Synthetic entry into polynuclear bismuth-manganese chemistry: high oxidation state Bi(III)2Mn(IV)6 and Bi(III)Mn(III)10 complexes

The first high nuclearity, mixed-metal Bi(III)/Mn(IV) and Bi(III)/Mn(III) complexes are reported. The former complexes are [Bi(2)Mn(IV)(6)O(9)(O(2)CEt)(9)(HO(2)CEt)(NO(3))(3)] (1) and [Bi(2)Mn(IV)(6)O(9)(O(2)CPh)(9)(HO(2)CPh)(NO(3))(3)] (2) and were obtained from the comproportionation reaction between Mn(O(2)CR)(2) and MnO(4)(-) in a 10:3 ratio in the presence of Bi(NO(3))(3) (3 equiv) in either a H(2)O/EtCO(2)H (1) or MeCN/PhCO(2)H (2) solvent medium. The same reaction that gives 2, but with Bi(O(2)CMe)(3) and MeNO(2) in place of Bi(NO(3))(3) and MeCN, gave the lower oxidation state product [BiMn(III)(10)O(8)(O(2)CPh)(17)(HO(2)CPh)(H(2)O)] (3). Complexes 1 and 2 are near-isostructural and possess an unusual and high symmetry core topology consisting of a Mn(IV)(6) wheel with two central Bi(III) atoms capping the wheel on each side. In contrast, the [BiMn(III)(10)O(8)](17+) core of 3 is low symmetry, comprising a [BiMn(3)(μ(3)-O)(2)](8+) butterfly unit, four [BiMn(3)(μ(4)-O)](10+) tetrahedra, and two [BiMn(2)(μ(3)-O)](7+) triangles all fused together by sharing common Mn and Bi vertices. Variable-temperature, solid-state dc and ac magnetization data on 1-3 in the 1.8-300 K range revealed that 1 and 2 possess an S = 0 ground state spin, whereas 3 possesses an S = 2 ground state. The work offers the possibility of access to molecular analogs of the multifunctional Bi/Mn/O solids that are of such great interest in materials science.     

Unexpected reactivity and coordination in gallium(III) and indium(III) chloride complexes with geometrically constrained thio- and selenoether ligands

Reaction of GaCl(3) with 1 mol equiv of [14]aneS(4) in anhydrous CH(2)Cl(2) gives the exocyclic chain polymer [GaCl(3)([14]aneS(4))] (1) whose structure confirms trigonal bipyramidal coordination at Ga with a planar GaCl(3) unit. In contrast, using [16]aneS(4) and GaCl(3) or [16]aneSe(4) and MCl(3) (M = Ga or In) in either a 1:1 or a 1:2 molar ratio produces the anion-cation complexes [GaCl(2)([16]aneS(4))][GaCl(4)] (2) and [MCl(2)([16]aneSe(4))][MCl(4)] (M = Ga, 3 and M = In, 4) containing trans-octahedral cations with endocyclic macrocycle coordination. The ligand-bridged dimer [(GaCl(3))(2){o-C(6)H(4)(SMe)(2)}] (5) is formed from a 2:1 mol ratio of the constituents and contains distorted tetrahedral Ga(III). This complex is unusually reactive toward CH(2)Cl(2), which is activated toward nucleophilic attack by polarization with GaCl(3), producing the bis-sulfonium species [o-C(6)H(4)(SMeCH(2)Cl)(2)][GaCl(4)](2) (6), confirmed from a crystal structure. In contrast, the xylyl-based dithioether gives the stable [(GaCl(3))(2){o-C(6)H(4)(CH(2)SEt)(2)}] (8). However, replacing GaCl(3) with InCl(3) with o-C(6)H(4)(CH(2)SEt)(2) preferentially forms the 4:3 In:L complex [(InCl(3))(4){o-C(6)H(4)(CH(2)SEt)(2)}(3)] (9) containing discrete tetranuclear moieties in which the central In atom is octahedrally coordinated to six bridging Cl's, while the three In atoms on the edges have two bridging Cl's, two terminal Cl's, and two mutually trans S-donor atoms from different dithioether ligands. GaCl(3) also reacts with the cyclic bidentate [8]aneSe(2) to form a colorless, extremely air-sensitive adduct formulated as [(GaCl(3))(2)([8]aneSe(2))] (10), while InCl(3) gives [InCl(3)([8]aneSe(2))] (14). Very surprisingly, 10 reacts rapidly with O(2) gas to give initially the red [{[8]aneSe(2)}(2)][GaCl(4)](2) (11) and subsequently the yellow [{[8]aneSe(2)}Cl][GaCl(4)] (12). The crystal structure of the former confirms a dimeric [{[8]aneSe(2)}(2)](2+) dication, derived from coupling of two mono-oxidized {[8]aneE(2)}(+?) cation radicals to form an Se-Se bond linking the rings and weaker transannular 1,5-Se···Se interactions across both rings. The latter (yellow) product corresponds to discrete doubly oxidized {[8]aneSe(2)}(2+) cations (with a primary Se-Se bond across the 1,5-positions of the ring) with a Cl(-) bonded to one Se. Tetrahedral [GaCl(4)](-) anions provide charge balance in each case. These oxidation reactions are clearly promoted by the Ga(III) since [8]aneSe(2) itself does not oxidize in air. The new complexes have been characterized in the solid state by IR and Raman spectroscopy, microanalysis, and X-ray crystallography where possible. Where solubility permits, the solution characteristics have been probed by (1)H, (77)Se{(1)H}, and (71)Ga NMR spectroscopic studies.     

Bi3GaS5]2[Ga3Cl10]2[GaCl4]2·S8 containing heterocubane-type [Bi3GaS5]2+, star-shaped [Ga3Cl10]-, monomeric [GaCl4]- and crown-like S8

By reaction of elemental bismuth, sulfur, bismuth(III) chloride and gallium(III) chloride in the ionic liquid (BMIm)Cl (BMIm: 1-butyl-3-methylimidazolium), [Bi(3)GaS(5)](2)[Ga(3)Cl(10)](2)[GaCl(4)](2)·S(8) is obtained as red transparent crystals. According to X-ray structure analysis based on single crystals, the title compound crystallizes with triclinic lattice symmetry and is composed of heterocubane-type [Bi(3)GaS(5)](2+) cations, trimeric star-shaped [Ga(3)Cl(10)](-) anions with three (GaCl(4)) tetrahedra sharing a single central chlorine atom, monomeric [GaCl(4)](-) tetrahedra and neutral, crown-shaped S(8)-rings. Here, the heterocubane [Bi(3)GaS(5)](2+) as well as the star-shaped [Ga(3)Cl(10)](-) are observed as building units for the first time. [Bi(3)GaS(5)](2)[Ga(3)Cl(10)](2)[GaCl(4)](2)·S(8) is further characterized by X-ray powder diffraction as well as by thermogravimetry/differential thermal analysis.     

Structural and Quantum Chemical Study of Bi(5)(3+) and Isoelectronic Main-Group Metal Clusters. The Crystal Structure of Pentabismuth(3+) Tetrachlorogallate(III) Refined from X-ray Powder Diffraction Data and Synthetic Attempts on Its Antimony Analogue

Pentabismuth(3+) tetrachlorogallate(III), (Bi(5)(3+))(GaCl(4)(-))(3), has been synthesized by reducing a BiCl(3)-GaCl(3) melt with bismuth metal and the crystal structure refined from X-ray (Cu Kalpha(1)) powder diffraction data. The structure was found to belong to space group R-3c, with the lattice parameters a = 11.871(2) ? and c = 30.101(3) ? (Z = 6). It is isostructural with the previously characterized Bi(5)(AlCl(4))(3). An attempt to synthesise the antimony analogue Sb(5)(GaCl(4))(3) by reducing a SbCl(3)-GaCl(3) mixture with gallium metal produced a black solid phase. The gallium content of this phase is consistent with the stoichiometry Sb(5)(GaCl(4))(3), and the Raman spectrum of the phase dissolved in SbCl(3)-GaCl(3) comprises strong, low-frequency bands attributable to Sb-Sb stretch vibrations in Sb(5)(3+) or another reduced antimony species. Quantum chemical analyses have been performed for the isoelectronic, trigonal pyramidal closo-clusters Sn(5)(2-), Sb(5)(3+), Tl(5)(7-), Pb(5)(2-), and Bi(5)(3+), both with extended Hückel (eH) and Hartree-Fock (HF) methods. The HF calculations were performed with and without corrections for the local electron-electron correlation using second-order M?ller-Plesset perturbation theory (MP2). All theoretical results are compared and evaluted with respect to experimental cluster structures and vibrational frequencies. The results from the calculations agree well with available experimental data for the solid-state structures and vibrational spectra of these cluster ions, except for the Tl(5)(7-) ion. Isolated Tl(5)(7-) is suggested to be electronically unstable because of the high charge density. The Sb(5)(3+) cluster ion is indicated to be stable. According to the calculations, Sn(5)(2-) and Pb(5)(2-) may be described in terms of edge-localized bonds without substantial electron density between the equatorial atoms, whereas Sb(5)(3+) and Bi(5)(3+) have electron density evenly distributed over all M-M vectors. Furthermore, the theoretical results give no support for a D(3h) --> C(4v) fluxionality of these clusters.     

Nickel(II) and iron(II) triple helicates assembled from expanded quaterpyridines incorporating flexible linkages

In the present study the interaction of Fe(II) and Ni(II) with the related expanded quaterpyridines, 1,2-, 1,3- and 1,4-bis-(5'-methyl-[2,2']bipyridinyl-5-ylmethoxy)benzene ligands (4-6 respectively), incorporating flexible, bis-aryl/methylene ether linkages in the bridges between the dipyridyl domains, was shown to predominantly result in the assembly of [M(2)L(3)](4+) complexes; although with 4 and 6 there was also evidence for the (minor) formation of the corresponding [M(4)L(6)](8+) species. Overall, this result contrasts with the behaviour of the essentially rigid 'parent' quaterpyridine 1 for which only tetrahedral [M(4)L(6)](8+) cage species were observed when reacted with various Fe(II) salts. It also contrasts with that observed for 2 and 3 incorporating essentially rigid substituted phenylene and biphenylene bridges between the dipyridyl domains where reaction with Fe(II) and Ni(II) yielded both [M(2)L(3)](4+) and [M(4)L(6)](8+) complex types, but in this case it was the latter species that was assigned as the thermodynamically favoured product type. The X-ray structures of the triple helicate complexes [H(2)O?Ni(2)(4)(3)](PF(6))(4)·THF·2.2H(2)O, [Ni(2)(6)(3)](PF(6))(4)·1.95MeCN·1.2THF·1.8H(2)O, and the very unusual triple helicate PF(6)(-) inclusion complex, [(PF(6))?Ni(2)(5)(3)](PF(6))(3)·1.75MeCN·5.25THF·0.25H(2)O are reported.     

Stabilising pentavalent actinides--visible-near infrared and X-ray absorption spectroscopic studies of the utility of the [(Np3W4O15)(H2O)3(MW9O33)3]18- (M = Sb, Bi) structural type

We report the interaction between B-type tri-lacunary heteropolyoxotungstate anions and actinyl(V) cations in aqueous solution, yielding a greater understanding of the stability of the O≡An≡O(1+) linear dioxo actinide moiety. Previously we reported that B-α-[BiW(9)O(33)](9-) and B-α-[SbW(9)O(33)](9-) will react with NpO(2)(1+) to yield [(Np(3)W(4)O(15))(H(2)O)(3)(MW(9)O(33))(3)](18-) (M = Bi, or Sb). Single crystal structural characterisation of salts of these complexes revealed a core in which three Np(V) atoms interact with a central W(VI) atom through bridging oxo groups. These bridging oxygen atoms come from one of the two axial oxygens in O≡Np≡O(1+) and represent a highly unusual interaction for a discrete molecular species. In this study visible/near infra-red spectroscopy indicates that [(Np(3)W(4)O(15))(H(2)O)(3)(BiW(9)O(33))(3)](18-) could be readily stabilized in solution at near neutral pH for several months, with (NH(4))(14)Na(4)[(Np(3)W(4)O(15))(H(2)O)(39)BiW(9)O(33))(3)]·62H(2)O crystallising from solution in high yield. At lower pH and [BiW(9)O(33)](9-) : NpO(2)(1+) ratios additional Np(V) species could be observed in solution. Stabilization of [(Np(3)W(4)O(15))(H(2)O)(3)(SbW(9)O(33))(3)](18-) in solution proved more challenging, with several distinctive Np(V) near infra-red transitions observed in solution. Slow complexation kinetics and reduction to Np(IV) was also observed. High [SbW(9)O(33)](9-) : NpO(2)(1+) molar ratios and careful control of solution pH was required to prepare solutions in which [(Np(3)W(4)O(15))(H(2)O)(3)(SbW(9)O(33))(3)](18-) was the only neptunium containing species. In stark contrast to the NpO(2)(1+) chemistry, [BiW(9)O(33)](9-) readily oxidizes PuO(2)(1+) to PuO(2)(2+) yielding further evidence of the decreased stability of Pu(V)vs. Np(V). Np L(II)-edge XAFS measurement revealed very good agreement with single crystal diffraction data for the Np structural environment for [(Np(3)W(4)O(15))(H(2)O)(3)(MW(9)O(33))(3)](18-) (M = Bi, or Sb) in the solid state. There was also good agreement between coordination shells for [(Np(3)W(4)O(15))(H(2)O)(3)(BiW(9)O(33))(3)](18-) in the solid state and in solution, yielding further confirmation of the high stability of this particular cluster.     

Synthesis and structure of a bismuth(III)/chromium(VI) oxo cluster containing a Bi4Cr4O12 core

Bismuth(III) compounds containing the Kl?ui's oxygen tripodal ligand [CpCo{P(O)(OEt)(2)}(3)](-) (L(OEt)(-)) have been synthesized, and their interactions with dichromate in aqueous media were studied. The treatment of Bi(5)O(OH)(9)(NO(3))(4) with NaL(OEt) in water afforded [L(OEt)Bi(NO(3))(2)](2) (1), whereas that of BiCl(3) with NaL(OEt) in CH(2)Cl(2) yielded L(OEt)BiCl(2) (2). Chloride abstraction of 2 with AgX afforded [L(OEt)BiX(2)](2) [X(-) = triflate (OTf(-)) (3), tosylate (OTs(-)) (4)]. In aqueous solutions at pH > 4, 4 underwent ligand redistribution to give the bis(tripod) complex [(L(OEt))(2)Bi(H(2)O)][OTs] (5). The treatment of 4 with Na(2)Cr(2)O(7) in acetone/water afforded the Bi(III)/Cr(VI) oxo cluster [(L(OEt))(4)Bi(4)(μ(3)-CrO(4))(2)(μ(3)-Cr(2)O(7))(2)] (6) containing a unique Bi(4)Cr(4)O(12) oxometallic core. Compound 6 oxidized benzyl alcohol to give ca. 6 equiv of benzaldehyde. The reaction between 2 and CrO(3) yielded [L(OEt)Bi(OCrO(2)Cl)](2)(μ-Cl)(2) (7). The crystal structures of complexes 4-7 have been determined.     

2,6-Mes(2)C(6)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-) (Mes = 2,4,6-Me(3)C(6)H(2)): A compound containing a linear unsolvated two-coordinate gallium cation

The title compound [2,6-Mes(2)C(2)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-), 1, containing a linear two-coordinate gallium cation, has been obtained by metathesis reaction of [2,6-Mes(2)C(2)H(3)](2)GaCl with 2 equiv of Li[Al(OCH(CF(3))(2))(4)] in C(6)H(5)Cl solution at room temperature. Compound 1 has been characterized by (1)H, (13)C((1)H), (19)F, and (27)Al NMR spectroscopy and X-ray crystallography. Compound 1 consists of isolated [2,6-Mes(2)C(6)H(3)](2)Ga(+) cations and Li[Al(OCH(CF(3))(2))(4)](2)(-) anions. The C-Ga-C angle is 175.69(7) degrees, and the Ga-C distances are 1.9130(14) and 1.9145(16) A. The title compound is remarkably stable, is only a weak Lewis acid, and polymerizes cyclohexene oxide.     

Binary pnictogen azides--an experimental and theoretical study: [As(N3)4]-, [Sb(N3)4]-, and [Bi(N3)5(dmso)]2-

[PPh(4)][EI(4)] (E=As, Sb, Bi) salts were reacted with four and five equivalents of AgN(3) to form tetraazidopnictates and pentaazidopnictates of the type [PPh(4)][E(N(3))(4)] and [PPh(4)](2)[E(N(3))(5)], respectively. The synthesis of [PPh(4)][P(N(3))(4)] was also attempted from the reaction of P(N(3))(3) with [PPh(4)]N(3), but it yielded only the starting materials. Herein, we report the synthesis and structure elucidation of [PPh(4)][E(N(3))](4) (E=As, Sb) and pentaazidobismuthate, stabilized as the dimethyl sulfoxide (DMSO) anion adduct, [PPh(4)](2)[Bi(N(3))(5)(dmso)]. Successive anion formation along the series E(N(3))(3)+nN(3)(-) (n=1-3) and E(N(3))(5)+N(3)(-) was studied by density functional theory.     

Direct observation of triple ions in aqueous solutions of nickel(II) sulfate: a molecular link between the gas phase and bulk behavior

Electrospray ionization of an aqueous solution of nickel(II) sulfate provides direct experimental evidence for the formation of triple ions of the type [Ni(2)(SO(4))(H(2)O)(n)](2+) and [Ni(SO(4))(2)](2-), whose existence in aqueous solution has previously been proposed based on relaxation spectroscopy [Chen et al. J. Sol. Chem. 2005, 34, 1045]. Formally, these triple ions are formed by aggregation of the solvated ions Ni(2+) and SO(4)(2-), respectively, with the neutral ion pair NiSO(4). In addition, also higher adducts are observed, e.g. the "pentuple ions" [Ni(3)(SO(4))(2)(H(2)O)(n)](2+) (n = 7-9) and [Ni(2)(SO(4))(3)](2-), of which the dicationic is extensively hydrated, whereas the anionic is not. The structures of the dinuclear nickel clusters are derived from ab initio calculations and their infrared spectra are compared with experimental data obtained for the gaseous ions [Ni(2)SO(4)(H(2)O)(5)](2+) and [Ni(2)(SO(4))(3)](2-), respectively. The calculations show that the structures are crucially controlled by the degree of solvation of nickel ion. Explicit consideration of solvating water molecules within the first coordination sphere suggest that the dicationic triple ion [Ni(2)SO(4)](aq)(2+) is bent and thus bears a permanent dipole moment, whereas the [Ni(SO(4))(2)](aq)(2-) dianion tends to be quasi-linear. The experimental and theoretical data for the gaseous ions thus support the elegant, but indirect, deductions previously made based on solution-phase studies.     

Hydrolysis of a basic bismuth nitrate--formation and stability of novel bismuth oxido clusters

The synthesis of the nanoscaled bismuth oxido clusters [Bi(38)O(45)(NO(3))(20)(DMSO)(28)](NO(3))(4)·4DMSO (1a) and [Bi(38)O(45)(OH)(2)(pTsO)(8)(NO(3))(12)(DMSO)(24)](NO(3))(2)·4DMSO·2H(2)O (2) starting from the basic bismuth nitrate [Bi(6)O(4)(OH)(4)](NO(3))(6)·H(2)O is reported herein. Single-crystal X-ray diffraction analysis, ESI mass spectrometry, thermogravimetric analysis, and molecular dynamics simulation were used to study the formation, structure, and stability of these large metal oxido clusters. Compounds 1a and 2 are based on a [Bi(38)O(45)](24+) core, which is structurally related to δ-Bi(2)O(3). Examination of the fragmentation pathways of 1a and 2 by infrared multi-photon dissociation (IRMPD) tandem MS experiments allows the identification of novel bismuth oxido cluster species in the gas phase.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Electrochemical preparation of the bis(ruthenocenium) dication

The electrochemical oxidation of ruthenocene (1) in CH(2)Cl(2)/[NBu(4)]A, where A = [B(C(6)F(5))(4)](-) or [B(C(6)H(3)(CF(3))(2))(4)](-), gives the dimeric dication [(RuCp(2))(2)](2+), 2(2+), in equilibrium with the 17-electron ruthenocenium ion 1(+). At room temperature the rapid equilibrium accounts for the quasi-Nernstian cyclic voltammetry (CV) behavior (E(1/2) = 0.41 V vs FeCp(2), A = [B(C(6)F(5))(4)](-)). Direct electrochemical evidence for 2(2+) is seen by CV and by bulk electrolysis at 243 K. The bis(ruthenocenium) dication undergoes a highly irreversible two-electron cathodic reaction at E(pc) ca. 0 V. Anodic electrolysis of 1 at 243 K using [B(C(6)H(3)(CF(3))(2))(4)](-) as the supporting electrolyte, followed by cathodic electrolysis of 2(2+), regenerates half of the original 1. Precipitation of 2(2+) occurs when the supporting electrolyte is [B(C(6)F(5))(4)](-), allowing facile isolation of [(RuCp(2))(2)][B(C(6)F(5))(4)](2). A second, unidentified, anodic product also reduces to give back ruthenocene. Digital simulations of the CV curves of 1 at 243 K give a dimerization equilibrium constant of 9 x 10(4) M(-1) for K(eq) = [(RuCp(2))(2)(2+)]/2 [RuCp(2)](+) in CH(2)Cl(2)/0.1 M [NBu(4)][B(C(6)F(5))(4)].     

New nickel(II) and iron(II) helicates and tetrahedra derived from expanded quaterpyridines

As an extension of prior studies involving the linear quaterpyridine ligand, 5,5'-dimethyl-2,2':5',5':2',2'-quaterpyridine 1, the synthesis of the related expanded quaterpyridine derivatives 2 and 3 incorporating dimethoxy-substituted 1,4-phenylene and tetramethoxy-substituted 4,4'-biphenylene bridges between pairs of 2,2'-bipyridyl groups has been carried out via double-Suzuki coupling reactions between 5-bromo-5'-methyl-2'-bipyridine and the appropriate di-pinacol-diboronic esters using microwave heating. Reaction of 2 and 3 with selected Fe(II) or Ni(II) salts yields a mixture of both [M(2)L(3)](4+) triple helicates and [M(4)L(6)](8+) tetrahedra, in particular cases the ratio of the products formed was shown to be dependent on the reaction conditions; the respective products are all sufficiently inert to allow their chromatographic separation and isolation. Longer reaction times and higher concentrations were found to favour tetrahedron formation. The X-ray structures of solvated [Ni(2)(2)(3)](PF(6))(4), [(PF(6)) ? Fe(4)(2)(6)](PF(6))(7), [Fe(4)(3)(6)](PF(6))(8) and [Ni(4)(3)(6)](PF(6))(8) have been determined, while the structure of the parent Fe(II) cage in the series, [(PF(6)) ? Fe(4)(1)(6)](PF(6))(7), was reported previously. The internal volumes of the Fe(II) tetrahedral cages have been calculated and increase from 102 ?(3) for [Fe(4)(1)(6)](8+) to 227 ?(3) for [Fe(4)(2)(6)](8+) to 417 ?(3) for [Fe(4)(3)(6)](8+) and to an impressive 839 ?(3) for [Ni(4)(3)(6)](8+). The corresponding void volume in the triple helicate [Ni(2)(2)(3)](4+) is 29 ?(3).     

Aggregation control by homologous tripodal tetradentate amino acid ligands in oxo-bridged diiron(III) aquo complexes

Isoelectronic oxo-bridged diiron(III) aquo complexes of the homologous tripodal tetradentate amino acid ligands, N,N'-bis(2-pyridylmethyl)-3-aminoacetate (bpg(-)) and N,N'-bis(2-pyridylmethyl)-3-aminopropionate (bpp(-)), containing [(H(2)O)Fe(III)-(mu-O)-Fe(III)(H(2)O)](4+) cores, oligomerise, respectively, by dehydration and deprotonation, or by dehydration only, in reversible reactions. In the solid state, [Fe(2)(O)(bpp)(2)(H(2)O)(2)](ClO(4))(2) (1(ClO(4))(2)) exhibits stereochemistry identical to that of [Fe(2)(O)(bpg)(2)(H(2)O)(2)](ClO(4))(2) (2(ClO(4))(2)), with the ligand carboxylate donor oxygen atoms and the water molecules located cis to the oxo bridge and the tertiary amine group trans to it. Despite their structural similarity, 1(2+) and 2(2+) display markedly different aggregation behaviour in solution. In the absence of significant water, 1(2+) dehydrates and dimerises to give the tetranuclear complex, [Fe(4)(O)(2)(bpp)(4)](ClO(4))(4) (3(ClO(4))(4)), in which the carboxylate groups of the four bpp(-) ligands act as bridging groups between two [Fe(2)(O)(bpp)(2)](2+) units. Under similar conditions, 2(2+) dehydrates and deprotonates to form dinuclear and trinuclear oligomers, [Fe(2)(O)(OH)(bpg)(2)](ClO(4)) (4ClO(4)) and [Fe(3)(O)(2)(OH)(bpg)(3)](ClO(4)) (5(ClO(4))), related by addition of 'Fe(O)(bpg)' units. The trinuclear 5(ClO(4)), characterised crystallographically as two solvates 5(ClO(4)).3H(2)O and 5(ClO(4)).2MeOH, is based on a hexagonal [Fe(3)(O)(2)(OH)(bpg)(3)](+) unit, formally containing one hydroxo and two oxo bridges. The different aggregation behaviour of 1(ClO(4))(2) and 2(ClO(4))(2) results from the difference of one methylene group in the pendant carboxylate arms of the amino acid ligands.     

Nitrosyl induces phosphorous-acid dissociation in ruthenium(II)

The trans-[Ru(NO)(NH(3))(4)(P(OH)(3))]Cl(3) complex was synthesized by reacting [Ru(H(2)O)(NH(3))(5)](2+) with H(3)PO(3) and characterized by spectroscopic ((31)P-NMR, δ = 68 ppm) and spectrophotometric techniques (λ = 525 nm, ε = 20 L mol(-1) cm(-1); λ = 319 nm, ε = 773 L mol(-1) cm(-1); λ = 241 nm, ε = 1385 L mol(-1) cm(-1); ν(NO(+)) = 1879 cm(-1)). A pK(a) of 0.74 was determined from infrared measurements as a function of pH for the reaction: trans-[Ru(NO)(NH(3))(4)(P(OH)(3))](3+) + H(2)O ? trans-[Ru(NO)(NH(3))(4)(P(O(-))(OH)(2))](2+) + H(3)O(+). According to (31)P-NMR, IR, UV-vis, cyclic voltammetry and ab initio calculation data, upon deprotonation, trans-[Ru(NO)(NH(3))(4)(P(OH)(3))](3+) yields the O-bonded linkage isomer trans- [Ru(NO)(NH(3))(4)(OP(OH)(2))](2+), then the trans-[Ru(NO)(NH(3))(4)(OP(H)(OH)(2))](3+) decays to give the final products H(3)PO(3) and trans-[Ru(NO)(NH(3))(4)(H(2)O)](3+). The dissociation of phosphorous acid from the [Ru(NO)(NH(3))(4)](3+) moiety is pH dependent (k(obs) = 2.1 × 10(-4) s(-1) at pH 3.0, 25 °C).     

Novel lanthanoid thioantimonates: the first coexistence of different types of thioantimonate anions in the same framework

Two novel lanthanoid thioantimonates [Sm(4)(tepa)(4)(μ-η(2),η(3)-Sb(3)S(7))(2)(μ-Sb(2)S(4))] (1, tepa = tetraethylenepentamine) and [Eu(2)(tepa)(2)(μ-SbS(3))(μ-OH)](2)(SbS(4))(OH)·H(2)O (2) were solvothermally synthesized. Compound 1 represents the only example of different types of [Sb(3)S(7)](5-) and [Sb(2)S(4)](2-) anions coexisting in the same lanthanoid thioantimonate framework, while 2 displays rare mixed-valent Sb(3+)/Sb(5+) character with the Sb(3+) in a noncondensed pyramid [Sb(III)S(3)](3-). The theoretical band structure and luminescence properties have also been investigated.     

Preparation and Properties of the Corner-Shared Double Cube [Mo(6)BiS(8)(H(2)O)(18)](8+) as a Derivative of [Mo(3)S(4)(H(2)O)(9)](4+) in Aqueous Acidic Solutions

The reaction of [Mo(3)S(4)(H(2)O)(9)](4+) with Bi(III) in the presence of BH(4)(-) (rapid), or with Bi metal shot (3-4 days), gives a heterometallic cluster product. The latter has been characterized as the corner-shared double cube [Mo(6)BiS(8)(H(2)O)(18)](8+) by the following procedures. Analyses by ICP-AES confirm the Mo:Bi:S ratio as 6:1:8. Elution from a cation-exchange column by 4 M Hpts (Hpts = p-toluenesulfonic acid), but not 2 M Hpts (or 4 M HClO(4)), is consistent with a high charge. The latter is confirmed as 8+ from the 3:1 stoichiometries observed for the oxidations with [Co(dipic)(2)](-) or [Fe(H(2)O)(6)](3+) yielding [Mo(3)S(4)(H(2)O)(9)](4+) and Bi(III) as products. Heterometallic clusters [Mo(6)MS(8)(H(2)O)(18)](8+) are now known for M = Hg, In, Tl, Sn, Pb, Sb, and Bi and are a feature of the P-block main group metals. The color of [Mo(6)BiS(8)(H(2)O)(18)](8+) in 2.0 M Hpts (turquoise) is different from that in 2.0 M HCl (green-blue). Kinetic studies (25 degrees C) for uptake of a single chloride k(f) = 0.80 M(-)(1) s(-)(1), I = 2.0 M (Hpts), and the high affinity for Cl(-) (K > 40 M(-)(1)) exceeds that observed for complexing at Mo. A specific heterometal interaction of the Cl(-) not observed in the case of other double cubes is indicated. The Cl(-) can be removed by cation-exchange chromatography with retention of the double-cube structure. Kinetic studies with [Co(dipic)(2)](-) and hexaaqua-Fe(III) as oxidants form part of a survey of redox properties of this and other clusters. The Cl(-) adduct is more readily oxidized by [Co(dipic)(2)](-) (factor of approximately 10) and is also more air sensitive.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

New mixed metal selenites and tellurites containing Pd2+ ions in a square planar geometry

Four novel mixed metal selenites or tellurites containing PdO(4) squares, namely, BaPd(SeO(3))(2), Bi(2)Pd(SeO(3))(4), and Pb(2)Pd(QO(3))(2)Cl(2) (Q = Se, Te), have been prepared and structurally characterized by single crystal X-ray diffraction analyses. These compounds exhibit three different types of anionic structures. BaPd(SeO(3))(2) contains one-dimensional (1D) [Pd(SeO(3))(2)](2-) anionic chains composed of PdO(4) units linked by SeO(3)(2-) groups in a bidentate bridging fashion. Bi(2)Pd(SeO(3))(4) exhibits a complicated 3D architecture constructed by [Bi(SeO(3))](+) and [Pd(SeO(3))(2)](2-) layers that are alternating along the a-axis. The [Pd(SeO(3))(2)](2-) layers are composed of Pd(2+) ions bridged by SeO(3)(2-) anions in a bidentate fashion. Pb(2)Pd(QO(3))(2)Cl(2) (Q = Se, Te) features zero-dimensional (0D) [Pd(QO(3))Cl(2)](4-) (Q = Se, Te) anionic clusters, which are further bridged by Pb(2+) cations into a 3D network. The results of optical diffuse-reflectance spectrum measurements and band structure calculations based on DFT methods indicate that all the compounds are wide-band-gap semiconductors.