Thermoelectric properties of homogeneously and non-homogeneously doped CdTe15/16M1/16 (M=N,P, As,Sb) and Cd15/16TeM1/16 (M=Na,K, Rb,Cs)

The electrical transport properties of p-doped semiconductors CdTe_15/16M_1/16 (M=N, P, As, Sb) and Cd_15/16TeM_1/16 (M=Na, K, Rb, Cs) with two configurations are investigated through first-principles calculations combined with Boltzmann transport theory under the relaxation time approximation. It is found that N and Cs atoms in the homogeneous structure induce much sharper electron densities of states (DOSs) and flatter energy bands at the valence band edges than the rest of doped elements, resulting in much larger Seebeck coefficients. The calculations reveal that most of the Seebeck coefficients and electrical conductivities are impacted unfavorably by the conglomeration of impurity atoms considered. Though the power factors for homogeneous doping of N and Cs are comparatively smaller, the electronic figures of merit are much larger at 800–1000 K than the rest ones due to much smaller electronic thermal conductivities, therefore probably enhancing the thermoelectric figures of merit. The results show that doping the elements with electronegativities distinct from the host atoms can enhance the Seebeck coefficients and the thermoelectric performances of bulk semiconductors efficiently if the energy levels of doped atoms resonate with those of host atoms and the arrangement of doped atoms is modulated appropriately to avoid deteriorating the sharpness of the DOS (or transport distribution).     

Electronic, magnetic and transport properties of Co2TiZ (Z=Si, Ge and Sn): A first-principle study

We have studied the electronic structure, magnetic and transport properties of some Co based full Heusler alloys, namely Co₂TiZ (Z=Si, Ge and Sn), in the frame work of first-principle calculations. The calculations show that Co₂TiZ (X=Si, Ge and Sn) are to be half-metallic compounds with a magnetic moment of 2 μ_B, well consistent with the Slater-Pauling rule. The electronic structure results reveal that Co₂TiZ has the high density of states at the Fermi energy in the majority-spin state and show 100% spin polarization. Our results also suggest that both the electronic and magnetic properties in these compounds are intrinsically related to the appearance of the minority-spin gap. The origin of energy gap in the minority-spin states is discussed in terms of the electron splitting of Z (Z=Si, Ge and Sn) and 3d Co atoms and also the d-d hybridization between the Co and Ti atoms. The transport properties of these materials are discussed on the basis of Seebeck coefficients, electrical conductivity coefficients and thermal conductivity coefficients.     

Dopant-induced nanoscale electronic inhomogeneities in Ca(2-x)Sr(x)RuO4

Ca(2-x)Sr(x)RuO4 single crystals with 0.1 < or = x < or = 2.0 have been studied systematically using scanning tunneling microscopy (STM) and spectroscopy, low-energy electron diffraction, and angle resolved photoelectron spectroscopy (ARPES). In contrast with the well-ordered lattice structure, the local density of states at the surface clearly shows a strong doping dependent nanoscale electronic inhomogeneity, regardless of the fact of isovalent substitution. Remarkably, the surface electronic roughness measured by STM and the inverse spectral weight of quasiparticle states determined by ARPES are found to vary with x in the same manner as the bulk in-plane residual resistivity, following the Nordheim rule. For the first time, the surface measurements--especially those with STM--are shown to be in good agreement with the bulk transport results, all clearly indicating a doping-induced electronic disorder in the system.     

The spin-dependent electronic transport properties of M(dcdmp)2 (M = Cu,Au, Co,Ni) molecular devices based on zigzag graphene nanoribbon electrodes

The spin-dependent electronic transport properties of M(dcdmp)₂ (M = Cu, Au, Co, Ni; dcdmp = 2,3-dicyano-5,6-dimercaptopyrazyne) molecular devices based on zigzag graphene nanoribbon (ZGNR) electrodes were investigated by density functional theory combined nonequilibrium Green's function method (DFT-NEGF). Our results show that the spin-dependent transport properties of the M(dcdmp)₂ molecular devices can be controlled by the spin configurations of the ZGNR electrodes, and the central 3d-transition metal atom can introduce a larger magnetism than that of the nonferrous metal one. Moreover, the perfect spin filtering effect, negative differential resistance, rectifying effect and magnetic resistance phenomena can be observed in our proposed M(dcdmp)₂ molecular devices.     

Spin dependent electronic transport properties of zigzag black phosphorene nanojunctions induced by H,Li, O,Co asymmetric edge saturations

Two-dimensional (2D) material of few-layer black phosphorus (BP) has recently attracted extensive interest owing to its tunable band gap and high carrier mobility. We investigate the electronic transport properties of zigzag black phosphorene nanoribbons (ZBPNRs) with asymmetric H, Li, O and Co edge saturations by employing the density functional theory in combination with the non-equilibrium Green's function. The computational results forecast that different types of saturated atoms at both edge of ribbons mainly contribute to the electronic transport properties of molecular junctions. The metal edge saturation of Co atom is used to the one edge of ZBPNR which can induce an identical electronic transport property. Interestingly, the negative differential resistance (NDR) phenomena can be observed in our proposed ZBPNR junctions with an analysis of internal physical mechanism. Our theoretical results could support the possibility of potential applications to design 2D electronic devices based on the material of BP in future.     

(Pressure,temperature) phase diagram of the quasi-1D 3/4 filled organic salt (o-DMTTF)2Br

The family of quasi-one-dimensional organic salts (o-DMTTF)₂X, (X=Cl, Br, I) exhibits regular stacks and a high symmetry (tetragonal) structure which provides a perfect 3/4 band filling system with strong electronic correlations. We report transport measurements, resistivity and thermopower, performed as a function of pressure and/or temperature on (o-DMTTF)₂Br which presents all the characteristics of the family. Coupled with data obtained from X-rays diffraction and magnetic susceptibility experiments at ambient pressure, in order to identify the insulating ground states, our data allowed to establish the (pressure, temperature) phase diagram for (o-DMTTF)₂Br which differs significantly from those previously reported in other 3/4 filled systems.     

Current–Voltage Characteristics of the Aziridine-Based Nano-Molecular Wires: a Light-Driven Molecular Switch

Using nonequilibrium Green's function formalism combined first-principles density functional theory, we analyze the transport properties of a 4,4-dimethyl-6-(4-nitrophenyl)-2-phenyl-3,5-diaza-bicyclo[3.1.0]hex-2-ene molecular optical switch. The title molecule can convert between closed and open forms by visible or ultraviolet irradiation. The I-V characteristics, differential conductance, on-off ratio, electronic transmission coefficients, spatial distribution of molecular projected self-consistent Hamiltonian orbitals, HOMO-LUMO gaps, effect of electrode materials Y(111)(Y =Au, Ag and Pt) on electronic transport and different molecular geometries corresponding to the closed and open forms through the molecular device are discussed in detail. Based on the results, as soon as possible the open form translates to the closed form, and there is a switch from the ON state to the OFF state(low resistance switches to high resistance). Theoretical results show that the donor/acceptor substituent plays an important role in the electronic transport of molecular devices. The switching performance can be improved to some extent through suitable donor and acceptor substituents.     

Kinetic parameters,collision rates,energy exchanges and transport coefficients of non-thermal electrons in premixed flames at sub-breakdown electric field strengths

The effects of an electric field on the collision rates, energy exchanges and transport properties of electrons in premixed flames are investigated via solutions to the Boltzmann kinetic equation. The case of high electric field strength, which results in high-energy, non-thermal electrons, is analysed in detail at sub-breakdown conditions. The rates of inelastic collisions and the energy exchange between electrons and neutrals in the reaction zone of the flame are characterised quantitatively. The analysis includes attachment, ionisation, impact dissociation, and vibrational and electronic excitation processes. Our results suggest that Townsend breakdown occurs for E/N = 140 Td. Vibrational excitation is the dominant process up to breakdown, despite important rates of electronic excitation of CO, CO₂ and N₂ as well as impact dissociation of O₂ being apparent from 50 Td onwards. Ohmic heating in the reaction zone is found to be negligible (less than 2% of peak heat release rate) up to breakdown field strengths for realistic electron densities equal to 10¹⁰ cm^?3. The observed trends are largely independent of equivalence ratio. In the non-thermal regime, electron transport coefficients are insensitive to mixture composition and approximately constant across the flame, but are highly dependent on the electric field strength. In the thermal limit, kinetic parameters and transport coefficients vary substantially across the flame due to the spatially inhomogeneous concentration of water vapour. A practical approach for identifying the plasma regime (thermal versus non-thermal) in studies of electric field effects on flames is proposed.     

Transport and structural properties of polymerized AC60 (A = K, Rb) under zero and high pressure conditions

60 display transport properties vastly different from their unpolymerized counterparts. We here describe structural (X-ray diffraction and transmission electron microscopy) and dc resistivity measurements of polymerized AC₆₀ (A = K, Rb) at zero and high pressures. The structural and electronic properties are rich, and evidence is found for unusual phase transitions in both materials. Received: 28 October 1996/Accepted: 13 December 1996     

Electronic structure and transport measurements of amorphous transition-metal oxides: observation of Fermi glass behavior

We characterized the conduction mechanisms in thin sputtered films of three representative binary Me–O (Me=Ta, W, and Nb) systems as a function of oxygen content, by combining in situ chemical state and electronic band structure studies from X-ray photoemission with temperature-dependent transport measurements. Despite certain differences, these amorphous films all displayed Fermi glass behavior following an oxidation-induced transition from metallic to hopping conduction, down to a sub-percolation threshold. The electron localization estimated from the band structure was in good agreement with that from the transport measurements, and the two were used to construct phase diagrams of conduction in the degree of oxidation-conductivity coordinates, which should prove important in the design of resistive switching and other electronic devices.     

Effect of Chemical Doping on the Electronic Transport Properties of Tailoring Graphene Nanoribbons

The electronic transport properties of a molecular junction based on doping tailoring armchair-type graphene nanoribbons(AGNRs)with different widths are investigated by applying the non-equilibrium Green's function formalism combined with first-principles density functional theory.The calculated results show that the width and doping play significant roles in the electronic transport properties of the molecular junction.A higher current can be obtained for the molecular junctions with the tailoring AGNRs with W=11.Furthermore,the current of boron-doped tailoring AGNRs with widths W=7 is nearly four times larger than that of the undoped one,which can be potentially useful for the design of high performance electronic devices.     

Thermoelectric performance of XI2 (X = Ge,Sn, Pb) bilayers

We study the thermal and electronic transport properties as well as the thermoelectric (TE) performance of three two-dimensional (2D) XI₂ (X=Ge, Sn, Pb) bilayers using density functional theory and Boltzmann transport theory. We compared the lattice thermal conductivity, electrical conductivity, Seebeck coefficient, and dimensionless figure of merit (ZT) for the XI₂ monolayers and bilayers. Our results show that the lattice thermal conductivity at room temperature for the bilayers is as low as ~1.1 W·m^{-1·K-1-1.7 W}·m^{-1·K-1, which is about 1.6 times as large as the monolayers for all the three materials. Electronic structure calculations show that all the} XI₂ bilayers are indirect-gap semiconductors with the band gap values between 1.84 eV and 1.96 eV at PBE level, which is similar as the corresponding monolayers. The calculated results of ZT show that the bilayer structures display much less direction-dependent TE efficiency and have much larger n-type ZT values compared with the monolayers. The dramatic difference between the monolayer and bilayer indicates that the inter-layer interaction plays an important role in the TE performance of XI₂, which provides the tunability on their TE characteristics.     

Assessment of the electronic conductivity of core-shell, Fe-doped LSGM ceramics by impedance spectroscopy

The structure, microstructure and low-temperature electrical properties of core-shell-type mixed conductors based on lanthanum gallate with Fe-doped grain boundaries are analyzed in depth. Electron probe microanalysis revealed that the iron concentration in the grain-boundary regions (shell) is below 1 at.% and their thickness is no more than 1.5 μm. The low-temperature (< 400 °C) electronic conductivity is enhanced by up to 2-3 orders of magnitude with respect to the corresponding undoped ceramics, as revealed by the analysis of impedance spectra combined with microstructural information. The electronic transport numbers lie in the range between 0.35 and 0.1 at 275 to 400 °C, decreasing at higher temperatures, where the influence of grain boundaries on the overall transport properties vanishes and the ionic conductivity increases.     

Current–voltage characteristics of armchair Sn nanoribbons

Two‐dimensional group‐IV lattices silicene and germanene are known to share many of graphene's remarkable mechanical and electronic properties. Due to the out‐of‐plane buckling of the former materials, there are more means of electronic funtionalization, e.g. by applying uniaxial strain or an out‐of‐plane electric field. We consider monolayer hexagonal Sn (stanene) as an ideal candidate to feasibly implement and exploit graphene physics for nanoelectronic applications: with increased out‐of‐plane buckling and sizable spin–orbit coupling it lends itself to improved Dirac cone engineering. We investigate the ballistic charge transport regime of armchair Sn nanoribbons, classified according to the ribbon width W = {3m – 1, 3m, 3m + 1} with integer m. We study transport through (non‐magnetic) armchair ribbons using a combination of density functional theory and non‐equilibrium Green's functions. Sn ribbons have earlier current onsets and carry currents 20% larger than C/Si/Ge‐nanoribbons as the contact resistance of these ribbons is found to be comparable. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

一维线性非共轭石墨烯基(CH2)n分子链的电子输运

一维非共轭烷烃链虽不具富电子或少电子特征,但常存在于单分子器件或多肽、蛋白质等生物分子中,对电子传输产生重要影响.为理解这类物质的电子输运特征,本研究设计了一维线性非共轭(CH2)n分子结模型,并利用密度泛函理论结合非平衡态格林函数的方法,对(CH2)n(n=1—12)线性分子链与两个石墨烯电极耦合而成的分子结进行了第...     

Mixed-valence manganites

Mixed-valence manganese oxides (R₁-_χA_χ)MnO₃ (R=rare-earth cation, A=alkali or alkaline earth cation), with a structure similar to that of perovskite CaTiO₃, exhibit a rich variety of crystallographic, electronic and magnetic phases. Historically they led to the formulation of new physical concepts such as double exchange and the Jahn-Teller polaron. More recent work on thin films has revealed new phenomena, including colossal magnetoresistance near the Curie temperature, dense granular magnetoresistance and optically-induced magnetic phase transitions. This review gives an account of the literature on mixed-valence manganites, placing new results in the context of established knowledge of these materials, and other magnetic semiconductors. Issues addressed include the nature of the electronic ground states, the metal-insulator transition as a function of temperature, pressure and applied magnetic field, the electronic transport mechanisms, dielectric and magnetic polaron formation, magnetic localization, the role of cation disorder and the Jahn-Teller effect. Sample preparation, and the properties of related ferromagnetic oxides are also discussed.     

Review of thermal transport and electronic properties of borophene

In recent years, two-dimensional boron sheets(borophene) have been experimentally synthesized and theoretically proposed as a promising conductor or transistor with novel thermal and electronic properties. We first give a general survey of some notable electronic properties of borophene, including the superconductivity and topological characters. We then mainly review the basic approaches, thermal transport, as well as the mechanical properties of borophene with different configurations. This review gives a general understanding of some of the crucial thermal transport and electronic properties of borophene, and also calls for further experimental investigations and applications on certain scientific community.     

Tailoring atomic structure to control the electronic transport in zigzag graphene nanoribbon

We have performed ab initio   density functional theory calculation to study the electronic transport properties of the tailored zigzag-edged graphene nanoribbon (ZGNR) with particular electronic transport channels. Our results demonstrated that tailoring the atomic structure had significantly influenced the electronic transport of the defective nanostructures, and could lead to the metal-semiconducting transition when sufficient atoms are tailored. The asymmetric I–V$I\text{–}V$ characteristics as a result of symmetry breaking have been exhibited, which indicates the route to utilize GNR as a basic component for novel nanoelectronics.     

Crystal structure, electronic and transport properties of AgSbSe2 and AgSbTe2

Undoped and p- and n-doped AgSbX₂ (X=Se and Te) materials were synthesized by direct fusion technique. The structural properties were investigated by X-ray diffraction and SEM microscopy. The electrical conductivity, thermal conductivity and Seebeck coefficient have been measured as a function of temperature in the range from 300 to 600 K.To enlighten electron transport behaviours observed in AgSbSe₂ and AgSbTe₂ compounds, electronic structure calculations have been performed by the Korringa-Kohn-Rostoker method as well as KKR with coherent potential approximation (KKR-CPA) for ordered (hypothetical AgX and SbX as well as AgSbX₂ approximates) and disordered systems (Ag_1−xSb_xX), respectively. The calculated density of states in the considered structural cases shows apparent tendencies to opening the energy gap near the Fermi level for the stoichiometric AgSbX₂ compositions, but a small overlap between valence and conduction bands is still present. Such electronic structure behaviour well agrees with the semimetallic properties of the analyzed samples.