Thermal decomposition and non-isothermal decomposition kinetics of carbamazepine

The thermal stability and kinetics of isothermal decomposition of carbamazepine were studied under isothermal conditions by thermogravimetry (TGA) and differential scanning calorimetry (DSC) at three heating rates. Particularly, transformation of crystal forms occurs at 153.75°C. The activation energy of this thermal decomposition process was calculated from the analysis of TG curves by Flynn-Wall-Ozawa, Doyle, distributed activation energy model, ?atava-?esták and Kissinger methods. There were two different stages of thermal decomposition process. For the first stage, E and logA [s^?1] were determined to be 42.51 kJ mol^?1 and 3.45, respectively. In the second stage, E and logA [s^?1] were 47.75 kJ mol^?1 and 3.80. The mechanism of thermal decomposition was Avrami-Erofeev (the reaction order, n = 1/3), with integral form G(α) = [?ln(1 ? α)]^1/3 (α = ～0.1–0.8) in the first stage and Avrami-Erofeev (the reaction order, n = 1) with integral form G(α) = ?ln(1 ? α) (α = ～0.9–0.99) in the second stage. Moreover, ΔH ^≠, ΔS ^≠, ΔG ^≠ values were 37.84 kJ mol^?1, ?192.41 J mol^?1 K^?1, 146.32 kJ mol^?1 and 42.68 kJ mol^?1, ?186.41 J mol^?1 K^?1, 156.26 kJ mol^?1 for the first and second stage, respectively.     

Kinetics of non-isothermal decomposition of cinnamic acid

The thermal stability and kinetics of decomposition of cinnamic acid were investigated by thermogravimetry and differential scanning calorimetry at four heating rates. The activation energies of this process were calculated from analysis of TG curves by methods of Flynn-Wall-Ozawa, Doyle, Distributed Activation Energy Model, ?atava-?esták and Kissinger, respectively. There are only one stage of thermal decomposition process in TG and two endothermic peaks in DSC. For this decomposition process of cinnamic acid, E and logA[s^?1] were determined to be 81.74 kJ mol^?1 and 8.67, respectively. The mechanism was Mampel Power law (the reaction order, n = 1), with integral form G(α) = α (α = 0.1–0.9). Moreover, thermodynamic properties of ΔH ^≠, ΔS ^≠, ΔG ^≠ were 77.96 kJ mol^?1, ?90.71 J mol^?1 K^?1, 119.41 kJ mol^?1.     

Non-isothermal decomposition kinetics of diosgenin

The thermal stability and kinetics of isothermal decomposition of diosgenin were studied by thermogravimetry (TG) and Differential Scanning Calorimeter (DSC). The activation energy of the thermal decomposition process was determined from the analysis of TG curves by the methods of Flynn-Wall-Ozawa, Doyle, ?atava-?esták and Kissinger, respectively. The mechanism of thermal decomposition was determined to be Avrami-Erofeev equation (n = 1/3, n is the reaction order) with integral form G(α) = [?ln(1 ? α)]^1/3 (α = 0.10–0.80). E _a and logA [s^?1] were determined to be 44.10 kJ mol^?1 and 3.12, respectively. Moreover, the thermodynamics properties of ΔH ^≠, ΔS ^≠, and ΔG ^≠ of this reaction were 38.18 kJ mol^?1, ?199.76 J mol^?1 K^?1, and 164.36 kJ mol^?1 in the stage of thermal decomposition.     

Steric and electronic contributions to barriers of internal rotation in 1,8-dibenzoylnaphthalenes

Restricted rotation about the naphthalenylcarbonyl bonds in the title compounds resulted in mixtures of cis and trans rotamers, the equilibrium and the rotational barriers depending on the substituents. For 2,7-dimethyl-1,8-di-(p-toluoyl)-naphthalene (1) ΔH° = 3.66 ± 0.14 kJ mol^?1, ΔS° = 1.67 ± 0.63 J mol^?1 K^?1, ΔH^≠_ct = 55.5 ± 1.3 kJ mol^?1, ΔH^≠_ct = 51.9 ± 1.3 kJ mol^?1, ΔS^≠_ct = ?41.3±4.1 J mol^?1 K^?1 and ΔS^≠_ct = ?42.9±4.1 J mol^?1 K^?1. The rotation about the phenylcarbonyl bond requires ΔH^≠ = ?56.9±4.4 kJ mol^?1 and ΔS^≠ = ?20.5±15.3 J mol^?1 K^?1 for the cis rotamer, and ΔH^≠ = 43.5Δ0.4 kJ mol^?1 and ΔS^≠ =± ?22.4Δ1.3 J mol^?1 K^?1 for the trans rotamer. The role of electronic factors is likely to be virtually the same for both these rotamers but steric interaction between the two phenyl rings occurs in the cis rotamer only. Hence, the difference of the activation enthalpies obtained for the cis and trans rotamers, ΔΔH^?1 = 13.4 kJ mol^?1, provides a basis for the estimation of the role of steric factors in this rotation. For the tetracarboxylic acid 2 and its tetramethyl ester 3 the equilibrium is even more shifted towards the trans form because of enhanced steric and electrostatic interactions between the substituents in the cis form. The barriers for the rotation around the phenylcarbonyl bond and the cis-trans isomerization are lowered; an explanation for this result is presented.     

Conformational Polymorphism in N‐(4′‐methoxyphenyl)‐ 3‐bromothiobenzamide

Three conformational polymorphs of N‐(4′‐methoxyphenyl)‐3‐bromothiobenzamide, yellow α, orange β, and yellow γ, have been identified by single‐crystal X‐ray diffraction. The properties and structure of the polymorphs were examined with FT Raman, FTIR (ATR), and UV/Vis spectroscopy, as well as differential scanning calorimetry. Computational data on rotational barriers in the isolated gas‐phase molecule indicate that the molecular conformation found in the α form is energetically preferred, but only by around 2 kJ mol^?1 over the γ conformation. The planar molecular structure found in the β form is destabilized by 10–14 kJ mol^?1, depending on the calculation method. However, experimental evidence suggests that the β polymorph is the most stable crystalline phase at room temperature. This is attributed to the relative planarity of this structure, which allows more and stronger intermolecular interactions, that is, more energetically effective packing. Calculated electronic‐absorption maxima were in agreement with experimental spectra.     

Thermochemical Properties and Non-isothermal Decomposition Reaction Kinetics of N-Guanylurea Dinitramide （GUDN）

Introduction N-Guanylurea dinitramide (GUDN) is a new ener-getic oxidizer with higher energy and lower sensitivity. Its crystal density is 1.755 g·cm-3. The detonation velocity is about 8210 m·s-1. Its specific impulse and pressure exponent are 213.1 s and 0.73, respectively. It has the potential for possible use as an energy ingredient of propellants and explosives from the point of view of the above-mentioned high performance. Its preparation,1 properties2 and hygroscopocity2 have been …     

MP2, DFT‐D,and PCM study of the HMB–TCNE complex: Thermodynamics,electric properties,and solvent effects

Geometry, thermodynamic, and electric properties of the π‐EDA complex between hexamethylbenzene (HMB) and tetracyanoethylene (TCNE) are investigated at the MP2/6‐31G* and, partly, DFT‐D/6‐31G* levels. Solvent effects on the properties are evaluated using the PCM model. Fully optimized HMB–TCNE geometry in gas phase is a stacking complex with an interplanar distance 2.87 × 10^?10 m and the corresponding BSSE corrected interaction energy is ?51.3 kJ mol^?1. As expected, the interplanar distance is much shorter in comparison with HF and DFT results. However the crystal structures of both (HMB)₂–TCNE and HMB–TCNE complexes have interplanar distances somewhat larger (3.18 and 3.28 × 10^?10 m, respectively) than our MP2 gas phase value. Our estimate of the distance in CCl₄ on the basis of PCM solvent effect study is also larger (3.06–3.16 × 10^?10 m). The calculated enthalpy, entropy, Gibbs energy, and equilibrium constant of HMB–TCNE complex formation in gas phase are: ΔH⁰ = ?61.59 kJ mol^?1, ΔS = ?143 J mol^?1 K^?1, ΔG⁰ = ?18.97 kJ mol^?1, and K = 2,100 dm³ mol^?1. Experimental data, however, measured in CCl₄ are significantly lower: ΔH⁰ = ?34 kJ mol^?1, ΔS = ?70.4 J mol^?1 K^?1, ΔG⁰ = ?13.01 kJ mol^?1, and K = 190 dm³ mol^?1. The differences are caused by solvation effects which stabilize more the isolated components than the complex. The total solvent destabilization of Gibbs energy of the complex relatively to that of components is equal to 5.9 kJ mol^?1 which is very close to our PCM value 6.5 kJ mol^?1. MP2/6‐31G* dipole moment and polarizabilities are in reasonable agreement with experiment (3.56 D versus 2.8 D for dipole moment). The difference here is due to solvent effect which enlarges interplanar distance and thus decreases dipole moment value. The MP2/6‐31G* study supplemented by DFT‐D parameterization for enthalpy calculation, and by the PCM approach to include solvent effect seems to be proper tools to elucidate the properties of π‐EDA complexes. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as      

抗肿瘤药物5-氟尿嘧啶与人血清白蛋白相互作用的热力学研究

在298.15 K下,根据本结合过程的假设和Langmuir结合理论, 用等温滴定微量热和圆二色谱分析法研究了抗肿瘤药物5-氟尿嘧啶(5-FU)与人血清白蛋白(HSA)的相互作用. 研究结果表明, 蛋白质(HSA)与药物配体5-氟尿嘧啶的相互作用存在两类结合位点. 第一类结合, 结合位点数N＝71±0.1, 结合常数 K＝(1.46±0.016)×10⁵ L•mol^－1, 结合焓ΔH＝(39.61±0.220) kJ•mol^－1, 结合熵ΔS＝(231.68±0.025) J•mol^－1•K^－1, 结合自由能ΔG＝(－29.48±0.030) kJ•mol^－1. 结合过程为熵驱动过程, 疏水相互作用是过程的主要推动力;第二类结合, 结合位点数N＝140±0.2, 结合常数 K＝(1.49±0.032)×10⁵ L•mol^－1, 结合焓ΔH＝(－19.31±0.103) kJ•mol^－1, 结合熵ΔS＝(34.30±0.055) J•mol^－1•K^－1, 结合自由能ΔG＝(－29.53±0.041) kJ•mol^－1, 结合过程为焓-熵协同驱动过程, 氢键和静电相互作用是过程的主要推动力. 圆二色谱分析结果表明, 在两类结合过程中, 药物5-氟尿嘧啶(5-FU)的作用致使蛋白质(HSA)二级结构单元的相对含量发生了变化.     

Alginate polyelectrolyte ionotropic gels. XVIII. Oxidation of alginate polysaccharide by potassium permanganate in alkaline solutions: Kinetics of decomposition of intermediate complex

The kinetics of decomposition of [Alg · Mn ^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at a constant ionic strength of 0.5 mol dm^?3. The decomposition reaction was found to be first-order in the intermediate concentration. The results showed that the rate of reaction was base-catalyzed. The kinetic parameters have been evaluated and found to be ΔS^? = ?103.88±6.18 J mol^?1 K^?1, ΔH^? = 51.61 ± 1.02 kJ mol^?1, and ΔG^? = 82.57 ± 2.86 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 1993 John Wiley & Sons, Inc.     

Sequential segregation of Sn and Sb in a Cu(111) single crystal

The sequential segregation of Sn and Sb to the surface of a Cu(111) single crystal was measured in the temperature range 400–1100 K by Auger electron spectroscopy. It was found that Sn with the higher diffusion coefficient first segregates to the surface and then is replaced by the slower‐segregating Sb. The results were fitted by a ternary segregation model yielding segregation energies (ΔG_Sn = 76.3 kJ mol^?1, ΔG_Sb = 95.9 kJ mol^?1), interaction parameters (Ω_SnCu = 3.8 kJ mol^?1, Ω_SbCu = 16.2 kJ mol^?1, Ω_SnSb = ?5.3 kJ mol^?1) and diffusion coefficients (D_0(Sn) = 1.8 × 10^?5 m² s^?1, E_Sn = 173 kJ mol^?1, D_0(Sb) = 6.0 × 10^?5 m² s^?1, E_Sb = 205 kJ mol^?1) for both species. The validity of the interaction coefficients and segregation energies was verified using the Guttman equations for equilibrium segregation in ternary systems. Copyright © 2003 John Wiley & Sons, Ltd.     

Sigmatropic [1,3]-boron shift (permanent allylic rearrangement) in 3-allyl-3-borabicyclo[3.3.1]nonanes

2D ¹H-¹H EXSY NMR spectroscopy show that the free energy of activation ΔG ^≠ in six 3-allyl-3-borabicyclo[3.3.1]nonane derivatives is significantly higher (72–86 kJ mol^?1) than that in typical allylboranes (48–66 kJ mol^?1). For the first member of the series, viz., 3-allyl-3-borabicyclo[3.3.1]nonane, the activation parameters of the permanent allylic rearrangement were also determined (ΔH ^≠ = 82.7±3.4 kJ mol^?1, ΔS ^≠ = ?11.8±10.3 J mol^?1 K^?1, E _A = 85.5±3.4 kJ mol^?1, lnA = 29.2±1.2).     

Application of halo polyhydroxy polyurethane foam for the extraction of cobalt from cobalamin drugs and urine

Polyhydroxy polyurethane sorbent was modified by the addition of halogen atoms to its matrix to produce a new sorbent distinguished by high surface polarity, enhanced capacity, and improved stability in both acidic and alkaline media. Halo polyhydroxy polyurethane foam (X-PPF) was characterized by NMR, FTIR, UV–Vis, Raman spectroscopy, pH_ZCP values, and scanning electron microscopy images. Experimental studies have proven that X-PPFs have a great potential for the extraction and recovery of cobalt ions and this was attributed to the presence of halogen, phenolic, and urethane groups. The pH_ZCP value of X-PPFs was determined to be 0.91 and the maximum metal recovery was achieved at a pH range of 6–7. The kinetics of the process was best described by pseudo-second-order model (R²?=?1). ΔH, ΔS, and ΔG values were calculated to be ?57.2?kJ?mol^?1, ?172.6?J?K^?1?mol^?1, and ?5.8?kJ?mol^?1, respectively. A perfect isotherm curve with zero intercept (0.002), good correlation (R²?=?0.999), and capacity of 246.8?mg?g^?1 was obtained.     

Kinetische untersuchung der reversiblen dimerisierung von o-phenylendioxidimethylsilan

The reversible dimerisation of o-phenylenedioxydimethylsilane (2,2-dimethyl-1,3,2-benzodioxasilole) has been studied by ¹H NMR spectroscopy. The kinetics of this reaction can be described quantitatively by a bimolecular 10-ring formulation reaction and a monomolecular backreaction. The thermodynamic and kinetic parameters are: ΔH⁰ = ?43 kJ mol^?1; ΔS⁰ = ?112 J mol^?1 K^?1; ΔG⁰₂₉₈ = ?9.6 kJ mol^?1; ΔH³₂₉₈ = 57 kJ mol^?1; ΔS³₂₉₈ = ?129 J mol^?1 K^?1; ΔG³₂₉₈ = 96 kJ mol^?1; E_a = 60 kJ mol^?1; A = 3.17 × 10⁶ l mol^?1 s^?1. Remarkable is the low activation energy of formation of the ten-membered ring, considering that two SiO bonds have to be cleaved during the reaction. Transition states and possible structures of the ten-membered heterocycle are discussed.     

Kinetics and mechanism of decomposition of intermediate complex during oxidation of pectate polysaccharide by potassium permanganate in alkaline solutions

The kinetics of decomposition of an [Pect·Mn^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at various temperatures of 15–30°C and a constant ionic strength of 0.1 mol dm^?3. The decomposition reaction was found to be first‐order in the intermediate concentration. The results showed that the rate of reaction was base‐catalyzed. The kinetic parameters have been evaluated and found to be ΔS^≠ = ? 190.06 ± 9.84 J mol^?1 K^?1, ΔH^≠ = 19.75 ± 0.57 kJ mol^?1, and ΔG^≠ = 76.39 ± 3.50 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 67–72, 2003     

Surface segregation measurements of In and S impurities from a dilute Cu(In,S) ternary alloy

The surface segregation of In and S from a dilute Cu(In,S) ternary alloy were measured using Auger electron spectroscopy coupled with a linear programmed heater. The alloy was linearly heated and cooled at constant rates. Segregation data of a linear heat run showed surface segregation of In that reached a maximum surface coverage of 25% followed by S, which reached a coverage of 30%. It was found that after In had reached a maximum surface coverage, it started to desegregate as soon as the S enriched the surface until In was completely replaced by S. The segregation parameters, namely, the pre‐exponential factor (D₀), activation energy (Q), segregation energy (ΔG?) and interaction energy (Ω) were extracted from the measured segregation data for both In and S segregation in Cu by simulating the measured segregation data with a theoretical segregation model (modified Darken model). The segregation parameters obtained for In segregation in Cu are D₀ = 1.8 ± 0.5 × 10^?5 m² s^?1, Q = 184.3 ± 1.0 kJ.mol^?1, ΔG? = ?61.4 ± 1.4 kJ.mol^‐1, Ω_Cu?In = 3.0 ± 0.4 kJ.mol^?1; for S segregation in Cu the parameters are D₀ = 8.9 ± 0.5 × 10^?3 m² s^?1, Q = 212.8 ± 3.0 kJ.mol^?1, ΔG? = ?120.0 ± 3.5 kJ.mol^?1, Ω_Cu?S = 23.0 ± 2.0 kJ mol^?1 and the In and S interaction parameter is Ω_In?S = ?4.0 ± 0.5 kJ.mol^?1. The initial parameters used for the Darken calculations were extracted from fits performed with the Fick's and Guttmann model. Copyright © 2013 John Wiley & Sons, Ltd.     

Transitions among five polymorphs of chlorpropamide near the melting point

Five polymorphs of chlorpropamide (α, β, δ, γ, and ε) were investigated near the melting point by using DSC. Structure of samples was tested by X-ray powder diffraction. Four first polymorphs were found to transform into ε-polymorph, which melts at T _m=128°C, Δ_m H=24 kJ mol⁻¹. Enthalpy of the polymorph transitions ranges from +3 kJ mol⁻¹ for α→ε to −0.8 kJ mol⁻¹ for β→ε. Structure of three first polymorphs was published elsewhere, and the structure of δ-polymorph is published for the first time. XRPD patterns for all polymorphs are reported, together with the atomic coordinates for the δ-polymorph.     

Ligand Dynamics in the Solid: Lithium‐fluorenide and Lithium‐benzo[b]fluorenide N,N,N′,N′‐Tetramethylethylenediamine (tmeda) Complexes

The dynamic behavior of the N,N,N′,N′‐tetramethylethylenediamine (tmeda) ligand has been studied in solid lithium‐fluorenide(tmeda) ( 3 ) and lithium‐benzo[b]fluorenide(tmeda) ( 4 ) using CP/MAS solid‐state ¹³C‐ and ¹⁵N‐NMR spectroscopy. It is shown that, in the ground state, the tmeda ligand is oriented parallel to the long molecular axis of the fluorenide and benzo[b]fluorenide systems. At low temperature (<250 K), the ¹³C‐NMR spectrum exhibits two MeN signals. A dynamic process, assigned to a 180° rotation of the five‐membered metallacycle (π‐flip), leads at elevated temperatures to coalescence of these signals. Line‐shape calculations yield ΔH^?=42.7 kJ mol^?1, ΔS^?=?5.3 J mol^?1 K^?1, and =44.3 kJ mol^?1 for 3 , and ΔH^?=36.8 kJ mol^?1, ΔS^?=?17.7 J mol^?1 K^?1, and =42.1 kJ mol^?1 for 4 , respectively. A second dynamic process, assigned to ring inversion of the tmeda ligand, was detected from the temperature dependence of T_1ρ, the ¹³C spin‐lattice relaxation time in the rotating frame, and led to ΔH^?=24.8 kJ mol^?1, ΔS^?=?49.2 J mol^?1 K^?1, and =39.5 kJ mol^?1 for 3 , and ΔH^?=18.2 kJ mol^?1, ΔS^?=?65.3 J mol^?1 K^?1, and =37.7 kJ mol^?1 for 4 , respectively. For (D₁₂)‐ 3 , the rotation of the CD₃ groups has also been studied, and a barrier E_a of 14.1 kJ mol^?1 was found.     

Conformational Analysis. XIX properties and reactions of 1,3-oxathianes VIII A 1H NMR conformational study of methyl-substituted derivatives

The addition of thioacetic acid to unsaturated alcohols or acids was utilized to obtain mercaptoalkanols which were condensed with suitable carybonyl compounds to prepare 24 methyl-substituted 1,3-oxathianes. The ¹H NMR spectra of the 1,3-oxathiane products were recorded at 60, 100 and/or 300 MHz and fully analysed. The results are best explained by a chair form which is completely staggered in the C-4? C-5? C-6 moiety ψ₄₅ or (ψ₅₆=60±1°). 1,3-Oxathianes having syn-axial 2,4- (and/or 2,6-) methyl-methyl interactions exist appreciably, if not exclusively, in twist forms. The vicinal coupling constants lead to the conformational free energies of axial methyl groups at C-4, ΔG°=7.4±0.4 kJ mol^?1, and at C-5, ΔG°=3.7±0.3 kJ mol^?1, in good agreement with previous estimates. They also show that both r-4,cis-5,trans-6- and r-4,trans-5,trans-6- trimethyl-1,3-oxathianes greatly favour the chiar form where the methyl group at C-4 is axial. The chair-twist energy parameters are reestimated at ΔH°_CT 27.0 kJ mol^?1, ΔS°_CT 11.6J mol^?1K^?1, and ΔG°_CT(298) 23.5 kJ mol^?1 for a 2,5-twist form.