Exact quantum and TST-CEQ study of the collinear reaction O+HCl

Exact quantum calculations of reaction probabilities have been carried out using hyperspherical coordinates for the collinearr reaction O+HCl(v <1) -OH(v'<1)+Cl . A generalized LEPS potential energy surface with a barrier height of 8.12 kcal/mol has been used in the calculations. According to the calculated results we found that (1) the reaction probability oscillates with energy, (2) the reaction probability shows vibrational adiabaticity, although it is poorer than that for symmetric reaction Cl + HC1. The analysis of resonance has also been done. The reaction rate constants and average cross sections have been calculated by TST-CEQ method. The rate constants are in agreement with that by QCT and smaller than the experimental one. Finally, the threshold has been estimated and is in good agreement with that of the literature.     

Searching for resonances in the reaction Cl+CH4-->HCl+CH3: quantum versus quasiclassical dynamics and comparison with experiments

A quantum-mechanical (QM) and quasiclassical trajectory (QCT) study was performed on the title reaction, using a pseudotriatomic ab initio based surface. Probabilities and integral cross sections present some clear peaks versus the collision energy E(col), which we assign to Feshbach resonances of the transition state, where the light H atom oscillates between the heavy Cl and CH(3) groups. For ground-state reactants, reactivity is essentially of quantum origin (QCT observables and oscillations are smaller, or much smaller, than QM ones), and the calculated integral cross section and product distributions are in reasonable agreement with the experiment. The reaction occurs through an abstraction mechanism, following both a direct and an indirect mechanism. The quasiclassical trajectory calculations show the participation of a short-lived collision complex in the microscopic reaction mechanism. Finally, QCT differential cross sections of Cl+CH(4)-->HCl (nu(')=0 and 1)+CH(3) oscillate versus E(col), whereas experimentally this only occurs for HCl (nu(')=1). This theoretical result and other oscillating properties found here could, however, be related to the existence of a Feshbach resonance for the production of HCl (nu(')=1), as suggested by experimentalists.     

State-to-state dynamics analysis of the F + CHD3 reaction: a quasiclassical trajectory study

An exhaustive state-to-state dynamics study was performed to analyze the F + CHD3 --> FD(nu', j') + CHD2(nu) gas-phase abstraction reaction. Quasiclassical trajectory (QCT) calculations, including corrections to avoid zero-point energy leakage along the trajectories, were performed at different collision energies on an analytical potential energy surface (PES-2006) recently developed by our group. Whereas the CHD2 coproduct appears vibrationally and rotationally cold, most of the available energy appears as FD(nu') product vibrational energy, peaking at nu' = 2 and nu' = 3, with the population in the latter level growing as the energy increases. The excitation function rises from the threshold of the reaction and then levels off at higher energies, with the maximum contribution from the FD(nu' = 3) level. The state-specific FD(nu') scattering distributions correlated with the coproduct CHD2 in the nu4 = 2 and nu3 = 1 states, at different collision energies, show a steady change from backward to forward scattering as the energy increases. This similar behavior for the two coproduct vibrational states, nu4 = 2 and nu3 = 1, agrees qualitatively with the experimental measurements. Comparison with theoretical and experimental results for the isotopic analogues, F + CH4 and F + CD4, shows that the title reaction presents a direct mechanism, similar to the perdeuterated reaction, but contrasts with that of the F + CH4 reaction. These results for the dynamics of different isotopic variants, always in qualitative and sometimes in quantitative agreement with experiment, show the capacity of the PES-2006 surface to correctly describe the title reaction, even though there are differences that could be due to deficiencies of the PES but also to the known limitations of the classical treatment in the QCT method.     

Energy partitioning in the reaction O(1D) + H2O → OH + OH.: The influence of O(1D) translational energy on the reaction rate constant

For the exothermic reaction O (¹D) + H₂O → OH + OH the rate constant and its energy dependence were determined by monitoring the concentration of the OH product. This was done by integrating the distribution of product molecules over all accessible states. The rate constant, determined at different velocity distributions of the reacting metastable over a wide range, is energy independent.     

A quantum wave packet dynamics study of the N(2D) + H2 reaction

We report a dynamics study of the reaction N((2)D) + H(2) (v=0, j=0-5) --> NH + H using the time-dependent quantum wave packet method and a recently reported single-sheeted double many-body expansion potential energy surface for NH(2)(1(2)A' ') which has been modeled from accurate ab initio multireference configuration-interaction calculations. The calculated probabilities for (v=0, j=0-5) are shown to display resonance structures, a feature also visible to some extent in the calculated total cross sections for (v=0, j=0). A comparison between the calculated centrifugal-sudden and coupled-channel reaction probabilities validate the former approximation for the title system. Rate constants calculated using a uniform J-shifting scheme and averaged over a Boltzmann distribution of rotational states are shown to be in good agreement with the available experimental values. Comparisons with other theoretical results are also made.     

Stringent test of the statistical quasiclassical trajectory model for the H+3 exchange reaction: a comparison with rigorous statistical quantum mechanical results

A complete formulation of a statistical quasiclassical trajectory (SQCT) model is presented in this work along with a detailed comparison with results obtained with the statistical quantum mechanical (SQM) model for the H+ +D2 and H+ +H2 reactions. The basic difference between the SQCT and the SQM models lies in the fact that trajectories instead of wave functions are propagated in the entrance and exit channels. Other than this the two formulations are entirely similar and both comply with the principle of detailed balance and conservation of parity. Reaction probabilities, and integral and differential cross sections (DCS's) for these reactions at different levels of product's state resolution and from various initial states are shown and discussed. The agreement is in most cases excellent and indicates that the effect of tunneling through the centrifugal barrier is negligible. Some differences are found, however, between state resolved observables calculated by the SQCT and the SQM methods which makes use of the centrifugal sudden (coupled states) approximation (SQM-CS). When this approximation is removed and the full close coupling treatment is used in the SQM model (SQM-CC), an almost perfect agreement is achieved. This shows that the SQCT is sensitive enough to show the relatively small inaccuracies resulting from the decoupling inherent to the CS approximation. In addition, the effect of ignoring the parity conservation is thoroughly examined. This effect is in general minor except in particular cases such as the DCS from initial rotational state j=0. It is shown, however, that in order to reproduce the sharp forward and backward peaks the conservation of parity has to be taken into account.     

Collision energy dependence of the O(1D) + HCl --> OH + Cl(2P) reaction studied by crossed beam scattering and quasiclassical trajectory calculations on ab initio potential energy surfaces

The dynamics of the O(1D) + HCl --> OH + Cl(2P) reaction are investigated by a crossed molecular beam ion-imaging method and quasiclassical trajectory calculations on the three ab initio potential energy surfaces, the ground 1(1)A' and two excited (1(1)A' and 2(1)A') states. The scattering experiment was carried out at collision energies of 4.2, 4.5, and 6.4 kcal/mol. The observed doubly differential cross sections (DCSs) for the Cl(2P) product exhibit almost no collision energy dependence over this inspected energy range. The nearly forward-backward symmetric DCS indicates that the reaction proceeds predominantly on the ground-state potential energy surface at these energies. Variation of the forward-backward asymmetry with collision energy is interpreted using an osculating complex model. Although the potential energy surfaces obtained by CASSCF-MRCI ab initio calculations exhibit relatively low potential barriers of 1.6 and 6.5 kcal/mol for 1(1)A' and 2(1)A', respectively, the dynamics calculations indicate that contributions of these excited states are small at the collision energies lower than 15.0 kcal/mol. Theoretical DCSs calculated for the ground-state reaction pathway agree well with the observed ones. These experimental and theoretical results suggest that the titled reaction at collision energies less than 6.5 kcal/mol is predominantly via the ground electronic state.     

Cross sections of the O+ + H2 --> OH+ + H ion-molecule reaction and isotopic variants (D2, HD): quasiclassical trajectory study and comparison with experiments

A dynamics study [cross section and microscopic mechanism versus collision energy (E(T))] of the reaction O+ + H2 --> OH+ + H, which plays an important role in Earth's ionosphere and interstellar chemistry, was conducted using the quasiclassical trajectory method, employing an analytical potential energy surface (PES) recently derived by our group [R. Martinez et al., J. Chem. Phys. 120, 4705 (2004)]. Experimental excitation functions for the title reaction, as well as its isotopic variants with D2 and HD, were near-quantitatively reproduced in the calculations in the very broad collision energy range explored (E(T) = 0.01-6.0 eV). Intramolecular and intermolecular isotopic effects were also examined, yielding data in good agreement with experimental results. The reaction occurs via two microscopic mechanisms (direct and nondirect abstraction). The results were satisfactorily interpreted based on the reaction probability and the maximum impact parameter dependences with E(T), and considering the influence of the collinear [OHH]+ absolute minimum of the PES on the evolution from reactants to products. The agreement between theory and experiment suggests that the reaction mainly occurs through the lowest energy PES and nonadiabatic processes are not very important in the wide collision energy range analyzed. Hence, the PES used to describe this reaction is suitable for both kinetics and dynamics studies.     

Dynamics of the C(1D)+D2 reaction: a comparison of crossed molecular-beam experiments with quasiclassical trajectory and accurate statistical calculations

In this paper we report a combined experimental and theoretical study on the dynamics of the insertion reaction C((1)D)+D(2) at 15.5 kJ mol(-1) collision energy. Product angular and velocity distributions have been obtained in crossed beam experiments and quasiclassical trajectory (QCT) and rigorous statistical calculations have been performed on the recent and accurate ab initio potential energy surface of Bussery-Honvault, Honvault, and Launay at the energy of the experiment. The molecular-beam results have been simulated using the theoretical calculations. Good agreement between experiment and both QCT and statistical predictions is found.     

Semiclassical nonadiabatic dynamics based on quantum trajectories for the O(3P,1D) + H2 system

The O(3P,1D) + H2 --> OH + H reaction is studied using trajectory dynamics within the approximate quantum potential approach. Calculations of the wave-packet reaction probabilities are performed for four coupled electronic states for total angular momentum J = 0 using a mixed coordinate/polar representation of the wave function. Semiclassical dynamics is based on a single set of trajectories evolving on an effective potential-energy surface and in the presence of the approximate quantum potential. Population functions associated with each trajectory are computed for each electronic state. The effective surface is a linear combination of the electronic states with the contributions of individual components defined by their time-dependent average populations. The wave-packet reaction probabilities are in good agreement with the quantum-mechanical results. Intersystem crossing is found to have negligible effect on reaction probabilities summed over final electronic states.     

Multiple channel dynamics in the O(1D) reaction with alkanes

In this article, we briefly review the recent experimental studies of the multiple channel dynamics of the O((1)D) reaction with alkane molecules using the significantly improved universal crossed molecular beam technique. In these reactions, the dominant reaction mechanism is found to be an O atom insertion into the C-H bond, while a direct abstraction mechanism is also present in the OH formation channel. While the reaction mechanism is similar for all of these reactions, the product channels are quite different because of the significantly different energetics of these reaction channels. In the O((1)D) reaction with methane, OH formation is the dominant process while H atom formation is also a significant process. In the O((1)D) reaction with ethane, however, the CH(3) + CH(2)OH is the most important process, OH formation is still significant and H atom formation is of minor importance. A new type of O atom insertion mechanism (insertion into a C-C bond) is also inferred from the O((1)D) reaction with cyclopropane. Through these comprehensive studies, complete dynamical pictures of many multiple channel chemical reactions could be obtained. Such detailed studies could provide a unique bridge between dynamics and kinetics research.     

Full-dimensional quantum dynamics study of exchange processes for the D + H2O and D + HOD reactions

The exchange processes of D + H(2)O and D + HOD reactions are studied using initial state-selected time-dependent wave packet approach in full dimension. The total reaction probabilities for different partial waves, together with the integral cross sections, are obtained both by the centrifugal sudden (CS) approximation and exact coupled-channel (CC) calculations, for the H(2)O(HOD) reactant initially in the ground rovibrational state. In the CC calculations, small resonance peaks in the reaction probabilities and quick diminishing of the resonance peaks with the increase of total angular momenta J do not lead to clear step-like features just above the threshold in the cross sections for the title reactions, which are different in other isotopically substituted reactions where the hydrogen atom was included as the reactant instead of the deuterium atom [B. Fu, Y. Zhou, and D. H. Zhang, Chem. Sci. 3, 270 (2012); B. Fu and D. H. Zhang, J. Phys. Chem. A 116, 820 (2012)]. It is interesting that the shape resonance-induced features resulting from the reaction tunneling are significantly diminished accordingly in the reactions of the deuterium atom and H(2)O or HOD, owing to the weaker tunneling capability of the reagent deuterium atom in the title reactions than the reagent hydrogen atom in other reactions. In the CS calculations, the resonance peaks persist in many partial waves but cannot survive the partial-wave summations. The cross sections for the D(') + H(2)O → D(')OH + H and D(') + HOD → D(')OD + H reactions are substantially larger than those for the D(') + HOD → HOD(') + D reaction, indicating that the D(')/H exchange reactions are much more favored than the D(')/D exchange.     

Anatomy of the S(1D) + H2 reaction: the dynamics on two new potential energy surfaces from quantum dynamics calculations

We present exact quantum integral and differential cross sections for the title reaction from a time-dependent wavepacket method which takes account of all Coriolis couplings. We employ two new potential energy surfaces fitted using the double many-body expansion (DMBE) method. The difference between the two surfaces is that for the first the data was extrapolated to the complete basis set limit (CBS) and for the second the data was corrected semi-empirically (SEC). While the DMBE/CBS surface is, on first impressions, regarded as the most accurate, our results show that this surface gives consistent smaller cross section when compared to previous results employing an earlier surface, named Ho after its first author. We also find that the DMBE/CBS surface features an unphysical barrier for contracted H(2) distances which explains the smaller results. The DMBE/SEC surface, which is based on the same data, does not show the same barrier and the results compare much better to previous theoretical results as well as those from experiment. While we find that overall the differential cross sections from the DMBE/SEC surface are forward scattered, which is in line with experiment, the cross sections do not rise steeply enough with decreasing energy showing that this surface is not sufficiently attractive at low energies. We find this is due to a shallow van der Waals well present for the Ho surface but not on the DMBE surfaces.     

ClO radical yields in the reaction of O(1D) with Cl2, HCl, chloromethanes, and chlorofluoromethanes

Absolute ClO radical product yields in the gas-phase reactions of O((1)D) with Cl(2), HCl, CCl(4), CHCl(3), CH(2)Cl(2), CH(3)Cl, CFCl(3), CF(2)Cl(2), CF(3)Cl, CHFCl(2), and CHF(2)Cl are reported. Product yields were measured using pulsed-laser photolysis of O(3) to produce O((1)D) in the presence of excess reactant combined with dual wavelength differential cavity ring-down spectroscopic detection of the ClO radical. ClO radical absorption cross sections for the A(2)Π(v = 10) ← X(2)Π(v = 0) transition band head near 280 nm were determined between 200 and 296 K as part of this work. The ClO product yields obtained at room temperature were Cl(2) (0.77 ± 0.10), HCl (0.20 ± 0.04), CCl(4) (0.79 ± 0.04), CHCl(3) (0.77 ± 0.04), CH(2)Cl(2) (0.73 ± 0.04), CH(3)Cl (0.46 ± 0.06), CFCl(3) (0.79 ± 0.04), CF(2)Cl(2) (0.76 ± 0.06), CF(3)Cl (0.82 ± 0.06), CHFCl(2) (0.73 ± 0.05), and CHF(2)Cl (0.56 ± 0.03), where the quoted error limits are 2σ of the measurement precision. ClO product yields in the O((1)D) + Cl(2) and CFCl(3) reactions were found to be independent of temperature between 200 and 296 K, within the precision of the measurements. The absolute ClO yields obtained in this study are compared with previously reported values determined using relative and indirect methods.     

Renner-Teller quantum dynamics of the N(2D) + H2-->NH + H reaction

We present the Born-Oppenheimer (BO) and Renner-Teller (RT) quantum dynamics of the reaction (14)N((2)D)+(1)H(2)(X (1)Sigma(g) (+))-->NH(X (3)Sigma(-))+H((2)S), considering the NH(2) electronic states X (2)B(1) and A (2)A(1). These states correlate to the same (2)Pi(u) linear species, are coupled by RT nonadiabatic effects, and give NH(X (3)Sigma(-))+H and NH(a (1)Delta)+H, respectively. We develop the Hamiltonian matrix elements in the R embedding of the Jacobi coordinates and in the adiabatic electronic representation, using the permutation-inversion symmetry, and taking into account the nuclear-spin statistics. Collision observables are calculated via the real wave-packet (WP) and flux methods, using the potential-energy surfaces of Santoro et al. [J. Phys. Chem. A 106, 8276 (2002)]. WP snapshots show that the reaction proceeds via an insertion mechanism, and that the RT-WP avoids the A (2)A(1) potential barrier, jumping from the excited to the ground surface and giving mainly the NH(X (3)Sigma(-)) products. X (2)B(1) BO probabilities and cross sections show large tunnel effects and are approximately four to ten times larger than the A (2)A(1) ones. This implies a BO rate-constant ratio k(X (2)B(1))k(A (2)A(1)) approximately 10(5) at 300 K, i.e., a negligible BO formation of NH(a (1)Delta). When H(2) is rotationally excited, RT couplings reduce slightly the X (2)B(1) reaction observables, but enhance strongly the A (2)A(1) reactivity. These couplings are important at all collision energies, reduce the collision threshold, and increase remarkably reaction probabilities and cross sections. The RT k(A (2)A(1)) is thus approximately 3.3 order of magnitude larger than the BO value, and degeneracy-averaged, initial-state-resolved rate constants increase by approximately 13% and by approximately 47% at 300 and 500 K, respectively. Owing to an overestimation of the X (2)B(1) potential barrier, the calculated thermal rate is too low with respect to that observed, but we obtain a good agreement by shifting down the calculated cross section.