Theoretical Study of Chemical Binding of Noble Gas Atom and Transition Metal Complexes: Ng–NiCO, Ng–NiN2, Ng–CoCO (Ng = He–Xe)

Summary. Ab initio multireference and coupled cluster methods (MR-SDCI(+Q), CASPT2, CCSD(T)) and density functional theory methods (B3LYP, MPWPW91) have been applied to examine geometrical structures and vibrational frequencies of noble gas (Ng) – transition metal compounds, Ng–NiCO, Ng–NiN₂, and Ng–CoCO (Ng = He, Ne, Ar, Kr, Xe). It is shown that the respective compounds can have a larger binding energy than a typical van der Waals interaction energy. The binding mechanism is explained by a partial electron transfer from a noble gas atom to the low-lying 4s and 3d vacant orbitals of the transition metal atom. Theoretical calculations show that the binding of noble gas atom results in a large shift of the bending frequency: 361.1cm^–1 (NiCO) to 403.5cm^–1 (Ar–NiCO); 308.5cm^–1 (NiN₂) to 354.8cm^–1 (Ar–NiN₂); 373.0cm^–1 (CoCO) to 422.6cm^–1 (Ar–CoCO). The corresponding experimental frequencies determined in solid argon are 409.1cm^–1 (NiCO), 357.0cm^–1 (NiN₂), and 424.9cm^–1 (CoCO), which are much closer to the corresponding frequency of Ar–NiCO, Ar–NiN₂, and Ar–CoCO, respectively.     

Extraction of europium and americium into phenyltrifluoromethyl sulfone by using hydrogen dicarbollylcobaltate in the presence of N,N′-diethyl-N,N′-diphenyl-2,6-dipicolinamide

Extraction of microamounts of europium and americium by a phenyltrifluoromethyl sulfone (FS 13) solution of hydrogen dicarbollylcobaltate (H⁺B⁻) in the presence of N,N,N′,N′-tetraethyl-2,6-dipicolinamide (TEtDPA, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, \textHL ₂ ⁺ , {\text{HL}}_{ 2}^{ + } , \textML₂^{3 +} {\text{ML}_{2}^{3 +}} and \textML ₃ ³⁺ {\text{ML}_{ 3}^{ 3+}} (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the cationic complex species in FS 13 saturated with water have been determined. It was found that the stability constants of the corresponding complexes \textEuL_n ³⁺ {\text{EuL}}_{n}^{ 3+ } and \textAmL_n ³⁺ {\text{AmL}}_{n}^{ 3+ }, where n = 2, 3 and L is TEtDPA, in the mentioned FS 13 medium are comparable.     

Solvent extraction of calcium and strontium into nitrobenzene by using a synergistic mixture of hydrogen dicarbollylcobaltate and N,N,N′,N′-tetraisobutyl-2,6-dipicolinamide

Extraction of microamounts of calcium and strontium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B⁻) in the presence of N,N,N′,N′-tetraisobutyl-2,6-dipicolinamide [T(iBu)DPA, L] has been investigated. The equilibrium data have been explained assuming that the species HL⁺, HL₂ ⁺, CaL₂ ²⁺, SrL₂ ²⁺ and SrL₃ ²⁺ are extracted into the organic phase. The values of extraction and stability constants of the cationic complexes in nitrobenzene saturated with water have been determined.     

10 α -Hydroxy- β -isomorphine, a by-product of the synthesis of 10 α -hydroxymorphine

Abstract  

A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues.     

Studies on the radiolytic stability of N,N,N′,N′-tetra-2-ethylhexyl diglycolamide in n-dodecane solution containing different phase modifiers

The radiolytic stability of a branched diglycolamide extractant, namely N,N,N′,N′-tetra-2-ethylhexyl diglycolamide (T2EHDGA) dissolved in n-dodecane containing several phase modifiers, viz. N,N-dihexyloctanamide (DHOA), tri-n-butyl phosphate (TBP), 1-decanol and iso-decanol has been investigated. The distribution ratio of Am(III) decreased with increased radiation dose studied up to 1000 kGy. Nevertheless, all the composition of extractants showed satisfactory results up to 500 kGy, beyond which the extractants degraded drastically. The stripping behaviour of Am(III) with 0.2 M HNO₃ was found to be unaffected even with the ligand solution irradiated up to 1000 kGy. Extraction of fission product and structural elements was also investigated using the irradiated solvents and was found to be not significantly affected with increasing absorbed dose with the exception of Mo which showed sharp rise in the distribution coefficient values. Loading of Nd in the organic phase decreased with the irradiated solvent due to degradation of the carrier. The effect of the absorbed dose on physical parameters such as density, viscosity and interfacial tension of the solvents has also been investigated.     

Rare earth metal-rich indides RE 4IrIn ( RE = Gd–Er), RE 4IrInO0.25 ( RE = Gd, Er), and RE 4 T In1– x Mg x ( RE = Y, Gd; T = Rh, Ir)

The rare earth-transition metal-indides RE ₄IrIn (RE = Gd–Er) and the solid solutions RE ₄ TIn_1–x Mg _x (RE = Y, Gd; T = Rh, Ir) were prepared by arc-melting of the elements and subsequent annealing. The rare earth sesquioxides were used as oxygen source for the suboxides RE ₄IrInO_0.25 (RE = Gd, Er). Single crystals of the indides were grown via slowly cooling of the samples and they were investigated via X-ray powder diffraction and single crystal diffractometer data: Gd₄RhIn type, F 3m, a = 1372.3(6) pm for Gd₄IrIn, a = 1365.3(6) pm for Tb₄IrIn, a = 1356.7(4) pm for Dy₄IrIn, a = 1353.9(4) pm for Ho₄IrIn, a = 1344.1(4) pm for Er₄IrIn, a = 1370.3(5) pm for Y₄RhIn_0.54Mg_0.46, a = 1375.6(5) pm for Gd₄IrIn_0.55Mg_0.45, a = 1373.0(3) pm for Gd₄IrInO_0.25, and a = 1345.1(4) pm for Er₄IrInO_0.25. The rhodium and iridium atoms have a trigonal prismatic rare earth coordination. Condensation of the RhRE ₆ and IrRE ₆ prisms leads to three-dimensional networks which leave voids that are filled by regular In₄ or mixed In_4–x Mg _x tetrahedra. The indium (magnesium) atoms have twelve nearest neighbors (3In(Mg) + 9RE) in icosahedral coordination. The rare earth atoms build up a three-dimensional, adamantane-like network of condensed, edge and face-sharing octahedra. For Gd₄IrInO_0.25 and Er₄IrInO_0.25 the RE1₆ octahedra are filled with oxygen. The crystal chemical peculiarities of these rare earth rich compounds are discussed. Correspondence: Rainer P?ttgen, Institut für Anorganische und Analytische Chemie, Westf?lische Wilhelms-Universit?t Münster, Germany.     

Stabilities and coordination modes of glycinephosphonic acid in copper(II) heteroligand complexes with ethylenediamine, diethylenetriamine or N,N,N′,N′,N″-pentamethyldiethylene triamine in aqueous solution

Solution equilibrium studies on the Cu(II)-polyamine-(aminomethyl)phosphonic acid (glycinephosphonic acid) ternary systems (polyamine: ethylenediamine (en), diethylenetriamine (dien), N,N,N′,N′,N″-pentamethyldiethylenetriamine (Me₅dien)) have been performed by pH-potentiometry, UV–vis spectrophotometry and EPR methods. The obtained results suggest the formation of the heteroligand complexes with [Cu(A)(Gly(P))] stoichiometry in all studied systems. Additionally, in the systems with dien the protonated [Cu(dien)(H–Gly(P))]⁺ species also exists in acid solution and in the system with en the [Cu(en)(Gly(P))H_-1]⁻ species is formed in the basic solution. Our spectroscopic results indicate the tetragonal geometry for the [Cu(en)(Gly(P))] species, the geometry slightly deviated from square pyramidal for the [Cu(dien)(Gly(P))] complex and strongly deviated from square pyramidal towards trigonal bipyramidal for the [Cu(Me₅dien)(Gly(P))] species. The coordination modes in these heteroligand complexes are discussed.     

Rare earth metal-rich indides RE 4IrIn ( RE = Gd–Er), RE 4IrInO0.25 ( RE = Gd, Er), and RE 4 T In1– x Mg x ( RE = Y, Gd; T = Rh, Ir)

The rare earth-transition metal-indides RE ₄IrIn (RE = Gd–Er) and the solid solutions RE ₄ TIn_1–x Mg _x (RE = Y, Gd; T = Rh, Ir) were prepared by arc-melting of the elements and subsequent annealing. The rare earth sesquioxides were used as oxygen source for the suboxides RE ₄IrInO_0.25 (RE = Gd, Er). Single crystals of the indides were grown via slowly cooling of the samples and they were investigated via X-ray powder diffraction and single crystal diffractometer data: Gd₄RhIn type, F [`4]\bar 4 3m, a = 1372.3(6) pm for Gd₄IrIn, a = 1365.3(6) pm for Tb₄IrIn, a = 1356.7(4) pm for Dy₄IrIn, a = 1353.9(4) pm for Ho₄IrIn, a = 1344.1(4) pm for Er₄IrIn, a = 1370.3(5) pm for Y₄RhIn_0.54Mg_0.46, a = 1375.6(5) pm for Gd₄IrIn_0.55Mg_0.45, a = 1373.0(3) pm for Gd₄IrInO_0.25, and a = 1345.1(4) pm for Er₄IrInO_0.25. The rhodium and iridium atoms have a trigonal prismatic rare earth coordination. Condensation of the RhRE ₆ and IrRE ₆ prisms leads to three-dimensional networks which leave voids that are filled by regular In₄ or mixed In_4–x Mg _x tetrahedra. The indium (magnesium) atoms have twelve nearest neighbors (3In(Mg) + 9RE) in icosahedral coordination. The rare earth atoms build up a three-dimensional, adamantane-like network of condensed, edge and face-sharing octahedra. For Gd₄IrInO_0.25 and Er₄IrInO_0.25 the RE1₆ octahedra are filled with oxygen. The crystal chemical peculiarities of these rare earth rich compounds are discussed.     

Stabilities and Coordination Modes of α-Alaninephosphonic Acid in Copper(II) Heteroligand Complexes with Ethylenediamine, Diethylenetriamine or N,N,N′,N′,N″-Pentamethyldiethylene Triamine in Aqueous Solution

Solution equilibrium studies on Cu²⁺–L₁–L₂ ternary systems have been performed by pH-potentiometry, UV–Vis spectrophotometry and EPR methods (L₁ corresponds to polyamines such as ethylenediamine (en), diethylenetriamine (dien), or N,N,N′,N′,N″-pentamethyldiethylenetriamine (Me₅dien) and L₂ represents 1-aminoethylphosphonic acid (α-alaninephosphonic acid)). The obtained results suggest the formation of heteroligand complexes with [Cu(L₁)(α-Ala(P))] stoichiometry in all studied systems. Additionally, in the system with en the [Cu(en)(α-Ala(P))H₋₁]⁻ species is formed in basic solution. Our spectroscopic results indicate tetragonal geometry for the [Cu(en)(α-Ala(P))] species, geometry slightly deviated from square pyramidal for the [Cu(dien)(α-Ala(P))] complex and strongly deviated from square pyramidal towards trigonal bipyramidal for the [Cu(Me₅dien)(α-Ala(P))] species. The coordination modes in these heteroligand complexes are discussed.     

Ab Initio Modeling of Interatomic Interactions in 3C–SiC:M, M = Cr, Mn, Fe, Co

The electronic structure and chemical binding parameters of impurity atoms M = Cr, Mn, Fe, Co in cubic silicon carbide are considered in DFT (density functional theory) and X-DV (discrete variation) approximations. A scheme for calculating the binding energies in the cluster approach is suggested. Stoichiometric and superstoichiometric models of impurity incorporation are investigated. The binding energy is higher for the stoichiometric model. In the superstoichiometric model, the titanium and iron atoms preferably occupy the Si₄ interstice. For all other atoms, the MSi, Sii model is preferable. The incorporated impurity weakens the basic Si–C bonds.     

Extraction of U(VI) with N,N′-dimethyl-N,N′-dioctylmalonamide from nitrate media

The extraction of uranyl nitrate with the novel extractant N,N′-dimethyl-N,N′-dioctylmalonamide (DMDOMA) from aqueous sodium nitrate (and nitric acid) was investigated. The extraction mechanism was established and the stoichiometry of the main extracted species confirms to UO₂(NO₃)₂ · DMDOMA. The IR spectral study was also made of the extracted species. Methyl substituent improves the extraction ability of malonamide for U(VI) compared with that of N,N,N′,N′-tertrabutylmalonamide (TBMA).     

Modeling Ar and Kr matrix effect on the ν s (Cl–H) and ν l (Cl–H) of Cl–H···NH3 by the IEF-PCM method

Ar and Kr matrix effect on the geometry and Cl–H stretching (ν _s (Cl–H)) and librational (ν _l (Cl–H)) frequencies of the hydrogen-bonded complex Cl–H···NH₃ are simulated within the framework of polarizable continuum model with integral equation formalism (IEF-PCM) at B3LYP and MP2 levels of theory with the basis set 6-311++G(2df,2pd). Within the framework of B3LYP and IEF-PCM, the simulated gas phase, Ar, and Kr matrix ν _s (Cl–H) of the complex are 2140, 1684, and 1550 cm⁻¹, respectively, which deviate from the experimental values (~2200, 1371, and 1218 cm⁻¹) by −60, 313, and 332 cm⁻¹. Within the framework of MP2 and IEF-PCM, the gas phase, Ar, and Kr matrix ν _s (Cl–H) are calculated as 2366, 2037, and 1957 cm⁻¹ by the harmonic approximation, and as 2177, 1876, and 1665 cm⁻¹ by the full-dimensional anharmonic correction. The matrix effect modeling is of greater importance than the anharmonic correction in accounting for the large experimental gas phase to Ar or Kr matrix shift of the ν _s (Cl–H) (−829 or −982 cm⁻¹). Our calculations do not support the assignment of the 733.8 and 736.9 cm⁻¹ bands to the Ar and Kr matrix ν _l (Cl–H).     

CH3SOx (x＝0, 1)与三线态Oy (y＝1, 2, 3)反应机理的理论研究

采用B3LYP方法和6-311G(d, p)基组对CH₃S及其氧化后继物CH₃SO与O_y (y＝1, 2, 3)反应形成酸雨的微观机理进行了理论研究. 对反应势能面上的各驻点进行几何构型全优化. 振动分析和IRC计算证实了中间体和过渡态的真实性和相互连接关系. 找到了7条生成SO₂的反应途径, 其中CH₃S与O直接反应得到产物CH₃和SO最容易进行; CH₃S先与O₃反应, 其产物再与O₃反应得到CH₃SO₂, CH₃SO₂最后分解得到CH₃S和SO₂较容易进行, 其它的反应较难进行.     

Preparation and trans–cis isomerization of azobenzene-containing TiO2/ormosils hybrid films derived at a low temperature sol–gel process for photonic applications

Azobenzene-containing TiO₂/γ-glycidoxypropyltrimethoxysilane and methyltrimethoxysilane hybrid films are prepared by combining a low temperature sol–gel process and a spin-coating technique. The trans–cis isomerization of azobenzene small molecules inside organic–inorganic hybrid films is induced by a photoirradiation under UV light. It is noted that below a baking temperature of 150 °C is necessary for the hybrid films in optical storage or optical switching applications. The change of the refractive index and thickness of the hybrid films with real-time heating temperature are observed by using a prism coupling technique. The structural properties of the hybrid films are also characterized and investigated by thermal gravimetric analysis, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The results indicate that the as-prepared hybrid films might allow directly integrating the optical storage or optical switching devices with the waveguide devices on the same chip.     

Synthesis and crystal structure of a new tetradecker complex: Tetra(μ4-N,N′-Ethylen-bis(3-Methoxysalicylideneamine)-bis(μ2-perchlorato-O,O′)-tetranickel(II)-tripotassium perchlorate

The title tetradecker complex C₇₂H₇₂Cl₃K₃N₈Ni₄O₂₈ has been synthesized and structurally characterized. The four NiL (L = N, N-ethylene-bis(3-methoxysalicylideneiminate) segments were linked into a discrete tetradecker structure by three K⁺ cation coordinated to the phenolic oxygen atoms of the neighboring NiL units and the oxygen atom of the ClO₄⁻ anions acting as bridges. The two bicephalous K⁺ cations are nine-coordinated, while the middle one is involved in a distorted bipentagonal pyramid. For the Ni²⁺ ion, it is involved in a square planar coordination sphere formed by a N₂O₂ unit from the Schiff base ligand.     

Ab initio study of the structure and stability of ThF n(4?n)+ complexes (n = 1–8)

The structural and energetic characteristics of ThF _n ⁽⁴⁻ⁿ⁾⁺ (n = 1–8) complexes have been calculated by the ab initio RHF and MP2 methods.     

NASICON phases of variable composition K1? x A1? x R1+ x (MoO4)3 (0 ≤ x ≤ 0.2–0.6), where A = Ni, Mg, Co, or Mn and R = Yb, Lu, or Sc

Phases of variable composition K_1−x A_1−x R_1+x (MoO₄)₃) (0 ≤ x ≤ 0.2–0.6), where A = Ni, Mg, Co, or Mn and R = Yb, Lu, or Sc, which crystallize in a NASICON-type structure (space group R c) were synthesized by solid-phase reactions. Their crystal parameters were calculated, and IR and Raman spectra described. Original Russian Text ? N.M. Kozhevnikova, T.N. Khamaganova, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 5, pp. 864–865.     

Surface active and aggregation behavior of methylimidazolium-based ionic liquids of type [Cnmim] [X], n?=?4, 6, 8 and [X]?=?Cl?, Br?, and I? in water

The surface active and aggregation behavior of ionic liquids of type [C _n mim][X] (1-alkyl-3-methylimidazolium (mim) halides), where n = 4, 6, 8 and [X] = Cl⁻, Br⁻ and I⁻ was investigated by using three techniques: surface tension, ¹H nuclear magnetic resonance (NMR) spectroscopy, small-angle neutron scattering (SANS). A series of parameters including critical aggregation concentrations (CAC), surface active parameters and thermodynamic parameters of aggregation were calculated. The ¹H NMR chemical shifts and SANS measurements reveal no evidence of aggregates for the short-chain 1-butylmim halides in water and however small oblate ellipsoidal shaped aggregates are formed by ionic liquids with 1-hexyl and 1-octyl chains. Analysis of SANS data analysis at higher concentrations of [C₈mim][Cl] showed that the microstructures consist of cubically packed molecules probably through π–π and hydrogen bond interactions.     

(p, ρ, T, x) properties for CO2/isobutane binary mixtures at T = (280 to 440) K and (3 to 200) MPa

The (p, ρ, T, x) properties for binary mixtures of CO₂ (volume fraction purity 0.99999) and isobutane (mole fraction purity 0.99988) {x₁ CO₂ + x₂ isobutane (x₁ = 0.2482, 0.4718, and 0.7506)} were measured in the compressed liquid phase using a metal-bellows variable volumometer. Measurements were conducted from T = (280 to 440) K and (3 to 200) MPa. The expanded uncertainties (k = 2) were estimated to be: temperature, <3 mK; pressure, 1.5 kPa (p ? 7 MPa), 0.06% (7 MPa < p ? 50 MPa), 0.1% (50 MPa < p ? 150 MPa), 0.2% (p > 150 MPa); density, 0.10%; and composition, 4.4 · 10⁻⁴. At >100 MPa and T = (280 or 440) K, the uncertainties in the density measurements increased to 0.14% and 0.22%, respectively. The data are compared with the available equation of state. The excess molar volumes, , of the mixtures were calculated and plotted as a function of temperature and pressure.