Strength of reinforced plastics under static loading

The question of the static fatigue of reinforced plastics is considered for plane stress. Relations that predict the static fatigue are given for very simple types of loading. Experimental data are presented for thin-walled tubes of SVAM (5:1) glass-reinforced plastic subjected to long-time tests at constant internal pressure.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 265–273, March–April, 1969.     

Correlation between static and fatigue strength of reinforced plastics

The conventional estimation of the fatigue strength of glass-fiber-reinforced plastics from the static strength in tension is shown to be inefficient by analysis of experimental data. It was found that a more reliable correlation is observed between their static and fatigue strengths as a result of referring _–1 to *, where * is the smaller of the stresses in tension or compression, determined from the inflection points on the static deformation curves. Views are expressed on the use of the correlation found for reducing the amount of fatigue tests.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, Vol. 9, No. 3, pp. 468–474, May–June, 1973.     

Programmed static testing machine for polymer materials

The operation, design and technical characteristics of a machine for conducting static tests on polymer materials are described. The results of experiments to determine the accuracy of execution of a given program are presented.Scientific Research and Design Institute of Testing Machines, Instruments, and Means of Measuring Masses, Moscow. Translated from Mekhanika Polimerov, No. 5, pp. 931–933, September–October, 1969.     

Possibilities of using light propagation for the nondestructive testing of reinforced plastics

The results of an investigation of the effect of the structural parameters on the light propagation properties of layered reinforced plastics are presented. The object of the investigation was to explore the possibilities of using the light propagation properties for nondestructive testing. A laboratory optical apparatus and measuring technique are described.     

Structural stresses in reinforced plastics

The safety parameters at any given point of a microinhomogeneous medium simulating the structure and properties of reinforced plastics are determined by solving the statistical boundary value problem. The results are illustrated in relation to randomly reinforced glass laminates.Mekhanika Polimerov, Vol. 3, No. 3, pp. 413–420, 1967     

Continuity condition for orthogonally reinforced plastics in tension

The proposed continuity condition is based on the hypothesis that the time dependence of the strength and limiting strain of the resin is determined by the limiting value of the specific work done by the stresses. The case when the reinforcement is elastic and the rheological properties of the resin are described by a linear differential equation is considered.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, Vol. 4, No. 5, pp. 844–852, September–October, 1968.     

Elastic constants of randomly reinforced plastics

A previously developed [4] general method of solving the nonlinear (in the statistical sense) boundary value problem of the theory of elasticity is used to determine the macroscopic moduli of elasticity of randomly reinforced plastics whose structure is simulated by a two-phase microinhomogeneous medium. The macroscopic modulus is represented in the form of a series composed of the sum of the mean value of the modulus and a sequence of corrections that take into account the central moments of the distribution of elastic constants. The limits of convergence of this series are established. The values of the macroscopic moduli for a glass-reinforced plastic obtained by calculation are compared with the experimental data.Mekhanika Polimerov, Vol. 3, No. 2, pp. 259–265, 1967     

Longitudinal shear of unidirectionally reinforced plastics

The deformation and strength properties of undirectionally reinforced plastics in longitudinal shear are investigated. A law of shear deformation that takes into account the nonlinear properties of the matrix is established. Two modes of failure of the reinforced plastic are examined. The dependence of the shear strength of the plastic on the volume reinforcement content and the strength properties of the matrix is investigated.     

Nonlinear stress-strain relations for carbon-reinforced plastics under continuous static loading

The specific characteristics of oriented reinforced polymers are quite fully taken into account by a nonlinear anisotropic theory of the same type as the nonlinear theory of elasticity or the deformation theory of plasticity, based on the use of tensor-linear relations containing two quadratic forms of the stress components without the introduction of higher-order tensors. The possibility of extending this theory to the case of uniaxial deformation of carbon-reinforced composites is demonstrated.Moscow. Translated from Mekhanika Polimerov, No. 1, pp. 49–53, January–February, 1976.     

Statistical theory of elasticity of reinforced plastics

A method of solving statistical boundary value problems in the stresses is proposed for microinhomogeneous composite media simulating the structure and properties of reinforced plastics. The coefficients of variation of the physical properties of the medium are not assumed small. Numerical examples are presented.Mekhanika Polimerov, Vol. 4, No. 3, pp. 438–444, 1968Presented on 5 June 1967 at a scientific seminar held at the Institute of Polymer Mechanics of the Academy of Sciences of the Latvian SSR.     

Theory of thermostructural stresses in reinforced plastics

A method is proposed for determining the mean values of the initial thermostructural stresses in reinforcement and matrix resulting from the uniform cooling of a two-component unloaded elastic body from the natural state (resin hardening temeprature) to the working temperature (external loading).V. A. Steklov Mathematical Institute, Sverdlovsk Branch, Academy of Sciences of the USSR. S. M. Kirov Ural Polytechnic Institute, Sverdlovsk. Translated from Mekhanika Polimerov, Vol. 4, No. 5, pp. 822–828, September–October, 1968.     

Micromechanical strength analysis of fiber reinforced plastics

Strength of an unidirectional lamina is computed with a representative volume element. An approximative “voxel” meshing method is used in conjunction with continuum damage mechanics to simulate crack growth in the RVE. Two material models for the nonlinear material behaviour of the epoxy resin are compared. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Strength of orthogonally reinforced plastics in uniaxial tension

Failure conditions are proposed for an orthogonally reinforced plastic in uniaxial tension at an arbitrary angle to the directions of reinforcement. The failure conditions are formulated for the case when the strength of the bond between the resin and the reinforcement is greater than the strength of the resin. The strength of the resin, which is in a volume state of stress, is determined by an energy criterion.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 629–633, July–August, 1973.     

Structural theory of the strength of reinforced plastics

Conclusions In the present study, we developed structural criteria that make it possible to predict at the component level (polymer binder, fibers) and interface level the long-term strength of laminated reinforced plastics in a plane stress state. The proposed relations make it possible to evaluate the effect of the rheological properties of the components, their volume fractions, and the geometry of the structure of the laminated packet on the long-term strength of reinforced plastics. The relations also permit resolution of the inverse problem: efficiently design the structure of such materials for specific loading conditions.Translated from Mekhanika Kompozitnykh Materialov, No. 5, pp. 833–839, September–October, 1989.     

Short-time strength of reinforced plastics in uniaxial compression

The short-time compressive strength of one-way and two-way reinforced plastics compressed in the direction of the axes of elastic symmetry has been theoretically and experimentally investigated with allowance for the mechanical properties of the components and the orientation of the fracture (shear) plane.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 621–628, July–August, 1969.