Determination of pyrene and benzo(a)pyrene residues in water by derivative synchronous solid-phase spectrofluorimetry

Benzo(a)pyrene (BaP) and pyrene (Pyr) are two polycyclic aromatic hydrocarbons (PAHs) showing native fluorescence in solution. Both compounds have been determined in water at trace levels by solid-phase spectrofluorimetry, in which BaP and Pyr are fixed on Sephadex G-25 gel and the relative fluorescence intensity is measured after the system is packed in a 1-mm silica cell. First-derivative synchronous spectra obtained at =38 nm were used to determine BaP and Pyr in the presence of other potentially interferent PAHs. The spectral characteristics of the PAHs-gel system are described, the applicable concentration ranges being 0.4–2.5 ng/ml for BaP and 0.7–4.5 ng/ml for Pyr. The relative standard deviations were 1.1% and 1.4% for BaP and Pyr respectively. The detection limits were 0.04 ng/ml for BaP and 0.1 ng/ml for Pyr. The method was applied to the analysis of both compounds in water at trace levels and a recovery study on tap, natural and sea waters was carried out.     

Spectrofluorimetric determination of traces of indium with 5-chiorosalicylidene-o-aminophenol

A Spectrofluorimetric method for microdetermination of indium, based on the formation of a fluorescent 21 (ligand:metal) complex between In (III) and 5-chlorosalicylidene-o-aminophenol at an apparent pH of 4.70 in an aqueous-ethanol medium (50% v/v ethanol) is proposed. The calibration graph is linear over the range 10.0–80.0 g/l, the relative standard deviation 2.7% and the detection limit 1.5 g/l. The method has been applied to the determination of indium in synthetic samples and natural waters.     

Spectrophotometric and derivative spectrophotometric determination of nickel with hydroxynaphthol blue

The reaction of nickel(II) cation with hydroxynaphthol blue (HNB) in aqueous media at pH 5.2–6.0 results in a red complex that is stable for at least 2h. Beer's Law is obeyed up to 3.2 g/ml of nickel(II) with an apparent molar absorptivity of 1.38 × 10⁴l/mol/cm at 563 nm. This paper proposes procedures for nickel determination by ordinary and first-derivative spectrophotometry. The results demonstrate that the linear dynamic range is 0.08–3.20 g/ml with a limit of detection of 23 ng/ml for ordinary spectrophotometry, compared with 21–800 ng/ml and 6 ng/ml, respectively, for first-derivative spectrophotometry. Calcium(II), magnesium(II), barium(II), strontium(II), cadmium(II), lead(II), manganese(II), bismuth(III) and molybdenum(VI) ions do not interfere for at least 1001 mass ratios. The main interferents are cobalt(II), titanium(IV), aluminium(III), mercury(II) and copper(II). The interferences of titanium(IV), aluminium(III), zirconium(IV) and iron(III) can be masked by fluoride and mercury(II) and copper(II) with thiosulfate or thiourea. The derivative method is applied to nickel determination in standard brasses and the results demonstrate that there is no significant difference between the results and certified values at the 95% confidence level.     

Determination of trace scandium by ion-exchanger phase spectrophotometry withp-nitrochlorophosphonazo

Ion-exchanger phase Spectrophotometry withp-nitrochlorophosphonazo (CPApN) has been developed for the determination of scandium. The linear range is 1–8 g of scandium in 50 ml of solution, using 0.8 g of resin, with an apparent molar absorptivity of 2.76 × 10⁵ 1 mol^–1 cm^–1. Aluminum and rare earth elements in reasonable amounts do not interfere. The method has been applied successfully to the determination of scandium in alloys, with relative standard deviations of 2–4%.     

Determination of the curcuminoid pigments in turmeric (Curcuma domestica Val) by reversed-phase high-performance liquid chromatography

Summary A rapid, simple and reproducible reversed-phase high-performance liquid chromatographic method was developed for the quantitative determination of curcumin, demethoxycurcumin and bis-demethoxycurcumin in ethanolic extracts of turmeric. The pigments were separated on a styrene-divinylbenzene copolymer column (Hamilton PRP-1), using an acetonitrile-water (5545, v/v) mobile phase. The pigments were monitored with a diode-array detector at 425 nm. The limit of detection was 10.2 ng curcumin, 11.1 ng demethoxycurcumin and 6.2 ng bis-demethoxycurcumin. Comparison of HPLC and spectrophotometric results for the determination of the total curcuminoid content for a number of turmeric samples, reveal that the spectrophotometric method invariably yielded higher results, indicating an overestimation of curcuminoids.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

LC-APCI-MS-MS methodology for determination of glybenclamide in human plasma

A liquid chromatographic/atmospheric pressure chemical ionization tandem mass spectrometric method (LC-APCI-MS-MS) for the determination of glybenclamide in human plasma is described. Glypizide, an analogue of glybenclamide, was used as internal standard. The analyte was extracted from plasma with diethyl ether/dichloromethane (70:30 v/v). The chromatography uses C₁₈ and 0.01 mol L^–1 acetic acid/acetonitrile (20:80 v/v) as stationary and mobile phase, respectively. Quantitation was preformed by using multiple reaction monitoring (MRM) of the precursor ion (m/z 494.2368.8) and the related product ion (m/z 446.0347.3) using the internal standard method. The analytical curve was linear in the range 1–300 ng mL^–1, and for a 400-L sample of human plasma, the limit of determination of the method was 1 ng mL^–1. The coefficients of variation of the method for intra-assay (within-run precision) and inter-assay (between-run precision) were less than 10%. The method was shown to be suitable for pharmacokinetic studies.An erratum to this article can be found at     

Sensitive determination of cinnarizine in human plasma by high performance liquid chromatography and fluorescence detection

Summary A sensitive high performance liquid chromatographic method has been developed for the determination of cinnarizine in human plasma. Cinnarizine and clocinizine (internal standard) were extracted from acidified plasma (pH 4.7) into carbon tetrachloride and the organic layer was evaporated. The products were separated on a Microspher C18 (3 m) column, using a mixture of 0.04 % triethylamine in 0.01 M ammonium dihydrogen phosphate (NH₄H₂PO₄), pH adjusted to 4.2 with orthophosphoric acid (H₃PO₄), and acetonitrile (2080, v/v) as mobile phase, at a flow rate of 1 ml/min at 40°C. Fluorescence detection (_ex = 245 nm, _em = 310 nm) was used; the detection limit was 0.5 ng/ml under the conditions used, and the calibration curve linear in the concentration range evaluated (1–60 ng/ml). The assay has been used to measure cinnarizine concentrations in plasma after oral administration to volunteers.     

Fluorimetric determination of aluminium in water by sequential injection through column extraction

A fluorimetric procedure for the determination of aluminium with matrix removal in drinking water is proposed. The system is based both on the solid phase extraction of aluminium on a new chelating resin (XAD-4 modified by grafting salicylic acid) and the fluorimetric detection of a complex formed between 8-hydroxyquinoline-5-sulfonic acid (HQS) and Al(III), after elution of the resin by hydrochloric acid. The sorption and elution of aluminium were studied in both competitive and non-competitive conditions, varying pH, flow-rates, volume and concentration of reagents, as well as time contact. The optimised procedure allows determination of Al³⁺ at the sub-ppb level (LOD: 0.2 g L^–1 for 1 ml of sample) within a working range of 0.2–500 g L^–1. The analytical procedure was successfully employed for the determination of aluminium in drinking water during and after flocculation/coagulation treatment processes.     

Ion-pair adsorption film colorimetry — A new simple method for ppb level of aluminum ion in water sample

A new, highly sensitive and simple colorimetric method for trace aluminum(III) with 2,2-dihydroxyazobenzene, H₂L, is described, based on the ion-pair adsorption of the anionic Al chelate, [A1L₂ ^–, with crystal violet cation, CV⁺, on the surface of Polyvinylchloride film plasticized with dioctylphthalate. The blue violet species, CV⁺[A1L₂]^–, is enriched onto the transparent film, leading to a remarkable enhancement of the sensitivity, and the detection limits are 3 ng/ml by spectrophotometry and 5 ng/ml by visual colorimetry, respectively. Using spectrophotometer, a linear calibration curve is obtained over the concentration range of 0 to 50 ng/ml of Al. Further, the color system, consisting of red ([A1L₂]^–), yellow (H₂L), and blue violet (CV⁺), gave clear color changes suitable for visual determination of aluminum with an applicable range of 0 to above 3000 ng/ml. The four different color zones are khaki for 0–5 ng/ml, reddish-brown for 5–200 ng/ml, blue violet for 200 ng/ml-3g/ml, and colorless for more than 3g/ml. The proposed method has been successfully applied for the determination of aluminum in tap waters.     

Trace analysis of selected benzidine and diaminodiphenylmethane derivates in urine by means of liquid chromatography using precolumn sample preconcentration,UV and electrochemical detection

Summary For the title compounds 4,4-DADPM, MOCA, 3,3-DCB, 4-ADP and 4-ADPA listing on the EPA priority pollutant list, an analytical practicable, reliable, reproducible and sensitive procedure is required. Therefore a new method has been developed for the routine determination of these toxic aromatic amines in urine at the ppb level. The quantitative determination of amines is a suitable procedure of occupationally exposed persons. Urine sample preparation is done using simple liquid-liquid extraction followed by a precolumn enrichment (PRP₁-material; Hamilton). Breakthrough measurements were done using an enrichment column packed with PRP₁ material. The capacities of the studied amines ranged from 21.9mg/g to 96.6mg/g, while influent concentrations differed from 28.3mg/l to 332.0mg/l. The advantages of electrochemical detection regarding to selectivity and sensitivity are clearly indicated in this paper. Separation has been achieved applying reversed-phase-high-performance-liquid chromatography (LiChrosorb RP 18/5m) followed by electrochemical or UV-detection. The detection limits employing an electrochemical detector at a potential of 1 V range from 2.2ng to 12.1ng. UV detection at 254 nm and 280 nm is about 10–100 times less sensitive. Recoveries from spiked water samples at the 5ppb levels were 75% to 96% respectively. The standard deviation of the developed procedure varies from 5.3% to 14%. Day-to-day repeatability is good.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.     

The rapid separation and determination of uranium(VI) by use of DEAE anion-exehange paper and the ring-oven technique

Summary A rapid method for the separation and determination of uranium(VI) is described. The separation of uranium (0.09–0.35 mg/ml) from various other metals is carried out on DEAE anion-exchange paper with ann-butanol-acetic acid-water system (111,v/v), and the determination completed by the ring oven method.

---

Zusammenfassung Eine schnelle Methode zur Trennung und Bestimmung von Uran(VI) wird beschrieben. Die Trennung des Uran(VI) (0,09 bis 0,35 mg/ml) von anderen Metallionen erfolgt auf Anionenaustauscherpapier (DEAE) mit einem 1-Butanol-Essigsäure-Wasser-System (111v/v), die Bestimmung mit Hilfe der Ringofenmethode.

     

2-[2-(6-Methylbenzothiazolyl)azo]-5-Diethylaminobenzoic acid as a new analytical reagent for the spectrophotometric determination of nickel

A new thiazolylazo chromogenic reagent, 2-[2-(6-methylbenzo-thiazoly)azo]-5-diethylaminobenzoic acid (6-Me-BTAEB), has been synthesized. Its chromogenic reaction with microamounts of nickel in the presence of sodium dodecylsulfate (SDS) has been thoroughly studied. 6-Me-BTAEB reacts with nickel(II) in weak acid medium containing appropriate amounts of SDS to form a blue-violet complex with high sensitivity, good selectivity and high stability. The composition is found to be 1:2 (nickel to 6-Me-BTAEB) and its absorption maximum is at 650 nm with an apparent molar absorptivity of 1.67 × 10⁵l mole^–1 cm^–1. Beer's law is obeyed over the range 0-0.4 g of nickel per ml. The proposed method has been applied to the direct determination of nickel in aluminium alloys, pure magnesium and low alloy steels at the 0.2–0.3% (w:w) level with satisfactory results.     

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO₄ and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO₄ and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of detection of 10 g 1^–1 foro-cresol and 30 g 1^–1 form-cresol were found. The flow injection method has a lower sensitivity but permits more than 80 injections per hour. Based on the different maximum absorbance wavelengths obtained for the reaction products of PAP witho-cresol (614 nm) andm-cresol (632 nm), both compounds can be simultaneously determined in water samples and recoveries of 90 to 115% were found in spiked water samples of different types.     

Rapid quenchofluorimetric determination of nickel(II) in some real and environmental samples

A fluorimetric method for rapid determination of Ni at trace and ultratrace levels [1 ng/ml- 1 g/ml] has been developed. It is based on the efficient quenching action of Ni (II) on the native fluoresence [_ex(max) = 288 nm, _em(max) = 444.8 nm] of 4,7-diphenyl 1,10-phenanthrolinedisulfonate (bathophenanthrolinedisulfonate) solution at low acidities. The method is very simple, rapid and accurate with high precision (R.S.D. = 0.66% at 50 ng/ml). The method has been applied directly to mineralised solutions of several real and environmental samples and the results of nickel determinations are in excellent agreement with the certified values. It is a quick single-step method that requires no clean-up.     

Determination of pefloxacin in serum and pharmaceutical forms by derivative spectrophotometry

A method for the direct determination of pefloxacin in serum and pharmaceutical forms (tablets and ampoules) has been developed, based on the use of second-order derivative ultraviolet spectra. Spectrophotometric assay of pefloxacin in tablets and ampoules was carried out in 0.1 mol/L NaOH, while in serum it was performed in 0.1 mol/L NaOH with the addition of sodium dodecylsulfate, in 337–347 nm wavelength range. Linear calibration curves were obtained in the concentration ranges 2–30g/mL pefloxacin for tablets and ampoules and 0.12–5 g/ mL for serum samples. Relative error of determination, as criterion for accuracy, was less than 1%, while the precision was better than 4 ng/ml. The minimum detectable concentration of pefloxacin in serum was 15 ng/mL.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Extraction and spectrophotometric determination of titanium(IV) withN 1-hydroxy-N 1,N 2-diphenylbenzamidine and thiocyanate

A precise, reliable, sensitive, and selective method for the determination of titanium(IV) is described. Titanium(IV) reacts withN ¹-hydroxy-N ¹,N ²-diphenylbenzamidine (HDPBA) and thiocyanate to form an orange-coloured mixed-ligand complex of stoichiometry 112 (Ti SCN^– HDPBA). The complex is quantitatively extractable into toluene from 0.05–0.15M hydrochloric acid. The spectrum of the complex exhibits an absorption maximum at 400 nm with a molar absorptivity of 20000M ^–1 cm^–1 and the coloured system obeys Beer's law in the concentration range 0.20–3.0 gml^–1 titanium. The effects of foreign ions and of various experimental parameters have been studied to establish the optimum conditions for the extraction and determination of titanium. The precision of the method has been evaluated and the relative standard deviation has been found to be 0.53%. The method has been successfully applied to the determination of titanium in synthetic matrices corresponding to titanium-containing ores, minerals, and alloys.