Preparation, reactivity and controlled release of SAMs of calix[4,6]arenes and calix[6]arene-based rotaxanes and pseudorotaxanes formed on polycrystalline Cu

Specific and reversible binding of guest molecules from a solution to a surface pre-treated with host molecules is a recent and active field of research. Self-assembled monolayers may result from supramolecular interactions, adding distinct functionalities to the surface. In this frame, the first compared study is given here of the anchoring on the technologically relevant Cu surface of calix[4]arene receptors and calix[6]arene-based rotaxanes and pseudorotaxanes. These molecules, which belong to the most representative classes of compounds in supramolecular chemistry, have been chosen for their synthetic accessibility and versatility, which make them useful building blocks for the synthesis of new advanced supramolecular structures. Covalent functionalisation of calix[4,6]arenes on Cu was reached via a dip-coating procedure, optimizing the various synthetic aspects in order to obtain good coverages and copper passivation. Molecular adhesion has been demonstrated by the presence and relative quantitation of XPS signals from specific elements in the molecules. We have successfully tested the combination of different functionalities by producing a mixed film, prepared by ligand exchange of calix[4]arene with undecanethiol. The availability of the calix[4]arene cavity to reversibly host further species after anchoring on Cu has been demonstrated by a sequence of uptake and release cycles with pyridinium salts. Rotaxane and pseudorotaxane species, composed of a calix[6]arene wheel functionalized with N-phenylurea groups on the upper rim, and a viologen-containing axle, have been anchored on Cu via the SH-termination of the axle. XPS demonstrated the successful self-assembly of fully threaded rotaxanes and pseudorotaxanes from their solutions and the controlled release upon biasing of full rotaxanes and of the pseudorotaxane wheel.     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

Synthesis and self-assembly of thio derivatives of calix[4]arene on noble metal surfaces

Self-assembled monolayers (SAMs) provide a simple route to functionalize electrode surfaces with organic molecules. Herein we use cavity-containing derivatives of calix[4]arenes in SAMs. Bound to noble metal surface, the assembled molecules are candidates to serve as molecular sieves for H 2 molecules and H (+) ions, which could have relevance for fuel cell applications. Tetra- O-alkylated calix[4]arenes with thiolacetate and thiolamide wide-rim anchoring groups in cone and partial-cone conformations were designed, synthesized and self-assembled onto Au, Pt, and Pd surfaces. The resulting SAMs were systematically examined. Single crystal X-ray diffraction of 5,11,17,23-tetrakis(thioacetyl)-25,26,27,28-tetra- i-propoxycalix[4]arene confirmed the cone conformation and revealed the cavity dimensions of the SAMs that were formed by immersing noble metal substrates (Au, Pt and Pd deposited on Si-wafers) in solutions of calix[4]arenes. Surface characterization techniques including ellipsometry, cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) were used, indicating that the metal surface is terminated with a monomolecular layer. Experimental thicknesses obtained from the ellipsometry are consistent with the calculated values. CV results showed 50 to 80% physical passivation against the Fe(CN) 6 (3-/4-) couple, implying an overall relatively low concentration of defects and pinholes in the films. The binding energies of the S2p core level in the XPS were consistent with the literature values and revealed that up to 3.2 out of four anchoring groups were bonded to the noble metal surface.     

Synthesis of huge macrocycles using two calix[4]arenes as templates

Macrocycles with up to 100 atoms have been synthesised using two calix[4]arenes as templates: first, (3,5-dialkenyloxy)phenyl groups are attached to the wide rim of a calix[4]arene via urea links, then the alkenyl groups are connected via a metathesis reaction using a tetratosylurea calix[4]arene for their correct prearrangement and finally the urea functions are cleaved to detach the newly formed macrocycles.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

新型偶氮杯[4]芳烃的合成与构象研究

使用相应的w-硫醚羧酸酰氯与杯[4]芳烃或者偶氮杯[4]芳烃酰化合成了一类新型的杯[4]芳烃衍生物。分离得到六个新化合物4a-4c和5a-5c，并使用MALDI, EA, ¹H和¹³C NMR进行了表征。NMR图谱表明偶氮杯[4]芳烃衍生物 5a-5c均为1,3-转换构型，而4a-4c则均为锥式构型。对偶氮杯[4]芳烃衍生物5a-5c的红外和紫外性质也进行了研究。     

Synthesis of Macrocyclic Lactones Building on Double Calix[4]arenes

Naturalmacrocycliclactonesandlactamsastheionophoreshaveabsorbedextensiveinterestsbecauseoftheirveryhighselectiverecognitionforalkalimetals.rorexample,nactinslandvalinomycin'havethehighestselectivityforpotassiumamongalltheionopohores.Artificialmacrocycliclactonesalsoshowedselectivityforcanons,althoughthebindingstrengthwaslowerthanthatofcommoncrownethers3.Calixareneswereaveryimportantkindofartificialreceptors,whosederivativeshaveshowedthehighestselectivityforNa ,K andCs amongthesynthesizedmacro…     

Facile synthesis of oligophenylene-substituted calix[4]arenes and their enhanced binding properties

[reaction: see text] A facile and efficient protocol for the synthesis of oligophenylene OPP(n)-substituted calix[4]arenes (with n up to 4) via iodo-substituted oligoarylcalix[4]arenes has been developed. The cooperation effect of the proximate fluoroionophores in hexylsulfanyl end-capped OPP(n)-substituted calix[4]arene assemblies leads to metal ion binding enhancement.     

Synthetic cation transporters incorporating crown ethers and calixarenes as headgroups and central relays: a comparison of sodium and chloride selectivity

An earlier study showed that a calix[4]arene could function as a central relay unit to form an ion conductance pathway through a phospholipid bilayer membrane. The present study expands the range of compounds from calix[4]arene to calix[6]arene and incorporates them either as central units or as headgroups, substituting one or more diaza-18-crown-6 residues in functioning hydraphiles. Ion release was assayed by detecting either Na(+) or Cl(-) release from phospholipid vesicles. The ion transport activity for calix[4]arenes in either position is modest, but is almost non-existent when calix[6] residues were incorporated either as head groups or central relay units. The poor activity of the calix[6]arenes may result from an inability to penetrate to the midplane of the bilayer or pass entirely through it to form a conductance pathway. The transmembrane "flip-flop" may result from high polarity or steric bulk, or both. A hydraphile incorporating a single -NHCOC(6)H(4)OCH(2)CONH- as a central relay proved to be an excellent Na(+) conductor, but less selective for Cl(-). The fact that this new hydraphile molecule shows selectivity for Na (+) over Cl(-) transport and possesses two secondary amide residues in the central relay suggests a means to control ion selectivity in synthetic ion transporters.     

Fourfold tetraurea calix[4]arenes--potential cores for the formation of self-assembled dendrimers

Wide rim tetraurea calix[4]arenes monofunctionalized at the narrow rim by COOH or NH2 have been synthesized in five steps from t-butylcalix[4]arene tripropylether. Their covalent linkage via the narrow rim to a central calix[4]arene fixed in the 1,3-alternate conformation led to pentacalix[4]arenes 9 bearing four tetraurea derivatives in the cone conformation in a flexible tetrahedral arrangement. Their self-assembly via the formation of hydrogen bonded dimeric capsules has been studied under different conditions. A fourfold heterodimerisation of tetrakis-tetraurea derivatives of type 9 with tetratosylurea 10 has been confirmed by 1H NMR-spectroscopy and dynamic light scattering.     

Energies of charge transfer and supramolecular interactions of some mono O-substituted calix[6]arenes with [60]fullerene by absorption spectrometric method

Equilibria for the formation of supramolecular complexes of [60]fullerene with a series of mono O-substituted calix[6]arenes, namely: (i) 37-methoxy-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (1), (ii) 37-allyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2), (iii) 37-phenacyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (3), (iv) 37-ethylester-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (4) and (v) 37-benzyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (5) have been studied in CCl4 medium by absorption spectroscopic technique. The stoichiometry has been found to be 1:1 ([60]fullerene:calix[6]arene) in each case. An absorption band due to charge transfer (CT) transition is observed in each case in the visible region. The vertical ionisation potentials (I(D)(v)) of all the calix[6]arenes under study have been estimated utilising CT transition energy. The experimental I(D)(v) values also yield a good estimate of the electron affinity of [60]fullerene. The degrees of CT in the ground state of the complexes have been found to be very low (about 0.15%). Resonance energy of the complexes have been estimated. Thermodynamic parameters for the supramolecular complex formation of [60]fullerene with mono O-substituted calix[6]arene receptors are reported. It is observed that among the calix[6]arenes under the present study, only 1 and 4 form inclusion complexes with [60]fullerene. This has also been substantiated by theoretical calculation using PM3 method. Thus presence of one substituent group (of different types) on the lower rim of the calix[6]arene molecule has been shown to govern the host-guest complexation process.     

Synthesis and reactivity of functionalized bridged m-xylylenedioxycalix[6]arenes

The synthesis of A,D-m-xylylene-bridged calix[6]arenes 1-8 functionalized at position 5 of the spacer arm is described. The cone conformation of the new bridged calix[6]arenes has been established by (1)H and (13)C NMR. The X-ray structure of compound 6 confirmed the cone conformation also in the solid state. Compounds 9 and 10, which are branched-like structures, were obtained by reductive amination of 5-amino-A,D-m-xylylene-bridged-B,C,E,F-tetra-O-ethylcalix[6]arene 7 with diformyl calix[4]arene and CTV derivatives 22 and 24, respectively.     

Bridge-disubstituted calix[4]arenes obtained via a new preparative route. Synthesis and structural study

A series of calix[4]arenes bearing various substituents including alkyl, p-bromobenzyl, carboxy and allyl at opposite methylene bridges has been synthesized via successive metallation followed by nucleophilic substitution. In a first step, mono-lithiated calix[4]arenes react with terminal bromoalkanes to give 2-alkylated calix[4]arenes or with CO₂ the respective calixarene-2-carboxylic acid in good yields. A second lithiation step of the monosubstituted products with subsequent attachment of both polar and non-polar substituents yields several new diametrally bridge-disubstituted calix[4]arenes. 2D-NMR measurements establish the disubstituted calixarenes to predominantly adopt the 1,2-alternate conformation in solution. First examples of X-ray crystal structures of the new type of disubstituted calix[4]arenes are described featuring the calix[4]arene also in the rare 1,2-alternate conformation.     

Anion-templated calix[4]arene-based pseudorotaxanes and catenanes

We present the rational design and anion-binding properties of the first anion-templated pseudorotaxanes and catenanes in which the "wheel" component is provided by a calix[4]arene macrobicyclic unit. The designs and syntheses of two new calix[4]arene macrobicycles, 2 and 3, are presented, and the abilities of these new species both to bind anions and to undergo anion-dependent pseudorotaxane formation are demonstrated. Furthermore, it is shown that performing ring-closing metathesis reactions on some of these pseudorotaxane assemblies gives novel catenane species 14 and 15, in which the yield of interlocked molecule obtained is critically dependent on the presence of a suitable anion template, namely, chloride. Exchange of the chloride anion in catenane 14 a for hexafluorophosphate gives catenane 14 d, which contains a unique anion-binding domain defined by the permanently interlocked hydrogen-bond-donating calix[4]arene macrobicycle and pyridinium macrocycle fragments. The anion-binding properties of this domain are presented, and shown to differ from non-interlocked components.     

Transition metal-directed self-assembly of calix[4]arene based dithiocarbamate ligands

The transition metal-directed self-assembly of dithiocarbamate ligand functionalized upper and lower rim calix[4]arenes affords novel dimeric bimetallic bis(calix[4]arene) species as determined by a combination of analytical methods including X-ray crystallography. An exception is a zinc(II) dithiocarbamate upper rim calix[4]arene assembly which is monomeric in nature. Electrochemical investigations reveal the bimetallic copper(II) bis(calix[4]arene) systems can electrochemically sense dihydrogen phosphate and carboxylate anions via significant cathodic perturbations of the respective copper(II)/(III) dithiocarbamate oxidation wave.     

Shaping the cavity of calixarene architecture for molecular recognition: synthesis and conformational properties of new azocalix[4]arenes

A series of new azocalix[4]arenes containing one, two, three, and four free phenolic groups have been synthesized through the reaction of 4-nitro- and 2,4-dinitrophenylhydrazines with flexible calix[4]arene diquinones as well as through diazocoupling reactions of calix[4]arenes. Characterization of synthesized compounds by spectroscopic methods and X-ray diffraction revealed that azocalix[4]arenes adopt a cone conformation if they contain at least one free phenolic group. Partial cone or 1,3-alternate conformers of azocalix[4]arenes result only when they are devoid of free phenolic groups. The results can be utilized to shape calix[4]arene architecture for ionic and molecular recognition.     

Synthesis of calix[4]arene-based polycarboxylate ligands and their chemical immobilization onto controlled-pore glass

Three new calix[4]arene-based carboxylate ligands with an appended allyl function have been synthesized, chemically immobilized onto a controlled-pore glass (CPG), and the extracting ability of selected materials towards Sr²⁺ in solid-liquid extraction was examined. The calixarenes were characterized by elemental analysis, mass spectrometry, IR and NMR spectroscopy, and where appropriate by X-ray crystallography. Four functionalized CPGs were prepared by radical thiol addition of the corresponding 5-allylcalix[4]arenes to γ-mercaptopropyl-modified CPG. Analysis by ¹³C and ²⁹Si cross polarization/magic angle spinning (CP/MAS) NMR spectroscopy clearly showed the covalent fixation of the calix[4]arenes to CPG. The calix[4]arene phases were found to be stable up to 200 °C by simultaneous thermal analysis (STA). The extraction performance of the modified CPGs towards Sr²⁺ were found to be superior over the unmodified CPGs as demonstrated by radiotracing using the short-lived radio nuclide ⁸⁵Sr.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

上端含长链烷基的手性杯[4]芳烃合成

脱叔丁基的杯[4]芳烃与长链的叔醇或者叔氯代烷烃进行傅-克反应, 在其上端引入长链烷基. 然后在下端引入光学活性的1-苯基乙胺基团, 得到了一系列上端含长链烷基的手性杯[4]芳烃.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.