Yb3CoSn6 and Yb4Mn2Sn5: New polar intermetallics with 3D open-framework structures

Two new ternary ytterbium transition metal stannides, namely, Yb₃CoSn₆ and Yb₄Mn₂Sn₅, have been obtained by solid-state reactions of the corresponding pure elements in welded tantalum tubes at high temperature. Their crystal structures have been established by single-crystal X-ray diffraction studies. Yb₃CoSn₆ crystallizes in the orthorhombic space group Cmcm (no. 63) with cell parameters of a=4.662(2), b=15.964(6), c=13.140(5) Å, V=978.0(6) Å³, and Z=4. Its structure features a three-dimensional (3D) open-framework composed of unusual [CoSn₃] layers interconnected by zigzag Sn chains, forming large tunnels along the c-axis which are occupied by the ytterbium cations. Yb₄Mn₂Sn₅ is monoclinic space group C2/m (no. 12) with cell parameters of a=16.937(2), b=4.5949(3), c=7.6489(7) Å, β=106.176(4)°, V=571.70(8) Å³, and Z=2. It belongs to the Mg₅Si₆ structure type and its anionic substructure is composed of parallel [Mn₂Sn₂] ladders interconnected by unusual zigzag [Sn₃] chains, forming large tunnels along the c-axis, which are filled by the ytterbium cations. Band structure calculations based on density function theory methods were also made for both compounds.     

Yb5Ni4Sn10 and Yb7Ni4Sn13: New polar intermetallics with 3D framework structures

The title compounds have been obtained by solid state reactions of the corresponding pure elements at high temperature, and structurally characterized by single-crystal X-ray diffraction studies. Yb₅Ni₄Sn₁₀ adopts the Sc₅Co₄Si₁₀ structure type and crystallizes in the tetragonal space group P4/mbm (No. 127) with cell parameters of a=13.785(4) Å, c=4.492 (2) Å, V=853.7(5) Å³, and Z=2. Yb₇Ni₄Sn₁₃ is isostructural with Yb₇Co₄InGe₁₂ and crystallizes in the tetragonal space group P4/m (No. 83) with cell parameters of a=11.1429(6) Å, c=4.5318(4) Å, V=562.69(7) Å³, and Z=1. Both structures feature three-dimensional (3D) frameworks based on three different types of one-dimensional (1D) channels, which are occupied by the Yb atoms. Electronic structure calculations based on density functional theory (DFT) indicate that both compounds are metallic. These results are in agreement with those from temperature-dependent resistivity and magnetic susceptibility measurements.     

Synthesis and characterization of quaternary chalcogenides InSn2Bi3Se8 and In0.2Sn6Bi1.8Se9

Quaternary chalcogenides InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ were synthesized on direct combination of their elements in stoichiometric ratios at T>800 °C under vacuum. Their structures were determined with X-ray diffraction of single crystals. InSn₂Bi₃Se₈ crystallizes in monoclinic space group C2/m (No. 12) with a=13.557(3) Å, b=4.1299(8) Å, c=15.252(3) Å, β=115.73(3)°, V=769.3(3) Å³, Z=2, and R₁/wR₂/GOF=0.0206/0.0497/1.092; In_0.2Sn₆Bi_1.8Se₉ crystallizes in orthorhombic space group Cmc2₁ (No. 36) with a=4.1810(8) Å, b=13.799(3) Å, c=31.953(6) Å, V=1843.4(6) Å³, Z=4, and R₁/wR₂/GOF=0.0966/0.2327/1.12. InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ are isostructural with CuBi₅S₈ and Bi₂Pb₆S₉ phases, respectively. The structures of InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ feature a three-dimensional framework containing slabs of NaCl-(311) type with varied thicknesses. Calculations of the electronic structure and measurements of electrical conductivity indicate that these materials are semiconductors with narrow band gaps. Both compounds show n-type semiconducting properties with Seebeck coefficients −270 and −230 μV/K at 300 K for InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉, respectively.     

Synthesis, crystal and electronic structure, and physical properties of the new lanthanum copper telluride La3Cu5Te7

The new lanthanum copper telluride La₃Cu_5−xTe₇ has been obtained by annealing the elements at 1073 K. Single-crystal X-ray diffraction studies revealed that the title compound crystallizes in a new structure type, space group Pnma (no. 62) with lattice dimensions of a=8.2326(3) Å, b=25.9466(9) Å, c=7.3402(3) Å, V=1567.9(1) Å³, Z=4 for La₃Cu_4.86(4)Te₇. The structure of La₃Cu_5−xTe₇ is remarkably complex. The Cu and Te atoms build up a three-dimensional covalent network. The coordination polyhedra include trigonal LaTe₆ prisms, capped trigonal LaTe₇ prisms, CuTe₄ tetrahedra, and CuTe₃ pyramids. All Cu sites exhibit deficiencies of various extents. Electrical property measurements on a sintered pellet of La₃Cu_4.86Te₇ indicate that it is a p-type semiconductor in accordance with the electronic structure calculations.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Formation and structural refinements of tunneled intergrowth phases in the Ga2O3-In2O3-SnO2-TiO2 system

Over 100 samples were prepared as (Ga,In)₄(Sn,Ti)_n−4O_2n−2, n=6, 7, and 9 by solid-state reaction at 1400 °C and characterized by X-ray diffraction. Nominally phase-pure beta-gallia-rutile intergrowths were observed in samples prepared with n=9 (0.17?x?0.35 and 0?y?0.4) as well as in a few samples prepared with n=6 and 7. Rietveld analysis of neutron time-of-flight powder diffraction data were conducted for three phase-pure samples. The n=6 phase Ga_3.24In_0.76Sn_1.6Ti_0.4O₁₀ is monoclinic, P2/m, with Z=2 and a=11.5934(3) Å, b=3.12529(9) Å, c=10.6549(3) Å, β=99.146(1)°. The n=7 phase Ga_3.24In_0.76Sn_2.4Ti_0.6O₁₂ is monoclinic, C2/m, with Z=2 and a=14.2644(1) Å, b=3.12751(2) Å, c=10.6251(8) Å, β=108.405(1)°. The n=9 phase Ga_3.16In_0.84Sn₄TiO₁₆ is monoclinic, C2/m, with Z=2 a=18.1754(2) Å, b=3.13388(3) Å, c=10.60671(9) Å, β=102.657(1)°. All of the structures are similar in that they possess distorted hexagonal tunnels parallel to the [010] vector.     

Designing and tuning properties of a three-dimensional porous quaternary chalcogenide built on a bimetallic tetrahedral cluster [M4Sn3S13] (M=Zn/Sn)

A multifunctional three-dimensional quaternary chalcogenide [Na₅Zn_3.5Sn_3.5S₁₃]·6H₂O has been synthesized by solvothermal reactions. [Na₅Zn_3.5Sn_3.5S₁₃]·6H₂O represents an interesting example of metal chalcogenides that combines semiconductivity, porosity, and light emission in a single structure. It crystallizes in the cubic space group Fm-3c, a=17.8630(3) Å, V=5699.85(17) Å³, Z=8. The compound decomposes at ∼450 °C. A band gap of 2.9 eV is estimated from the optical diffuse reflectance data. A strong photoluminescence peak is observed at 2.43 eV in Mn doped samples. The electronic and optical properties of this compound can be systematically tuned by substitution of metal and chalcogen elements.     

High-pressure synthesis and structural characterization of three new polyphosphides, α-SrP3, BaP8, and LaP5

Three novel metal polyphosphides, α-SrP₃, BaP₈, and LaP₅, were prepared in BN crucibles by the reaction of the respective stoichiometric mixtures under a high pressure of 3 GPa at 950-1000°C. Their crystal structures were determined from single-crystal X-ray data (α-SrP₃: space group C2/m, a=9.199(6) Å, b=7.288(3) Å, c=5.690(3) Å, β=113.45(4)°, Z=4, R₁/wR₂=0.0684/0.1180 for 471 observed reflections and 22 variables; BaP₈: space group P−1, a=6.762(2) Å, b=7.233(2) Å, c=8.567(2) Å, α=86.32(2)°, β=84.31(2)°, γ=70.40(2)°, Z=2, R₁/wR₂=0.0476/0.1255 for 2702 observed reflections and 82 variables; LaP₅: space group P2₁/m, a=4.885(1) Å, b=9.673(3) Å, c=5.577(2) Å, β=105.32(2)°, Z=2, R₁/wR₂=0.0391/0.1034 for 1272 observed reflections and 31 variables). α-SrP₃ is isostructural with SrAs₃ and the crystal structure consists of two-dimensional puckered polyanionic layers _∞²[P₃]²⁻ that stack along the c-axis yielding channels occupied by Sr²⁺ counterions. BaP₈ crystallizes in a new structure type which contains a three-dimensional infinite polyanionic framework _∞³[P₃]²⁻, with large channels hosting the barium cations. LaP₅ is a layered compound containing _∞²[P₅]³⁻ polyanionic layers separated by La³⁺ ions. All three compounds exhibit expected diamagnetic behaviors.     

Flux growth of a new cobalt-zinc-tin ternary phase Co7+xZn3−xSn8 and its relationship to CoSn

The intermetallic compound Co_7+xZn_3−xSn₈ (−0.2<x<0.2) forms from the reaction of cobalt in zinc/tin eutectic flux. This phase has a new structure type in orthorhombic space group Cmcm, with unit cell parameters a=4.138(1) Å, b=12.593(4) Å, and c=11.639(4) Å (Z=2; R₁=0.0301). Varying the amount of cobalt in the synthesis leads to formation of a superstructure in space group Pnma, with lattice parameters a=12.5908(2) Å, b=11.6298(3) Å, and c=8.2704(2) Å (Z=4; R₁=0.0347). A Co/Zn mixed site and a partially occupied Co site in the Cmcm structure order to form the Pnma supercell. TGA/DSC studies indicate that the binary phase CoSn initially forms in the flux at 1173 K, and then reacts with the zinc in the cooling solution to form the ternary structure at 823 K. This phase exhibits Pauli paramagnetic behavior.     

Synthesis, crystal structure, and nonlinear optical properties of Bi2Cu5B4O14

Bi₂Cu₅B₄O₁₄ crystallizes in the noncentrosymmetric triclinic space group P1 (No. 1) with cell parameters a=10.1381(11) Å, b=9.3917(11) Å, c=3.4566(4) Å, α=105.570(2)°, β=92.275(2)°, γ=107.783(2)°, Z=1 and R₁=0.0401 and wR₂=0.0980. It is a layered structure that is built up from sheets of rectangular CuO₄ and trigonal BO₃ groups. The sheets are connected by infinite chains of edge shared BiO₆ polyhedra that intersect the bc plane at an angle slightly greater than 90°. The second-harmonic generation efficiency of Bi₂Cu₅B₄O₁₄, using 1064 nm radiation, is about one half times that of KH₂PO₄.     

Networks of icosahedra in the sodium-zinc-stannides Na16Zn13.54Sn13.46(5), Na22Zn20Sn19(1), and Na34Zn66Sn38(1)

The three new ternary phases Na₁₆Zn_13.54Sn_13.46(5) (I), Na₂₂Zn₂₀Sn₁₉₍₁₎ (II), and Na₃₄Zn₆₆Sn₃₈₍₁₎ (III) were obtained by direct fusion of the pure elements and characterized by single crystal X-ray diffraction experiments: I, Ibam, Z=8, a=27.401(1), b=16.100(1), c=18.431(1) Å, R₁/wR₂ (all data)=0.051/0.088; II, Pnma, Z=4, a=16.403(1), b=15.598(1), c=22.655(6) Å, R₁/wR₂ (all data)=0.038/0.071; III, R3¯m, Z=3, a=16.956(1), c=36.861(1) Å, R₁/wR₂ (all data)=0.045/0.092. The structures consist of complex 3D cluster networks made of Zn and Sn atoms with the common motif of Kagomé nets of icosahedra. Additionally to the new heteroatomic {Zn_12−xSn_x} icosahedra that are omnipresent, triangular units, cages, and pairs of triply fused icosahedra fill the cavities of the Kagomé nets in compounds I, II, and III, respectively. Whereas I crystallizes in a new structure type, II and III have structural analogs in trielide chemistry. All three compounds closely approach the electron numbers expected for valence compounds according to the extended 8-N rule. The concept of achieving an isovalent situation to triel elements by combination of electron poorer and richer elements and the readily mixing of Zn and Sn allow the formation of icosahedral and triangular clusters without the participation of a group 13 element.     

V2Cu3Ga8, Mo2Cu3Ga8 and W2Cu3Ga8—New compounds with a novel order variant of a bcc packing and motifs of self-similarity

Single crystals of the new compounds TM₂Cu₃Ga₈ (TM=V, Mo, W) were synthesised from the elements. Structure determinations of the isotypic compounds (cI104, space group , Z=8; Mo₂Cu₃Ga₈: a=11.9171(10) Å, 613 refl., 23 param., R₁(F)=0.022, wR₂(F²)=0.047; W₂Cu₃Ga₈: 11.9248(8) Å, 346 refl., 23 param., R₁(F)=0.048, wR₂(F²)=0.086; V₂Cu₃Ga₈: 11.7861(14) Å, 374 refl., 24 param., R₁(F)=0.033, wR₂(F²)=0.081) showed a new cubic structure type which can be classified as an ordered defect variant of a bcc packing with a^′=4a: [(TM)₂(Cu)₃(□)₃][Ga₈]. The coordination polyhedra of the transition metals consist of Ga₈-cubes with 3 sides capped by Cu leading to coordination number 11. The arrangement of the TMGa₈Cu₃-polyhedra is in a way they form itself a 3-fold capped cube. All compositions were confirmed by EDX measurements.     

Synthesis, crystal structures, magnetic and electric transport properties of Eu11InSb9 and Yb11InSb9

Two new rare-earth metal containing Zintl phases, Eu₁₁InSb₉ and Yb₁₁InSb₉ have been synthesized by reactions of the corresponding elements in molten In metal to serve as a self-flux. Their crystal structures have been determined by single crystal X-ray diffraction—both compounds are isostructural and crystallize in the orthorhombic space group Iba2 (No. 45), Z=4 with unit cell parameters a=12.224(2) Å, b=12.874(2) Å, c=17.315(3) Å for Eu₁₁InSb₉, and a=11.7886(11) Å, b=12.4151(12) Å, c=16.6743(15) Å for Yb₁₁InSb₉, respectively (Ca₁₁InSb₉-type, Pearson's code oI84). Both structures can be rationalized using the classic Zintl rules, and are best described in terms of discrete In-centered tetrahedra of Sb, [InSb₄]⁹⁻, isolated Sb dimers, [Sb₂]⁴⁻, and isolated Sb anions, Sb³⁻. These anionic species are separated by Eu²⁺ and Yb²⁺ cations, which occupy the empty space between them and counterbalance the formal charges. Temperature-dependent magnetic susceptibility and resistivity measurements corroborate such analysis and indicate divalent Eu and Yb, as well as poorly metallic behavior for both Eu₁₁InSb₉ and Yb₁₁InSb₉. The close relationships between these structures and those of the monoclinic α-Ca₂₁Mn₄Sb₁₈ and Ca₂₁Mn₄Bi₁₈ are also discussed.     

Synthesis, structure and properties of new chain cuprates, Na3Cu2O4 and Na8Cu5O10

Na₃Cu₂O₄ and Na₈Cu₅O₁₀ were prepared via the azide/nitrate route from stoichiometric mixtures of the precursors CuO, NaN₃ and NaNO₃. Single crystals have been grown by subsequent annealing of the as prepared powders at 500 °C for 2000 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structures (Na₃Cu₂O₄: P2₁/n, Z=4, a=5.7046(2), b=11.0591(4), c=8.0261(3) Å, β=108.389(1)°, 2516 independent reflections, R₁(all)=0.0813, wR₂ (all)=0.1223; Na₈Cu₅O₁₀: Cm, Z=2, a=8.228(1), b=13.929(2), , β=111.718(2)°, 2949 independent reflections, R₁(all)=0.0349, wR₂ (all)=0.0850), the main feature of both crystal structures are CuO₂ chains built up from planar, edge-sharing CuO₄ squares. From the analysis of the Cu-O bond lengths, the valence states of either +2 or +3 can be unambiguously assigned to each copper atom. In Na₃Cu₂O₄ these ions alternate in the chains, in Na₈Cu₅O₁₀ the periodically repeated part consists of five atoms according to Cu^II-Cu^II-Cu^III-Cu^II-Cu^III. The magnetic susceptibilities show the dominance of antiferromagnetic interactions. At high temperatures the compounds exhibit Curie-Weiss behaviour (Na₃Cu₂O₄: , , Na₈Cu₅O₁₀: , , magnetic moments per divalent copper ion). Antiferromagmetic ordering is observed to occur in these compounds below 13 K (Na₃Cu₂O₄) and 24 K (Na₈Cu₅O₁₀).     

Structural and physical properties of the new intermetallic compound Yb3Pd2Sn2

The crystal structure of the ternary intermetallic compound Yb₃Pd₂Sn₂ has been determined ab initio from powder X-ray diffraction data. The compound crystallizes as a new structure type in the orthorhombic space group Pbcm and lattice constants a=0.58262(3), b=1.68393(8), c=1.38735(7) nm. Yb₃Pd₂Sn₂ is composed of a complex _∞[Pd₂Sn₂]^δ− polyanionic network in which the Yb ions are embedded. A comparison between this structure and those of Eu₃Pd₂Sn₂ and Ca₃Pd₂Sn₂, other novel polar intermetallic compounds, was made. DC susceptibility and ¹⁷⁰Yb Mössbauer spectroscopic measurements indicate a close-to divalent Yb behavior. Moreover, a hybridization between 4f and conduction electrons is suggested by electronic structure calculations and heat capacity measurements.     

High-pressure high-temperature synthesis and crystal structure of the isotypic rare earth (RE)-thioborate-sulfides RE9[BS3]2[BS4]3S3, (RE=Dy-Lu)

Application of high-pressure high-temperature conditions (3.5 GPa at 1673 K for 5 h) to mixtures of the elements (RE:B:S=1:3:6) yielded crystalline samples of the isotypic rare earth-thioborate-sulfides RE₉[BS₃]₂[BS₄]₃S₃, (RE=Dy-Lu), which crystallize in space group P6₃ (Z=2/3) and adopt the Ce₆Al_3.33S₁₄ structure type. The crystal structures were refined from X-ray powder diffraction data by applying the Rietveld method. Dy: a=9.4044(2) Å, c=5.8855(3) Å; Ho: a=9.3703(1) Å, c=5.8826(1) Å; Er: a=9.3279(12) Å, c=5.8793(8) Å; Tm: a=9.2869(3) Å, c=5.8781(3) Å; Yb: a=9.2514(5) Å, c=5.8805(6) Å; Lu: a=9.2162(3) Å, c=5.8911(3) Å. The crystal structure is characterized by the presence of two isolated complex ions [BS₃]^3- and [BS₄]^5- as well as [□(S^2-)₃] units.     

Synthesis, crystal structure and magnetic characterization of Na2Cu5(Si2O7)2: An inorganic ferrimagnetic chain

The hydrothermal synthesis, crystal structure and magnetic properties of the new copper silicate Na₂Cu₅(Si₂O₇)₂, are reported. The crystal structure was determined through synchrotron powder diffraction data. The unit cell was indexed to a triclinic cell, space group P-1 (n° 2) with unit cell parameters a=5.71075(2) Å, b=7.68266(3) Å, c=7.96742(3) Å, α=64.2972(2)°, β=88.4860(2)° and γ=70.5958(2)° with Z=1. A structural model was obtained through a combination of a direct-space Monte-Carlo approach and Rietveld refinement. The crystal structure contains parallel chains consisting of zig-zag copper dimers and trimers. All silicon atoms are present as part of a [Si₂O₇]⁶⁻ anion that connects the chains; therefore the compound belongs to the sorosilicate mineral family. The magnetic susceptibility was measured and shows a behavior typical of one-dimensional ferrimagnetism, in agreement with the observed structure.     

Crystal structure and physical properties of the quaternary manganese-bearing pavonite homologue Mn1.34Sn6.66Bi8Se20

The quaternary manganese tin bismuth selenide, Mn_1.34Sn_6.66Bi₈Se₂₀ was synthesized by combining constituent elements at 723 K. Single crystal structure determination revealed that Mn_1.34Sn_6.66Bi₈Se₂₀ is isostructural to the mineral pavonite, AgBi₃S₅, crystallizing in the monoclinic space group C2/m (#12) with a=13.648(3) Å; b=4.175(1) Å; c=17.463(4) Å; β=93.42(3)°. In the structure, two kinds of layered modules, denoted A and B, alternate along [0 0 1]. Module A consists of paired chains of face-sharing monocapped trigonal prisms (around Bi/Sn) separated by a single chain of edge-sharing octahedra (around Mn/Sn). Module B represents a NaCl-type fragment of edge-sharing [(Bi/Sn)Se₆] octahedra. Mn_1.34Sn_6.66Bi₈Se₂₀ is an n-type narrow gap semiconductor with E_g∼0.29 eV. At 300 K, thermopower, electrical conductivity and lattice thermal conductivity values are −123 μV/K, 47 S/cm and 0.6 W/m K, respectively. Mn_1.34Sn_6.66Bi₈Se₂₀ is paramagnetic at high temperatures and undergoes antiferromagnetic transition at T_N=10 K.     

Syntheses and crystal structures of RE3MnSn5−x (RE=Tm, Lu) with 3D Mn-Sn framework

Four new isostructural rare earth manganese stannides, namely RE₃MnSn_5−x (x=0.16(6), 0.29(1) for RE=Tm, x=0.05(8), 0.21(3) for RE=Lu), have been obtained by reacting the mixture of corresponding pure elements at high temperature. Single-crystal X-ray diffraction studies revealed that they crystallized in the orthorhombic space group Pnma (No. 62) with cell parameters of a=18.384(9)-18.495(6) Å, b=6.003(3)-6.062(2) Å, c=14.898(8)-14.976(4) Å, V=1644.3(14)-1679.0(9) Å³ and Z=8. Their structures belong to the Hf₃Cr₂Si₄ type and feature a 3D framework composed of 1D [Mn₂Sn₇] chains interconnected by [Sn₃] double chains via Sn-Sn bonds, forming 1D large channels based on [Mn₄Sn₁₆] 20-membered rings along the b-axis, which are occupied by the rare earth atoms. Electronic structure calculations based on density functional theory (DFT) for idealized “RE₃MnSn₅” model indicate that these compounds are metallic, which are in accordance with the results from temperature-dependent resistivity measurements.