Janus材料微结构精细调控进展

Janus材料由于其拥有两个具有不同化学组成的表面而备受关注,其特殊的结构和性能已成为材料科学研究热点.如何实现Janus材料形貌可控、化学组成严格分区、不同位点复合功能分区、微结构精细调控和批量化制备是该研究方向中的重点和难点.针对上诉问题,基于本课题组研究工作,本文总结了Janus材料微结构精确控制和批量化制备的方法,为Janus材料大规模制备和应用提供新思路和新方法.     

Anisotropic janus magnetic polymeric nanoparticles prepared via miniemulsion polymerization

Anisotropic Janus magnetic polymeric nanoparticles are prepared via the miniemulsion polymerization of styrene and acrylic acid monomers in the presence of oleic acid‐coated magnetic nanoparticles (MNPs). The controllable phase separation between the polymer matrix and the encapsulated MNPs is a key success factor to produce Janus morphology. The effects of MNPs, 2,2′‐azobis(2‐isobutyronitrile) and sodium dodecyl sulfate contents, on the morphology, chemical composition and colloidal stability of the prepared Janus hybrid particles are investigated. Besides the determination of polymerization conversion, zeta potential, size analysis, TGA, and TEM are applied for characterization of the anisotropic particles. The results show the stable spherical Janus particles containing MNPs (15 wt % magnetic content) located on one side of each polymer particle. The anisotropic submicron Janus magnetic polymeric particles (250 nm) can be easily separated by an external magnet. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4779–4785     

各向异性金纳米粒子的制备及其在催化中的应用

尽管有关金纳米粒子催化的研究工作很多,但其中大多数都是采用传统的浸渍法将金盐负载到载体上、共沉淀或沉积-沉淀法制得负载的纳米粒子,但这些方法并未吸收最新的纳米技术。最近,金催化剂的研究者开发了在胶态悬浮液中制取金属纳米粒子,然后进行固载,从而使得单金属和双金属催化剂的催化活性和形貌控制取得较大进展。另一方面,最近十年出现了金纳米粒子合成的高级控制技术,得到了许多各向异性的金纳米粒子,且很容易制得新的形貌,可以控制纳米粒子的表面原子配位数和光学特性(可调的等离子体带),这些都与催化密切相关。这些形貌包括纳米棒、纳米星、纳米花、树枝状纳米结构或多面体纳米粒子等。除了高度关注各向异性金纳米粒子的最新开发的制备方法和性质,本综述也清楚地总结了这些纳米粒子独特的催化性能,以及通过提供更高催化性能的金催化剂、控制暴露的活性位,以及热、电和光催化的鲁棒性和可调性,从而给多相催化领域带来令人惊奇的潜在变革。     

Mesoporous silica hybrid membranes for precise size-exclusive separation of silver nanoparticles

One-dimensional (1D) nanomaterials have unique applications due to their inherent physical properties. In this study, hexagonally ordered mesoporous silica hybrid anodic alumina membranes (AAM) were synthesized using template-guided synthesis with a number of nonionic n-alkyl-oligo(ethylene oxide), Brij-type (C(x)EO(y)), which are surfactants that have different molecular sizes and characteristics. The hexagonal mesoporous silicas are vertically aligned in the AAM channels with a predominantly columnar orientation. The hollow mesostructured silicas had tunable pore diameters varying from 3.7 to 5.1 nm. In this synthesis protocol, the surfactant molecular natures (corona/core features) are important for the controlled generation of ordered structures throughout AAM channels. The development of ultrafiltration membranes composed of silica mesostructures could be used effectively in separating silver nanoparticles (Ag NPs) in both aqueous and organic solution phases. This would be relevant to the production of well-defined Ag NPs with unique properties. To create a size-exclusive separation system of Ag NPs, we grafted hydrophobic trimethylsilyl (TMS) groups onto the inner pores of the mesoporous silica hybrid AAM. The immobilization of the TMS groups allowed the columnar mesoporous silica inside AAM to retain this inner pore order without distortion during the separation of solution-phase Ag NPs in organic solvents that may cause tortuous-pore membranes. Mesoporous TMS-silicas inside 1D AAM channels were applicable as a size-exclusive separation system to isolate organic solution-phase Ag NPs of uniform morphology and size.     

Anisotropic metal nanoparticles: Synthesis, assembly, and optical applications

This feature article highlights work from the authors' laboratories on the synthesis, assembly, reactivity, and optical applications of metallic nanoparticles of nonspherical shape, especially nanorods. The synthesis is a seed-mediated growth procedure, in which metal salts are reduced initially with a strong reducing agent, in water, to produce approximately 4 nm seed particles. Subsequent reduction of more metal salt with a weak reducing agent, in the presence of structure-directing additives, leads to the controlled formation of nanorods of specified aspect ratio and can also yield other shapes of nanoparticles (stars, tetrapods, blocks, cubes, etc.). Variations in reaction conditions and crystallographic analysis of gold nanorods have led to insight into the growth mechanism of these materials. Assembly of nanorods can be driven by simple evaporation from solution or by rational design with molecular-scale connectors. Short nanorods appear to be more chemically reactive than long nanorods. Finally, optical applications in sensing and imaging, which take advantage of the visible light absorption and scattering properties of the nanorods, are discussed.     

Epitaxy of helical polyolefins

The structural rules which govern the epitaxial crystallisation of polymers - and especially polyolefins - on organic substrates are established. Illustrative examples involve isotactic and syndiotactic polypropylenes and poly( l-butene). Investigation of the film structure by electron microscopy, electron diffraction and atomic force microscopy reveals some unprecedented features, including in particular the selection of the contact plane according to the chirality of its constituent helices, and direct observation of both right and left hands of polyolefin helices.     

Plasma fluorination of polyolefins

ESCA and contact angle measurements were used to characterize the surfaces of Polyethylene and polypropylene films exposed to SF₆, CF₄, and C₂F₆ plasmas. None of these gases polymerized in the plasma. However, all plasma treatments grafted fluorinated functionalities directly to the polymer surfaces. SF₆ plasmas graft fluorine atoms to a polyolefin surface. CF₄ plasmas also react by a mechanism dominated by fluorine atoms, but with some contribution from CF_x-radical reactions. Although C₂F₆ does not polymerize, the mechanism of grafting is still dominated by the reactions of CF_x radicals. For all gases studied, the lack of polymerization is attributed to competitive ablation and polymerization reactions occurring under conditions of ion bombardment.     

Post-polymerization functionalization of polyolefins

Polyolefins are macromolecular alkanes and include the most familiar and most commercially produced plastic, polyethylene. The low cost of these materials combined with their diverse and desirable property profiles drive such large-scale production. One property that renders polyolefins so attractive is their resistance to harsh chemical environments. However, this attribute becomes a severe limitation when attempting to chemically convert these plastics into value-added materials. Functionalization of polymers is a useful methodology for the generation of new materials with wide ranging applications, and this tutorial review describes both new and established methods for the post-polymerization modification of polyolefins.     

Catalytic degradation of polyolefins

Silica, alumina, silica-aluminas and zeolites were screened as catalysts for polyolefins degradation. The degradations were carried out at temperatures from 200°C till to 600°C under vacuum. The degradation products were analyzed using gas chromatography-mass spectrometry (GC-MS). The comparison between these products and those obtained by thermal degradation in the absence of catalyst gives us many informations about the different mechanisms of the two degradation reactions. Kinetic measurements and thermogravimetry provided further useful data for screening the catalysts, finding the best operating conditions.     

Adhesion mechanisms of grafted polyolefins

By comparing surface properties assessed by wettability measurements with polymer-metal adhesion strength determined by peeling for different grafted polyolefins (acrylic acid grafted polyethylene, acrylic acid and maleic anhydride grafted poly(ethylene-vinyl acetate), maleic anhydride grafted polypropylene), a general adhesion mechanism can be proposed. The surface polarity is not the main determining parameter for adhesion. Polyolefin-aluminium adhesion is obtained through chemical bonding of acid groups grafted in the polymer bulk and basic groups present on the aluminium.     

Anisotropic magnetic porous assemblies of oxide nanoparticles interconnected via silica bridges for catalytic application

We report the microfluidic chip-based assembly of colloidal silanol-functionalized silica nanoparticles using monodisperse water-in-oil droplets as templates. The nanoparticles are linked via silica bridges, thereby forming superstructures that range from doublets to porous spherical or rod-like micro-objects. Adding magnetite nanoparticles to the colloid generates micro-objects that can be magnetically manipulated. We functionalized such magnetic porous assemblies with horseradish peroxidase and demonstrate the catalytic binding of fluorescent dye-labeled tyramide over the complete effective surface of the superstructure. Such nanoparticle assemblies permit easy manipulation and recovery after a heterogeneous catalytic process while providing a large surface similar to that of the individual nanoparticles.     

Cross metathesis functionalization of polyolefins

A cross metathesis strategy is reported for the post-polymerization functionalization of the pendant vinyl groups present in a range of polyolefin architectures. This represents a general strategy for the synthesis of tailored random and block copolymers as well as homopolymers.     

Ageing of surface treated thermoplastic polyolefins

Thermoplastic polyolefin panels were treated with a flame, flame & water, and accelerated thermo molecular adhesion process (ATmaP) treatment. XPS, contact angle and adhesion test (pull off) results were acquired over a one year period to determine the changes in the elemental composition, surface energy and adhesion strength respectively over time. All surface-treated thermoplastic polyolefin samples showed a sharp decline in adhesion strength up to an ageing period totalling 6 months. The decline in adhesion strength was correlated with a decline in the nitrogen-containing constituents and C–O functional groups at the surface and a decline in surface energy for the flame & water-treated sample. There was no significant change in adhesion strength for all samples for ageing periods greater than 6 months. ATmaP-treated thermoplastic polyolefin outperformed the other two surface treatments in adhesion strength tests due to ATmaP retaining nitrogen-based functional groups (mainly nitrogen oxides) over the year long study. This retention of functionality allowed for a slower ageing process for ATmaP-treated surfaces in comparison to the other surface treatments.     

Synthesis and microstructure investigation of heterogeneous metal-plasma polymer Ag/HMDSO nanoparticles

Metal-polymer nanocomposites have gained increasing attention due to the wide potential applications field. Synthesis of nanoparticles from the gas phase is an intensively studied alternative to the chemical preparation methods. We present a one-step procedure that combines magnetron-based gas aggregation cluster source of silver nanoparticles and simultaneous plasma-enhanced chemical vapour deposition of hexamethyldisiloxane (HMDSO). The key parameter of the process, significantly influencing the morphology and microstructure of studied nanoparticles, was found to be the amount of HMDSO added to the deposition chamber as witnessed by small angle X-ray scattering and X-ray diffraction methods combined with transmission electron microscopy and UV–Vis spectrophotometry. The presence of HMDSO in the chamber leads to changes in the size distribution and also in the architecture of prepared nanoparticles. The increasing amount of HMDSO induces the formation of individual core-shell nanoparticles, chains of core-shell nanoparticles, and for the highest concentration of HMDSO, the synthesis of multi-core-shell nanoparticles. The size of crystallites in the silver cores of nanoparticles decreases with addition of HMDSO, which prevents further aggregation.     

Metallocene polyolefins and their blends#

Commercial copolymers of 1‐octene and ethylene: metallocene catalyzed (mLLDPE) and Ziegler‐Natta catalyzed (znLLDPE), a low density polyethylene (LDPE), and high density polyethylene (HDPE), were characterized with respect to branching, crystallization behaviour and dynamic‐mechanical properties. It was found that the crystallinity of the polymers is more influenced by the homogeneity of the short‐chain branching than by its content. The study of blends of mLLDPE and znLLDPE with LDPE and HDPE showed that the interaction between mLLDPE and LDPE is stronger than between znLLDPE and LDPE. Blends containing mLLDPE showed a composition depending improvement of the storage modulus G' which was not observed in znLLDPE/LDPE blends. The HPDE blends followed a linear mixing rule. Co‐crystallization was found mLLDPE/LDPE and partially in znLLDPE/LDPE and znLLDPE/HDPE blends, respectively.     

Functionalization of polyolefins by reactive processing

From the study of the modification of PE and PP with maleic anhydride, maleic acid and an acid salt of maleic acid (sodium maleate) in a liquid or solid state, it was shown that the main controlling factor in the solid state modification of polyolefins is the joint plastic deformation of the system components. The changes of molecular characteristics were investigated by gel permeation chromatography. It was shown, that the molecular weight of modified PP samples increases at times by linking with intermolecular associates in the solutions. The formation of associates plays essential role in the behaviour of solutions of modified PP. The morphology of modified PP samples was investigated by scanning electron microscopy. It was shown, that intermolecular association strongly influences on the processes of formation and growth of nucleus and the structure of generated polymeric materials.