CoMo/ZrO2-Al2O3催化剂的制备及其加氢脱氧性能

以ZrOCl₂·6H₂O和Al₂(SO₄)₃为原料,采用超声波共沉淀法制得一系列不同ZrO₂质量分数的ZrO₂- Al₂O₃复合氧化物载体;并以该复合氧化物为载体,采用等体积浸渍法制得Co和Mo质量分数分别为6.0%和16.0%的CoMo/ZrO₂-Al₂O₃催化剂。BET、XRD、H₂-TPR和NH₃-TPD等表征结果表明,ZrO₂-Al₂O₃复合氧化物载体具有较高的比表面积与较大的孔容、孔径,随着复合载体中ZrO₂质量分数的增加,复合载体比表面积逐渐减小。ZrO₂-Al₂O₃复合载体能高度分散活性组分,钴钼负载量接近其在载体上的单层分散阈值。相比于CoMo/Al₂O₃,CoMo/ZrO₂-Al₂O₃催化剂具有较高的还原性能和较多的表面酸性活性中心,由此导致其在苯酚加氢脱氧(HDO)反应中,具有较高的加氢脱氧活性和苯选择性。
     

纳米Al2O3包覆富锂锰基正极材料Li1.2Ni0.13Co0.13Mn0.54O2的性能研究

采用纳米三氧化二铝(Al₂O₃)对富锂锰基正极材料Li_1.2Ni_0.13Co_0.13Mn_0.54O₂进行表面均匀包覆, 并考察了最优纳米Al₂O₃包覆量下材料的电化学性能. 扫描电子显微镜(SEM)和透射电子显微镜(TEM)显示了纳米Al₂O₃对富锂锰基正极材料表面均匀包覆, X射线衍射分析(XRD)结果表明包覆后富锂材料依然具有良好的层状结构. 恒流充/放电循环测试发现, 包覆后的Li_1.2Ni_0.13Co_0.13Mn_0.54O₂材料的首次放电比容量为249.7 mA·h/g, 循环100次后的容量保持率为89.5%, 与未包覆的Li_1.2Ni_0.13Co_0.13Mn_0.54O₂材料相比, 容量保持率提升约13%. 循环伏安(CV)和电化学阻抗(EIS)测试结果表明, 纳米Al₂O₃包覆可有效抑制材料极化, 降低界面阻抗和电荷转移阻抗, 进而提升富锂锰基正极材料的电化学性能.     

ZnS/SiO2协同包覆光阳极制备高效率Zn-Cu-In-Se量子点敏化太阳能电池

通过光阳极协同包覆的策略抑制Zn-Cu-In-Se(ZCISe)量子点敏化太阳能电池(QDSC)中光阳极/电解液界面上的电荷复合过程,提高电荷收集效率和电池光伏性能。采用溶液法在ZCISe量子点敏化的光阳极表面依次沉积包覆ZnS和SiO₂双钝化层,实现较单一ZnS包覆层更有效的界面电荷复合抑制作用,从而提高QDSC的性能。在包覆ZnS/SiO₂双钝化层后,所组装的ZCISe QDSC光电转换效率由传统单一ZnS包覆的12.17%提高到13.23%,这归因于双钝化层对光阳极/电解液界面电荷复合过程的有效抑制,电荷收集效率得到相应提升。     

ZrO2修饰Al2O3纳米片负载钴催化剂的制备及其费托反应性能研究

通过水热法合成了Al₂O₃纳米片（Al₂O₃-CN）,采用浸渍法制备20%（质量分数）钴基催化剂,并应用于费托合成反应。制备的Al₂O₃-CN（226 m²/g）与商业氧化铝（Al₂O₃-C,249 m²/g）具有相近的比表面积,但Al₂O₃-CN孔尺寸分布更加集中。浸渍钴后,与Co/Al₂O₃-C催化剂相比,Co/Al₂O₃-CN催化剂表现出较高的还原度及更均匀的钴颗粒粒径分布。因此,Co/Al₂O₃-CN催化剂表现出更高的CO转化率和低的甲烷选择性。为了进一步提高Co/Al₂O₃-CN的催化性能,采用不同含量ZrO₂对Al₂O₃-CN进行修饰。表征结果表明,随着ZrO₂修饰量的增加,Al₂O₃-CN载体比表面积变化不明显,孔体积和孔径增大;相对应催化剂的钴颗粒粒径减小,活性位点数目增加。在相同反应条件下,经ZrO₂修饰催化剂CO转化率进一步提高,甲烷选择性降低。     

Al含量对Pt-S2O82-/ZrO2-Al2O3型固体超强酸催化剂异构化性能的影响

通过向S₂O₈^2-/ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和高稳定性的Pt-S₂O₈^2-/ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂的异构化性能的影响, 并采用XRD, BET, FTIR, TPR, TG-DTA, NH₃-TPD和ICP手段对催化剂进行了表征. 结果表明, Al能够延迟ZrO₂的晶化温度, 抑制硫的分解; Al能够增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃质量分数为2.5%时, Pt-S₂O₈^2-/ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最高, 正戊烷异构化收率可达60.02%, 选择性在98.2％以上.     

不同金属氧化物对钴基费托合成催化剂性能的影响

本实验在六方纳米片状的Co₃O₄(NMS-Co)上分别负载了1%含量的ZrO₂、Al₂O₃和MnO₂三种金属氧化物，制备反相催化剂模型，研究金属氧化物对钴基催化剂费托合成性能的影响。通过H₂-TPD、CO-TPD以及催化剂性能评价结果发现，ZrO₂和Al₂O₃能够显著增加NMS-Co催化剂的活性位点，在相同转化率条件下，反应温度从230℃分别降低至170、180℃，重质烃生成速率分别提升2.5、2倍，CH₄选择性从37.8%分别降低至3.6%、12.0%。然而，MnO₂使得NMS-Co催化剂CO转化率仅从30.9%增加到45.5%,CH₄选择性降低至16.5%。     

不同载体Ni基负载型催化剂对甲烷部分氧化制合成气催化行为研究

采用浸渍法制备了单一载体(Al₂O₃、ZrO₂、CeO₂)和ZrO₂、CeO₂改性的Al₂O₃复合载体的Ni催化剂,考察了在甲烷部分氧化制备合成气反应中的催化性能。通过N₂-物理吸附、H₂程序升温还原、X射线衍射、NH₃程序升温脱附和程序升温氧化等技术对催化剂进行了表征。结果表明,在单一载体催化剂中,Ni/Al₂O₃具有较大的比表面积,其初始反应活性较高,但该催化剂表面易形成大量的积炭而快速失活。Ni/ZrO₂和Ni/CeO₂催化剂比表面积较小,活性金属Ni在其表面分散性差,催化剂具有较低的CH₄转化率。而CeO₂和ZrO₂改性的Al₂O₃复合载体催化剂,具有较大的比表面积,反应活性明显高于单一载体催化剂。CeO₂-Al₂O₃复合载体催化剂具有最高的反应活性和较好的反应稳定性。同时表明,含CeO₂催化剂反应后表面积炭较少,CeO₂的储放氧功能增强了催化剂对O₂的活化,提高催化剂活性的同时,可以抑制积炭的生成。     

负载型铂催化剂中的载体效应

本文用程序升温热脱附法和氢氧滴定法研究了SiO₂、SiO₂·Al₂O₃、Al₂O₃、SiO₂·SnO₂和Al₂O₃·SnO₂等和Pt的相互作用,表明Pt和载体作用强弱的顺序为:Al₂O₃>SiO₂·Al₂O₃>SiO₂;发现SnO₂具有强化SiO₂和Al₂O₃载体效应的作用;提出Pt和载体相互作用较强部位可能是Pt和缺氧氧化物所形成的表面络合物--Pt-[Al₂O_x]和Pt-[SnO_x]。     

ZrO2和Al2O3载体对Mo基催化剂上甲烷化反应性能的影响

通过共沉淀法制备了ZrO₂和Al₂O₃载体,采用等体积浸渍法制备了MoO₃质量分数为5%的Mo/ZrO₂和Mo/Al₂O₃催化剂,并用于甲烷化反应。在三种反应气氛下对两种预硫化的Mo基催化剂进行评价,发现ZrO₂载体均可显著促进甲烷化反应,同时能够促进水汽变换（WGS）反应。通过XRD、H₂-TPR、XPS和TEM等表征发现,两种载体上Mo物种的硫化程度以及暴露的活性位数量不同,从而导致两种催化剂上催化性能差异显著。与Mo/Al₂O₃相比,Mo/ZrO₂催化剂上的MoO₃更易被还原,硫化程度也更高,并且Mo⁴⁺的含量更高,Mo⁶⁺的含量更低。虽然ZrO₂载体上MoS₂尺寸较大,边位置的Mo比例有所降低,但是由于MoS₂沿ZrO₂颗粒表面弯曲生长,使得MoS₂基面成为反应的活性位;因此,Mo/ZrO₂催化剂在甲烷化与WGS反应中表现出更优异的催化性能。     

介孔结构增强的Fe3O4超粒子@介孔SiO2的光热性能

采用湿化学法制备了多功能Fe₃O₄超粒子@介孔SiO₂复合材料.该纳米复合材料具有超顺磁性,在商用磁铁下可实现快速富集、分离.SiO₂的包覆增强了Fe₃O₄超粒子在近红外光区的吸收,提高了其光热性能;介孔结构的构建提高了近红外光的利用率,进一步提升了纳米复合物的光热性能,且介孔SiO₂的壳层越厚,光热性能越优.细胞实验结果表明,Fe₃O₄超粒子@介孔SiO₂在近红外光照射下具有较高的癌细胞杀伤能力.     

不同载体Ni基催化剂生物质热解气甲烷化反应性能

采用浸渍法制备了Ni金属负载在不同载体(SiO2、ZrO2、CeO2、Al2O3和Al2O3-CeO2)表面形成的催化剂,研究了水蒸气和载体对生物质热解气甲烷化反应性能的影响。结果表明,随着水蒸气量的增加CO转化率逐渐增大,而甲烷选择性呈现先增加后降低的变化趋势,当nw ater/ngas比值为0.26时达到最大。载体Al2O3相比SiO2、ZrO2和CeO2具有更大的比表面积和Ni金属分散度,促进了生物质热解气甲烷化反应活性和选择性。相比于Ni-Al2O3催化剂,Al2O3-CeO2复合载体具有更多的镍金属负载量活性金属分散度,以及最好的低温甲烷化反应性能。在300℃的低温条件下,Ni-Al2O3-CeO2催化剂的CO转化率达到97%,CH4增长率达到110%。     

Pd/Co3O4纳米颗粒负载于Al2O3纳米片高效催化甲烷燃烧

We report an efficient catalyst composed of ternary components prepared by inlaying Pd/Co₃O₄ nanoparticles in alkaline Al₂O₃ nanosheets for catalytic oxidation of methane. Pd/Co₃O₄ inlaid in alkaline Al₂O₃ exhibited a higher ability to break the C-H bond of methane than Pd/Co₃O₄ supported on SiO₂, ZrO₂, CeO₂, and acidic or neutral Al₂O₃. Our results show more oxygen vacancies and higher amounts of surface adsorbed oxygen on the surface of Pd/Co₃O₄/alkaline Al₂O₃ than on other catalysts, which is responsible for methane activation and conversion. Further, the Pd/Co₃O₄/alkaline Al₂O₃ catalyst can almost restore to its initial value in the absence of water when 5% (volume fraction) vapor water was cut off, although a decrease in activity occurred when water vapor was introduced to the reaction system. Even under a condition similar to the exhaust of a lean-burn natural gas engine, the catalytic performance of the Pd/Co₃O₄/alkaline Al₂O₃ catalyst is excellent, that is, methane could be completely converted when the sample temperature in the reaction atmosphere was ramped to 400℃.     

Reactions of 2-phenylpyrrole with bromobenzoylacetylene on metal oxides active surfaces

The solvent-free interaction of 2-phenylpyrrole with bromobenzoylacetylene (room temperature) upon their grinding with solid metal oxides (MgO, CaO, ZnO, BaO, Al₂O₃, TiO₂, ZrO₂) and salts (CaCO₃, ZrSiO₄) leads to either the cross-coupling product or the adduct of pyrrole addition to the riple bond of acetylene. The ethynylation is accompanied by the formation of intermediate and side products: E-2-(1-bromo-2-benzoylethenyl)-5-phenylpyrrole and 1,1-di(5-phenylpyrrol-2-yl)-2-benzoylethene. The activity of the metal oxides in the ethynylation reaction falls in the order (in the brackets, the content of 2-benzoylethynyl-5-phenylpyrrole in the reaction mixture is given): ZnO (81%), BaO (73%), Al₂O₃ (71%), MgO (69%), CaO (50%). The oxides, SiO₂, TiO₂, ZrO₂, and the salts, CaCO₃ and ZrSiO₄, are inactive in the ethynylation reaction affording only the intermediate adduct, with ZrO₂ the isolated yield of the bromoethenylpyrrole reaching 60%. ESR monitoring shows the reaction to start from one electron transfer from pyrrole to acetylene mediated by the oxide surface. The adduct is readily converted on Al₂O₃ to 2-(benzoylethynyl)-5-phenylpyrrole crystallized mostly as cis-rotamer (X-ray data).     

Supported dichlorobis(3-hydroxi-2-methyl-4-pyrone)Ti(IV) catalysts: Evaluation on ethylene polymerization

Dichlorobis(3-hydroxi-2-methyl-4-pyrone)Ti(IV) complex was grafted on different inorganic supports, namely different kinds of SiO₂, MAO-modified silica, MCM-41, Al₂O₃, ZrO₂ and MgO. The resulting supported catalysts were shown to be active in ethylene polymerization using methylaluminoxane (MAO) as cocatalyst, most of them being even more active that the homogeneous complex. The highest catalyst activities were observed for the Ti complex supported on SiO₂ 948 activated at 450 °C, MCM-41 and Al₂O₃.     

Post-modification using aluminum isopropoxide after dye-sensitization for improved performance and stability of quasi-solid-state solar cells

In this study, dye-sensitized TiO₂ electrodes were immersed into a solution of aluminum isopropoxide and after hydrolysis quasi-solid-state solar cells were fabricated. The interaction between the dye and the resulting Al₂O₃ overlayer was investigated by ultraviolet–visible (UV–vis) spectrum, Fourier transform infrared (FTIR) spectrum and X-ray photoelectron spectrum (XPS). The current density–voltage (I–V) characteristics showed that the overlayer increased the photovoltage and decreased the photocurrent under low intensity irradiation, and increased both the photovoltage and photocurrent under AM 1.5 irradiation. The Al₂O₃ overlayer at the dye/electrolyte interface resulted in a 28% improvement in overall photo-to-electrical conversion efficiency from 2.60 to 3.32%. Dark current measurements showed that Al₂O₃ acted as an insulator barrier to retard recombination between the TiO₂ and dye/quasi-solid-state electrolyte interface. Without encapsulation, dye-sensitized solar cells with Al₂O₃ coating after sensitization also exhibited improved stability compared to cells without coating.     

The nature of the surface site for isocyanate produced in the reaction of ammonia and carbon monoxide over supported catalysts

The reaction of CO and NH₃ was performed over M/X (M=Rh, Ru, Pd; X=Al₂O₃, SiO₂, TiO₂) films. Infrared spectroscopy was used to monitor the formation of surface intermediates. Isocyanate (NCO) was detected for all of the metals when the support was Al₂O₃ or SiO₂, but not for TiO₂. The NCO resided on the Al₂O₃ support for all M/Al₂O₃ catalysts, but on the metal when the support was SiO₂. It was concluded that the formation and location of the NCO was dependent upon the extent of NH₄⁺ formation on the various supports.     

TPAOH处理制备的微介孔催化剂物化性质与噻吩烷基化性能研究

采用不同浓度的TPAOH溶液处理不同SiO_2/Al_2O_3物质的量比的HZSM-5分子筛,制备了微孔-介孔多级孔HZSM-5催化剂。结果表明,采用不同浓度的TPAOH溶液处理不同SiO_2/Al_2O_3物质的量比的HZSM-5分子筛能够脱出HZSM-5分子筛的骨架硅而产生介孔,介孔孔径随TPAOH溶液浓度和SiO_2/Al_2O_3物质的量比的增大而增大;TPAOH溶液处理能够调变HZSM-5催化剂的酸性。采用不同浓度的TPAOH溶液处理SiO_2/Al_2O_3物质的量比分别为50、80和150的HZSM-5分子筛,其中,SiO_2/Al_2O_3物质的量比为50的HZSM-5弱中酸酸强度、相对酸量、B酸和L酸含量明显高于SiO_2/Al_2O_3物质的量比为80和150的HZSM-5分子筛。经不同浓度的TPAOH溶液处理后SiO_2/Al_2O_3物质的量比为50的HZSM-5催化剂具有最佳的噻吩烷基化反应性能。     

不同载体对负载型Cu-Fe催化剂CO加氢反应性能的影响

以不同的氧化物为载体,采用共浸渍法制备了一系列负载型的Cu-Fe催化剂Cu-Fe/MO_x(MO_x=ZnO、ZrO₂、TiO₂、SiO₂、MgO、Al₂O₃),并采用X射线衍射(XRD)、N₂吸附(N₂-adsorption)、程序升温还原(H₂-TPR)和一氧化碳程序升温脱附(CO-TPD)技术对催化剂进行了表征。在温度为250℃、压力为3 MPa和原料气空速为6 000 mL/(g·h)的反应条件下,在连续流动微型固定床反应装置上考察了其催化CO加氢合成低碳醇的反应性能。结果表明,与其他氧化物为载体的催化剂相比,Cu-Fe/SiO₂催化剂表面CuO的分散度较高,在较低的温度下容易被还原,具有较强的CO吸附能力,从而同时具有较高的活性和低碳醇选择性。