayers are always endothermic due to the dehydration of headgroups and the disordering of lipid acyl chain packing during the vesicle solubilization.     

H-aggregation of cationic palladium-porphyrin as a function of anionic surfactant studied using phosphorescence, absorption and RLS spectra

Room temperature phosphorescence (RTP) was used as a useful analytical tool to investigate the interaction behavior between tetracationic meso-tetrakis (4-trimethylaminophenyl) porphyrin palladium (Pd-TAPP) and anionic sodium dodecyl sulfate (SDS). UV-vis absorption and resonance light scattering (RLS) were further applied to characterize the system. It was presumably suggested that nonspecific self-aggregates among porphyrins formed considering the relatively high concentration of Pd-TAPP. Furthermore, Pd-TAPP changed from free monomer/nonspecific aggregate to H-aggregate and then to out-micellized monomer/nonspecific aggregate as a function of SDS concentration. The fact that RTP signal enhanced obviously and excitation spectrum was blue-shifted by 1580cm(-1) in energy with respect to energy of free Pd-TAPP monomer demonstrated that 1:4 electrostatic interaction between Pd-TAPP and SDS led to the formation of the premicellar porphyrin-surfactant H-aggregates. The RLS spectrum reviewed that the formed H-aggregates were multiple porphyrin units, and UV-vis spectra revealed that cationic groups of monomers/nonspecific aggregates of Pd-TAPP were electrostatically attracted in favor of the surface of anionic micelles but were not encapsulated within apolar regions of SDS micelles when the concentration of SDS was above its critical micelle concentration (CMC).     

Thermodynamic studies of the interaction of molecular micelles and copolymerized molecular micelles with benzodiazepines and alkyl phenyl ketones using MEKC

In this study, polymers of sodium 10-undecenoyl L-leucinate (SUL) and sodium undecenyl sulfate (SUS) as well as their copolymerized molecular micelles (CoPMMs) were applied in MEKC as pseudostationary phases to separate benzodiazepines and alkyl phenyl ketones. SDS, a common pseudostationary phase used in MEKC, was also used for comparison. The van't Hoff relationship was applied to compute the temperature dependence of the MEKC retention factors of the test solutes to estimate the enthalpy, entropy, and the Gibbs free energy. Nonlinear van't Hoff plots were obtained with the majority of benzodiazepines indicating that the thermodynamic parameters were temperature-dependent in all surfactant systems for these solutes. In contrast, all alkyl phenyl ketones resulted in linear van't Hoff plots.     

Compositional effects on electrophoretic and chromatographic figures of merit in electrokinetic chromatography with cetyltrimethylammonium bromide/sodium octyl sulfate vesicles as the pseudostationary phase. Part 1: effect of the phase ratio

The effect of the phase ratio on the electrophoretic and chromatographic properties of unilamellar vesicles comprised of cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) was investigated in EKC. The surfactant concentration of the vesicles was 0.9, 1.2, 1.5, and 1.8% w/v, with a mole ratio of 1:3.66 (CTAB/SOS). Results were compared to those obtained using SDS micelles at concentrations of 1.0% (w/v, 35 mM) and 1.5% (52 mM). The CTAB/SOS vesicles (0.9-1.8% w/v) provided a significantly larger elution range (5.7 < or = t(ves)/t(0) < or = 8.7) and greater hydrophobic (methylene) selectivity (2.8 < or = alpha(CH2) < or = 3.1) than SDS micelles (3.1 < or = t(mc)/t(0) < or = 3.3; alpha(CH2) = 2.2). Whereas the larger elution range can be attributed to the 25% reduction in EOF due to the interaction of unaggregated CTAB cations and the negatively charged capillary wall, the higher methylene selectivity is likely due to the lower concentration of water expected in the CTAB/SOS vesicle bilayer compared to the Palisades layer of SDS micelles. For a given phase ratio, CTAB/SOS vesicles are somewhat less retentive than SDS micelles, although retention factors comparable to those observed in 1.0-1.5% SDS can be obtained with 1.5-1.8% CTAB/SOS. A linear relationship was observed between phase ratio and retention factor, confirming the validity of the phase ratio model for these vesicles. Unique polar group selectivities and positional isomer shape selectivities were obtained with CTAB/SOS vesicles, with both types of selectivities being nearly independent of the phase ratio. For four sets of positional isomers, the elution order was always para < ortho < meta. Finally, the thermodynamics of solute retention was qualitatively similar to that reported for other surfactant aggregates (micelles and microemulsions); the enthalpic contribution to retention was consistently favorable for all compounds, whereas the entropic contribution was favorable only to hydrophobic solutes.     

Solubilization of Polycyclic Aromatic Compounds into n-Decyltrimethylammonium Perfluorocarboxylate Micelles

Solubilization of polycyclic aromatic compounds in aqueous dilute solutions of three cationic amphiphiles was studied. The maximum additive concentrations (MACs) of the aromatic compounds were constant below their critical micelle concentrations (cmcs) and monotonically increased above the cmcs. The first stepwise association constants (K(1)) between a solubilizate monomer and a vacant micelle were evaluated from the MACs for the solubilizates using the mass action model for solubilization into micelles in the dilute solution. The standard Gibbs energy changes of solubilization (DeltaG degrees ) were calculated from K(1), and the enthalpy and entropy changes of solubilization were estimated from the temperature dependence. MACs of each surfactant at the same surfactant concentration above the cmc were different depending on the cmc, but there was little difference in the DeltaG degrees values. Some differences appeared in the enthalpy and entropy values in accordance with their micellar size or degrees of counterion binding to micelles. DeltaG degrees for solubilization decreased linearly with carbon number of aromatic solubilizate for each micellar solution. Copyright 2000 Academic Press.     

Novel alkyl-modified anionic siloxanes as pseudostationary phases for electrokinetic chromatography: II. Selectivity studied by linear solvation energy relationships.

Anionic, water-soluble siloxane polymers modified with different lengths of alkyl chains have very different selectivity than sodium dodecyl sulfate (SDS) micelles when used as pseudostationary phases in electrokinetic chromatography. The siloxanes in this study are random copolymers with side chains bearing sulfonate groups and alkyl groups (C8, C12, or C18), with the proportion of alkyl groups between 10 and 25% of the total. The differences in selectivity have been studied by linear solvation energy relationships (LSERs). The siloxanes in general have been found to be more cohesive, less polar, more able to interact with solutes through n- and pi-electrons, and more able to accept hydrogen bonds than SDS micelles, while the ability to act as hydrogen bond donors is not significantly different than SDS micelles. In addition, the performance in a pH 7.0 Tris buffer has been investigated and the siloxanes were found to have higher methylene selectivities and more variable electrophoretic mobilities than in borate buffers.     

The solubilization of n-pentane gas in sodium dodecyl sulfate-polyethylene glycol solutions with and without electrolyte

The solubility of n-pentane gas in aqueous solution of sodium dodecyl sulfate (SDS), SDS-0.1 wt% polyethylene oxide (PEG), SDS-0.1 wt% PEG+NaCl (0.1 mol/l), and SDS-0.1 wt% PEG+NaOH (0.1 mol/l) has been determined at 318.15 K. The concentration of SDS (m(SDS)) is up to 50 mmol/kg. The solubility increases linearly with the concentration of SDS above its critical micelle concentration (CMC) or critical aggregation concentration (CAC), indicating that micelles in the solutions solubilize the gas molecules and the solubility of n-pentane gas in the micelles is independent of the SDS concentration. It was found that the solubilization ability of micelles bound to PEG and free micelles to n-pentane gas is almost the same. The solubility of n-pentane gas in micelle phase is three magnitudes higher than that in the bulk solution. The solubilization property of SDS is changed by the addition of PEG, although the solubilizing effect of the polymer alone is not considerable. NaCl and NaOH affect the solubilization noticeably and increase the interaction strength between SDS and PEG. The standard Gibbs energies for the transfer of n-pentane gas from bulk phase to micelle phase are large negative values, indicating that the hydrocarbon gas prefers to exist in the hydrophobic interior of the micelles.     

Surface adsorption of zwitterionic surfactants: n-alkyl phosphocholines characterised by surface tensiometry and neutron reflection

The surface adsorption of n-dodecyl phosphocholine (C12PC) has been characterised by a combined measurement of surface tension and neutron reflectivity. The critical micellar concentration (CMC) was found to be 0.91 mM at 25 degrees C in pure water. At the CMC, the limiting area per molecule (A(cmc)) was found to be 52+/-3 A2 and the surface tension (gamma(cmc)) to be ca. 40.0+/-0.5 mN/m. The parallel study of chain isomer n-hexadecyl phosphocholine (C16PC) showed a decrease of the CMC to 0.012 mM and a drop of gamma(cmc) to 38.1+/-0.5 mN/m. However, A(cmc) for C16PC was found to be 54+/-3 A2, showing that increase in alkyl chain length by four methylene groups has little effect on A(cmc). The almost constant A(cmc) suggested that the limiting area per molecule was determined by the bulky PC head group. It was further found that the surface tension and related key physical parameters did not vary much with temperature, salt addition, solution pH or any combination of these, thus showing that surface adsorption and solution aggregation from PC surfactants is largely similar to the zwitterionic betaine surfactants and is distinctly different from ionic and non-ionic surfactants. The thickness of the adsorbed monolayers measured from both dC12hPC and dC16hPC was found to be 20-22 A at the CMC from neutron reflectivity. Neither A(cmc) nor layer thickness varied with alkyl chain length, indicating that as the alkyl chain length became longer it was further tilted away from the surface normal direction and the layer packing density increased. It was also observed that the thickness of the layer varied little with surfactant concentration, indicating that the average conformational orientation of the alkyl chain remained unchanged against varying surface coverage.     

Controlling the melting of kinetically frozen poly(butyl acrylate-b-acrylic acid) micelles via addition of surfactant

We have studied the melting of polymeric amphiphilic micelles induced by small-molecule surfactant and explained the results by experimental determination of the interfacial tension between the core of the micelles and the surfactant solutions. Poly(n-butyl acrylate-b-acrylic acid) (PBA-b-PAA) amphiphilic diblock copolymers form kinetically frozen micelles in aqueous solutions. Strong interactions with surfactants, either neutral or anionic [C12E6, C6E4, sodium dodecyl sulfate (SDS)], were revealed by critical micelle concentration (cmc) shifts in specific electrode and surface tension measurements. Since both polymer and surfactant are either neutral or bear negative charges, the attractive interactions are not due to electrostatic interactions. Light scattering, neutron scattering, and capillary electrophoresis experiments showed important structural changes in mixed PBA-b-PAA/surfactant systems. Kinetically frozen micelles of PBA-b-PAA, that are hardly perturbed by concentration, ionization, ionic strength, and temperature stresses, can be disintegrated by addition of small-molecule surfactants. The interfacial energy of the PBA in surfactant solutions was measured by drop shape analysis with h-PBA homopolymer drops immersed in small-molecule surfactant solutions. The PBA/water interfacial energy gammaPBA/H2O of 20 mN/m induces a high energy cost for the extraction of unimers from micelles so that PBA-b-PAA micelles are kinetically frozen. Small-molecule surfactants can reduce the interfacial energy gammaPBA/solution to 5 mN/m. This induces a shift of the micelle-unimer equilibrium toward unimers and leads, in some cases, to the apparent disintegration of PBA-b-PAA micelles. Before total disintegration, polymer/surfactant mixtures are dispersions of polydisperse mixed micelles. Based on core interfacial energy arguments, the disintegration of kinetically frozen polymeric micelles was interpreted by gradual fractionation of objects (polydisperse dispersion mechanism), whereas the disintegration of polymeric micelles in a thermodynamically stable state was interpreted by an exchange between a population of large polymer-rich micelles and a population of small surfactant-rich micelles (bidisperse dispersion mechanism). Finally, in our system and other systems from the literature, interfacial energy arguments could explain why the disintegration of polymer micelles is either partial or total as a function of the surfactant type and concentration and the hydrophobic block molar mass of the polymer.