Chemistry of tetravalent actinide phosphates—Part II

The chemistry and crystal structure of tetravalent cation phosphates, including that of actinides was reviewed several times until 1985. Later, new compounds were synthesized and characterized. In more recent studies it was found that some of previously reported phases, especially those of thorium, uranium, and neptunium, were wrongly identified. In the light of these new facts, an update review and classification of tetravalent actinides phosphates is proposed in this two-part paper. Their crystal structure and some chemical properties are compared to non-actinide cation phosphates.     

电流密度对钙磷沉积层组成和结构的影响(英文)

用X射线衍射、激光拉曼光谱以及等离子体原子发射光谱等技术研究了电化学沉积钙磷陶瓷过程中 ,电流密度对电沉积层组成和结构的影响 .实验表明阴极表面得到的沉积物是几种钙磷盐组成的混合物 ,且其成份随电流密度的改变而发生较大的变化 .在电解液温度为 75℃条件下 ,当控制电流密度较低时 ,沉积层主要由CaHPO4· 2H2 O (DCPD)和Ca8H2 (PO4) 6· 5H2 O (OCP)组成 ;随着电流密度的增加 ,阴极表面逐渐生成Ca3 (PO4) 2 ·nH2 O (TCP)和Ca10 (PO4) 6(OH) 2 (HAP) .当电流密度大于 5mA/cm2 时 ,电沉积层的主要成份为羟基磷灰石 (HAP) .     

双环笼状磷酸酯衍生物的合成(Ⅴ)——1-氧代-1-磷杂-2,6,7-三氧杂双环[2,2,2]-4-取代酰基辛烷的合成

本文利用1-氧代-1-磷杂-2,6,7-二氧杂双环[2,2,2]-4-氯甲酰基辛烷3和硫醇、乙二胺、乙醇胺及一些具有生理活性的杂环化合物反应,合成了13种未见文献报道的化合物4_a-n。发现化合物3与8-羟基喹啉作用生成的是水合物。讨论了可能的结构。3与氨作用得到相应的酰胺,合成的化合物均经元素分析、IR和¹HNMR证实其结构。本文还研究了部分化合物的MS裂解规律。对部分化合物的生物活性初测表明,化合物4_j具有良好的杀菌活性,而无明显的杀虫活性。     

Comparative study of layered tetravalent metal phosphates containing various first-row divalent metals. Synthesis, crystalline structure

The transition metal forms of α-zirconium-. titanium-, and hafnium phosphates were prepared by ion exchange method. Their structure was investigated by X-ray powder diffraction (XRPD) method. It was found that the transition metal containing phosphates have the same layered structure as the pristine tetravalent metal phosphates, except for the increase of interlayer distance from 7.6 Å to ～9.5 Å. As a result of the incorporation of transition metals in the layers, the c-axis is increased from ～15 Å to ～20 Å (in the case of titanium phosphate to ～25 Å). All other parameters (a, b and β °) are practically unchanged.      

Thermoanalytical investigation of crystalline layered hafnium salts

Transition metal containing hafnium phosphates forms has layered monoclinic structure. In general these materials have similar route of thermal decomposition; i.e. they loss their crystal water first then at a higher temperature their structural one. At least the result HfP₂O₇ goes through phase change at about 1000 K. In detail among their thermal decomposition some differences occur. The Mn and Zn containing samples have similar behaviour as pure hafnium phosphate. The Cu and Ni containing materials have an additional exo-process connected with the transition metal oxide forms. In case of Co containing sample similar to that of Zn containing one (but very weak) processes were observed.     

骨及生物材料中的纳米磷酸钙

纳米磷酸钙在自然界骨组织的形成过程中起到了关键作用。尽管骨的类型有所不同,但在其初级结构中的无机成分都是纳米磷酸钙。纳米磷酸钙结构能够给予骨良好的机械性能和生物学活性。在生物体中,无机纳米磷酸钙在有机基质的调控下能定向自组装成特定的生物矿物。体外细胞实验显示小尺寸纳米羟基磷灰石更能促进骨髓基质干细胞的增殖,而同尺寸的结晶型纳米磷酸钙则比无定形磷酸钙更能利于干细胞分化。鉴于纳米磷酸钙具有很好的生物相容性和骨诱导性,可以发展成为理想的生物材料常用于骨组织工程和生物医学。     

骨及生物材料中的纳米磷酸钙

纳米磷酸钙在自然界骨组织的形成过程中起到了关键作用。尽管骨的类型有所不同,但在其初级结构中的无机成分都是纳米磷酸钙。纳米磷酸钙结构能够给予骨良好的机械性能和生物学活性。在生物体中,无机纳米磷酸钙在有机基质的调控下能定向自组装成特定的生物矿物。体外细胞实验显示小尺寸纳米羟基磷灰石更能促进骨髓基质干细胞的增殖,而同尺寸的结晶型纳米磷酸钙则比无定形磷酸钙更能利于干细胞分化。鉴于纳米磷酸钙具有很好的生物相容性和骨诱导性,可以发展成为理想的生物材料常用于骨组织工程和生物医学。     

膨胀型环状类磷酸酯蜜胺盐阻燃剂的合成及阻燃聚丙烯的结构与性能

以双季戊四醇、三季戊四醇、多聚磷酸、五氧化二磷和三聚氰胺为原料,合成了膨胀型环状类磷酸酯蜜胺盐阻燃剂,并与聚丙烯共混制成阻燃聚丙烯.红外分析表明该阻燃剂具有环状结构.通过扫描电镜和X射线衍射对阻燃聚丙烯进行了结构分析和表面纹理的表征.实验结果表明：该阻燃剂阻燃性能良好,但在聚丙烯中的分散性较差;用甲基纤维素对该阻燃剂进行表面化学修饰以后,该阻燃剂在聚丙烯中的分散性及阻燃材料的机械性能得到了明显的改善.     

APPLICATIONS OF CERIUM BIS （MONOMYRISTY—LPHOSPHATE）ADSORBENT TO REVERSED PHASE LIQUID CHROMATOGRAPHY

The tetravalent metal salts of monoalkyl phosphates [M(O3POR)2]are a new kind of stationary phases of Chromatography-homogeneous bonded phases.This paper deals with the application of cerium bis(monomyristylphosphate)as support to reversed phase liquid chromatography.The results show that the best mobil phase is CH3CN:H2O=95:5.The good separation to the mixture containing six aromatic hydrocarbons and the determination of naphthalene in a group samples have been achieved.The regression analysis shows that detect limits,linearities and precision for six aromatic hydrocarbons are good.     

Layered Group(IV) Metal Phosphates as Catalysts for MTBE Synthesis

Layered group(IV) metal phosphates and their phenylsulfonic acid derivatives were used as catalysts for the synthesis of methyl tert-butyl ether (MTBE) from methanol and isobutene. Because zirconium and titanium phosphates have only moderate acidic strength, relatively high temperatures are required to activate their Brønsted acidic sites. The optimal activity was obtained at ca. 443 K. Their phenylsulfonic acid derivatives, however, demonstrated higher acidic strength by giving much higher activity toward MTBE formation at relatively low temperaures. The catalysts were characterized in terms of their structure, thermal stability, surface area and acidic strength.     

Synthetic studies on the seven- and eight-membered rings by the intramolecular Nozaki-Hiyama reaction of the allylic phosphates

Synthetic studies on the seven- and eight-membered rings by the intramolecular Nozaki-Hiyama reaction of the allylic phosphates are described. The yield greatly depends on the structure of substrate; however, some complex substrates afforded desired products in high to excellent yield.     

Fourier transform infrared investigations of phosphate-silicate coatings on iron

The influence of silica addition and of the annealing on the structure and properties of phosphate coatings are investigated. It has been observed that silica stabilizes phosphates and reduces the transport of iron towards the surface.     

The Solubilization of Rock Phosphate by Organic Acids

Bases of the production of phosphoric fertilizers are classical methods involving acid dissolution of rock phosphates. The development of new methods applicable both to high-quality and low-quality phosphates is important for solving technological and ecological problems and to increase the economical effectiveness of phosphorus fertilizer technologies. In this respect, the bioconversion of rock phosphates in order to obtain phosphorus fertilizers is very promising. The basic principle of the biotechnological processing of natural phosphates is the production of organic acids, mainly citric, oxalic, and gluconic acid, that attack and dissolve the phosphates, converting the phosphorus to a form utilizable for the plants. The aim of this research is to optimize the process of Tunisian phosphorite solubilization with citric, oxalic, and gluconic acids in relation to the following main factors: the acid concentration, reaction time, solid/liquid phases ratio, and natural phosphate fraction. Two objective functions have been investigated: the quantity of the available acid in the system and the extent of phosphate dissolution. The research data has been processed according to the standard statistical tests. A mathematical model describing the phosphate decomposition process by organic acids has been obtained. A multicriteria optimization has been performed to determine the optimum levels of the examined factors. It was established that the different factors have a different effect on the goal parameters. A maximum degree of 91.89% of phosphorus extraction has been reached at phosphate solubilization by citric acid.     

Fe-based phosphate nanostructures for supercapacitors

Fe-based phosphates with excellent physical and chemical features are potential electrode materials for supercapacitors.In this work,we successfully synthesized Fe-based phosphates with different dimensions,morphologies,and compositions by one-step hydrothermal method.Influence factors on the chemical composition and morphology of the as-prepared materials were explored and the energy storage performance of the as-prepared samples were tested under the traditional three electrode system.Two-dimensional(2 D) iron metaphosphate(Fe(PO_3)_3) showed the best electrochemical performance.For Fe(PO_3)_3 electrode mate rials,the layered structure can provide a larger specific surface area than the bulk structure,which is conducive to the diffusion and transport of electrolyte ions during charging-discha rging and further improve s the rate perfo rmance and cycle stability of supe rcapacito r.2 D Fe(PO_3)_3 and activated carbon were used as electrode materials to construct a 2 D Fe(PO_3)_3//AC supercapacitor.The supercapacitor showed high energy density,high power density,and excellent cycling stability,which indicates 2 D Fe(PO_3)_3 is a promising electrode material for supercapacitors.     

丁基锡炔基膦酸酯的合成

本文合成了１０个新的二（三）丁基锡炔基膦酸酯「（ｎ－（Ｃ４Ｈ９）ｎＳｎ」ｎ－１Ｏ２Ｐ（Ｏ）Ｃ≡ＣＲ（ｎ＝２,３;Ｒ＝ｎ－Ｃ５Ｈ１１,ｎ－Ｃ６Ｈ１３,Ｐｈ,ＣＨ２ＯＭｅ,ＣＨ２ＯＥｔ）通过元素分析,ＩＲ和＾１Ｈ ＮＭＲ确证了其结构。     

Combined Cluster Quantum Chemical MINDO/3 and Ab Initio Study on Zinc Phosphate Structures

Semiempirical MINDO/3 and ab initio calculations were performed to mimic different synthesis routes of zinc phosphates (ZPO) having four-, six- and eight-member ring structures. The Zn/P ratio remained equal to unity while the ZPO followed a strict alternating tetrahedral connectivity. Two different basis sets, i.e., 3-21G* and 6-31G**, were used. It was found that the formation of the ZPO structure is energetically highly favored when the building blocks that compose the structure interacts according to a deep acid–base neutralization. The Lewis acid sites (LAS) formed from the most stable precursor ZPO structure display high activity in binding with Lewis base molecules such as CO. Both the blue-shift of the adsorbed CO stretching mode and its adsorption energy with the LAS shows that the Lewis acidity of ZPO is not less than that of pure ZnO.     

二(三)丁基锡烯基(炔基)膦酸酯的合成与表征

合成了12个新的二(三)丁基锡烯基(炔基)膦酸酯[(n-C4H9)nSn]n-1O2P(0)R,并用元素分析,红外光谱,核磁共振氢谱和TG-DTA对其组成和结构进行了表征,初步生物活性测试表明,有些化合物具有较强的杀螨和杀菌活性。     

High surface area Pd, Pt and Ni ion-exchanged Zr, Ti and Sn(IV) phosphates and their application to selective heterogeneous catalytic hydrogenation of alkenes

Amorphous acidic metal(IV) phosphates of zirconium, titanium and tin have been prepared and hydrogen-exchanged for bivalent Pd, Pt and Ni. These bivalent metals were returned to the zero valent state by reducing them with either hydrogen at 400 °C or with sodium tetrahydroborate at room temperature. The resulting Pd⁰, Pt⁰ and Ni⁰ phosphates were investigated as selective catalysts for heterogeneous hydrogenation of alkenes in solution at normal temperatures and pressures and, for Ni, also in the vapour phase. Quantitative studies on rates of hydrogenation are discussed. The usual methods for preparing metal(IV) phosphates give either crystalline or amorphous solids having low specific surfaces areas. A method has been developed, by which metal(IV) phosphates having large surface areas (lsa) may be prepared easily. These lsa supports take up large amounts of transition metal cations by simple exchange. The enhanced incorporation of Pd, Pt or Ni and increases in surface areas of the phosphate supports have provided some active, selective catalysts. Pd/Ti phosphates were the most active and compared well with commercial Pd on carbon. Ni/Ti phosphate is a very selective catalyst for vapour phase hydrogenation of alkenes and, at slightly higher temperatures, it is an efficient hydrocarbon cracking catalyst.     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

氧化锆层柱磷酸锆的制备及性能

考察了不同制备因素对形成氧化锆层柱磷酸锆的影响,发现适中的锆离子浓度,较低的反应温度及较长的反应时间有利于形成稳定的氧化锆层柱磷酸锆。样品经250℃焙烧后形成较为规整的层柱结构,氧化锆柱与层板间以P-O-Zr键相连,比表面为107～183m^2/g,孔径较集中地为2.5nm。层柱样品表面只存在L酸位,无B酸位。对异丙醇脱水反应和苯甲醛还原反应有较好的反应活性,其比活性优于纯的氧化锆,表明它具有良好的酸催化和酸碱双功能催化作用。