Experimental investigation on electro-mechanically coupled cyclic deformation of laterally constrained dielectric elastomer

A series of electro-mechanically coupled cyclic tests at large deformation are carried out to characterize the cyclic deformation of a laterally constrained dielectric elastomer (DE) in this work. In the strain-controlled cyclic tests of the dielectric elastomer (e.g., VHB 4910 DE) with a constant or cyclic voltage, cyclic stress softening occurs and is influenced by the phase-angle difference between the applied cyclic strain and cyclic voltage. In the stress-controlled cyclic tests of VHB 4910 DE with a constant or cyclic voltage, ratchetting (a cyclic accumulation of inelastic strain) takes place; the ratchetting strain is considerably enhanced by applying higher voltage level, higher stress level and lower stress rate, and is also affected by the phase-angle difference between the applied cyclic stress and cyclic voltage. Moreover, the remarkable recovery of residual strain after the cyclic tests demonstrates that the cyclic stress softening and ratchetting of VHB 4910 DE mainly stem from the viscoelasticity. The comprehensive experimental observations are very useful to develop, calibrate and validate an electro-mechanically coupled constitutive model of dielectric elastomers.     

Cyclic polysiloxanes

The preparation, fractionation and characterisation of synthetic cyclic polysiloxanes (R(CH₃)SiO)_x are reviewed. Particular emphasis is given to the cyclic poly(dimethylsiloxanes) (PDMS) (R is CH₃) cyclic poly(phenylmethylsiloxanes)(PPMS) (R is C₆H₅) and cyclic poly(vinylmethylsiloxanes) (PVMS) (R is CH₂=CH). The application of high performance liquid chromatography (HPLC) and analytical and preparative gel permeation chromatography (GPC) to the preparation and characterisation of cyclic polysiloxanes is discussed. The methods include preparation of sharp fractions of relatively high molar mass cyclic polymers (with heterogeneity indices typically ca. 1.05) and comparison of the GPC and retention volumes of cyclics with the corresponding linear polymers. Investigations of the cyclic polymers prepared have been made using a number of experimental methods and techniques. These include dilute solution viscometry and low angle neutron scattering. Comparisons are drawn between cyclic PDMS and other cyclic polysiloxanes and also between cyclic polysiloxanes and the corresponding commercially-important linear polymers.     

Isolation and identification of the linear and cyclic oligomers of poly(ethylene terephthalate) and the mechanism of cyclic oligomer formation

Chromatographic techniques are described which can be used to isolate and identify the linear and the cyclic oligomers of poly(ethylene terephthalate). Extraction of the oligomers from high molecular weight polymer produces at least eight different cyclic species, some of which are isolated and identified. The cyclic dimer, the cyclic trimer, and the cyclic tetramer of poly(ethylene terephthalate) have also been prepared by acid chloride esterification and transesterification. Similar materials can be isolated from the ethylene glycol distillate obtained from the polymer melt. The mechanism of cyclic oligomer formation has been studied by determining the rate of formation of the cyclic oligomers during polymerization and during melt extrusion of polyesters which did not initially contain cyclic oligomers. The rate of formation depends upon the concentration of hydroxyl groups; hence, the cyclic oligomers are formed by transesterification from the chain ends or cyclodepolymerization. Therefore oligomers are inevitably produced during polymerization.     

Effects of sodium salicylate on the febrile response and increased levels of cyclic AMP in cerebrospinal fluid during endogenous pyrogen-induced fever in rabbits

To further evaluate the causality between endogenous pyrogen (EP)-induced fever and cyclic adenosine-3',5'-monophosphate (cyclic AMP) level, the effects of sodium salicylate (SS) on the febrile response and increased levels of cyclic AMP in both cerebrospinal fluid (c.s.f.) and plasma during EP-induced fever in rabbits were observed. The results suggest that cyclic AMP is probably involved in the central mediation of EP-induced fever and that increased concentration of cyclic AMP in c.s.f. associated with EP-induced fever is not the result of temperature elevation but appears to be caused by the increased synthesis in the central nervous system. In addition it is confirmed that blood is impossibly a contributory source of increased cyclic AMP in c.s.f. during EP fever, and that SS may act subsequent to the increase in cyclic AMP.     

Cyclic polymers: past,present and future

Methods for characterising cyclic polymers are illustrated by reference first to dilute solution methods for cyclic poly(dimethylsiloxane) (PDMS) and then to the entrapment of cyclic polymers in networks. Preparative routes to cyclic polymers are then reviewed, including ring-chain equilibration reactions, coupling and condensation reactions and new methods using polymer-supported reagents. Some of the properties of cyclic PDMS are discussed, including differences between ring and chain polymer properties such as their melt viscosities and glass transition temperatures. Methods for preparing the first polymeric catenanes are described, using polymer-supported reagents. Future directions for cyclic polymer chemistry are indicated, including topological polymer chemistry.     

环状碳酸酯低聚物的合成及其开环聚合的研究

环状碳酸酯低聚物的合成及其开环聚合的研究陈雨萍魏玮李革（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词环状碳酸酯低聚物，聚碳酸酯，开环聚合环状单体的开环聚合在合成高聚物方面具有突出的优点，即在聚合过程中没有副产物、热效应低、聚合...     

Cyclic Acetal-Photosensitized Polymerization. XII. Photopolymerizations of Styrene and Methyl Methacrylate in the Presence of Polycyclic Acetals

Styrene (St) and methyl methacrylate (MMA) were photopolymerized in the presence of poly-2-vinyl-1,3-dioxolane (PVDO), poly-2-vinyl-4-hydroxymethyl-1,3-dioxolane (PVHDO), or the terpolymer of vinyl formal/vinyl acetate/vinyl alcohol (PVFAcA) at 30 or 40°C. The ability to accelerate the photopolymerization increased in the order PVFAcA < PVHDO < PVDO; the ability of pendent cyclic acetal was larger than that of cyclic acetals which are not pendent. Moreover, the promoting ability per cyclic acetal increased with the increase in the number of cyclic acetal cyclic acetal group in the molecule.     

Controlled ring‐expansion polymerization of thiiranes based on cyclic aromatic thiourethane initiator

Ring‐expansion polymerization (REP) of thiiranes was investigated using 3H‐benzothiazol‐2‐one (BT) as the cyclic aromatic thiourethane initiator in the presence of tetrabutylammonium chloride (TBAC) catalyst. The polymerization proceeded in a well‐controlled manner to afford cyclic polysulfides with one BT moiety per macrocycle, as confirmed by MALDI‐TOF MS spectroscopy. Differential scanning calorimetry (DSC) measurement of the obtained cyclic polysulfides revealed slight decrease in the glass‐transition temperature as the increase in the molecular weight, supporting the cyclic topology of the products. Postpolymerization of thiiranes using the BT‐initiated cyclic polysulfide as the macroinitiator afforded the ring‐expanded product while maintaining the narrow polydispersity and well‐defined cyclic structure, which enabled precise synthesis of cyclic block copolymer with different thiirane combination. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2442–2449     

Polymerization chemistry of the family of cyclic imino ethers

Characteristics of the polymerization mechanisms of the family of cyclic imino ethers are described. The variety of the mechanism of propagation has been systematized on the basis of the nature of propagating species, i.e., cationic or electrophilic covalent (dipole) species. In the polymerizations of 2-alkyl cyclic imino ethers (5- and 6-membered), propagation mechanism via one of these two different species has been established, which is dependent upon the relative nucleophilic reactivities of the monomer and the counter anion derived from initiator. The polymerization of cyclic pseudoureas having a cyclic amine substituent at 2-position proceeds in two different ways. Ionic propagation leads to the single isomerization/ring-opening polymerization involving only the cyclic imino ether ring. On the other hand, covalent propagation gives rise to the double isomerization ring-opening polymerization involving the two rings of cyclic imino ether and cyclic amine. Polymerization of 5-membered cyclic iminocarbonate with a sulfonate initiator proceeds through the isomerization/ring-opening of 2-oxazoline ring. The same monomer was isomerized to the corresponding cyclic urethane when it was treated with benzyl bromide.     

Activation of cyclic AMP-dependent protein kinase and stimulation of protein phosphorylation in response to adenosine in C-1300 murine neuroblastoma.

DEAE-cellulose chromatography of the 20,000g supernatant fraction of homogenates of C-1300 murine neuroblastoma (clone N2a) yields one major and two minor peaks of cyclic AMP-dependent protein kinase activity. Assessment of the endogenous activation state of the enzyme(s) reveals that the enzyme is fully activated by the treatment of whole cells with adenosine (10 microM) in the presence of the phosphodiesterase inhibitor Ro 20 1724 (0.7 mM). This treatment produces a large elevation in the cyclic AMP content of the cells. The treatment of whole cells with adenosine alone (1-100 microM) or Ro 20 1724 alone (0.1-0.7 mM) produces minimal elevations in cyclic AMP but nevertheless causes significant activations of cyclic AMP-dependent protein kinase. The autophosphorylation of whole homogenates of treated and untreated cells was studied using [gamma-32P] ATP, sodium dodecyl sulfate-polyacrylamide gel electrophoresis and autoradiography. Treatments which activate cyclic AMP-dependent protein kinase selectively stimulate the incorporation of 32P into several proteins. This stimulation is most prominent in the 15,000-dalton protein band. The addition of cyclic AMP to phosphorylation reactions containing homogenate of untreated cells stimulates the phosphorylation of the same protein bands. These results indicate that adenosine may have regulatory functions through its effect on the cyclic AMP:cyclic AMP-dependent protein kinase system.     

Special odd-even effect of degree of oligomerization on properties of cyclic oligoesters

We demonstrate here seven pure cyclic samples,which belongs to two series of oligoesters,cyclic oligo(trimethylene terephthalate)s(COTTs) and cyclic oligo(butylene terephthalate)s(COBTs),showing odd-even effect of degree of oligomerization(repeating units number) on properties.The pentamer of COTT and trimer of COBT show much lower melting temperature,and the trimer of COTT and trimer of COBT show significant lower refractive index,which can be ascribed to the low packing density of cyclic oligoesters with odd number of degree of oligomerization.Our results reveal the discrete property change as a function of cyclic size of oligomers,which can be used to design materials with special properties.     

SYNTHESIS, CHARACTERIZATION AND RING-OPENING POLYMERIZATION OF CYCLIC (ARYLENE PHOSPHONATE) OLIGOMERS

INTRODUCTIONThe use of cyclic oligomers as macrocyclic precursors for the preparation of high performance polymers byring-opening polymerization (ROP) has sparked much interest in recent years. It could produce a revolutionarychange in the preparation of advanced composite materials, and is of great importance in the polymerizationprocess yielding polymers such as the reinforced reactive injection model (RRIM) and the resin transfer model(RTM) etc. Within the last 10 years, the synthes…     

Separation and quantification of the linear and cyclic structures of polyamide-6 at the critical point of adsorption

The linear and cyclic structures of polyamide-6 were separated by liquid chromatography at critical conditions (LCCC) and identified with different mass spectrometric (MS) techniques and quantitated by LCCC with evaporative light-scattering detection (ELSD). Electrospray ionization MS was not suitable to identify the higher cyclic structures. For this purpose, matrix-assisted laser desorption ionization time-of-flight MS performed better and cyclic and linear structures were oligomerically resolved and separately identified in the mass spectrometer. The highest cyclic structure present and detected was the cyclic pentacontamer. It could be demonstrated that cyclic and linear oligomers follow different ionization and fragmentation routes/patterns. Quantification with ELSD of the components separated by LCCC using a universal calibration curve or an iterative procedure was developed. An area correction to account for different peak widths of coeluting components improves precision and accuracy of the calibration curve and improves quantitation accuracy for the samples analyzed. With these corrected values, no molecular mass dependency was observed for the cyclic and linear structures. Under critical conditions, the linear and cyclic structures of polyamide-6 were separated, identified and quantified.     

EFFECTS OF SODIUM SALICYLATE ON THE FEBRILE RESPONSE AND INCREASED LEVELS OF CYCLIC AMP IN CEREBRO-SPINAL FLUID DURING ENDOGENOUS PYROGEN-INDUCED FEVER IN RABBITS

To further evaluate the causality between endogenous pyrogen (EP)-induced fever andcyclic adenosine- 3', 5'- monophosphate (cyclic AMP) level. the effects of sodium salicylate(SS) on the febrile response and increased levels of cyclic AMP in both cerebrospinal fluid(c.s.f.) and plasma during EP- induced fever in rabbits were observed. The results suggestthat cyclic AMP is probably involved in the central mediation of EP-induced fever and thatincreased concentration of cyclic AMP in c.s.f. associated with EP- induced fever is not theresult of temperature elevation but appears to be caused by the increased synthesis in the cen-tral nervous system. In addition it is confirmed that blood is impossibly a contributorysource of increased cyclic AMP in c.s.f. during EP fever, and that SS may act subsequentto the increase in cyclic AMP.     

Self-assembly of oligothiophene chromophores by m-calix[3]amide scaffold

m-Calix[3]amides carrying the bithiophene chromophore (BTC3A) and terthiophene chromophore (TTC3A) were synthesized by the cyclic trimerization of m-aminobenzoic acid esters for the purpose of the control and understanding of the self-assembly of oligothiophene chromophores. Polymers and model compounds were also prepared for comparison. From the (1)H NMR experiments, cyclic trimer BTC3A showed the syn/anti equilibrium in solution, and the syn/anti conformer ratio (76/24 in CDCl(3)) was influenced by the solvent character. Namely, the population of the syn conformer was lowest (70%) in THF-d(8) and was highest (86%) in CDCl(3)/CD(3)OD (1/1 in volume). On the other hand, the population of the syn conformer of cyclic trimer TTC3A was high (84%) even in CDCl(3). In a CHCl(3) solution of cyclic trimer BTC3A, the absorption maximum (342 nm) blue-shifted and the emission maximum (448 nm) red-shifted compared with those of polymer BTPA and model compound BTM. The solvent character also had an impact on the optical properties of cyclic trimer BTC3A. The red-shifted emission maximum (481 nm) of cyclic trimer BTC3A in CH(3)OH indicated the interaction between three bithiophene chromophores. The emission maxima of cyclic trimer TTC3A (486 nm) demonstrated a small red-shift from model compound TTM (477 nm), and no solvent dependency was observed, unlike cyclic trimer BTC3A.     

Chain length dependence of the thermodynamic properties of linear and cyclic alkanes and polymers

The specific heat capacity was measured with step-scan differential scanning calorimetry for linear alkanes from pentane (C(5)H(12)) to nonadecane (C(19)H(40)), for several cyclic alkanes, for linear and cyclic polyethylenes, and for a linear and a cyclic polystyrene. For the linear alkanes, the specific heat capacity in the equilibrium liquid state decreases as chain length increases; above a carbon number N of 10 (decane) the specific heat asymptotes to a constant value. For the cyclic alkanes, the heat capacity in the equilibrium liquid state is lower than that of the corresponding linear chains and increases with increasing chain length. At high enough molecular weights, the heat capacities of cyclic and linear molecules are expected to be equal, and this is found to be the case for the polyethylenes and polystyrenes studied. In addition, the thermal properties of the solid-liquid and the solid-solid transitions are examined for the linear and cyclic alkanes; solid-solid transitions are observed only in the odd-numbered alkanes. The thermal expansion coefficients and the specific volumes of the linear and cyclic alkanes are also calculated from literature data and compared with the trends in the specific heats.     

Synthesis, characterization, and field-effect transistor properties of carbazolenevinylene oligomers: from linear to cyclic architectures

Two cyclic carbazolenevinylene dimers 1 and 2 were synthesized by McMurry coupling reactions. A linear compound 3 was also prepared for comparison. Compounds 1-3 were fully characterized by means of NMR spectroscopy, HRMS, elemental analysis, and UV/Vis absorption spectroscopy. Quantum chemical simulations showed that the cyclic compounds possessed smaller HOMO-LUMO gaps and more extended conjugation. The UV/Vis absorption spectra of the cyclic compounds showed blueshifts compared with that of the linear compound 3. Time-dependent DFT (TD-DFT) analysis revealed that this was due to the different selection rules for molecules with cyclic and linear architectures. The cyclic conformation also significantly affected the molecular ordering in the solid state. The X-ray crystal structure of 1 showed partial pi-pi overlapping between the adjacent molecules. Thin films of 1-3 were fabricated by the vacuum-deposition method on Si/SiO(2) substrates. Multicrystalline thin films were obtained from compounds 1 and 2, but only amorphous thin films could be obtained for the linear compound 3. Another important difference between the cyclic and linear compounds was the reduced reorganization energy for the cyclic compounds. These two facts have resulted in improved field-effect transistor (FET) mobilities for the cyclic compounds compared with the linear compound. In addition, as the substrate temperature has a significant influence on the morphology and the degree of crystallinity of the thin films deposited, the device performance could be optimized by varying the substrate temperature. The FET devices based on 2 gave the highest mobility of 0.013 cm(2) V(-1) s(-1). The results showed that carbazole derivatives with cyclic structures might make better FETs.     

二[氧合-二(3-二茂铁基丙烯酸二正丁基锡(Ⅳ))]配合物的合成及谱学表征

由FcCH=CHCO2H和(n Bu)2SnO反应合成了{[(FcCH=CHCO2)Sn(n Bu)2]2O}2(A)新配合物[其中Fc=(η5 C5H5)Fe(η5 C5H4)].经红外光谱和核磁共振(1H、13C、119Sn)谱学研究, 确定其组成和结构.提出 [(RCOOSnR′2)2O]2类化合物中一一指认与内环锡、外环锡键连的两类烷基R′中各个碳峰的原则.     

Fragmentation and sequencing of cyclic peptides by matrix-assisted laser desorption/ionization post-source decay mass spectrometry.

A series of synthetic cyclic decapeptides and other smaller cyclic peptides were analyzed using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. The investigated compounds were cyclized in a head-to-tail manner and contained non-proteinaceous amino acids, such as D-phenylalanine, D,L-4-carboxyphenylalanine, epsilon-aminocaproic acid, and gamma-aminobutyric acid, and were synthesized in a program to develop inhibitors of pp60(c-src) (Src), a tyrosine kinase that is involved in signal transduction and growth regulation. Post-source decay (PSD) spectra of the cyclic peptides featured abundant sequence ions. Two preferential ring opening reactions were detected resulting in linear fragment ions with an N-terminus of proline and a C-terminus of glutamic acid, respectively. MALDI-PSD spectra even permitted de novo sequencing of some cyclic peptides. Systematic studies on cyclic peptides using this method of fragmentation have not been reported to date. This work presents an easy mass spectrometric method, MALDI-PSD, for the characterization and identification of cyclic peptides.     

Study of the thermal evolution of the cyclic‐oligomer formation in a cyclic‐oligomer‐free PET

A low percentage of cyclic oligomers can be found in poly(ethylene terephthalate) (PET) from its synthesis onward. In this article, a cyclic‐oligomer‐free PET (COFP) obtained by solvent extraction was used to study the thermodynamics of the re‐formation of cyclics from the melt. The cyclic‐oligomer content re‐increased into molten COFP, finally reaching an equilibrium. An analysis of the fraction of the re‐formed cyclic oligomers showed that a majority of cyclic trimer (60–70%) was found at the equilibrium. Before the establishment of the equilibrium, an unusual behavior was observed in the relative proportion of cyclic trimer and tetramer during the first steps of their formation that was probably due to a competition between kinetic and thermodynamic products. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 416–422, 2000