One-dimensional shape-controlled preparation of porous Cu2O nano-whiskers by using CTAB as a template

One-dimensional (1D) cuprite (Cu₂O) nano-whiskers with diameter of 15-30 nm are obtained from liquid deposition method at 25 °C by adding a surfactant, cetyl trimethyl ammonium bromide (CTAB), as a template. TEM and HRTEM show that the nano-whiskers exhibit a well-crystallized 1D structure of more than 200 nm in length, and confirms that the nano-whiskers grow mainly along the 〈111〉 direction. Moreover, there are many pores in the nano-whiskers, which is beneficial for the photocatalysis under visible light. When polyethylene glycol (PEG), glucose and sodium dodecylbenzenesulfonate (SDS) are used as templates, 1D structures cannot be obtained. According to the TEM images of the compound obtained at different stages during the growth of the Cu₂O nano-whiskers, it is found that the role of CTAB is to interact with tiny Cu(OH)₂, which can adsorb OH⁻ and become negative charged, to disperse the tiny Cu(OH)₂ solid and to induce the growth of Cu₂O along the 1D direction. Although CTAB is significant for the preparation of the 1D nanomaterials, ion character of the precursor (Cu(OH)₂·OH⁻ or Cu²⁺) is important as well since there is no nano-whiskers obtained with Cu²⁺ as the precursor. Moreover, the probable mechanism of the formation for the porous structure is discussed.     

Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions

This work reports the preparation of new Cu²⁺ ion-imprinted polymeric nanoparticles using 1-hydroxy-4-(prop-2′-enyloxy)-9,10-anthraquinone (AQ) as a vinylated chelating agent. The Cu²⁺ ion found to form a stable 1:1 complex with AQ in methanol solution. The resulting Cu²⁺-AQ complex was copolymerized with ethyleneglycol dimethacrylate, as a cross-linking monomer, via precipitation polymerization method. The imprint copper ion was removed from the polymeric matrix using a 0.1 mol L⁻¹ HNO₃ solution. The Cu²⁺-imprinted polymeric nanoparticles were characterized by IR spectroscopy, scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms. The SEM micrographs showed colloidal nanoparticles of 60-100 nm in diameter and slightly irregular in shape. Optimum pH for maximum sorption was 7.0. Sorption and desorption of Cu²⁺ ion on the IIP nanoparticles were quite fast and achieved completely over entire investigated time periods of 2-30 min. Maximum sorbent capacity and enrichment factor of the prepared IIP for Cu²⁺ were 73.8 μmol g⁻¹ and 56.5, respectively. The relative standard deviation and limit of detection (C_LOD = 3S_b/m) of the method were evaluated as 2.6% and 0.1 ng mL⁻¹, using inductively coupled plasma-atomic emission spectrometry, respectively. It was found that the imprinting technology results in increased affinity of the prepared material toward Cu²⁺ ion over other metal ions with the same charge and close ionic radius. The relative standard deviations for six and twenty replicates with the same nanoparticles were found to be 1.7% and 2.1%, respectively.     

Microwave assisted synthesis of manganese mixed oxide nanostructures using plastic templates

The synthesis method for obtaining sub-micrometric structures of rare earth manganese-based mixed oxide compounds is described. Pore wetting of porous polycarbonate templates with the liquid precursor was followed by a two-stage thermal treatment to obtain single phase La_0.325Pr_0.300Ca_0.375MnO₃ hollow and solid structures, with external diameter determined by the sacrificial template pore size. The first thermal stage, a microwave assisted denitration process, determines the shape of the structures. The second treatment, performed at 1073 K, allows to obtain the crystallographic structure of the compound. A variety of techniques (scanning and transmission electron microscopy, scanning probe microscopy) allowed to fully characterize the microstructure and morphology of these self-standing manganite nanostructures. For 1 μm pore size templates we obtained tubes, with external diameter around 800 nm and wall thickness around 150 nm; densely packed nanoparticles sized 20-50 nm are the building blocks of the walls. For pore size below 0.1 μm, solid nanowires were obtained, the size of constituent crystallites being around 10 nm. Overall obtained material exhibits ferromagnetic ordering below 200 K.     

Synthesis of poly(o-phenylenediamine) hollow spheres and nanofibers using different oxidizing agents

Poly(o-phenylenediamine) (PoPD) hollow spheres (ca. 800 nm in outer diameter) were synthesized by a simple solution route using ammonium persulfate (APS) as the oxidizing agent, whereas PoPD nanofibers (0.5-2 μm in width and more than 100 μm in length) and gold nanoparticles (200-500 nm) were obtained when changing the oxidizing agent of APS to chlorauric acid (HAuCl₄). The chemical structures of PoPD hollow spheres and nanofibers were characterized by FTIR and XRD spectra. When using HAuCl₄ as the oxidizing agent, the products of PoPD nanofibers and gold nanoparticles could be separated by chemical methods. The monomer droplets were proposed to act as template to the formation of polymer hollow spheres while the oriented growth of polymer nanofibers might be catalyzed by gold nanoparticles.     

PEO coated magnetic nanoparticles for biomedical application

This paper reports on the preparation, characterization and stealthiness of superparamagnetic nanoparticles (magnetite Fe₃O₄) with a 5 nm diameter and stabilized in water (pH ? 6.5) by a shell of water-soluble poly(ethylene oxide) (PEO) chains. Two types of diblock copolymers, i.e., poly(acrylic acid)-b-poly(ethylene oxide), PAA-PEO, and poly(acrylic acid)-b-poly(acrylate methoxy poly(ethyleneoxide)), PAA-PAMPEO, were prepared as stabilizers with different compositions and molecular weights. At pH ? 6.5, the negatively ionized PAA block interacts strongly with the positively-charged nanoparticles, thus playing the role of an anchoring block. Aggregates of coated nanoparticles were actually observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The hydrodynamic diameter was in the 50-100 nm range and the aggregation number (number of nanoparticles per aggregate) was lying between several tens and hundred. Moreover, the stealthiness of these aggregates was assessed “in vitro” by the hemolytic CH50 test. No response of the complement system was observed, such that biomedical applications can be envisioned for these magnetic nanoparticles. Preliminary experiments of magnetic heating (10 kA/m; 108 kHz) were performed and specific absorption rate varied from 2 to 13 W/g_(Fe).     

Controllable fabrication of platinum nanospheres with a polyoxometalate-assisted process

Pt nanospheres with an average diameter of 60±10 nm have been successfully synthesized at room temperature through a facile polyoxometalate(POM)-assisted process. Characterization by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) clearly showed that these Pt nanospheres consisted of 2-7 nm Pt nanodots. During the formation of such unique nanostructures, POMs were found to serve as both catalyst and stabilizer. The size of the as-synthesized Pt nanospheres could be controlled solely by adjusting the molar ratio of POMs to H₂PtCl₆. A possible formation mechanism based on POMs-mediated electron transfer from ascorbic acid (AA) to PtCl₆²⁻ and AA-assisted aggregation was tentatively proposed to rationalize the formation of such nanostructures. Importantly, these specific Pt nanospheres exhibited good electrocatalytic activity towards the oxidation of methanol, making them promising for applications in direct methanol fuel cells.     

CTAB-Mn3O4 nanocomposites: Synthesis,NMR and low temperature EPR studies

We are reporting on the synthesis of Mn₃O₄ nanoparticles and CTAB-Mn₃O₄ nanocomposites via a sonochemical route using MnCl₂, ethanol, NaOH and CTAB. The crystalline phase was identified as Mn₃O₄. The crystallite size of the CTAB-Mn₃O₄ nanocomposite was identified as 13 ± 5 nm from X-ray line profile fitting and the particle size from TEM was 107.5 ± 1.4 nm. The interaction between CTAB and the Mn₃O₄ nanoparticles was investigated by FTIR and ¹H NMR spectroscopies. Two different magnetic phase transitions were observed for both samples below the Curie temperature (43 °C) by using a low temperature Electron Paramagnetic Resonance (EPR) technique. Also we determined the effect of the capping with CTAB on the reduction in absorbed power.     

Star-shaped Keggin-type heteropolytungstate nanostructure as a new catalyst for the preparation of quinoxaline derivatives

In this work, we report the novel successful preparation of the Keggin-type Cs(CTA)₂PW₁₂O₄₀ (CTA = cetyltrimethylammonium cation) nanostructure by a microemulsion method. The microemulsion system included the cationic surfactant CTAB, 1-butanol as co-surfactant, isooctane as oil phase, and an aqueous solution containing CsNO₃. The Cs(CTA)₂PW₁₂O₄₀ nanostructure was formed by the addition of an aqueous solution of phosphotungstic acid to the microemulsion solution. Characterization of the resultant nanostructure was done using FT–IR spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, and CHN elemental analysis. The product was found to be a star-shaped nanostructure composed of some nanorods whose diameter and length are about 100 nm and 500 nm, respectively. The prepared nanostructure was used as a recoverable catalyst for the synthesis of quinoxaline derivatives by the condensation of 1,2-diamines with 1,2-dicarbonyl compounds, which afforded the products in good to high yields in short reaction times.     

Template free fabrication of hollow hematite spheres via a one-pot polyoxometalate-assisted hydrolysis process

Uniform hollow hematite (α-Fe₂O₃) spheres with diameter of about 600-700 nm and shell thickness lower than 100 nm are obtained by direct hydrothermal treatment of dilute FeCl₃ and tungstophosphoric acid H₃PW₁₂O₄₀ solution at 180 °C. The hollow spheres are composed of robust shells with small nanoparticles standing out of the surface and present a high-surface area and a weak ferromagnetic behavior at room temperature. The effect of concentration of H₃PW₁₂O₄₀, reaction time and temperature for the formation of the hollow spheres are investigated in series of experiments. The formation of the hollow spheres may be ascribed to a polyoxometalte-assisted forced hydrolysis and dissolution process.     

Synthesis of metallic copper nanoparticles coated with polypyrrole

This paper describes a method for polypyrrole (PPy) coating of metallic Cu nanoparticles in aqueous solution in atmosphere. Colloid solution of Cu nanoparticles was prepared by reducing Cu ions with the use of hydrazine in an aqueous solution dissolving citric acid and cetyltrimethylammonium bromide as stabilizers. The PPy coating was performed by polymerizing pyrrole with the use of hydrogen peroxide as an initiator in an aqueous colloid solution of the Cu nanoparticles. Ultraviolet–visible extinction measurements, transmission electron microscopy observation, and X-ray diffraction measurements revealed that the metallic Cu nanoparticles with a size of 27.6 ± 11.1 nm were coated with PPy. The obtained PPy-coated Cu particles were chemically stable even in atmosphere.     

Chemical synthesis of mesoporous CuO from a single precursor: Structural, optical and electrical properties

We report a simple method for growing photoluminescent mesoporous CuO nanoparticles by a chemical route, using the single precursor technique. The final products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N₂ adsorption-desorption isotherm, UV-vis absorption spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Hall measurements. Structural analysis reveals that the average pore diameter of the as-prepared CuO is about 38.8 Å and it comes with an average surface area of 66.63 m²/g. N₂-sorption analysis shows that the resulting isotherm as type IV; which is the characteristic of mesoporous materials. The average crystal diameter, as derived from the XRD data analysis is found to be about 20 nm. FESEM measurement reveals that the material is composed of cubic nanoparticles. The UV-vis spectrum of the material shows significant amount of blue-shift in the band gap energy (E_g), due to the quantum confinement effect exerted by the nanocrystals. The Raman study of the CuO nanostructures also indicates the high crystalline nature of the material. From the positive sign of Hall coefficient, the p-type conduction nature of the deposited film is established. The film was found to show high magnetoresistance, which is in the order of 10⁵ Ω.     

A convenient sol-gel route for the synthesis of salicylate-titania nanocomposites having visible absorption and blue luminescence

Syntheses of titania-based nanomaterials by simple sol-gel route using a mixture of CTAB and salicylate as well as salicylate ions as templates have been reported. The materials are characterized by the powder X-ray diffraction (XRD), thermal analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and spectroscopic (FT IR, UV-VIS) analyses. A disordered mesoscale orientation of nanoparticles (ca. 2-4 nm) composed of TiO₂-salicylate surface complex has been obtained when 1:1 mixing ratio of CTAB and salicylate at the CTAB concentration of 0.001 M was employed as a template. All these nanocomposites exhibit a considerable red shift at the onsets of their absorption band compared to pure (organic-free) nanocrystalline TiO₂ and show blue luminescence at room temperature. This assembly of nanoparticles is highly interesting in the context of visible light sensitization and nanodevice fabrication.     

Photo-activated cytotoxicity of a pyrenyl-terpyridine copper(II) complex in HeLa cells

Terpyridine copper(II) complexes [Cu(L)₂](NO₃)₂, where L is (4′-phenyl)-2,2′:6′,2′′-terpyridine (ph-tpy in 1) and [4′-(1-pyrenyl)]-2,2′:6′,2′′-terpyridine (py-tpy in 2), are prepared, characterized and their photocytotoxic activity studied. The crystal structure of complex 1 shows distorted octahedral CuN₆ coordination geometry. The 1:2 electrolytic and one-electron paramagnetic complexes show a visible band near 650 nm in DMF–H₂O. The complexes show emission band at 352 nm for 1 and 425 nm for 2 when excited at 283 and 346 nm, respectively. The Cu(II)–Cu(I) redox couple is observed near −0.2 V versus SCE in DMF–0.1 M TBAP. The complexes are avid partial-intercalative binders to calf thymus DNA giving binding constant (K_b) values of ∼10⁶ M⁻¹. Complex 2 with its photoactive pyrenyl moiety exhibits significant photocleavage of pUC19 DNA in red light via singlet oxygen pathway. Complex 2 also exhibits significant photo-activated cytotoxicity in HeLa cancer cells in visible light giving IC₅₀ value of 11.9 μM, while being non-toxic in dark with an IC₅₀ value of 130.5 μM.     

Synthesis and characterization of Pd(0), PdS, and Pd@PdO core-shell nanoparticles by solventless thermolysis of a Pd-thiolate cluster

Colloids of palladium nanoparticles have been prepared by the solvated metal atom dispersion (SMAD) method. The as-prepared Pd colloid consists of particles with an average diameter of 2.8±0.1 nm. Digestive ripening of the as-prepared Pd colloid, a process involving refluxing the as-prepared colloid at or near the boiling point of the solvent in the presence of a passivating agent, dodecanethiol resulted in a previously reported Pd-thiolate cluster, [Pd(SC₁₂H₂₅)₂]₆ but did not render the expected narrowing down of the particle size distribution. Solventless thermolysis of the Pd-thiolate complex resulted in various Pd systems such as Pd(0), PdS, and Pd@PdO core-shell nanoparticles thus demonstrating its versatility. These Pd nanostructures have been characterized using high-resolution electron microscopy and powder X-ray diffraction methods.     

Synthesis of Bi2Se3 thermoelectric nanosheets and nanotubes through hydrothermal co-reduction method

Bi₂Se₃ nanosheets and nanotubes were prepared by a hydrothermal co-reduction method at 150, 180, 200, and 210 °C. Bi₂Se₃ nanosheets, nanobelts and nanotubes were obtained. The Bi₂Se₃ nanoflakes are 50-500 nm in width and 2-5 nm in thickness. The Bi₂Se₃ nanotubes are 5-10 nm in diameter, 80-120 nm in length, and 1.3 nm in wall thickness. X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, and electron diffraction were employed to characterize the products. Experimental results showed that the nanosheets and the nanotubes are hexagonal in structure with a=4.1354 Å and c=27.4615 Å. A possible formation and crystal growth mechanism of Bi₂Se₃ nanostructures is proposed.     

Seed-mediated synthesis of copper nanoparticles on carbon nanotubes and their application in nonenzymatic glucose biosensors

In this paper, for the first time, Cu nanoparticles (CuNPs) were prepared by seed-mediated growth method with Au nanoparticles (AuNPs) playing the role of seeds. Carbon nanotubes (CNTs) and AuNPs were first dropped on the surface of glassy carbon (GC) electrode, and then the electrode was immersed into growth solution that contained CuSO₄ and hydrazine. CuNPs were successfully grown on the surface of the CNTs. The modified electrode showed a very high electrochemical activity for electrocatalytic oxidation of glucose in alkaline medium, which was utilized as the basis of the fabrication of a nonenzymatic biosensor for electrochemical detection of glucose. The biosensor can be applied to the quantification of glucose with a linear range covering from 1.0 × 10⁻⁷ to 5 × 10⁻³ M and a low detection limit of 3 × 10⁻⁸ M. Furthermore, the experiment results also showed that the biosensor exhibited good reproducibility and long-term stability, as well as high selectivity with no interference from other oxidable species.     

Biosynthesis and structural characteristics of selenium nanoparticles by Pseudomonas alcaliphila

In this paper, we report that selenium (Se) nanoparticles were first biosynthesized by Pseudomonas alcaliphila with a simple and eco-friendly biological method. The structural characteristics of Se nanoparticles were examined. The results showed that spherical particles appeared with diameters ranging from 50 to 500 nm during incubation and Se nanorods were present after incubating in an aqueous reaction solution for 24 h. However, the formation of Se nanorods was interrupted when 5% (w/v) poly(vinyl pyrrolidone) (PVP) was added in the aqueous reaction solution, obtaining stable spherical Se nanoparticles with a diameter of about 200 nm.     

Green synthesis of nanowire-like Pt nanostructures and their catalytic properties

We reported a simple and effective green chemistry route for facile synthesis of nanowire-like Pt nanostructures at one step. In the reaction, dextran acted as a reductive agent as well as a protective agent for the synthesis of Pt nanostructures. Simple mixing of precursor aqueous solutions of dextran and K₂PtCl₄ at 80 °C could result in spontaneous formation of the Pt nanostructures. Optimization of the experiment condition could yield nanowire-like Pt nanostructures at 23:1 molar ratio of the dextran repeat unit to K₂PtCl₄. Transmission electron microscopy results revealed that as-prepared nanowire-like Pt nanostructures consisted of individual Pt nanoparticles with the size range from 1.7 to 2.5 nm. Dynamic light scattering analysis indicated that as-prepared nanowire-like nanostructures have already formed in solution. The as-prepared nanowire-like Pt nanostructures were further characterized by UV-vis spectroscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. In addition, the ratio dependence and temperature dependence of this reaction have also been investigated. The as-prepared nanowire-like Pt nanostructures can be immobilized on glassy carbon electrodes using an electrochemical coupling strategy, and the resulting nanowire-like Pt nanostructures modified film exhibited an excellent electrocatalytic activity for the reduction of oxygen and the oxidation of NADH.     

Formation of nanoparticles of a new metastable copper compound in the copper acetate hydrate/poly(acrylonitrile) heterogeneous system

We use X-ray powder diffraction to study heterogeneous solid-phase reactions induced by IR radiation in the system Cu(OOCCH₃)₂·H₂O/PAN and intermediate copper compounds in the synthesis of copper nanoparticles. The composite Cu(OOCCH₃)₂ · H₂O/PAN after annealing contains crystallites of copper (l _Cu = 16 nm), a new metastable compound Cu _x>2O ( $ l_{Cu_{x > 2} O} We use X-ray powder diffraction to study heterogeneous solid-phase reactions induced by IR radiation in the system Cu(OOCCH₃)₂·H₂O/PAN and intermediate copper compounds in the synthesis of copper nanoparticles. The composite Cu(OOCCH₃)₂ · H₂O/PAN after annealing contains crystallites of copper (l _Cu = 16 nm), a new metastable compound Cu _x>2O ( = 20 nm), and Cu₂O ( = 20 nm). After 45 days of air exposure, the intensity of Cu _x>2O reflections in the composite decreases dramatically, whereas that of copper reflections increases. Cu _x>2O has a monoclinic unit cell with the parameters a = 5.424, b = 3.196, c = 3.072 ?, β = 119.51°. Original Russian Text ? V.M. Novotortsev, V.V. Kozlov, Yu.M. Korolev, G.P. Karpacheva, L.V. Kozhitov, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 7, pp. 1087–1089.     

CTAB-assisted synthesis of mesoporous F-N-codoped TiO2 powders with high visible-light-driven catalytic activity and adsorption capacity

This article describes the preparation of mesoporous rod-like F-N-codoped TiO₂ powder photocatalysts with anatase phase via a sol-gel route at the temperature of 373 K, using cetyltrimethyl ammonium bromide (CTAB) as surfactant. The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra (UV-vis DRS). The results showed that the photocatalysts possessed a homogeneous pore diameter and a high surface area of 106.3-160.7 m³ g⁻¹. The increasing CTAB reactive concentration extended the visible-light absorption up to 600 nm. The F-N-codoped TiO₂ powders exhibited significant higher adsorption capacity for methyl orange (MO) than that of Degussa P25 and showed more than 6 times higher visible-light-induced catalytic degradation for MO than that of P25.