Fabrication and properties of thermosensitive organic/inorganic hybrid hydrogel thin films

We report on a facile method for fabricating thermosensitive organic/inorganic hybrid hydrogel thin films from a cross-linkable organic/inorganic hydrid copolymer, poly[ N-isopropylacrylamide- co-3-(trimethoxysilyl)propylmethacrylate] [P(NIPAm- co-TMSPMA)]. Fourier transform infrared (FT-IR) spectra confirmed the formation of hybrid hydrogel thin films after hydrolysis of the methoxysilyl groups (Si-O-CH 3) and subsequent condensation of the silanol groups (Si-OH). Atomic force microscopy (AFM) images revealed that the surface morphology of the hydrogel thin films depended on the supporting substrates. Microdomains were observed for the hydrogel thin films on a gold surface, which can be attributed to inhomogeneous network structures. The thermoresponsive swelling-deswelling behavior and the viscoelastic properties of the hydrogel thin films were investigated as a function of temperature (25-45 degrees C) by using a quartz crystal microbalance (QCM) operated in water. The high frequency shear modulus of the P(NIPAm- co-TMPSMA) hydrogel thin films was several hundred kilopascals.     

Thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) as a nanoreactor of gold nanoparticles

The synthesis of a thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) (PGMA‐co‐PNIPAM) and its application as a nanoreactor of gold nanoparticles are studied. The thermoresponsive copolymer of PGMA‐co‐PNIPAM is first synthesized by the copolymerization of glycidyl methacrylate and N‐isopropylacrylamide using 2,2′‐azobis(isobutyronitrile) as an initiator in tetrahydrofuran at 70 °C and then crosslinked with diethylenetriamine to form a thermoresponsive hydrogel. The lower critical solution temperature (LCST) of the thermoresponsive hydrogel is about 50 °C. The hydrogel exists as 280‐nm spheres below the LCST. The diameter of the spherical hydrogel gradually decreases to a minimum constant of 113 nm when the temperature increases to 75 °C. The hydrogel can act as a nanoreactor of gold nanoparticles because of the coordination of nitrogen atoms of the crosslinker with gold ions, on which a hydrogel/gold nanocomposite is synthesized. The LCST of the resultant hydrogel/gold nanocomposite is similar to that of the hydrogel. The size of the resultant gold nanoparticles is about 15 nm. The hydrogel/gold nanocomposite can act as a smart and recyclable catalyst. At a temperature below the LCST, the thermoresponsive nanocomposite is a homogeneous and efficient catalyst, whereas at a temperature above the LCST, it becomes a heterogeneous one, and its catalytic activity greatly decreases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2812–2819, 2007     

温度及pH敏感聚(丙烯酸)/聚(N-异丙基丙烯酰胺)互穿聚合物网络水凝胶的合成及性能研究

合成聚（丙烯酸）／聚（Ｎ 异丙基丙烯酰胺）互穿聚合物网络（ＰＡＡｃ／ＰＮＩＰＡＩＰＮ）水凝胶，具有温度及ｐＨ双重敏感特性．这种水凝胶在弱碱性条件下的溶胀率远大于酸性条件下的溶胀率．在酸性条件下，随着温度上升，凝胶的溶胀率也随之逐渐上升；而在弱碱性条件下，温度低于聚（Ｎ 异丙基丙烯酰胺）（ＰＮＩＰＡ）的较低临界溶解温度（ＬＣＳＴ）时，溶胀率也随着温度的上升而上升，当温度达到ＬＣＳＴ时，凝胶的溶胀率突然急剧下降，并随着温度的逐渐上升而下降．     

Surface chemical and mechanical properties of plasma-polymerized N-isopropylacrylamide

Surface-immobilized poly(N-isopropyl acrylamide) (pNIPAM) is currently used for a wide variety of biosensor and biomaterial applications. A thorough characterization of the surface properties of pNIPAM thin films will benefit those applications. In this work, we present analysis of a plasma-polymerized NIPAM (ppNIPAM) coating by multiple surface analytical techniques, including time-of-flight secondary-ion mass spectrometry (ToF-SIMS), contact angle measurement, atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. ToF-SIMS data show that the plasma-deposited NIPAM polymer on the substrate is cross-linked with a good retention of the monomer integrity. Contact angle results confirm the thermoresponsive nature of the film as observed by a change of surface wettability as a function of temperature. Topographic and force-distance curve measurements by AFM further demonstrate that the grafted film shrinks or swells depending on the temperature of the aqueous environment. A clear transition of the elastic modulus is observed at 31-32 degrees C. The change of the surface wettability and mechanical properties vs temperature are attributed to different conformations taken by the polymer, which is reflected on the outmost surface as distinct side chain groups orienting outward at different temperatures as measured by SFG. The results suggest that a ppNIPAM thin film on a substrate experiences similar mechanical and chemical changes to pNIPAM bulk polymers in solution. The SFG result provides evidence supporting the current theory of the lower critical solution temperature (LCST) behavior of pNIPAM.     

In situ study of the thermoresponsive behavior of micropatterned hydrogel films by imaging ellipsometry

A patterned hydrogel was immobilized on a polymer substrate by low-pressure argon plasma treatment using a masking technique. The polymer sample showed a thermoresponsive aggregation behavior in the region of 35-37 degrees C. The micropatterned, thermoresponsive hydrogel film has been characterized with imaging ellipsometry. The characterization was carried out on the dry film as well as on a swollen sample in water. The thermoresponsive behavior was studied in deionized water by temperature-dependent measurements in a solid-liquid cell. Through imaging ellipsometry, it was possible to distinguish the different regions of interest on a micrometer scale and to follow the swelling of the hydrogel part as a function of the temperature. It was possible to visualize the swelling as 3D profiles of Delta at various temperatures. Long-term changes of the sample could also be detected, which cannot be picked up by conventional ellipsometry.     

End-grafted low-molecular-weight PNIPAM does not collapse above the LCST

The interfacial properties of end-grafted temperature-responsive poly(N-isopropylacryamide) (PNIPAM) were quantified by direct force measurements both above and below the lower critical solution temperature (LCST) of 32 degrees C. The forces were measured between identical, opposing PNIPAM films and between a PNIPAM film and a lipid membrane. At the grafting densities and molecular weights investigated, the polymer extension did not change significantly above the LCST, and the polymers did not adhere. Below the LCST, the force-distance profiles suggest a vertical phase separation, which results in a diluter outer layer and a dense surface proximal layer. At large separations, the force profiles agree qualitatively with simple polymer theory but deviate at small separations. Importantly, at these low grafting densities and molecular weights, the end-grafted PNIPAM does not collapse above the LCST. This finding has direct implications for triggering liposomal drug release with end-grafted PNIPAM, but it increases the temperature range where these short PNIPAM chains function as steric stabilizers.     

Stimulus-responsiveness and drug release from porous silicon films ATRP-grafted with poly(N-isopropylacrylamide)

In this report, we employ surface-initiated atom transfer radical polymerization (SI-ATRP) to graft a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), of controlled thickness from porous silicon (pSi) films to produce a stimulus-responsive inorganic-organic composite material. The optical properties of this material are studied using interferometric reflectance spectroscopy (IRS) above and below the lower critical solution temperature (LCST) of the PNIPAM graft polymer with regard to variation of pore sizes and thickness of the pSi layer (using discrete samples and pSi gradients) and also the thickness of the PNIPAM coatings. Our investigations of the composite's thermal switching properties show that pore size, pSi layer thickness, and PNIPAM coating thickness critically influence the material's thermoresponsiveness. This composite material has considerable potential for a range of applications including temperature sensors and feedback controlled drug release. Indeed, we demonstrate that modulation of the temperature around the LCST significantly alters the rate of release of the fluorescent anticancer drug camptothecin from the pSi-PNIPAM composite films.     

易衍生化温敏高分子刷的制备及其温敏行为研究

温敏材料由于优异的性能和潜在的应用价值而具有良好的发展前景.利用超分子自组装单层(SAM)与表面引发聚合(SIP)技术将2-(2-甲氧乙氧基)甲基丙烯酸乙酯(MEO2MA)与聚乙二醇甲基丙烯酸酯(OEGMA526)的共聚物poly(MEO2MAco-OEGMA526)接枝于金表面,探索了不同引发剂溶液浓度(χIsol)、单体OEGMA526摩尔浓度(C526)与干态膜厚度(d)对该高分子刷性质的影响.应用石英晶体微天平(QCM)对其温敏行为进行研究,结果表明:在χIsol=1%与C526=5%条件下制备的高分子刷,最低临界溶解温度(LCST)为34℃;其LCST由OEGMA526的单体摩尔浓度决定,不受膜厚的影响.该高分子刷在接枝生物素后其与链霉亲和素的结合实验证明,高分子刷末端的羟基为其官能团化提供了契机.该易衍生化温敏高分子刷为发展新型温敏材料提供了研究基础.     

Recognition‐Mediated Hydrogel Swelling Controlled by Interaction with a Negative Thermoresponsive LCST Polymer

Most polymeric thermoresponsive hydrogels contract upon heating beyond the lower critical solution temperature (LCST) of the polymers used. Herein, we report a supramolecular hydrogel system that shows the opposite temperature dependence. When the non‐thermosesponsive hydrogel NaphtGel, containing dialkoxynaphthalene guest molecules, becomes complexed with the tetra cationic macrocyclic host CBPQT⁴⁺, swelling occurred as a result of host–guest complex formation leading to charge repulsion between the host units, as well as an osmotic contribution of chloride counter‐ions embedded in the network. The immersion of NaphtGel in a solution of poly(N‐isopropylacrylamide) with tetrathiafulvalene (TTF) end groups complexed with CBPQT⁴⁺ induced positive thermoresponsive behaviour. The LCST‐induced dethreading of the polymer‐based pseudorotaxane upon heating led to transfer of the CBPQT⁴⁺ host and a concomitant swelling of NaphtGel. Subsequent cooling led to reformation of the TTF‐based host–guest complexes in solution and contraction of the hydrogel.     

A novel thermoresponsive hydrogel with ion-recognition property through supramolecular host-guest complexation

A novel thermoresponsive hydrogel with ion-recognition property was prepared via free-radical cross-linking copolymerization of N-isopropylacrylamide (NIPAM) with benzo-18-crown-6-acrylamide (BCAm) as host receptor. Both chemical structures and stimuli-sensitive properties of the prepared poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) P(NIPAM-co-BCAm) hydrogel were characterized. The smart hydrogel could respond to both temperature and ion stimuli. When the crown ether units captured Ba2+ and formed stable BCAm/Ba2+ host-guest complexes, the lower critical solution temperature (LCST) of the hydrogel increased due to the repulsion among charged BCAm/Ba2+ complex groups and osmotic pressure within the hydrogel. Whereas crown ethers captured Cs+, the LCST shifted to a lower temperature because of the formation of 2:1 sandwich complexes. Unexpectedly, the LCST of the cross-linked P(NIPAM-co-BCAm) hydrogel in K+ solution did not shift to a higher temperature, which was definitely different from the previously reported linear P(NIPAM-co-BCAm) copolymer in K+ solution. The results of this work provide valuable information for development of dual thermo- and ion-responsive hydrogels which have potential applications in drug controlled-release systems or biomedical fields.     

Preparation,morphology, and thermoresponsive properties of poly(N‐isopropylacrylamide)‐based copolymer microgels

In this research, thermoresponsive copolymer latex particles with an average diameter of about 200–500 nm were prepared via surfactant‐free emulsion polymerization. The thermoresponsive properties of these particles were designed by the addition of hydrophilic monomers [acrylic acid (AA) and sodium acrylate (SA)] to copolymerize with N‐isopropylacrylamide (NIPAAm). The effects of the comonomers and composition on the synthesis mechanism, kinetics, particle size, morphology, and thermoresponsive properties of the copolymer latex were also studied to determine the relationships between the synthesis conditions, the particle morphology, and the thermoresponsive properties. The results showed that the addition of hydrophilic AA or SA affected the mechanism and kinetics of polymerization. The lower critical solution temperature (LCST) of the latex copolymerized with AA rose to a higher temperature. However, because the strong hydrophilic and ionic properties of SA caused a core–shell structure, where NIPAAm was in the inner core and SA was in the outer shell, the LCST of the latex copolymerized with SA was still the same as that of pure poly(N‐isopropylacrylamide) latex. It was concluded that these submicrometer copolymer latex particles with different thermoresponsive properties could be applied in many fields. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 356–370, 2006     

Investigation of the swelling behavior of hydrogels derived from high-molecular-weight poly(2-ethyl-2-oxazoline)

Thermoresponsive hydrogels are of great importance as smart materials. They are usually composed of cross-linked polymers with a lower critical solution temperature (LCST). Although much is known about networks of poly(N-isopropylacrylamide), all other polymers are somewhat neglected. In this work, the temperature-dependent swelling behavior of differently cross-linked thermoresponsive poly(2-ethyl-2-oxazoline) (PEtOx) hydrogels were investigated with regard to varying parameters of the network composition. It was found that the degrees of swelling of the hydrogels converge for a certain polymer/solvent system at a distinct temperature independent of its degree of cross-linking. Furthermore, this temperature correlates with the LCST of the respective starting PEtOx. Its net chain molecular weight M_c only affects the maximum degree of swelling and thus, the swelling–deswelling rate of the hydrogel. The fundamental structure/property relations found in this study could be useful to predict the behavior of other thermoresponsive hydrogels.     

Thermogelation of amphiphilic poly(asparagine) derivatives

Thermoresponsive sol–gel transition polymers based on biodegradable poly(amino acid) were synthesized by the reaction of poly(succinimide) with dodecylamine and amino alcohols. The introduction of the hydrophobic amine into the thermoresponsive poly(amino acid)s induced the sol–gel transition in phosphate buffer saline. The effects of the side chain structure, molecular weight, concentration of the polymer, and the additives (inorganic salts and urea) in the solution on the thermoresponsive behaviors were systematically investigated. A relationship between the lowest critical solution temperature (LCST) in the dilute solution and the viscosity reduction of the concentrated solution upon heating was observed. The present poly(amino acid)s showing a thermoresponsive sol–gel transition in aqueous solutions possess immense potential as an injectable biodegradable hydrogel system for various biomedical applications. Copyright © 2009 John Wiley & Sons, Ltd.     

Controlled aggregation behavior of thermoresponsive polymeric micelles by introducing hydrophilic segments as corona components

Poly[N‐isopropylacrylamide‐co‐N‐(3‐methoxypropyl)acrylamide]‐b‐poly(D,L‐lactide) (P(IPAAm‐co‐MPAAm)‐b‐PLA) as a thermoresponsive block copolymer and PMPAAm‐b‐PLA as a nonthermoresponsive block copolymer were co‐assembled into thermoresponsive polymeric micelles in water. In addition, PMPAAm‐b‐P(IPAAm‐co‐MPAAm)‐b‐PLA triblock copolymer was assembled to form thermoresponsive micelles with a hydrophilic layer on the outermost surface of the thermoresponsive corona. Using both micelles, we investigated the effects of introducing hydrophilic polymer segments on micellar aggregation behavior at temperatures above the lower critical solution temperature (LCST) of the thermoresponsive micelles. Despite the external hydrophilic PMPAAm layer on PMPAAm‐b‐P(IPAAm‐co‐MPAAm)‐b‐PLA micelles, aggregation following dehydration of the thermoresponsive segments was not significantly suppressed at temperatures above the LCST due to the instability of the core‐corona state. In contrast, intermicellar aggregation was successfully controlled by blending P(IPAAm‐co‐MPAAm) and PMPAAm in the thermoresponsive corona region, even above the LCST. In particular, PMPAAm chains longer than the P(IPAAm‐co‐MPAAm) chains could regulate the hydrodynamic diameter of micellar aggregates at temperatures above the LCST. The micelles showed enhanced drug release rates in response to temperature changes above the LCST without precipitating from solution. These results indicated that a side‐by‐side structure of hydrophilic/thermoresponsive chains in the corona region could effectively control the micellar aggregation state after a thermal phase transition. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1695–1704     

Thermoresponsive poly(N-isopropyl acrylamide)-grafted polycaprolactone films with surface immobilization of collagen

Thermoresponsive poly(N-isopropylacrylamide) (P(NIPAAm))-grafted polycaprolactone (PCL) films with a suitable amount of immobilized cell-adhesive collagen were prepared to improve cell adhesion and proliferation above the lower critical solution temperature (LCST, 32°C) of P(NIPAAm) without destroying cell detachment properties at lower temperatures. Covalently tethered P(NIPAAm) brushes on PCL film surfaces were first prepared via surface-initiated atom transfer radical polymerization (ATRP). The alkyl bromide end groups of the grafted P(NIPAAm) brushes were used in nucleophilic substitution reactions for the direct coupling of collagen to produce the collagen-immobilized thermoresponsive PCL surface. At 37°C, the cell attachments on the collagen-immobilized thermoresponsive PCL surface were enhanced substantially. The attached cells could be recovered simply by lowering culture temperature. The P(NIPAAm)-grafted PCL films with immobilized collagen are potentially useful as adhesion modifiers for advanced cell culture and tissue engineering applications.     

Porous alginate-Ca hydrogels interpenetrated with PNIPAAm networks: Interrelationship between compressive stress and pore morphology

Thermo-sensitive porous hydrogels composed of interpenetrated networks (IPN) of alginate-Ca²⁺ and PNIPAAm have been obtained. The hydrogels were prepared by cross-linking alginate-Na⁺ with Ca²⁺ ions inside PNIPAAm networks. Compressive tests and scanning electron microscopy were used to evaluate gel strength and pore morphology, respectively. IPN hydrogels displayed two distinct pore morphologies under thermal stimuli. Below 30-35 °C, the LCST of PNIPAAm in water, IPN hydrogels were highly porous. The pore size of hydrogel heated above LCST became progressively smaller. Alginate-Ca²⁺ and PNIPAAm hydrogels, used as references, did not present such behaviour, indicating that the porous effect is due to IPN hydrogel. It was verified that higher strength is achieved when the hydrogel presents small pore size and the temperature is increased. It is suggested that at temperatures above LCST, the PNIPAAm chains shrink and pull the alginate-Ca²⁺ networks back. During shrinking, the polymer chains occupy the open spaces (pores from which water is expelled), and therefore, the hydrogel becomes less deformable when subjected to compressive stress. The results presented in this work indicate that the mechanical properties as well as the pore morphologies of these IPN hydrogels can be tailored by thermal stimulus.     

Effect of temperature cycling on the activity and productivity of immobilized β-galactosidase in a thermally reversible hydrogel bead reactor

The enzyme beta-galactosidase has been immobilized within thermally reversible hydrogel beads that exhibit LCST (lower critical solution temperature) behavior. The hydrogel beads containing the immobilized enzymes swell and expand below the LCST and deswell and shrink above the LCST. This behavior is reversible. The enzyme was physically entrapped in a crosslinked hydrogel of a copolymer of N-isopropylacrylamide (NIPAAm) and acrylamide (AAm), and formed as beads in an inverse suspension polymerization. The beads were placed in a packed bed column reactor which was operated in a continuous, single pass mode, either isothermally at 30 or 35 degrees C, or with temperature cycling between 30 and 35 degrees C. The thermal cycling significantly enhanced overall reactor enzyme activity relative to isothermal operation at either the higher or lower temperature. It is postulated that mass transfer rates within the hydrogel beads are greatly enhanced by the movement of water in and out of the beads during the expansion or collapse of the polymer chain network as temperature is cycled.     

A new solvent polymeric membrane electrode incorporating poly(N-isopropylacrylamide) as a polymer

Here, we report on a new solvent polymeric membrane electrode incorporating thermoresponsive poly(N-isopropylacrylamide) (PIPA) as a polymer with the lower critical solution temperature (LCST) of ca. 32 °C. The response of the solvent polymeric membrane electrode to the ions changes at 25 and 40 °C. Pulsed NMR analyses demonstrated the novel effects of the LCST behaviour on the potentiometric polymeric membrane.     

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] thermoresponsive microspheres: An accurate method based on solute exclusion technique to determine the volume phase transition temperature

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] [poly(NIPAAm-co-AAm-co-HEMA)] copolymer was synthesized as a new thermoresponsive material possessing a lower critical solution temperature (LCST) around 37 °C in phosphate buffer, pH 7.4, at a solution concentration of 1%, w/v. The influence of polymer concentration on LCST was determined by cloud point measurements and by microcalorimetric analysis. The copolymer was transformed in hydrogel microspheres by suspension reticulation of OH groups with glutaraldehyde. The volume phase transition temperature (VPTT) of microspheres was determined by a new approach, which involves measurement of the increase in concentration of a blue dextran (BD) solution at different temperatures in the presence of dry microspheres. The minimum BD concentration that gives reliable and reproducible results was determined to be 1 mg/ml. However, the higher is the concentration of BD in solution the smaller is the error. Contrary to solution of the linear polymer which displays a sharp phase transition temperature, the dependence of water regain of the hydrogel with temperature lasts from 4 °C to 50 °C.     

The Research on Intelligent Controlled DDS of Polymer Carrier

The intelligent controlled drug delivery systems (DDS) are a series of the preparations including microcapsules or nanocapsules composed of intelligent polymers and medication. The properties of preparations can change with the external stimuli, such as pH value, temperature,chemical substance, light, electricity and magnetism etc. According to this properties, the DDS can be intelligently controlled. This paper has reviemed research on syntheses and applications of intelligent controlled DDS of polymer carriers.Drug delivery system with pH stimuliThe volume of polymer hydrogel can change with the pH value of external environment. The sensitive polymer hydrogels to pH are often as carriers. The polymer hydrogel carrying medicine is especially suitable for taking orally. In order to protect medicine from losing activation, we enwrapped medicine into polymer hydrogel with acidic group. In the acidic environment of stomach,the volume of polymer hydrogel contracts because of the hydrogen bond. The medicine in the polymer hydrogel cannot disperse out. When it goes to the intestine of basic environment, the hydrogen bond will be broken, and the medicine can release.Drug delivery system with temperatureTemperature sensitive polymer hydrogel can change its volume with changing of environmental temperature. This kind of polymer hydrogel can be also used as a carrier of medicine. At a low temperature, the polymer chains form hydrogen bond with water to swell to let medicine disperse out from the hydrogel. On the other hand, the hydrogen bond will be broken and polymer chain will lose water to contract with temperature's increasing. And the medicine will not disperse out. For example,the poly(N-isopropylacrylamide)(PNIPAAm) is the hydrogel that is swelled at lower temperature and contracted at higher temperature. PNIPAAm has the lower critical solution temperature(LCST).We can adjust its LCST to control PNIPAAm hydrogel's swelling or contraction to let medicine release or not.Drug delivery system with other stimuliThe polymer carrier drug delivery system can be intelligently controlled with the stimuli of pH value and temperature. In addition, there are still some other stimuli for DDS. For example, DDS with light; DDS with electricity(or electric field); DDS with magnetism(magnetic field); DDS with chemical substance; etc. The characteristic of intelligent polymer carrier is based on P.J.Flory's gel-swelling theory. Intelligent polymer carrier DDS will be widely used in biological and medical fields.