New polymer materials with controlled nanoporous structure based on N-vinylpyrrolidone

The polymer networks with nanoporous structure were obtained by the crosslinking free-radical copolymerization of N-vinylpyrrolidone with triethylene glycol dimethacrylate in bulk in the presence of amphiphilic copolymer and its fractions as templates. The templating agents consisted of copolymer or their fragments with similar monomer units and different molecular weight. Macromolecular templates were shown to be removed from the polymer composite by PrⁱOH leaving the pores. The values of the specific surface areas, the total pore volumes, pore size, and pore size distribution were measured by the method of low-temperature nitrogen absorption. The maximum value of the specific surface area was calculated to be ~26 m² g^–1. The value was significantly higher than that for the usual copolymer network. The relationship between specific surface area, parameters of pores, and macromolecular structure of template has been established. It is shown by Brunauer—Emmett—Teller method that the macromolecules having a branched architecture are more effective for the preparation of the polymer network with more developed specific surface area and narrow pore size distribution.

     

Gas storage in nanoporous materials

Gas storage in solids is becoming an ever more important technology, with applications and potential applications ranging from energy and the environment all the way to biology and medicine. Very highly porous materials, such as zeolites, carbon materials, polymers, and metal-organic frameworks, offer a wide variety of chemical composition and structural architectures that are suitable for the adsorption and storage of many different gases, including hydrogen, methane, nitric oxide, and carbon dioxide. However, the challenges associated with designing materials to have sufficient adsorption capacity, controllable delivery rates, suitable lifetimes, and recharging characteristics are not trivial in many instances. The different chemistry associated with the various gases of interest makes it necessary to carefully match the properties of the porous material to the required application.     

Microwave synthesis of nanoporous materials.

Studies in the last decade suggest that microwave energy may have a unique ability to influence chemical processes. These include chemical and materials syntheses as well as separations. Specifically, recent studies have documented a significantly reduced time for fabricating zeolites, mixed oxide and mesoporous molecular sieves by employing microwave energy. In many cases, microwave syntheses have proven to synthesize new nanoporous structures. By reducing the times by over an order of magnitude, continuous production would be possible to replace batch synthesis. This lowering of the cost would make more nanoporous materials readily available for many chemical, environmental, and biological applications. Further, microwave syntheses have often proven to create more uniform (defect-free) products than from conventional hydrothermal synthesis. However, the mechanism and engineering for the enhanced rates of syntheses are unknown. We review the many studies that have demonstrated the enhanced syntheses of nanoporous oxides and analyze the proposals to explain differences in microwave reactions. Finally, the microwave reactor engineering is discussed, as it explains the discrepancies between many microwave studies.     

Ligand-to-metal ratio controlled assembly of nanoporous metal-organic frameworks

Two bilayered metal-organic frameworks with nanoporous channels were synthesized at different ligand-to-metal ratios, which demonstrated an interesting crystal-to-crystal transformation property and a special fluorescent response to the different guest molecules included.     

Tailoring nanoporous materials by atomic layer deposition

Atomic layer deposition (ALD) is a cyclic process which relies on sequential self-terminating reactions between gas phase precursor molecules and a solid surface. The self-limiting nature of the chemical reactions ensures precise film thickness control and excellent step coverage, even on 3D structures with large aspect ratios. At present, ALD is mainly used in the microelectronics industry, e.g. for growing gate oxides. The excellent conformality that can be achieved with ALD also renders it a promising candidate for coating porous structures, e.g. for functionalization of large surface area substrates for catalysis, fuel cells, batteries, supercapacitors, filtration devices, sensors, membranes etc. This tutorial review focuses on the application of ALD for catalyst design. Examples are discussed where ALD of TiO(2) is used for tailoring the interior surface of nanoporous films with pore sizes of 4-6 nm, resulting in photocatalytic activity. In still narrower pores, the ability to deposit chemical elements can be exploited to generate catalytic sites. In zeolites, ALD of aluminium species enables the generation of acid catalytic activity.     

UV-prepared salep-based nanoporous hydrogel for controlled release of tetracycline hydrochloride in colon

A highly swelling nanoporous hydrogel (NPH) was synthesized via UV-irradiation graft copolymerization of acrylic acid (AA) onto salep backbone and its application as a carrier matrix for colonic delivery of tetracycline hydrochloride (TH) was investigated. Optimized synthesis of the hydrogel was performed by the classic method. The swelling behavior of optimum hydrogel was measured in different media. The hydrogel formation was confirmed by Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA/DTG/DTA). The study of the surface morphology of hydrogels using SEM showed a nanoporous (average pore size: about 350nm) structure for the sample obtained under optimized conditions. The drug delivery results demonstrated that this NPH could successfully deliver a drug to the colon without losing the drug in the stomach, and could be a good candidate as an orally administrated drug delivery system.     

Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures

A sound understanding of any sorption system requires an accurate determination of the enthalpy of adsorption. This is a fundamental thermodynamic quantity that can be determined from experimental sorption data and its correct calculation is extremely important for heat management in adsorptive gas storage applications. It is especially relevant for hydrogen storage, where porous adsorptive storage is regarded as a competing alternative to more mature storage methods such as liquid hydrogen and compressed gas. Among the most common methods to calculate isosteric enthalpies in the literature are the virial equation and the Clausius–Clapeyron equation. Both methods have drawbacks, for example, the arbitrary number of terms in the virial equation and the assumption of ideal gas behaviour in the Clausius–Clapeyron equation. Although some researchers have calculated isosteric enthalpies of adsorption using excess amounts adsorbed, it is arguably more relevant to applications and may also be more thermodynamically consistent to use absolute amounts adsorbed, since the Gibbs excess is a partition, not a thermodynamic phase. In this paper the isosteric enthalpies of adsorption are calculated using the virial, Clausius–Clapeyron and Clapeyron equations from hydrogen sorption data for two materials—activated carbon AX-21 and metal-organic framework MIL-101. It is shown for these two example materials that the Clausius–Clapeyron equation can only be used at low coverage, since hydrogen’s behaviour deviates from ideal at high pressures. The use of the virial equation for isosteric enthalpies is shown to require care, since it is highly dependent on selecting an appropriate number of parameters. A systematic study on the use of different parameters for the virial was performed and it was shown that, for the AX-21 case, the Clausius–Clapeyron seems to give better approximations to the exact isosteric enthalpies calculated using the Clapeyron equation than the virial equation with 10 variable parameters.     

Electrochemically controlled release based on nanoporous conducting polymers

An electrochemically controlled drug release system based on nanoporous polypyrrole (PPy) films was developed. Pyrrole and a model drug, fluorescein, were electrochemically copolymerized on glassy carbon (GC) electrodes modified with self-assembled multilayer polystyrene (PS) nanobeads, and PPy films incorporated with fluorescein as dopants were formed among the interstitial spaces of the tightly packed PS nanobead template. After the removal of the PS hard template, nanoporous PPy films incorporated with the drug fluorescein were obtained. Due to the porous morphology and huge surface area, the efficiency of the prepared PPy films in electrochemically releasing incorporated fluorescein was about nine times higher than that of conventional PPy films.     

Fabrication of lotus-leaf-like nanoporous silica flakes with controlled thickness

Lotus-leaf-like silica flakes with a three-dimensionally (3D) connected nanoporous structure and controllable thickness have been facilely synthesized; the flakes produced exhibited superior performance in adsorbing enzymes to their microspheric analogues.     

Advanced functional properties in nanoporous coordination framework materials

Coordination framework materials display a rich array of host-guest properties and are notable amongst porous media for their extreme chemical versatility. This article highlights a number of areas where specific function has been incorporated into these framework host lattices.     

Application of microimaging to diffusion studies in nanoporous materials

Adsorption - Microimaging on the basis of, respectively, interference microscopy and IR microscopy permit the observation of the distribution of guest molecules in nanoporous solids and their...     

Physical adsorption characterization of nanoporous materials: progress and challenges

Within the last two decades major progress has been achieved in understanding the adsorption and phase behavior of fluids in ordered nanoporous materials and in the development of advanced approaches based on statistical mechanics such as molecular simulation and density functional theory (DFT) of inhomogeneous fluids. This progress, coupled with the availability of high resolution experimental procedures for the adsorption of various subcritical fluids, has led to advances in the structural characterization by physical adsorption. It was demonstrated that the application of DFT based methods on high resolution experimental adsorption isotherms provides a much more accurate and comprehensive pore size analysis compared to classical, macroscopic methods. This article discusses important aspects of major underlying mechanisms associated with adsorption, pore condensation and hysteresis behavior in nanoporous solids. We discuss selected examples of state-of-the-art pore size characterization and also reflect briefly on the existing challenges in physical adsorption characterization.     

Control of porosity geometry in amino acid derived nanoporous materials

Substitution of the pillaring ligand in the homochiral open-framework [Ni(2)(L-asp)(2)(bipy)] by extended bipy-type ligands leads to a family of layer-structured, homochiral metal-organic frameworks. The 1D channel topology can be modified by the nature of the organic linker, with shape, cross-section and the chemical functionality tuneable. In addition, the volume of these channels can be increased by up to 36 % compared to the parent [Ni(2)(L-asp)(2)(bipy)]. The linker 1,4-dipyridylbenzene (3rbp) gives access to a new layered homochiral framework [Ni(2)(L-asp)(2)(3rbp)] with channels of a different shape. In specific cases, non-porous analogues with the linker also present as a guest can be activated to give porous materials after sublimation. Their CO(2) uptake shows an increase of up to 30 % with respect to the parent [Ni(2)(L-asp)(2)(bipy)] framework.     

ToF‐SIMS studies of nanoporous PMSSQ materials: kinetics and reactions in the processing of low‐K dielectrics for ULSI applications

Detailed investigations of spin‐on polymethylsilsesquioxane (PMSSQ)‐based low‐K materials were carried out by means of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) to identify the reaction kinetics and mechanisms occurring during the manufacturing of nanoporous dielectrics for ULSI applications. Analysis of the static SIMS fingerprints led to the identification of key species related to the PMSSQ oligomers, as well to the observation of features related to the initial functionality of the precursor materials. The intensity variations of the key species with thermal curing reveal the polymerization kinetics of the dielectric precursors. In addition, thermal decomposition and volatilization of the polymethylmethacrylate–dimethylaminoethylmethacrylate copolymer (PMMA‐co‐DMAEMA) porogen was established based on the detection of fragments related to the different moieties of the copolymer molecule. Porogen degradation takes place via cleavage of the DMAEMA co‐monomer at low temperature, followed by volatilization of the residual PMMA‐enriched polymer upon annealing at higher temperature. Several complementary phenomena occurring during the formation of these complex systems can be evaluated by ToF‐SIMS, revealing major features crucial to materials development and the manufacturing of novel low‐dielectric‐constant (K) dielectrics. Copyright © 2004 John Wiley & Sons, Ltd.     

Loading dependence of the diffusion coefficient of methane in nanoporous materials

In this work, we use molecular simulations to study the loading dependence of the self-and collective diffusion coefficients of methane in various zeolite structures. To arrive at a microscopic interpretation of the loading dependence, we interpret the diffusion behavior in terms of hopping rates over a free-energy barrier. These free-energy barriers are computed directly from a molecular simulation. We show that these free-energy profiles are a convenient starting point to explain a particular loading dependence of the diffusion coefficient. On the basis of these observations, we present a classification of zeolite structures for the diffusion of methane as a function of loading: three-dimensional cagelike structures, one-dimensional channels, and intersecting channels. Structures in each of these classes have their loading dependence of the free-energy profiles in common. An important conclusion of this work is that diffusion in nanoporous materials can never be described by one single effect so that we need to distinguish different loading regimes to describe the diffusion over the entire loading range.     

Hydrogen storage in nanoporous carbon materials: myth and facts

We used Grand canonical Monte Carlo simulation to model the hydrogen storage in the primitive, gyroid, diamond, and quasi-periodic icosahedral nanoporous carbon materials and in carbon nanotubes. We found that none of the investigated nanoporous carbon materials satisfy the US Department of Energy goal of volumetric density and mass storage for automotive application (6 wt% and 45 kg H(2) m(-3)) at considered storage condition. Our calculations indicate that quasi-periodic icosahedral nanoporous carbon material can reach the 6 wt% at 3.8 MPa and 77 K, but the volumetric density does not exceed 24 kg H(2) m(-3). The bundle of single-walled carbon nanotubes can store only up to 4.5 wt%, but with high volumetric density of 42 kg H(2) m(-3). All investigated nanoporous carbon materials are not effective against compression above 20 MPa at 77 K because the adsorbed density approaches the density of the bulk fluid. It follows from this work that geometry of carbon surfaces can enhance the storage capacity only to a limited extent. Only a combination of the most effective structure with appropriate additives (metals) can provide an efficient storage medium for hydrogen in the quest for a source of "clean" energy.     

Osmotic ensemble methods for predicting adsorption-induced structural transitions in nanoporous materials using molecular simulations

Osmotic framework adsorbed solution theory is a useful molecular simulation method to predict the evolution of structural transitions upon adsorption of guest molecules in flexible nanoporous solids. One challenge with previous uses of this approach has been the estimation of free energy differences between the solid phases of interest in the absence of adsorbed molecules. Here we demonstrate that these free energy differences can be calculated without reference to experimental data via the vibrational density of states of each phase, a quantity that can be obtained from molecular dynamics simulations. We show the applicability of this method through case studies of the swelling behaviors of two representative systems in which swelling upon adsorption of water is of importance: single-walled aluminosilicate nanotube bundles and cesium montmorillonite. The resulting predictions show that the aluminosilicate nanotube bundles swell significantly with increasing interstitial adsorption and that the layer spacing of cesium montmorillonite expands up to about 12.5 A?, giving good agreement with experiments. The method is applicable to a wide range of flexible nanoporous materials, such as zeolites, metal-organic frameworks, and layered oxide materials, when candidate structures can be defined and a force field to describe the material is available.     

Functionalized mesoporous silica materials for controlled drug delivery

In the past decade, non-invasive and biocompatible mesoporous silica materials as efficient drug delivery systems have attracted special attention. Great progress in structure control and functionalization (magnetism and luminescence) design has been achieved for biotechnological and biomedical applications. This review highlights the most recent research progress on silica-based controlled drug delivery systems, including: (i) pure mesoporous silica sustained-release systems, (ii) magnetism and/or luminescence functionalized mesoporous silica systems which integrate targeting and tracking abilities of drug molecules, and (iii) stimuli-responsive controlled release systems which are able to respond to environmental changes, such as pH, redox potential, temperature, photoirradiation, and biomolecules. Although encouraging and potential developments have been achieved, design and mass production of novel multifunctional carriers, some practical biological application, such as biodistribution, the acute and chronic toxicities, long-term stability, circulation properties and targeting efficacy in vivo are still challenging.     

Chemistry in confining reaction fields with special emphasis on nanoporous materials

The everyday routine of most chemists is dictated by large numbers. The chemical rules for ensembles of molar size (N approximately N(A)=6.022 x 10(23)) are well known and can be understood in most cases by using Boltzmann distribution. It is an interesting question how a small ensemble of a chemical system behaves and if it differs from the respective large-ensemble counterpart. The experimental approach presented in the current paper involves the division of a macroscopic volume into compartments that contain only a small number of reactants. The compartments represent the pores of tailor-made nanoporous materials.