A structural study of the perovskite series Na0.75Ln0.25Ti0.5Nb0.5O3

The ternary stoichiometric perovskite compounds, Na_0.75Ln_0.25Ti_0.5Nb_0.5O₃ (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm) are intermediate members of the NaNbO₃-Na_0.5Ln_0.5TiO₃ solid solution series. The compounds were synthesized by standard ceramic methods at 1300 °C followed by annealing at 800 °C and quenching to ambient conditions. Rietveld analysis of the powder X-ray diffraction patterns shows that the compounds with Ln ranging from Pr to Tm adopt the orthorhombic space group Pbnm (a≈b≈√2a_p; c≈2a_p; Z=4) and the GdFeO₃ structure. In contrast, Na_0.75La_0.25Ti_0.5Nb_0.5O₃ adopts the orthorhombic space group Cmcm (a≈b≈c≈2a_p; Z=4). All cations located at the A- and B-sites are disordered in these compounds. The unit cell parameters and cell volumes of the compounds decrease regularly with increasing atomic number of the Ln cation. The Pbnm compounds with Ln from Sm to Tm have A-site cations in eight-fold coordination. A-site cations in the Pr and Nd compounds are considered to be in ten-fold coordination. Analysis of the crystal chemistry of the Pbnm compounds shows that B-site cations enter the second coordination sphere of the A-site cations for compounds with Ln from Tb to Tm as the A-B intercation distances are less than the maximum A-^IIO(2) bond lengths. The [111] tilt angles of the (Ti,Nb)O₆ polyhedra in the Pbnm compounds increase with increasing atomic number from 11.1° to 15.8° and are less than those observed in lanthanide orthoferrite and orthoscandate perovskites. These data are considered as relevant to the sequestration of lanthanide fission products in perovskite and the structure of lanthanide-bearing perovskite-structured minerals.     

Electron doping effect on structural and magnetic phase transitions in Sr2−xNdxFeMoO6 double perovskites

Polycrystalline Sr_2−xNd_xFeMoO₆ (x=0.0, 0.1, 0.2, 0.4) materials have been synthesized by a citrate co-precipitation method and studied by neutron powder diffraction (NPD) and magnetization measurements. Rietveld analysis of the temperature-dependent NPD data shows that the compounds (x=0.0, 0.1, 0.2) crystallize in the tetragonal symmetry in the range 10-400 K and converts to cubic symmetry above 450 K. The unit cell volume increases with increasing Nd³⁺ concentration, which is an electronic effect in order to change the valence state of the B-site cations. Antisite defects at the Fe-Mo sublattice increases with the Nd³⁺ doping. The Curie temperature was increased from 430 K for x=0 to 443 K for x=0.4. The magnetic moment of the Fe-site decreases while the Mo-site moment increases with electron doping. The antiferromagnetic arrangement causes the system to show a net ferrimagnetic moment.     

Electron-doping through La-for-Sr substitution in (Sr1−xLax)2FeTaO6: Effects on the valences and ordering of the B-site cations, Fe and Ta

We have employed aliovalent A-site cation substitution, La^III-for-Sr^II, to dope the Sr(Fe_0.5Ta_0.5)O₃ perovskite oxide with electrons. Essentially single-phase samples of (Sr_1−xLa_x)(Fe_0.5Ta_0.5)O₃ were successfully synthesized up to x≈0.3 in a vacuum furnace at 1400 °C. The samples were found to crystallize (rather than with orthorhombic symmetry) in monoclinic space group P2₁/n that accounts for the partial ordering of the B-site cations, Fe and Ta. With increasing La-substitution level, x, the degree of Fe/Ta order was found to increase such that the La-richest compositions are best described by the B-site ordered double-perovskite formula, (Sr,La)₂FeTaO₆. From Fe L₃ and Ta L₃ XANES spectra it was revealed that upon electron doping the two B-site cations, Fe^III and Ta^V, are both prone to reduction. Magnetic susceptibility measurements showed spin-glass type behaviour for all the samples with a transition temperature slightly increasing with increasing x.     

Structure and conductivity of strontium-doped cerium orthovanadates Ce1−xSrxVO4 (0≤x≤0.175)

A-site substituted cerium orthovanadates, Ce_1−xSr_xVO₄, were synthesised by solid-state reactions. It was found that the solid solution limit in Ce_1−xSr_xVO₄ is at x=0.175. The crystal structure was analysed by X-ray diffraction and it exhibits a tetragonal zircon structure of space group I4₁/amd (1 4 1) with a=7.3670 (3) and c=6.4894 (1) Å for Ce_0.825Sr_0.175VO₄. The UV-vis absorption spectra indicated that the compounds have band gaps at room temperature in the range 4.5-4.6 eV. Conductivity measurements were performed for the first time up to the strontium solid solution limit in air and in dry 5% H₂/Ar with conductivity values at 600 °C ranging from 0.3 to 30 mS cm⁻¹ in air to 30-45 mS cm⁻¹ in reduced atmosphere. Sample Ce_0.825Sr_0.175VO₄ is redox stable at a temperature below 600 °C although the conductivity is not high enough to be used as an electrode for solid oxide fuel cells.     

Structural and physical properties evolution in the 6H BaRu1−xMnxO3 synthesized under high pressure

The 6H BaRu_1−xMn_xO₃ with the hexagonal BaTiO₃ structure was synthesized using high-pressure sintering method. It is found that the lattice parameter deviates from Vegard's law at x=0.3 for the solid solutions due to the charge transfer effects at B-site. The substitution of Mn for Ru cations gives rise to the short-range magnetic ordering, due to the disordered arrangement of Ru and Mn cations. The compounds are weak ferromagnetic in the x range 0.05-0.40, with the maximal Curie temperature T_c 175.2 K at x=0.10. They are of spin-glass-like magnetism at lower temperature at x?0.1. With Mn doping, the 6H BaRuO₃ transforms to a semiconductor from the primal metal at x=0.30. The resistance as a function of temperature below about 70 K follows the two-dimensional variable-range hopping conduction mechanism in BaRu_0.50Mn_0.50O₃.     

Structure and phase composition of nanocrystalline Ce1−xLuxO2−y

The microstructure and phase stability of nanocrystalline mixed oxide Lu_xCe_1−xO_2−y (x=0-1) are described. Nano-sized (3-4 nm) oxide particles were prepared by the reverse microemulsion method. Morphological and structural changes upon heat treatment in an oxidizing atmosphere were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman and Yb³⁺ emission spectroscopy, the latter ion being present as an impurity in the Lu₂O₃ starting material. Up to 950 °C, the samples were single phase, with structure changing smoothly with Lu content from fluorite type (F) to bixbyite type (C). For the samples heated at 1100 °C phase separation into coexisting F- and C-type structures was observed for 0.35<x<0.7. It was also found that addition of Lu strongly hinders the crystallite growth of ceria during heat treatment at 800 and 950 °C.     

Photoluminescence in the CaxSr1−xWO4 system at room temperature

In this work, a study was undertaken about the structural and photoluminescent properties, at room temperature, of powder samples from the Ca_xSr_1−xWO₄ (x=0-1.0) system, synthesized by a soft chemical method and heat treated between 400 and 700 °C. The material was characterized using Infrared, UV-vis and Raman spectroscopy and XRD. The most intense PL emission was obtained for the sample calcined at 600 °C, which is neither highly disordered (400-500 °C), nor completely ordered (700 °C). Corroborating the role of disorder in the PL phenomenon, the most intense PL response was not observed for pure CaWO₄ or SrWO₄, but for Ca_0.6Sr_0.4WO₄. The PL emission spectra could be separated into two Gaussian curves. The lower wavelength peak is placed around 530 nm, and the higher wavelength peak at about 690 nm. Similar results were reported in the literature for both CaWO₄ and SrWO₄.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

New oxypnictide superconductors: PrOFe1−xCoxAs

Oxypnictides of the type PrOFe_1−xCo_xAs (x≤0.3) were synthesized for the first time by the sealed tube method. All the compounds were found to be monophasic and crystallize in the tetragonal ZrCuSiAs type structure (space group=P4/nmm) and the lattice parameters (a and c) decrease with increase in cobalt content. Mössbauer measurements of the compounds indicate low spin Fe²⁺ in tetrahedral coordination. Resistivity and magnetization studies reveal superconducting transitions in compounds with ‘x’=0.05, 0.10 and 0.15, with maximum transition temperature (T_c) at ∼14 K in the compound with ‘x’=0.1. The variation of resistivity with temperature under different magnetic field has been studied to estimate the upper critical field (H_c2) (∼50.2 T for the ‘x’=0.1 composition). The Seebeck and Hall coefficient (R_H) suggests electron type charge carriers in these compound and the charge carrier density increases with increase in Co-doping.     

Composition- and temperature-dependent phase transitions in 1:3 ordered perovskites Ba4−xSrxNaSb3O12

A series of 25 members of the 1:3 ordered perovskite family of the type Ba_4−xSr_xNaSb₃O₁₂ has been synthesized and their structures determined using synchrotron X-ray and neutron powder diffraction techniques. At room temperature the sample Ba₄NaSb₃O₁₂ has a cubic structure in space group with a=8.2821(1) Å, where the Na and Sb cations are ordered in the octahedral sites but there is no tilting of the (Na/Sb)O₆ octahedra. As the average size of the A-site cation decreases, through the progressive replacement of Ba by Sr, tilting of the octahedra is introduced firstly lowering the symmetry to tetragonal in P4/mnc then to orthorhombic in Cmca and ultimately a monoclinic structure in P2₁/n as seen for Sr₄NaSb₃O₁₂ with a=8.0960(2) Å, b=8.0926(2) Å, c=8.1003(1) Å and β=90.016(2)°. The powder neutron diffraction studies show that the orthorhombic and tetragonal phases in Cmca and P4/mnc co-exist at room temperature for samples with x between 1.5 and 2.     

Three-layer Aurivillius phases containing magnetic transition metal cations: Bi2−xSr2+x(Nb,Ta)2+xM1−xO12, M=Ru, Ir, Mn, x≈0.5

We report the synthesis of Aurivillius-type phases incorporating magnetic M⁴⁺ cations (M=Mn, Ru, Ir), based on the substitution of M⁴⁺ for Ti⁴⁺ in Bi₂Sr₂(Nb,Ta)₂TiO₁₂. The key to incorporating these magnetic transition metal cations appears to be the partial substitution of Sr²⁺ for Bi³⁺ in the α-PbO-type layer of the Aurivillius phase, leading to a concomitant decrease in the M⁴⁺ content; i.e., the composition of the prepared compounds was Bi_2−xSr_2+x(Nb,Ta)_2+xM_1−xO₁₂, x≈0.5. These compounds only exist over a narrow range of x, between an apparent minimum (x≈0.4) Sr²⁺ content in the α-PbO-type [Bi₂O₂] layer required for Aurivillius phases to form with magnetic M⁴⁺ cations, and an apparent maximum (x≈0.6) Sr²⁺ substitution in this [Bi₂O₂] layer. Rietveld-refinement of synchrotron X-ray powder diffraction data making use of anomalous dispersion at the Nb and Ru K edges show that the overwhelming majority of the incorporated M cations occupy the central of the three MO₆ octahedral layers in the perovskite-type block. Magnetic susceptibility measurements are presented and discussed in the context of the potential for multiferroic (magnetoelectric) properties in these materials.     

Thermoelectric properties of polycrystalline La1−xSrxCoO3

Thermoelectric properties of polycrystalline La_1−xSr_xCoO₃, where Sr²⁺ is substituted in La³⁺ site in perovskite-type LaCoO₃, have been investigated. Sr-doping increases the electrical conductivity (σ) of La_1−xSr_xCoO₃, and also decreases the Seebeck coefficient (S) for 0.01?x?0.40. A Hall coefficient measurement reveals that the increase in electrical conductivity arises from increases in both carrier concentration and the Hall mobility. The decrease in the Seebeck coefficient is caused by a decrease in carrier effective mass as well as increase in carrier concentration. The highest power factor (σS²) is 3.7×10⁻⁴ W m⁻¹ K⁻² at 250 K for x=0.10. The thermal conductivity (κ) is about 2 W m⁻¹ K⁻¹ at 300 K for 0?x?0.04, and increases for x?0.05 because of an increase in heat transport by conductive carrier. The thermoelectric properties of La_1−xSr_xCoO₃ are improved by Sr-doping, and the figure of merit (Z=σS² κ⁻¹) reaches 1.6×10⁻⁴ K⁻¹ for x=0.06 at 300 K (ZT=0.048). For heavily Sr-doped samples, the thermoelectric properties diminish mainly because of the decrease in the Seebeck coefficient and the increase in thermal conductivity.     

Long-range ordering in the Bi1−xAexFeO3−x/2 perovskites: Bi1/3Sr2/3FeO2.67 and Bi1/2Ca1/2FeO2.75

Two-ordered perovskites, Bi_1/3Sr_2/3FeO_2.67 and Bi_1/2Ca_1/2FeO_2.75, have been stabilized and characterized by transmission electron microscopy, Mössbauer spectroscopy and X-ray powder diffraction techniques. They both exhibit orthorhombic superstructures, one with a≈b≈2a_p and c≈3a_p (S.G.: Pb2n or Pbmn) for the Sr-based compound and one with a≈b≈2a_p and c≈8a_p (S.G.: B222, Bmm2, B2mm or Bmmm) for the Ca-based one. The high-resolution transmission electron microscopy (HRTEM) images evidence the existence of one deficient [FeO_x]_∞ layer, suggesting that Bi_1/3Sr_2/3FeO_2.67 and Bi_1/2Ca_1/2FeO_2.75 behave differently compared to their Ln-based homolog. The HAADF-STEM images allow to propose a model of cation ordering on the A sites of the perovskite. The Mössbauer analyses confirm the trivalent state of iron and its complex environment with three types of coordination. Both compounds exhibit a high value of resistivity and the inverse molar susceptibility versus temperature curves evidence a magnetic transition at about 730 K for the Bi_1/3Sr_2/3FeO_2.67 and a smooth reversible transition between 590 and 650 K for Bi_1/2Ca_1/2FeO_2.75.     

Solid solubility and phase transitions in the system LaNb1−xTaxo4

The solid solubility between LaNbO₄ and LaTaO₄ was investigated by X-ray diffraction, and a two-phase region was observed in the composition region LaNb_1−xTa_xO₄ where 0.4?x?0.8. Single-phase LaNb_1−xTa_xO₄ (0?x?0.4) with the monoclinic Fergusonite structure at ambient temperature, was observed to transform to a tetragonal Scheelite structure by in-situ high-temperature X-ray diffraction, and the phase transition temperature was shown to increase with increasing Ta-content. This ferroelastic to paraelastic second-order phase transition was described by Landau theory using spontaneous strain as an order parameter. The thermal expansion of LaNb_1−xTa_xO₄ (0?x0.4) was shown to be significantly higher below the phase transition than above. Single-phase LaNb_1−xTa_xO₄ (0.8?x?1) with another monoclinic crystal structure at ambient temperature was shown to transform to an orthorhombic crystal structure by X-ray diffraction and differential scanning calorimetry. The phase transition temperature was observed to decrease with decreasing Ta-content. Finally, orthorhombic LaTaO₄ could also be transformed to monoclinic LaTaO₄ at ambient temperature by applying a uniaxial pressure of 150-170 MPa, reflecting the lower molar volume of monoclinic LaTaO₄.     

Phase segregation in the Gd1−xSrxFeO3−δ series

Gd_1−xSr_xFeO_3−δ ferrites have been studied by means of X-ray powder diffraction in the whole composition range. Single-phase solid solution is found for x<0.09 and for x>0.63. At intermediate Sr content, phase segregation takes place. Compounds with x?0.05 crystallize in the orthorhombic structure, space group Pbnm. Oxygen-deficient Gd_1−xSr_xFeO_3−δ with x?2/3 are cubic or nearly cubic. The oxygen vacancies stabilize the cubic phase for x=2/3 whereas highly oxidized samples show an orthorhombic distortion, which has not been observed earlier. Magnetic and electrical properties have been measured for the single-phase solid solutions. Gd_1−xSr_xFeO_3−δ compounds with x?2/3 order antiferromagnetically below ∼100 K. In the paramagnetic region, their susceptibility follows the Curie-Weiss law in all but SrFeO_2.96 compound. These ferrites show semiconducting behavior in the electrical transport likely related to atomic disorder. We find that the conductivity activation energy becomes larger by increasing either the Gd content or the oxygen vacancies.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

p-Type electron transport in La1−xSrxFeO3−δ at high temperatures

Electrical conductivity, thermopower and oxygen content were measured for La_1−xSr_xFeO_3−δ (x=0.2, 0.5, 0.9) within the oxygen partial pressure range 10⁻⁴-0.5 atm and at temperatures 750-950 °C. The dominating charge carriers under these experimental conditions are electron holes. The results of oxygen nonstoichiometry measurements are used to estimate the concentration of holes and to analyze data on conductivity and thermopower. The changes in thermopower are described by the model assuming that the number of sites accessible for migration of holes is independent on oxygen content. The mobility of electron holes is calculated, and it is found to be virtually independent on temperature in the compositions with x<0.5 while compositions with x>0.5 exhibit thermally activated mobility and mobility values about 0.1 cm² V⁻¹ s⁻¹ or smaller. It is suggested that the main contribution to the composition dependent variations in electron hole mobility are associated with Coulomb interactions at small x's, whereas at high degrees of doping the mobility of holes is most strongly affected by the increasing amount of oxygen vacancies.     

Electron-poor SrAuxIn4−x (0.5?x?1.2) and SrAuxSn4−x (1.3?x?2.2) phases with the BaAl4-type structure

Solid solutions SrAu_xIn_4−x (0.5?x?1.2) and SrAu_xSn_4−x (1.3?x?2.2) have been prepared at 700 °C and their structures characterized by powder and single-crystal X-ray diffraction. They adopt the tetragonal BaAl₄-type structure (space group I4/mmm, Z=2; SrAu_1.1(1)In_2.9(1), a=4.5841(2) Å, c=12.3725(5) Å; SrAu_1.4(1)Sn_2.6(1), a=4.6447(7) Å, c=11.403(2) Å), with Au atoms preferentially substituting into the apical over basal sites within the anionic network. The phase width inherent in these solid solutions implies that the BaAl₄-type structure can be stabilized over a range of valence electron counts (vec), 13.0-11.6 for SrAu_xIn_4−x and 14.1-11.4 for SrAu_xSn_4−x. They represent new examples of electron-poor BaAl₄-type compounds, which generally have a vec of 14. Band structure calculations confirm that substitution of Au, with its smaller size and fewer number of valence electrons, for In or Sn atoms enables the BaAl₄-type structure to be stabilized in the parent binaries SrIn₄ and SrSn₄, which adopt different structure types.     

Thermochemistry of Li1+xMn2−xO4 (0?x?1/3) spinel

Lithium substituted Li_1+xMn_2−xO₄ spinel samples in the entire solid solution range (0?x?1/3) were synthesized by solid-state reaction. The samples with x<0.25 are stoichiometric and those with x?0.25 are oxygen deficient. High-temperature oxide melt solution calorimetry in molten 3Na₂O·4MoO₃ at 974 K was performed to determine their enthalpies of formation from constituent binary oxides at 298 K. The cubic lattice parameter was determined from least-squares fitting of powder XRD data. The variations of the enthalpy of formation from oxides and the lattice parameter with x follow similar trends. The enthalpy of formation from oxides becomes more exothermic with x for stoichiometric compounds (x<0.25) and deviates endothermically from this trend for oxygen-deficient samples (x?0.25). This energetic trend is related to two competing substitution mechanisms of lithium for manganese (oxidation of Mn³⁺ to Mn⁴⁺ versus formation of oxygen vacancies). For stoichiometric spinels, the oxidation of Mn³⁺ to Mn⁴⁺ is dominant, whereas for oxygen-deficient compounds both mechanisms are operative. The endothermic deviation is ascribed to the large endothermic enthalpy of reduction.     

Synthesis of silicated hydroxyapatite Ca10(PO4)6−x(SiO4)x(OH)2−x

The preparation of silicated hydroxyapatite Ca₁₀(PO₄)_6−x(SiO₄)_x(OH)_2−x (SiHA) with 0?x?2 was investigated using a wet precipitation method followed by a heat treatment. X-ray diffraction and Rietveld refinement, Fourier transformed IR (FTIR) spectroscopy, elemental analyses, transmission electron microscopy and thermal analyses were used to characterize the samples. The raw materials were composed of a partially silicated and carbonated apatite and a secondary minor phase containing the excess silicon. Single phase silicated hydroxyapatites, with 0?x?1, could be synthesized after a thermal treatment of the raw powders above 700 °C. The presence of carbonate groups in the raw apatite played an important role in the incorporation of silicates during heating. From the different results, the mechanisms of formation of SiHA are discussed.