Diode-pumped Kerr-lens mode-locked femtosecond Yb:YAG ceramic laser

We experimentally demonstrated a diode-pumped Kerr-lens mode-locked femtosecond laser based on an Yb:YAG ceramic. Stable laser pulses with 97-fs duration, 2.8-nJ pulse energy, and 320-mW average power were obtained. The femtosecond oscillator operated at a central wavelength of 1049 nm and a repetition rate of 115 MHz. To the best of our knowledge, this is the first demonstration of a Kerr-lens mode-locked operation in a diode-pumped Yb:YAG ceramic laser with sub-100 fs pulse duration.     

Stabilizing the frequency of femtosecond Ti:sapphire comb laser by a novel scheme

We demonstrated a novel scheme for scanning the absolute frequencies of a femtosecond Kerr-lens mode-locked Ti:sapphire laser with the repetition rate unaffected, where the carrier-envelop phase of the pulse was controlled by slightly shifting pump beam and the repetition rate was phase locked to a stable radio-frequency oscillator. Since it was the first time to stabilize the frequency of a mode-locked laser by referring directly to the frequency of cesium two-photon-transition (TPT) stabilized diode laser, we evaluated the frequency instability and the frequency accuracy that showed the characteristic of being a comb laser. The feature of the comb laser in this report will be significant for multi-photon spectroscopy where the frequency difference between comb lines plays a key role. PACS  06.30.+v; 42.60.By     

基于光纤中超短脉冲非线性传输机理与特定光谱选择技术的多波长飞秒激光的产生

高集成、高可靠性宽调谐飞秒激光源在超快光谱学、量子光学及生物成像等研究与应用领域具有重要价值.如在生物多光子显微成像中,具有适中能量的宽调谐飞秒激光源不仅可满足多种生物组织荧光激发所需的峰值功率与激发波长,而且也可以显著提升非线性荧光产生效率、成像分辨率以及增大成像穿透深度.采用自主研发的高可靠性全保偏光纤飞秒激光器作为抽运源,基于低色散光纤中高峰值功率飞秒激光脉冲非线性传输引起的光谱加宽机制,本文开展了多波长全光纤飞秒激光产生技术研究.通过采用中心波长在980, 1000,1050, 1070与1100 nm的带通滤波片选择性地对单模光纤输出光谱中最左边与最右边光谱旁瓣进行滤波,在上述中心波长处分别可获得203, 195, 196, 187与194 fs的激光输出.本文提出的基于全光纤飞秒激光脉冲在单模光纤中非线性传输引起的光谱加宽机制与特定光谱选择技术的实验方案为高集成、高可靠性宽调谐飞秒激光源的实现提供了新的研究途径.     

Femtosecond mode-locked holmium fiber laser pumped by semiconductor disk laser

We report on a 2085 nm holmium-doped silica fiber laser passively mode-locked by semiconductor saturable absorber mirror and carbon nanotube absorber. The laser, pumped by a 1.16 μm semiconductor disk laser, produces 890 femtosecond pulses with the average power of 46 mW and the repetition rate of 15.7 MHz.     

Graphene mode-locked femtosecond laser at 2 μm wavelength

We experimentally demonstrated a passively mode-locked femtosecond laser by using a graphene-based saturable absorber mirror (graphene SAM) in the spectral region of 2 μm. The graphene SAM was fabricated by transferring chemical-vapor-deposited, high-quality, and large-area graphene on a highly reflective plane mirror. Stable mode-locked laser pulses as short as 729 fs were obtained with a repetition rate of 98.7 MHz and an average output power of 60.2 mW at 2018 nm.     

Diode-pumped mode-locked femtosecond Tm:CLNGG disordered crystal laser

A diode-end-pumped passively mode-locked femtosecond Tm-doped calcium lithium niobium gallium garnet (Tm:CLNGG) disordered crystal laser was demonstrated for the first time to our knowledge. With a 790 nm laser diode pumping, stable CW mode-locking operation was obtained by using a semiconductor saturable absorber mirror. The disordered crystal laser generated mode-locked pulses as short as 479 fs, with an average output power of 288 mW, and repetition rate of 99 MHz in 2 μm spectral region.     

High-resolution spectroscopy with a femtosecond laser frequency comb

The output of a mode-locked femtosecond laser is used for precision single-photon spectroscopy of 133Cs in an atomic beam. By changing the laser's repetition rate, the cesium D1 (6s 2S(1/2)-->6p 2P(1/2)) and D2 (6s 2S(1/2)-->6p 2P(3/2)) transitions are detected and the optical frequencies are measured with accuracy similar to that obtained with a cw laser. Control of the femtosecond laser repetition rate by use of the atomic fluorescence is also implemented, thus realizing a simple cesium optical clock.     

Low-repetition-rate high-peak-power Kerr-lens mode-locked TiAl(2)O(3) laser with a multiple-pass cavity

We demonstrate a novel, long, multiple-pass cavity (MPC) to obtain low repetition rates and high peak intensities from Kerr-lens mode-locked lasers. We show that the MPC provides a zero effective length by a unity transformation of the q parameter after a given number of transits of the laser beam. Pulse durations of 16.5 fs with 0.7 MW of power at a 15-MHz repetition rate are achieved. This is, to our knowledge, the lowest repetition rate ever achieved directly from a femtosecond laser resonator without use of additional active devices and cavity dumping. The combination of low repetition rates and high peak intensity is extremely useful for femtosecond pump-probe and other nonlinear experiments because it permits the application of high peak intensity without excessive average power.     

基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器

报道了一种基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器.该激光器采用环形腔结构,利用自制的三层石墨烯薄膜作为可饱和吸收体实现锁模.同时在腔内插入一个窄带光纤光栅,约束腔内起振的纵模数,适当调节抽运功率和偏振控制器的角度,得到了重复频率为3.8 MHz、脉宽在3.8—94.3 ns之间灵活可调的2μm纳秒锁模脉冲输出,整个脉宽调节范围超过90 ns.此外,由于获得的兆赫兹纳秒锁模脉冲时间带宽积在49—1119范围内,即存在强烈的啁啾,因而可作为2μm波段啁啾脉冲放大系统中的种子源使用.     

4.5MW小型化全固态腔倒空飞秒掺钛蓝宝石激光器

研制了国内首台腔倒空克尔透镜自锁模掺钛蓝宝石激光器,该激光采用二极管抽运的全固态连续波532nm激光抽运.在5.4W的抽运功率下,获得了峰值功率大于4.5MW、脉宽小于18fs的稳定锁模脉冲,其重复频率可低至20kHz,所占尺寸约53.5cm×20.5cm.据知,此结果是迄今重复率最低、结构最紧凑的声光腔倒空飞秒激光器件 关键词： 掺钛蓝宝石 腔倒空 飞秒脉冲 克尔透镜锁模     

用于产生飞秒压缩态的染料激光器稳定性分析与实验研究

提出一种能产生飞秒脉冲光压缩态的激光器的理论模型，并通过数值计算，详细分析该激光器的稳定性；通过具体的实验研究获得了脉宽为１６０ｆｓ，重复频率为６７ＭＨｚ的稳定的脉冲序列输出，从而为实现飞秒脉冲光压缩态提供了重要的实验手段。 关键词：     

Two-element-cavity femtosecond Cr(4+):YAG laser operating at a 2.6-GHz repetition rate

A femtosecond Cr(4+):YAG laser with a simple two-element cavity was built. This laser typically attained a repetition rate of 2.64 GHz with a pulse width of 115 fs at a center wavelength of 1540 nm. Output pulses were characterized by second-harmonic generation frequency-resolved optical gating. Alignment of the two-element cavity for mode-locked operation was easy; moreover, the cavity structure has the potential to produce an even higher repetition rate because one can miniaturize it simply by shortening a gain medium length.     

Energy scaling of a carbon nanotube saturable absorber mode-locked femtosecond bulk laser

We report successful energy scaling of a room-temperature femtosecond Cr⁴⁺: forsterite laser by using a single-walled carbon nanotube saturable absorber (SWCNT-SA). By incorporating a q-preserving multipass cavity, a repetition rate of 4.51?MHz was realized, and the oscillator produced 121?fs, 10?nJ pulses at 1247?nm, with an average output power of 46?mW. To the best of our knowledge, the peak power of 84?kW is the highest generated to date from a SWCNT-SA mode-locked oscillator. Furthermore, energy scaling of a femtosecond multipass-cavity laser, mode-locked using a SWCNT-SA, is demonstrated for the first time.     

7.6-W diode-pumped femtosecond Yb:KGW laser

We have demonstrated a high power diode-pumped mode-locked femtosecond Yb:KGW laser with semiconductor saturable absorber mirror(SESAM). By using an output coupler with 10% transmittance, the laser delivered 160-fs pulses with average output power of 7.6 W at a repetition rate of 78 MHz, corresponding to pulse energy of 97 nJ and peak power of 606 kW.     

光梳主动滤波放大实现锶原子光钟二级冷却光源

提出一种结合注入锁定技术的主动滤波放大方法,将光梳直接注入锁定至光栅外腔半导体激光器,产生窄线宽激光光源,该光源可以用于锶原子光钟二级冷却.实验中,将中心波长为689 nm,带宽为10 nm的光梳种子光源注入689 nm光栅式外腔半导体激光器,通过半导体增益光谱与半导体光栅外腔,从飞秒光梳的多个纵模梳齿中挑选出一个纵模模式来进行增益放大,再通过模式竞争,实现单纵模连续光输出;同时,光梳的重复频率锁定在线宽为赫兹量级的698 nm超稳激光光源上,因此,注入锁定后输出的窄线宽激光也继承了超稳激光光源的光谱特性.利用得到的输出功率为12 mW的689 nm窄线宽激光光源实现了88Sr原子光钟的二级冷却过程,最终获得温度为3μK,原子数约为5×10~6的冷原子团.该方法可拓展至原子光钟其他光源的获得,从而实现原子光钟的集成化和小型化.     

Microjoule pulses from a passively mode-locked Yb:KY(WO(4))(2) thin-disk oscillator with cavity dumping

We demonstrate, for the first time to our knowledge, a passively mode-locked femtosecond thin-disk oscillator with cavity dumping. A beta-barium-borate-based pockels cell imposes cavity dumping at a repetition rate of 1 MHz. The laser generates pulse energies up to 3 microJ with a pulse duration of 680 fs in a diffraction-limited beam.     

Room temperature femtosecond optical parametric generation in MgO-doped stoichiometric LiTaO3

We demonstrate room temperature femtosecond optical parametric generation with high average output power in periodically poled MgO-doped stoichiometric LiTaO₃. Direct pumping with 725-fs pulses from a passively mode-locked thin disk laser at 1030 nm resulted in stable 1.5 W average signal power at 1484 nm at the full laser repetition rate of 59 MHz. With this demonstration we achieved a significant simplification of our recently presented red-green-blue laser source because no temperature stabilization of any nonlinear crystal is required. PACS 42.65.Yj; 42.70.Mp; 42.79.Nv     

低阈值展宽脉冲锁模掺Er3+光纤环形激光器的实验研究

将正色散值较小的掺铒光纤引入传统的环形腔构成了低阈值的展宽脉冲锁模激光器.通过使用这种掺铒光纤,激光器的锁模阈值大大降低,激光器的自起振泵浦功率仅为90 mW,而且在29 mW的低泵浦功率时仍然可维持稳定的锁模状态.实验中获得了脉冲宽度为175 fs,光谱半高宽为40 nm,重复频率为33 MHz的锁模脉冲输出.激光器工作稳定,光谱干净光滑.     

Femtosecond Ti:sapphire ring laser with a 2-GHz repetition rate and its application in time-resolved spectroscopy

A Kerr-lens mode-locked femtosecond Ti:sapphire laser operating at a repetition rate of 2 GHz is demonstrated. A mirror-dispersion-controlled unidirectional ring cavity delivers nearly bandwidth-limited pulses of 23-fs length. Mode locking is self-starting without a hard aperture in the cavity. The advantages of this high-repetition-rate oscillator in optical time-resolved spectroscopy are demonstrated.     

采用飞秒光纤激光同步泵浦的自启动锁模钛宝石激光研究

针对常规连续激光泵浦钛宝石激光振荡器不能自启动锁模的缺点,采用倍频飞秒光纤激光同步泵浦,通过调节振荡器腔长与泵浦腔长匹配,实现了飞秒钛宝石激光的自启动锁模。实验中采用3.4 W的倍频掺镱光纤激光同步泵浦钛宝石激光振荡器,获得了平均功率大于130 mW、重复频率75 MHz、光谱宽度大于47 nm、脉冲宽度17 fs的锁模脉冲输出,不仅能够稳定可靠地实现自启动锁模,解决了常规钛宝石激光振荡器锁模启动的困难,而且还具有同步输出1040,800,520 nm三束飞秒激光的特点,为进一步开展飞秒激光相干合成以及光参量放大等研究提供了优势基础。