三维石墨烯金属网固相萃取测定有机磷农药残留

以金属网为基体材料,通过化学键合的方式将氧化石墨烯和Au纳米颗粒层层组装到金属网表面,得到一种Au纳米颗粒改性的石墨烯气凝胶修饰的金属网萃取材料,并应用于有机磷农药的富集检测.与商用的萃取材料进行对比,相较于SAX、C18、-NH2、Carb、Florisil等材料,金纳米颗粒改性的三维石墨烯气凝胶金属网对有机磷农药分...     

石墨烯基气凝胶小球的可控制备

石墨烯气凝胶是由二维石墨烯片层组装成的三维宏观材料,因其孔隙率高、比表面积大和密度低等特点在水体污染物的吸附去除方面具有广阔的应用前景,已成为当今的研究热点。然而相关研究大多集中在块体石墨烯气凝胶,对于气凝胶小球的研究较少。本文结合相关领域的最新研究进展,综述了石墨烯基气凝胶小球的制备方法,包括静电喷雾、静电纺丝、微流控和湿纺等方法;以湿纺法为代表,分析了气凝胶小球的成型影响因素,如GO分散体的浓度和黏度、挤出参数、凝固浴的种类和浓度等;并进一步分析了可用于调节材料孔径的因素,例如通过控制GO浓度、GO片层尺寸、冷冻处理的温度等可实现在一定范围内材料孔径的调整。针对废水中处理对象的不同,设计吸附性能、循环使用性能优异及微观形貌可控的石墨烯基气凝胶小球并寻求制备方法的优化与创新仍是未来探索的重点。     

石墨烯基材料在毛细管电泳中的应用进展

石墨烯基材料(石墨烯、氧化石墨烯、还原氧化石墨烯和石墨烯量子点)是一种新型的单层片状结构碳纳米材料,具有巨大的比表面积、良好的热稳定性和化学稳定性、较强的π-π电子共轭作用、疏水作用及氢键作用等,在分离科学领域展现了非常理想的应用前景。该文主要综述了石墨烯基材料近年来在毛细管电泳(CE)中的研究进展,包括作为背景电解质的添加剂、毛细管电色谱柱的固定相、CE-电化学检测电极的修饰材料和CE样品前处理的新型吸附剂材料等,并对其在CE领域未来的发展和应用进行了展望。     

碳化硅块状气凝胶的制备及应用

碳化硅气凝胶具有高温稳定性、低热膨胀系数、良好的抗热震性以及抗氧化和耐腐蚀等优异的性质,在高温和高腐蚀性环境下的隔热、电磁吸波、过滤和吸附等领域具有较大的应用潜力。然而,块状碳化硅气凝胶的可控制备一直是一项较大的挑战。本文综述了块状碳化硅气凝胶在制备工艺和应用两个方面的研究进展,首先分析总结了各种制备工艺及其优缺点,包括有机/SiO₂复合气凝胶碳热还原法、预陶瓷化聚合物裂解法、化学气相沉积法、高温气相渗硅法和碳化硅纳米线组装法;然后,详细介绍了碳化硅气凝胶在高温隔热和电磁吸波两个领域的应用研究进展;最后,展望了碳化硅气凝胶未来的若干发展方向。     

层间共价增强石墨烯材料的构筑、性能与应用

大批量石墨烯可控制备技术的逐渐成熟为实现其宏观组装和应用提供了基础。在众多的组装策略中,调节石墨烯层间的界面相互作用可以直接影响组装体的力学、电学、热学以及渗透等性质,具有重要的意义。石墨烯片层间以共价键连接的层间共价石墨烯材料以其可调的层间距、较强的层间作用力、丰富的功能化、以及可能的原子构型重排等特性,受到了广泛的关注和深入的研究。相比于其他非共价的键合手段,共价连接是一种更为牢固的枢纽。本文中我们将总结讨论层间共价石墨烯材料的构筑方法、性能以及应用。在构筑方法中,依据石墨烯本身的制备方法分为氧化还原法以及化学气相沉积法,而在氧化还原法中,以其宏观材料的形貌分为纸状和纤维状来讨论。接着,我们重点介绍了层间共价对其力学和电学性能的影响,并概述了此类宏观组装体材料的应用。层间共价石墨烯材料继承了石墨烯自身优异的特性,同时也具有宏观组装所赋予的性能,有望在多个领域得到广泛的应用。     

石墨烯作为硫载体在锂硫电池中的研究进展

锂硫电池因其超高的理论能量密度以及硫资源丰富、成本低廉、无毒的优点,被认为是极具发展潜力与应用前景的新一代储能设备。然而,硫正极导电性差、体积膨胀以及穿梭效应严重等问题严重制约了其商业化应用。石墨烯具有高比表面积、高导电性和高柔韧性,并且易于进行表面化学修饰及组装,是一种理想的硫载体材料。本文主要综述了近年来三维石墨烯、表面化学修饰的石墨烯、石墨烯基复合材料以及石墨烯基柔性材料在锂硫电池正极中的研究现状,并展望了石墨烯作为硫载体在锂硫电池正极中的发展趋势。     

氧化石墨烯/聚合物复合水凝胶的研究进展

氧化石墨烯是一种具有单原子厚度的二维材料, 具有优异的力学性能和良好的水分散性, 其表面有大量的含氧官能团. 将氧化石墨烯引入水凝胶体系中可以提高水凝胶的机械性能, 丰富其刺激响应的类型. 目前, 氧化石墨烯水凝胶在高强度、 吸附、 自愈合及智能材料等很多领域均有出色的表现. 氧化石墨烯水凝胶的研究已有10年的历史. 本文总结了氧化石墨烯水凝胶的制备方法, 归纳了智能氧化石墨烯水凝胶在光热响应、 pH响应和自愈合3个方面的响应机理和研究进展, 并综合评述了其在高强度水凝胶、 生物医学、 智能材料和污水处理等方面的应用前景.     

一种高效的多孔氮掺杂碳基气凝胶催化剂及其催化乙苯氧化性能

通过水热合成和高温煅烧的方法制备了多孔氮掺杂碳基复合气凝胶,其可作为一种高效的催化剂.该方法是以蒲绒和石墨烯气凝胶作为碳源和模板,尿素作为氮源.分别采用XRD,FT-IR,Raman和TEM对这些催化剂进行表征分析.以叔丁基过氧化氢为氧化剂,探究该复合气凝胶在乙苯选择性氧化生成苯乙酮的反应体系中的催化性能,实验结果表明,该复合气凝胶在该体系中具有优异的催化活性,苯乙酮的选择性可达92%以上.这是由于复合气凝胶中的多孔结构,氮元素的掺杂以及蒲绒和石墨烯气凝胶之间的相互作用.将生物质蒲绒转化为高催化活性碳材料,这种新颖的方法为寻找高性能催化氧化乙苯的催化剂提供了新的设计前景.     

石墨烯基水凝胶的研究进展

石墨烯具有独特的导电、导热和力学性能,既能够自组装为电化学性能优良的石墨烯水凝胶,又可以与小分子和聚合物进行复合制备多功能性复合水凝胶,大幅度地拓展了传统水凝胶的应用范围。本文主要分为四部分来综述近些年来石墨烯基水凝胶的研究进展。第一部分简要介绍了石墨烯的研究背景和石墨烯基水凝胶的研究意义。第二部分主要根据石墨烯基水凝胶的组成将其分为石墨烯水凝胶、石墨烯/小分子和石墨烯/聚合物复合水凝胶三类,分别介绍了它们的制备方法、形成机理和凝胶性能。其中,对石墨烯/小分子复合水凝胶的介绍以石墨烯基超分子水凝胶为主,而对石墨烯/聚合物复合水凝胶的介绍以智能型水凝胶为主。第三部分主要介绍了石墨烯基水凝胶在超级电容器、水处理、控释药物、微流体开关、催化剂载体等方面的应用和发展。最后,对该领域所面临的挑战进行了总结和展望。     

生物高分子-氧化石墨烯三维多功能复合凝胶的制备及其血液净化性能

以生物高分子(壳聚糖、白蛋白、脱氧核糖核酸)为交联剂与氧化石墨烯片层进行三维自组装,冻干后得到生物高分子-氧化石墨烯复合凝胶。通过扫描电镜、原子力显微镜、纳米粒度分析仪等分析其物化性能。结果表明:生物高分子成功组装到氧化石墨烯片层上,并形成三维多孔结构,制备的凝胶显示出极好的血液相容性,有效抑制了红细胞的溶血现象,对阳离子毒性分子及重金属离子有较高的吸附量。     

Facile synthesis of nitrogen-doped graphene aerogels for electrochemical detection of dopamine

Nitrogen-doped graphene aerogels with three-dimensional network structures are fabricated using hydrothermal method which includes the reduction of graphene oxide by organic amine and self-assembly of reduced graphene oxide. The effect of amine-containing compounds including aniline, 2-aminoethanol, ethylenediamine, melamine and chitosan on the assembly of nitrogen-doped graphene aerogel is investigated. The microstructure and chemical composition of nitrogen-doped graphene aerogels are characterized. The results reveal that nitrogen-doped graphene aerogel prepared using aniline as nitrogen source possesses a large specific surface area, high nitrogen content, good mechanical strength and excellent electrical conductivity. Based on these features, the as-prepared nitrogen-doped graphene aerogel shows high performance in electrochemical detection of dopamine in the presence of uric acid and ascorbic acid. Given the facile and scalable processability of aerogels, the proposed nitrogen-doped graphene aerogels are expected to have potential applications in sensors and other related devices.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.     

Aqueous Dispersions of Graphene from Electrochemically Exfoliated Graphite

A facile and environmentally friendly synthetic strategy for the production of stable and easily processable dispersions of graphene in water is presented. This strategy represents an alternative to classical chemical exfoliation methods (for example the Hummers method) that are more complex, harmful, and dangerous. The process is based on the electrochemical exfoliation of graphite and includes three simple steps: 1) the anodic exfoliation of graphite in (NH₄)₂SO₄, 2) sonication to separate the oxidized graphene sheets, and 3) reduction of oxidized graphene to graphene. The procedure makes it possible to convert around 30 wt % of the initial graphite into graphene with short processing times and high yields. The graphene sheets are well dispersed in water, have a carbon/oxygen atomic ratio of 11.7, a lateral size of about 0.5–1 μm, and contain only a few graphene layers, most of which are bilayer sheets. The processability of this type of aqueous dispersion has been demonstrated in the fabrication of macroscopic graphene structures, such as graphene aerogels and graphene films, which have been successfully employed as absorbents or as electrodes in supercapacitors, respectively.     

Comparative study of graphene aerogels synthesized using sol−gel method by reducing graphene oxide suspension

A graphene oxide aerogel synthesized from graphene oxide hydrogel and graphene aerogels have been synthesized using the sol?gel method by reducing a suspension of graphene oxide with various reducing agents: a mixture of hypophosphorous acid and iodine, L-ascorbic acid, sodium metabisulfite, and by hydrothermal treatment. The obtained aerogels have been studied by scanning electron microscopy, IR spectroscopy, Raman spectroscopy, X-ray powder diffraction, and X-ray photoelectron spectroscopy. Comparative studies of graphene aerogels have shown that their properties, namely density, specific surface area, reduction degree, surface morphology, defectiveness of graphene sheets, interlayer spacing, average sizes of coherent scattering regions, number of layers, and crystallite size in the basal plane in graphene crystallites depend on the method of synthesis.     

Superelastic,Macroporous Polystyrene‐Mediated Graphene Aerogels for Active Pressure Sensing

Three‐dimensional (3D) graphene‐based polymer/graphene aerogels with excellent mechanical properties are crucial for broad applications. The creation of such polymer/graphene aerogels remains challenging because of the poor dispersion and compatibility of polymer within the graphene matrix. By using the freezing‐directed assembly of graphene under the assistance of surfactant, 3D macroporous polystyrene/graphene aerogels (MPS‐GAs) with lightweight, superelastivity (80 % strain), high strength (80 kPa), and good electrical properties have been achieved in this study. The as‐prepared MPS‐GAs shows excellent electromechanical performance with stable cyclic resilient properties and sensitive resistance responses, thus making the MPS‐GAs promising candidates for applications in actuators, elastic conductors, strain/pressure sensors, and wearable devices.     

Fiber-reinforced three-dimensional graphene aerogels for electrically conductive epoxy composites with enhanced mechanical properties

To enhance the mechanical properties of three-dimensional graphene aerogels with aramid fibers,graphene/organic fiber aerogels are prepared by chemical reduction of graphene oxide in the presence of organic fibers of poly(p-phenylene terephthalamide)(PPTA) and followed by freeze-drying. Thermal annealing of the composite aerogels at 1300 ° C is adopted not only to restore the conductivity of the reduced graphene oxide component but also to convert the insulating PPTA organic fibers to conductive carbon fibers by the carbonization. The resultant graphene/carbon fiber aerogels(GCFAs) exhibit high electrical conductivities and enhanced compressive properties, which are highly efficient in improving both mechanical and electrical performances of epoxy composites. Compared to those of neat epoxy, the compressive modulus, compressive strength and energy absorption of the electrically conductive GCFA/epoxy composite are significantly increased by 60%, 59% and 131%, respectively.     

A review on elastic graphene aerogels: Design,preparation, and applications

Graphene aerogels with unique properties, such as ultralow density, super-elasticity, high specific surface area, and excellent thermal stability, have undergone great progress in the past decades. Especially, super-elastic graphene aerogels provide a highly attention-catching platform for developing advanced energy devices, pressure sensors, contaminates adsorbents, and electromagnetic wave shielding and absorption materials, and so forth. In this review, we begin with the introduction and discussion of various fabrication techniques and compare their advantages and disadvantages, focusing on the template-free assembly process and template-assisted assembly process. Then, we summarize the factors influencing the compressibility and elasticity of graphene aerogels, including intrinsic properties of building blocks, constituent materials, and structure design, and their wide applications. At the end, we discuss the current challenges and future prospects of this field.     

Exploring the Interaction between Graphene Derivatives and Metal Ions as a Key Step towards Graphene–Inorganic Nanohybrids

The assembly of graphene derivatives and inorganic nanostructures opens up an exciting new field in the functionalization of nanomaterials. However, a better understanding of the interaction between graphene derivatives and inorganic precursors remains a challenge. This work provides an efficient strategy for exploring this interaction by first modifying graphene oxide with aniline, glycine, and glycyl glycine, respectively, and thus engineering the chemical microenvironments on graphene sheets for anchoring metal ions. After that, the affinities of graphene derivatives to various metal ions can be investigated with the help of a conventional electrochemical method. The method highlights the importance of graphene chemistry in hybrid preparation and provides design principles for chemical modifiers used in the construction of multifunctional carbon–inorganic nanostructures.     

多巴胺和L-精氨酸制备超轻氮掺杂石墨烯气凝胶吸油性能的研究

采用水热法制备了超轻氮掺杂石墨烯气凝胶。分析表征结果表明,多巴胺不仅为还原剂而且提供氮源,石墨烯溶液前躯体的pH值对水热法制备超轻氮掺杂石墨烯气凝胶很大的影响,通过调节多巴胺和L-精氨酸在石墨烯溶液前躯体的浓度,可制备密度为2.54 mg/cm³超轻氮掺杂石墨烯气凝胶,由于氮掺杂、低密度和大的比表面积,超轻氮掺杂石墨烯气凝胶对各种油品都有良好的吸附性能。     

The Preparation of Compressible and Fire‐Resistant Sponge‐Supported Reduced Graphene Oxide Aerogel for Electromagnetic Interference Shielding

We here report a facile method to fabricate a sponge‐supported reduced graphene oxide aerogel (S‐RGOA) using a commercial melamine sponge and graphene oxide (GO). Firstly, GO sheets were self‐assembled within the melamine sponge by the assistance of a chemical cross‐linking agent; and then, freeze‐drying and thermal treatment were adopted to prepare S‐RGOA, in which continuous porous reduced graphene oxide (RGO) network formed between the skeleton. The resulting S‐RGOA exhibited a high electromagnetic interference shielding effectiveness (EMI SE) of 20.4‐27.3 dB in 8–12 GHz and the specific EMI SE could reach 1437 dB?cm³g^?1. The mechanical test suggests that the lightweight S‐RGOA is compressible and possesses low energy dissipation. Burning and TGA measurements indicate that S‐RGOA is fire‐resistant and has excellent thermal stability. Our work provides an economical and environmentally‐friendly method to fabricate RGO aerogels for using as electromagnetic interference materials.