Studies of aminolysis of acrylonitrile–divinylbenzene–methyl methacrylate copolymers

Aminolysis of nitrilacrylate–divinylbenzene–methyl methacrylate copolymers by diethylenetriamine is studied under various conditions. The effect of temperature and catalyst concentration on the properties of synthesized anion exchangers depending on the duration of aminolysis is investigated. The conditions for synthesizing anion exchangers with high capacity characteristics are proposed according to the study results.     

The nature of sites of absorption of low-molecular-mass compounds by butadiene–acrylonitrile copolymers

The rotational mobilities of the paramagnetic probes TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) and BZONO (4-benzoate-2,2,6,6-tetramethylpiperidine-1-oxyl) are studied via EPR spectroscopy and the equilibrium swelling of random and multiblock butadiene–acrylonitrile copolymers of various compositions and stereostructures of butadiene units in n-heptane, methyl acetate, and toluene are studied. The nature of defective regions sorbing low-molecular-mass compounds is ascertained. The rotational mobilities of the probes in defects of various structures are estimated. The sites of sorption are found to be identical in crosslinked and noncrosslinked elastomers. It is shown that the sorption of n-heptane and methyl acetate appears in the same defective regions as those of the TEMPO radical, while the sorption of toluene emerges in sorption sites where the value of free volume is sufficient for the sorption of the bulky radical BZONO. A decay in local molecular mobility in structural defects (“holes”) does not hinder the absorption of lowmolecular- mass compounds if the free volume is sufficient.     

Influence of the composition of acrylamide–acrylonitrile–2-acrylamido-2-methylpropanesulfonic acid terpolymer on its resistance to high temperatures and salts

The influence of the ratio of the acrylamide, acrylonitrile, and 2-acrylamido-2-methylpropanesulfonic acid monomeric units in the terpolymer on its resistance to elevated temperatures and sensitivity to calcium salts was studied. The influence of the terpolymer composition on the chemical transformations occurring under the conditions of thermal and hydrothermal treatment was studied by TGA and IR spectroscopy. The degree of hydrolysis of the terpolymers influences their resistance to CaCl₂. The resistance of the terpolymers to CaCl₂ additions at their concentrations of up to 7 wt % is preserved at the content of 2-acrylamido-2-methylpropanesulfonic acid units higher than 20 mol %. The revealed features allow optimization of the structure of polymer systems used in drilling lubricants.     

A method for the quantification of biomarkers of exposure to acrylonitrile and 1,3-butadiene in human urine by column-switching liquid chromatography–tandem mass spectrometry

1,3-Butadiene and acrylonitrile are important industrial chemicals that have a high production volume and are ubiquitous environmental pollutants. The urinary mercapturic acids of 1,3-butadiene and acrylonitrile—N-acetyl-S-(3,4-dihydroxybutyl)cysteine (DHBMA) and MHBMA (an isomeric mixture of N-acetyl-S-((1-hydroxymethyl)-2-propenyl)cysteine and N-acetyl-S-((2-hydroxymethyl)-3-propenyl)cysteine) for the former and N-acetyl-S-2-cyanoethylcysteine (CEMA) for the latter—are specific biomarkers for the determination of individual internal exposure to these chemicals. We have developed and validated a fast, specific, and very sensitive method for the simultaneous determination of DHBMA, MHBMA, and CEMA in human urine using an automated multidimensional LC/MS/MS method that requires no additional sample preparation. Analytes are stripped from urinary matrix by online extraction on a restricted access material, transferred to the analytical column, and subsequently determined by tandem mass spectrometry using labeled internal standards. The limits of quantification (LOQs) for DHBMA, MHBMA, and CEMA were 10 μg/L, 2 μg/L, and 1 μg/L urine, respectively, and were sufficient to quantify the background exposure of the general population. Precision within series and between series for all analytes ranged from 5.4 to 9.9%; mean accuracy was between 95 and 115%. We applied the method on spot urine samples from 210 subjects from the general population with no occupational exposure to 1,3-butadiene or acrylonitrile. A background exposure of the general population to acrylonitrile was discovered that is basically influenced by individual exposure to passive smoke as well as active smoking habits. Smokers showed a significantly higher excretion of MHBMA, whereas DHBMA levels did not differ significantly. Owing to its automation, our method is well suited for application in occupational or environmental studies. Figure Boxplots of the results from LC/ESI-MS/MS analysis of urinary excretion of CEMA reveal a strong correlation with nicotine metabolite cotinine, indicating that exposure to passive smoke as well as active smoking is the main source of exposure to acrylonitrile in the general population     

Preparation of an ultrafiltration membrane from the copolymer of acrylonitrile–glycidylmethacrylate utilized for immobilization of glucose oxidase

Ultrafiltration membrane has been prepared from the copolymer of acrylonitrile–glycidylmethacrylate and the porosity of the membrane was studied. The asymmetric structure was proved by scanning electron microscopy. The basic characteristics of the membrane were measured – water permeability, water content, membrane selectivity, etc. The membrane obtained was used as a carrier for immobilization of glucose oxidase. The immobilization was carried out covalently by two methods: direct bonding of the enzyme and indirectly by a spacer (hexamethylenediamine) and cross-linking agent (glutar aldehyde). The amount of bound protein and relative activity of the immobilized glucose oxidase were determined. Temperature optimum, pH optimum and storage stability of the immobilized glucose oxidase were determined. It was proved that glucose oxidase immobilized by the direct method shows better characteristics compared with the indirect method.     

Rheology of linear and branched styrene–acrylonitrile copolymers. Similarities and differences

A comprehensive investigation of rheological properties of linear and branched styrene-acrylonitrile copolymer specimens with similar molecular characteristics has been carried out. During the steady-state shear flow, the viscosity properties of both specimens are described by the Cross equation. In this case, the branched copolymer is characterized by a higher viscosity and shear thinning degree as well as by substantially lower shear rate values corresponding to transition to the non-Newtonian flow region. The elasticity of the branched copolymer melt (estimated from the value of the first normal stress difference) is considerably higher than that of the linear. This is reflected on the characteristics of occurrence of unstable flow at high shear rates. Rougher extrudate surface distortions are characteristic for the branched copolymer, and the shear rate corresponding to their occurrence is noticeably lower than for the linear copolymer. The dynamic characteristics of the copolymers being compared also attest to a greater elasticity of the branched specimen. An investigation of the viscoelastic properties in a wide temperature range allowed constructing a generalized frequency dependence of dynamic moduli encompassing various regions of the relaxation states of the copolymer specimens. Continuous relaxation spectra were calculated by means of the Mellin transform. It is shown that relaxation phenomena caused by segmental mobility doesn’t depend on the presence of branchings, whereas branching of the chain has a substantial effect on translation mobility of the chain as a whole. Branching leads to a noticeable increase of transient elongation viscosity but has almost no effect of strain hardening of the melt.     

Thermal characterization of the effect of fillers and ionic liquids on the vulcanization and properties of acrylonitrile–butadiene elastomer

Different thermal analysis techniques were used to study the effect of fillers and ionic liquids (ILs) on the vulcanization process, thermal and dynamic mechanical properties of acrylonitrile–butadiene elastomer (NBR). The products of the studies were composites of NBR filled with hydrotalcite, nanosized silica or carbon black. ILs such as 1-butyl-1-methylpyrrolidinium (BMpyrrolBF₄), 1-butyl-4-methylpyridinium (BMpyrBF₄) or 1-butyl-1-methylpiperidinium (BMpipBF₄) tetrafluoroborates were applied to improve the dispersion degree of the curatives and filler particles in the elastomer and to increase the efficiency of vulcanization. The differential scanning calorimetry results indicated that ILs reduced the vulcanization temperature of NBR compounds and increased the homogeneity of cross-link distribution in the elastomer network. NBRs filled with carbon black or silica exhibited similar thermal stabilities, whereas hydrotalcite reduced the temperature of thermal decomposition. The lowest mechanical loss factors were determined for vulcanizates filled with nanosized silica.

     

Effect of a novel charring agent on thermal degradation and flame retardancy of acrylonitrile–butadiene–styrene

A novel charring agent poly(p-propane terephthalamide) (PPTA) was synthesized by using terephthaloyl chloride and 1,3-propanediamine through solution polycondensation and it was used together with ammonium polyphosphate (APP) to prepare a novel intumescent flame retardant (IFR) for ABS. The thermal degradation behaviour and flame retardancy were investigated, the results showed that PPTA could be effective as a charring agent, the flame retardancy of ABS and the mass of residues improved greatly with the addition of IFR. When the content of APP was 22.5 mass% and PPTA was 7.5 mass%, the limiting oxygen index (LOI) value of IFR-ABS system was found to be 32.4, and class V-0 of UL-94 test was passed. Moreover, the synergistic effects of two different adjuvants AlPi and MnO₂ in IFR-ABS system have been studied.     

Effects of fabrication conditions on the structure and function of membranes formed from poly(acrylonitrile–vinylchloride)

Phase-inversion membranes formed from poly(acrylonitril–co-vinylchloride) (PAN–PVC) have been utilized for encapsulating living cells for transplantation; however, a detailed analysis of the structure and function of the integral skin layer has not been reported. PAN–PVC membranes fabricated under different precipitation conditions were analyzed using microscopic techniques and several functional tests. Structural analysis with scanning atomic force microscopy (AFM) revealed the presence of nodular elements in the skin layer which changed as a function of precipitation conditions. In addition, membrane hydraulic permeabilities, sieving coefficients, and diffusive permeabilities also varied with precipitation conditions. Furthermore, changes in the functional properties could be related to the size of the nodular elements and their accompanying interstitial space. The results provide insight into the fundamental interrelationships that exist between membrane fabrication, the fine surface morphology of the skin layer, and membrane performance.     

Addition of polyfluoropolyhaloethanes to alkenes

In the presence of CrCl3/Fe redox system, polyfluoropolyhaloethanes readily added to electron-deficient or electron-rich alkenes, giving the corresponding 1:1 hydropolyfluoroalkyla-tion product or 1:1 adduct in high yields. This reaction provided a simple and convenient method to synthesize building blocks containing a CF3 or CF2 moiety.     

Chemoenzymatic synthesis of chiral substituted acrylate and acrylonitrile precursors for the synthesis of 3-deoxy-2-ulosonic acids and α-methylene-γ-lactones

Substituted acrylonitrile and ethyl acrylate bearing a masked α-hydroxyaldehyde were easily synthesised by a Barbier type reaction between the monoacetal of glyoxal and bromomethyl acrylonitrile or ethyl bromomethyl acrylate. We prepared these interesting synthons in an enantiomerically pure form by enzymatic resolution with Candida rugosa lipase, or by microbial reduction of the corresponding ketones using Aspergillus niger and Lactobacillus kefir.     

Viscoelastic properties and morphology of dicyanate ester/epoxy co-polymers modified with polysiloxane and butadiene–acrylonitrile rubbers

Dynamic mechanical analysis was conducted on specimens prepared from cyanate ester (CE) and epoxy (EP) resins cured together at various mass compositions. Increase of amount of epoxy resin in composition was shown to have a disadvantageous effect on glass transition temperature (T _g). It was shown that post-curing procedure was needed to produce a polymer matrix with a single glass transition relaxation, but increase in post-cure temperature up to 250 °C resulted in slight reduction in T _g for epoxy/cyanate copolymers. TG results proved that the presence of epoxy resin reduces thermal stability of the cyanate/epoxy materials. The neat CE and EP/CE systems containing 30 wt% of epoxy resin were modified using epoxy-terminated butadiene–acrylonitrile rubber (ETBN) and polysiloxane core–shell elastomer (PS). The scanning electron microscopy (SEM) results showed the existence of second phase of ETBN and PS modifiers. Only in the case of EP/CE composition modified with ETBN, well-dispersed second phase domains were observed. Analysis of SEM images for other CE- and EP/CE-modified systems revealed the formation of spherical aggregates.     

Effect of sol–gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

Silica particles were generated and grown in situ by sol–gel method into rubber blends comprised of natural rubber (NR) and acrylonitrile butadiene rubber (NBR) at various blend ratios. Silica formed into rubber matrix was amorphous in nature. Amount of in situ silica increased with increase in natural rubber proportion in the blends during the sol–gel process. Morphology studies showed that the generated in situ silica were nanoparticles of different shapes and sizes mostly grown into the NR phase of the blends. In situ silica filled NR/NBR blend composites showed improvement in the mechanical and dynamic mechanical behaviors in comparison to those of the unfilled and externally filled NR/NBR blend composites. For the NR/NBR blend at 40/60 composition, in particular, the improvement was appreciable where size and dispersion of the silica particles into the rubber matrix were found to be more uniform. Dynamic mechanical analysis revealed a strong rubber–in situ silica interaction as indicated by a positive shift of the glass transition temperature of both the rubber phases in the blends.     

Reductive Deoxygenation of Carbonyl to Methylene

The reductive deoxygenation of aldehydes and ketones into the corresponding alkanes is accomplished by LiAlH4, in the presence of Lewis acid InBr3. It provides a convenient method to complete the transformation from carbonyl compounds to alkanes.     

Rheological Behavior of Dope Solutions of Poly(acrylonitrile‐co‐itaconic acid) in N,N‐dimethylformamide: Effect of Polymer Molar Mass

The rheological behavior of dope solutions of poly(acrylonitrile‐co‐itaconic acid) or poly(AN‐co‐IA) is important from the point of view of deriving the spinning conditions for good quality special acrylic fibers. The viscosity of the resin dope is dictated by the polymer concentration, molar mass, temperature and shear force. The dynamic shear rheology of concentrated poly(AN‐co‐IA) polymer dope solutions in N, N‐dimethylformamide, in the molar mass (M¯_v) range of 1×10⁵ to 1×10⁶ g/mol, was investigated in the shear rate (γ′) range of 1×10¹ to 5×10⁴ min^?1. An empirical relation between η and M¯_v was found to exist at constant shear rate. The dope viscosity was dependent on the molar mass and the shear rate at a given temperature (T) and concentration. The polymer molar mass index of dope viscosity (m) was calculated as functions of concentration (c), shear rate and temperature. The m values increased with shear rate and temperature. A master equation relating m, with shear rate and temperature was derived for a given dope concentration. At higher shear rates, m tends to the value of 3.4, which is close to the molar mass index of viscosity reported for molten thermoplastics. m increased significantly with shear rate and nominally with temperature, while an increase in concentration decreased it. The onset of shear thinning of the dope shifted to a lower shear rate regime with an increase in polymer concentration and the molar mass. For a given value of molar mass, the increase in viscosity of the dope solution with polymer concentration was dependent on the shear rate.     

Application of Calcite Veins to Study of Newly-activated Faulting

The study of period and chronology of fault activity in major worksites in an area with exposed basement rocks is quite difficult. The authors have applied the combinative techniques of field investigation, microscopic observation and isotopic dating to studying the calcite veins filled in the fault zones in several major engineering regions and got successful results. The following conclusions are reached: (i) The last period of strong activity of fault F8 in the Tianshengqiao Hydropower Station, Nanpan River is 200 ka B. P. , and there has been, no obvious activity since 150 ka. (ii) The last period of strong activity for 5 faults in Shixiali Reservoir, Yangyuan County, Hebei Province is 200-300 ka B. P. , and there has been no obvious activity since 200 ka. The research results provide a sound basis of engineering geology for project designers.     

Zinc-Mediated Addition of Bromoacetonitrile to Aldimines

Thecarbon-nitrogendoubleb0ndhaselectrophilicityandtlleadditi0nofcarbonnucle0-plillestocarbon-nitf0gendoublebondinilninesconstitutesanimpohalltmeti1odforti1eprepamtionofsecondnyamines.Asaclleapai1defficientreagentmetalliczinchasbeenwidelyusedinil1eallylationofaldehydesandket0nes',aswellasilnines2.Itissh0wnll1atzinclinsalilghreactivitytomediatehleforlnation0fcarbon-carbonbondundermildreachoncondihons,anditwouldhaVeawiderusein0rganicSynti1esis.BecauseofitselectronwitlldrawiIlgproperty,llleCNgro…     

Enhancing oil–water emulsion separation using improved styrene–acrylonitrile copolymer membrane: Experimental and thermodynamic study of the impact of solvent mixtures

This study investigated the fabrication of styrene–acrylonitrile copolymer (SAN) membrane using the nonsolvent-induced phase separation (NIPS) method with a combination of solvents, namely N-methyl-2-pyrrolidone (NMP) and dimethylformamide (DMF) and water as the nonsolvent. Since the impact of varying solvent ratios on SAN membrane performance remained unexplored, this study aimed to address this knowledge gap in the context of oil–water emulsion separation. Experimental results demonstrated that employing a solvent mixture, rather than a pure solvent, led to improved membrane performance. The primary objective of this work was to experimentally determine the optimal solvent ratio for enhancing SAN copolymer membrane performance. Additionally, the Flory–Huggins thermodynamic model was applied to investigate the possibility of predicting membrane binodal data. The thermodynamic analysis revealed a strong agreement between calculated and experimental binodal data, with an error of less than 3.8%. Notably, membranes produced with an equal solvent ratio exhibited the most hydrophilic properties, resulting in increased permeability. The permeate flux for distilled water reached 320 L/(m² h) (LMH), and water contact angle of the membrane was 22°. Furthermore, mechanical resistance increased up to 50%. These results highlight the promising potential of fabricating SAN membrane using solvent mixtures for oil–water emulsion separation.