Functionalized carbon nanotubes and nanofibers for biosensing applications

This review summarizes recent advances in electrochemical biosensors based on carbon nanotubes (CNTs) and carbon nanofibers (CNFs) with an emphasis on applications of CNTs. CNTs and CNFs have unique electric, electrocatalytic and mechanical properties, which make them efficient materials for developing electrochemical biosensors.We discuss functionalizing CNTs for biosensors. We review electrochemical biosensors based on CNTs and their various applications (e.g., measurement of small biological molecules and environmental pollutants, detection of DNA, and immunosensing of disease biomarkers). Moreover, we outline the development of electrochemical biosensors based on CNFs and their applications. Finally, we discuss some future applications of CNTs.     

Functionalization of multi-walled carbon nanotubes by epoxide ring-opening polymerization

In this study, covalent functionalization of carbon nanotubes (CNTs) was accomplished by surface-initiated epoxide ring-opening polymerization. FT-IR spectra showed that polyether and epoxide group covalently attached to the sidewalls of CNTs. TGA results indicated that the polyether was successfully grown from the CNT surface, with the final products having a polymer weight percentage of ca. 14-74 wt%. The O/C ratio of CNTs increased significantly from 5.1% to 29.8% after surface functionalization of CNTs. SEM and TEM images of functionalized CNTs exhibited that the tubes were enwrapped by polymer chains with thickness of several nanometers, forming core-shell structures with CNTs at the center.     

Azide-functionalization of carbon nanotubes by electrochemical oxidation of N3- in situ

Azide-functionalization of single-walled carbon nanotubes （SWCNTs） was achieved by electrochemical oxidation of N3 in situ. The functionalized nanotubes were characterized in details by single internal reflection infrared spectroscopy （ATR-FTIR） and thermogravimetic analysis （TGA/MS）. The results revealed that a covalent C-N bond had formed and this might provide an effective method for the preparation of azide-functionalized materials, especially carbon materials. The degree of functionaliza- tion was measured by X-ray photoelectron spectroscopy （XPS）.     

An ultrasensitive streptavidin-functionalized carbon nanotubes platform for chemiluminescent immunoassay

An ultrasensitive chemiluminescent (CL) immunoassay system was developed for the detection of tumor marker. This sandwich CL assay method was for the first time designed based on a highly efficient streptavidin-functionalized multi-walled carbon nanotubes (MWCNTs) platform. The glass slide was firstly silylanized with 3-gycidoxypropyltrimethoxysilane (GPTMS) to generate surface epoxy group functionality. Subsequently, the MWCNTs/chitosan solution was mixed with streptavidin solution, and a certain amount of the resulting suspension was dropped on the surface of the epoxy-activated glass substrate to form a firm streptavidin-functionalized MWCNTs platform. The biofunctionalized-MWCNTs platform shows large reactive surface area and excellent biocompatibility. The capture antibody can be efficiently immobilized on the biosensing platform surface based on the highly selective recognition of streptavidin to biotinylated antibody. Using α-fetoprotein (AFP) as model analyte, the proposed method exhibits wide linear range of 0.001–0.1 ng mL⁻¹ with a low detection limit down to 0.52 pg mL⁻¹. The CL immunoassay system displays 7.9-fold increase in the detection sensitivity compared to the immunosensor without using MWCNTs. Moreover, the resulting immunosensor demonstrates excellent specificity, good reproducibility, and acceptable stability. This streptavidin-functionalized MWCNTs platform opens a novel and promising avenue for fabricating ultrasensitive CL immunoassay system.     

Coordination and organometallic compounds in the functionalization of carbon nanotubes

Various methods for functionalization of carbon nanotubes (CNTs) using classic coordination complexes, as well as organometallic compounds as precursors, are discussed. CNTs can form hybrids via covalent or non-covalent interaction with metal complexes of crown ethers, carboxylates, amines, polypyridyl compounds, a host of N,O-containing ligands, derivatives of phosphonic acid, porphyrins, phthalocyanines, carbonyls, cyclopentadienyls, pyrene-containing moieties, and other aromatic structures. Several applications of synthesized composites/hybrids are emphasized.     

Functionalization as a way to enhance dispersion of carbon nanotubes in matrices: a review

The past 3 decades of thorough scientific scrutiny of carbon nanotubes (CNTs) revealed that, in spite of their remarkable properties, some technological applications are adversely affected by certain difficulties in handling the CNTs, along with their tendencies, arising out of their graphitic structure, to form agglomerates and exhibit limited interaction with other materials. These issues play a crucial role when CNTs are applied as nanofillers inside matrices, in particular polar ones. In this case, unless several preliminary steps are taken, an efficient and uniform dispersion of the CNTs becomes impossible, thus the nanocomposite cannot exhibit the expected final properties. Unfortunately, a universal procedure does not exist since the problem of the dispersion of CNTs is very complex, and its solution requires an advanced understanding of the properties of the CNTs (e.g. whether the CNTs are single- or multiwalled, size, length, lattice defects etc.) as well as of the matrices used. This review aims to help the reader to select the appropriate dispersion procedure by acquiring fundamental knowledge regarding: (1) the synthesis and properties of pristine CNTs; (2) methods of chemical functionalization and properties of functionalized CNTs; and (3) methodologies for the mechanical dispersion of CNTs. A brief overview regarding chemo-physical characterization techniques is also given to enable a better evaluation of the properties of the CNTs, both before and after functionalization.     

Structural and electronic characteristics of perhydrogenated carbon nanotubes

The structural and electronic characteristics of fully hydrogenated armchair and zigzag carbon nanotubes have been determined by quantum chemical methods. With use of line group symmetries, the structures of nanotubes up to 10 nm in diameter could be optimized by periodic B3LYP calculations. “In–out” isomerism is shown to significantly stabilize perhydrogenated carbon nanotubes, the energetically most favorable structures being those with 1/3–1/2 of the carbon atoms endo-hydrogenated. In favored nanotubes the ratio of endo- to exo-hydrogens is 1:1, the stabilities increasing as a function of the diameter of the nanotube. The calculated band gaps indicate that the perhydrogenated carbon nanotubes are insulators.     

L-酪氨酸功能化多壁碳纳米管的制备及表征

采用L-酪氨酸作为修饰剂，制备了一种新型功能化的多壁碳纳米管，并对其进行了表征。红外光谱和电化学实验均证实碳纳米管和酪氨酸是通过酰胺键共价键合的。其中，循环伏安实验中0．22V处羧基峰的消失与红外光谱中1717cm^-1处N-酰化氨基酸的-C=O峰相对应，2931和2860cm^-1处的-CH2-的伸缩振动峰的出现证明了产物的形成。     

The conversion of polyaniline nanotubes to nitrogen-containing carbon nanotubes and their comparison with multi-walled carbon nanotubes

Polyaniline (PANI) nanotubes were prepared by the oxidation of aniline in solutions of acetic or succinic acid, and subsequently carbonized in a nitrogen atmosphere during thermogravimetric analysis running up to 830 °C. The nanotubular morphology of PANI was preserved after carbonization. The molecular structure of the original PANI and of the carbonized products has been analyzed by FTIR and Raman spectroscopies. Carbonized PANI nanotubes contained about 8 wt.% of nitrogen. The molecular structure, thermal stability, and morphology of carbonized PANI nanotubes were compared with the properties of commercial multi-walled carbon nanotubes.     

丙酮-二正丁胺滴定法测定聚氨酯中的异氰酸酯基

采用丙酮代替甲苯和异丙醇作溶剂, 采用二正丁胺滴定法测定聚氨酯中的异氰酸酯基. 用改进方法对样品测定结果的相对标准偏差为0.35%～0.48%, 加标回收率为95.07%～102.30%. FTIR跟踪实验表明, 丙酮作为溶剂可以在体系中稳定存在至少1 d以上, 完全可以满足相关分析的需要. 与传统的甲苯-二正丁胺滴定法的对比实验表明, 本方法准确、简便, 有效降低了实验成本.     

电位质子滴定与NEXAFS和XPS表征功能化多壁碳纳米管比较(英文)

Since the discovery of carbon nanotubes (CNT), this material has been recognized as an attractive catalyst support. CNT must be functionalized before use as a catalyst support and typically this involves oxidation. However, the functional group distribution on the CNT is very complex mixture of groups and varies with oxidation agent used. Here a simple acid-base titration is introduced to characterize the oxygen functionalized CNT. By comparing characterization with near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for both at the C and O K-edges, it can be demonstrated that potentiometric proton titration can be a fast and quantitative analysis for Brnsted acid functional groups on CNT.     

含Fe、Co、Ni的LDHs为催化剂前体生长碳纳米管

分别以具有相似Fe、Co、Ni含量的层状双金属氢氧化物（LDHs）为催化剂前体,用化学气相沉积的方法生长碳纳米管（CNTs）。 催化剂由LDHs焙烧还原得到。 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）及拉曼光谱（Raman）测试技术对LDHs及其焙烧产物的结构、CNTs的形貌和结构进行了研究。 结果表明,3种催化剂生长的CNTs均为多壁结构;其中Co催化剂活性较低,生长CNTs的管径较细、石墨化程度较高;Ni催化剂的活性较高,生长CNTs的密度较大、管壁较厚、石墨化程度较差;Fe催化剂的活性介于Co和Ni之间。 催化剂活性及CNTs的密度可以由生长CNTs的结构来解释。     

Functionalization of gold and carbon nanostructured materials using gamma-ray irradiation

Gold nanoparticles were successfully attached to the surface sites of carbon nanotubes (CNT). Both nanostructured materials were functionalized by λ-ray irradiation without chemical treatments for creating active sites. UV–visible absorption spectra of the un-irradiated and gamma ray-irradiated nanomaterials are also studied. The absorption spectrum of the irradiated CNT shows a new strong peak located at 700 nm, which might act as the active site on the surface of CNT, the result being an attachment of gold nanoparticles. This approach provides an efficient method to attach other nanostructures to carbon nanotubes for using them in different applications such as medicine and synthesis of catalytic materials.     

Amino-functionalized carbon nanotubes as nucleophilic scavengers in solution phase combinatorial synthesis

A versatile method for fast scavenging a variety of electrophiles using carbon nanotubes functionalized by amino groups (CNT-NH₂) is reported. Following the scavenging event, CNT-NH₂ can be easily separated from the reaction mixture by filtration, leaving the desired products in excellent yields and purities.     

Tip-enhanced near-field optical microscopy of carbon nanotubes

We review recent experimental studies on single-walled carbon nanotubes on substrates using tip-enhanced near-field optical microscopy (TENOM). High-resolution optical and topographic imaging with sub 15 nm spatial resolution is shown to provide novel insights into the spectroscopic properties of these nanoscale materials. In the case of semiconducting nanotubes, the simultaneous observation of Raman scattering and photoluminescence (PL) is possible, enabling a direct correlation between vibrational and electronic properties on the nanoscale. So far, applications of TENOM have focused on the spectroscopy of localized phonon modes, local band energy renormalizations induced by charge carrier doping, the environmental sensitivity of nanotube PL, and inter-nanotube energy transfer. At the end of this review we discuss the remaining limitations and challenges in this field. Figure Tip-enhanced Raman scattering and photoluminescence spectroscopy with sub 15 nm spatial resolution provides novel insights into the electronic and vibronic properties of single-walled carbon nanotubes.     

Electrochemical sensor for amino acids and albumin based on composites containing carbon nanotubes and copper microparticles

This work reports on the analytical performance of composites obtained by dispersing copper microparticles and multi-wall carbon nanotubes within a mineral oil binder (CNTPE-Cu) for the determination of amino acids and albumin. The strong complexing activity of amino acids towards copper makes possible an important improvement in the sensitivity for the determination of amino acids and albumin. This new electrode permits the highly sensitive amperometric detection of amino acids, even the non-electroactive ones, at very low potentials (0.000 V) and physiological pH (phosphate buffer solution pH 7.40). The response of the electrode is highly dependent on the amount of copper, demonstrating the crucial role of the metal in the analytical performance of the sensor. The best analytical performance is obtained for the electrode containing 6.0% (w/w) copper. The resulting sensor shows a fast response (7 s) and a sensitivity that depends on the nature of the amino acid. The electrode surface demonstrates an excellent resistance to surface fouling, with R.S.D. of 4% for the sensitivities of 10 successive calibration plots. Albumin is determined with CNTPE-Cu using a protocol based on the accumulation of the protein for 10 min at −0.100 V, followed by the square-wave voltammetric analysis. The quantification of albumin concentration in lyophilized control serum gives excellent agreement with the classical spectrophotometric methodology and with the value informed for the supplier.     

Predominating stable adsorption and direct electrochemistry of glucose oxidase on carbon nanotubes by oxygen-containing groups

Stable adsorption and direct electrochemistry of glucose oxidase (GOx) occurred on nitric acid (HNO3)-treated multi-walled carbon nanotubes (MWNTs) instead of as-received MWNTs, demonstrating the critical roles of oxygen-containing groups in stableadsorption and direct electrochemistry of GOx on carbon nanotubes (CNTs).     

Flexible supercapacitors based on carbon nanotubes

This review provides an overview of recent progress towards the development of flexible supercapacitors based on macroscopic carbon nanotubes-based electrodes, including one-dimensional (1D) fibers, 2D films, and 3D foams, with a focus on electrode preparation and configuration design as well as their integration with other multifunctional devices.     

Polymer/carbon nanotube nanocomposites: Influence of carbon nanotubes on EVA photodegradation

The influence of carbon nanotubes on the photodegradation of EVA/carbon nanotube nanocomposites was studied by irradiation under photooxidative conditions (at λ > 300 nm, at 60 °C and in the presence of oxygen). The influence of the nanotubes on both the photooxidation mechanism of EVA and the rates of oxidation of the matrix was characterized on the basis of infrared analysis. On one hand, it was shown that the carbon nanotubes act as inner filters and antioxidants, which contribute to reduction in the rate of photooxidation of the polymeric matrix. On the other hand, it was shown that light absorption could provoke an increase in the local temperature and then induce the photooxidation of the polymer. The competition between these three effects determines the global rate of photooxidation of the polymeric matrix. Several factors are involved, the concentration of the carbon nanotubes, the morphology of the nanotubes and the functionalization of the nanotube surface.