Reaction of the novel Ru<Subscript>3</Subscript>(CO)<Subscript>10</Subscript>[Ph<Subscript>2</Subscript>P(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>Si(OEt<Subscript>3</Subscript>)]<Subscript>2</Subscript> complex on SBA-15 and MCM-41 mesoporous silicas

The reaction of Ru₃(CO)₁₂ with 2(diphenylphosphino)ethyl-triethoxysilane (DPTS) in hydrocarbons, leads to the functionalized Ru₃(CO)_12−n [Ph₂P(CH₂)₂Si(OEt₃)] _n (n = 1,2) complexes. The complex with two phosphine substituents was chemically anchored on mesoporous silicas, SBA-15 and MCM-41, in order to obtain two hybrid materials characterized by a different localization of the metal centre on the surface of the porous supports. A detailed investigation of the cluster, before and after chemical anchoring on the mesoporous silicas, was pursued. Particular attention was also devoted to the study of the morphological, structural and textural properties of the metal-functionalised silicas (Ru/SBA-15 and Ru/MCM-41) by infrared spectroscopy (FT-IR), scanning electron microscopy, X-ray diffraction and N₂ physisorption analysis.     

Mesoporous SBA-15 materials modified with PW or W active species as catalysts for the epoxidation of olefins with H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Five catalysts containing PW or W active species that anchored onto aminosilylated mesoporous silica SBA-15 by a post-grafting route were prepared and the resulting PW or W/APTES/SBA-15 hybrid materials were characterized by XRD, N₂ adsorption/desorption, surface area analysis, TEM, FT-IR, and ICP (inductively coupled plasma atomic emission spectroscopy). The names of these catalysts have been abbreviated as SBA-15m-a, SBA-15m-b, SBA-15m-c, SBA-15m-d, and SBA-15m-e according to the different active species. The PW or W active species were highly dispersed in the channels of the modified mesoporous materials. The interaction between PW or W species and amino groups grafted on the channel surface of SBA-15 led to the immobilization of PW or W species. Their catalytic activity in the epoxidation of cyclooctene with H₂O₂ as oxidant was investigated. Among them, SBA-15m-a showed the best performance, with 98.9% conversion and 98.4% selectivity. The catalyst could be reused for six times with a little decrease in activity.     

Immobilization of hemoglobin on SBA-15 applied to the electrocatalytic reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The direct electron transfer between hemoglobin (Hb) and an electrode was realized by first immobilizing the protein onto SBA-15.The results of the immobilization showed that the adsorption was pH-dependent with a maximum adsorption near the isoelectric point of the protein, and SBA-15 with a larger pore diameter showed greater adsorption capacity for Hb. UV–vis spectroscopy and nitrogen adsorption analysis indicated that Hb was adsorbed within the channel of SBA-15 and no significant denaturation occurred to the protein. The Hb/SBA-15 composite obtained was used for the fabrication of a Hb biosensor to detect hydrogen peroxide. A pair of well-defined redox peaks at −0.337 and −0.370 V on the Hb/SBA-15 composite modified glassy carbon electrode was observed, and the electrode reactions showed a surface-controlled process with a single proton transfer at a scan rate range from 20 to 1,000 mV/s. The sensor showed a fast amperometric response, a low detection limit (2.3 × 10⁻⁹ M) and good stability for the detection of H₂O₂. The electrochemical results indicated that the immobilized Hb still retained its biological activity.     

Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Glass formation in the Al(IO<Subscript>3</Subscript>)<Subscript>3</Subscript>-Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-HIO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

On the basis of experimental data obtained in the study of glass-formation boundaries in the Al₂(SO₄)₃-HIO₃-H₂O, Al(IO₃)₃-Al₂(SO₄)₃-H₂O, and Al(IO₃)₃-HIO₃-H₂O systems and using geometrical analysis, we predict the positions of glass-formation boundaries in the Al(IO₃)₃-Al₂(SO₄)₃-HIO₃-H₂O four-component system along 60, 40, and 25 wt % H₂O sections.     

Oxidative desulfurization of thiophene derivatives with H<Subscript>2</Subscript>O<Subscript>2</Subscript> in the presence of catalysts based on MoO<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> under mild conditions

The catalysts based on MoO₃/Al₂O₃ were synthesized and tested using aqueous hydrogen peroxide as the oxidant in the oxidative desulfurization of thiophene, benzothiophene (BT) and dibenzothiophene (DBT) into the corresponding sulfones. Among catalysts tested, 15%(MoO₃–WO₃)/Al₂O₃ prepared by a conventional impregnation method was considerably active for the oxidation of thiophene, BT and DBT, which could achieve higher than 99.2% conversions at lower reaction temperature (≤338 K). The use of hexadecyltrimethyl ammonium bromide as the phase-transfer reagent in small amounts could promote the reaction efficiently.     

Effects of surface residual species in SBA-16 on encapsulated chiral (1S,2S)-DPEN-RuCl<Subscript>2</Subscript>(TPP)<Subscript>2</Subscript> in asymmetric hydrogenation of acetophenone

The SBA-16 obtained by different routes of elimination of organic templates were used as the hosts for encapsulation of chiral Ru complex (1S,2S)-DPEN-RuCl₂(TPP)₂ (1) (DPEN = 1,2-diphenylethylene-diamine, TPP = triphenyl phosphine). The methods for removing templates had distinct effects on the amount of residual template in SBA-16, which made the SBA-16 with different surface and structure properties. 1 encapsulated in SBA-16 extracted with the mixture of pyridine and ethanol showed higher activity and enantioselectivity for acetophenone asymmetric hydrogenation.     

Glass formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Al(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

Glass formation boundaries in the Al₂(SO₄)₃-Al(NO₃)₃-H₂O system were determined. IR spectra were studied. Schemes of structural rearrangements within the boundaries of a second glass formation region in the Al(NO₃)₃-H₂O binary subsystem are suggested. A structure is suggested for glassy Al(NO₃)₃H₂O.     

Phase equilibria in the Ce<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Ce₂O₃-K₂O-P₂O₅ ternary system has been investigated by thermoanalytical methods (DTA, DSC), powder X-ray diffraction, XPS and IR spectroscopy. The existence of three double potassium-cerium(III) phosphates has been confirmed and a new binary phosphate K₄Ce₂P₄O₁₅ has been found. Phase diagram and isothermal section at room temperature of the system Ce₂O₃-K₂O-P₂O₅ have been presented.     

The 3Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>-EuLaGa<Subscript>3</Subscript>S<Subscript>7</Subscript> system

The La₂S₃-Ga₂S₃-EuS system has been investigated along the 3Ga₂S₃-EuLaGa₃S₇ join by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis). is a quasi-binary eutectic-type section of the ternary system. Solubility on the base of both components has been revealed in the system. Solubility at room temperature is 3 mol % EuLaGa₃S₇ on the Ga₂S₃ side 1.5 mol % Ga₂S₃ and on the base of the EuLaGa₃S₇ compound. The coordinates of the eutectic point are 80 mol% EuLaGa₃S₇ and 1020 K.     

Solubility of YF<Subscript>3</Subscript>, CeF<Subscript>3</Subscript>, PrF<Subscript>3</Subscript>, NdF<Subscript>3</Subscript>, and DyF<Subscript>3</Subscript> in solutions containing sulfuric and phosphoric acids

The solubility of YF₃, CeF₃, PrF₃, NdF₃, and DyF₃ in solutions containing 0–4.496% mol/L (0–35 wt %) of H₂SO₄ and 0–27.6 g/L of H₃PO₄ (0–20 g/L of P₂O₅) at 20 °C was determined. Higher solubility in sulfuric acid solutions compared to that in hydrochloric and phosphoric acid solutions was attributed to the formation of fluorosulfate complexes M₂(SO₄)F₄(M = Y, Ce, Pr, Nd, Dy). The effect of minor concentrations of the phosphate ions on the solubility of YF₃, CeF₃, PrF₃, NdF₃, and DyF₃ in sulfuric acid solutions and the effect of fluoride ions on the recovery of lanthanides during sulfuric acid leaching from the phosphohemihydrate were discussed.     

Thermal decomposition of [Cd(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

Thermal decomposition of [Cd(NH₃)₆](NO₃)₂ was studied by thermogravimetry (TG) with simultaneous differential thermal analysis (SDTA) for two samples and at two different sets of measurement parameters. The gaseous products of the decomposition were on-line identified by evolved gas analysis (EGA) with a quadruple mass spectrometer (QMS). The decomposition of the title compound proceeds, for both cases, in the three main stages. In the first stage, deammination of [Cd(NH₃)₆](NO₃)₂ to [Cd(NH₃)](NO₃)₂ undergoes by three steps and 5/6 of all NH₃ molecules are liberated. At second stage the liberation of residual 1/6NH₃ molecules and the formation of Cd(NO₃)₂ undergoes. However, during this process simultaneously a two-step oxidation of a part of ammonia molecules also takes place. In a first step as a result a mixture of ammonia, water vapour and nitrogen is formatted. At the second step, subsequent oxidation of a next part of NH₃ molecules undergoes. As a result, a mixture of nitrogen oxide, nitrogen and water vapour is formatted, what for these both steps clearly indicates the EGA analysis. The third stage of the thermal decomposition is connected with the melting and subsequent decomposition of residual Cd(NO₃)₂ to oxygen, nitrogen dioxide and solid CdO. Additionally, third sample was measured by differential scanning calorimetry (DSC) and the results are fully consistent with those obtained by TG.     

Structure and properties of Ce<Subscript>3</Subscript>Pd<Subscript>3</Subscript>Bi<Subscript>4</Subscript>, CePdBi,and CePd<Subscript>2</Subscript>Zn<Subscript>3</Subscript>

The intermetallic cerium compounds Ce₃-Pd₃Bi₄, CePdBi, and CePd₂Zn₃ were synthesized from the elements in sealed tantalum ampoules in an induction furnace. The compounds were characterized by X-ray powder and single crystal diffraction: CeCo₃B₂ type (ordered version of CaCu₅), P6/mmm, a = 538.4(4), c = 427.7(4) pm, wR2 = 0.0540, 115 F ² values, 9 variables for CePd₂Zn₃ and Y₃Au₃Sb₄ type, I \({\bar 4}\)3d, a = 1005.2(2) pm, w R2 = 0.0402, 264 F ² values, 9 variables for Ce₃Pd₃Bi₄, and MgAgAs type, a = 681.8(1) pm for CePdBi. The bismuthide structures are build up from three-dimensional networks of corner-sharing PdBi₄ tetrahedra with Pd–Bi distances of 281 (Ce₃Pd₃Bi₄) and 296?pm (CePdBi), respectively. The cerium atoms are located in larger voids of coordination number 12 (Ce₃Pd₃Bi₄) and 10 (CePdBi). In CePd₂Zn₃ the cerium atoms fill larger channels within the three-dimensional [Pd₂Zn₃] network with 18 (6 Pd + 12 Zn) nearest neighbors. The three compounds contain stable trivalent cerium with experimental magnetic moments of μ_eff = 2.70(2), 2.48(1), and 2.49(1) μ_B/Ce atom for CePd₂Zn₃, Ce₃Pd₃Bi₄, and CePdBi, respectively. Susceptibility and specific heat data gave no hint for magnetic ordering down to 2.1?K.     

Solubility in the diagonal sections of the 2KCl + Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> ⇆ 2KNO<Subscript>3</Subscript> + CaCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O system

Solubility data in the diagonal sections of the quaternary reciprocal 2KCl + Ca(NO₃)₂ → 2KNO₃ + CaCl₂–H₂O system at 25 and 15°C are presented. It has been shown that the quaternary system has no stable diagonal at the studied temperatures, but contains a stable pair of salts, namely, potassium nitrate and calcium chloride. The obtained data can be used to optimize the thermal and concentrational parameters of the synthesis of potassium nitrate from calcium nitrate and potassium chloride.     

Copolymerization of styrene and 1-hexene with a TiCl<Subscript>4</Subscript>-Al(C<Subscript>6</Subscript>H<Subscript>13</Subscript>)<Subscript>3</Subscript> · Mg(C<Subscript>6</Subscript>H<Subscript>13</Subscript>)<Subscript>2</Subscript> catalytic system

The copolymerization of styrene and 1-hexene with the TiCl₄-Al(C₆H₁₃)₃ · Mg(C₆H₁₃)₂ catalytic system has been investigated. The microstructure of polymer chains, molecular-mass characteristics, and thermophysical properties of the resulting copolymers have been studied. These copolymers contain 15 to 65 mol % styrene and mostly consist of isotactic polystyrene and poly(1-hexene) blocks.     

Oxonitrates VO(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and MoO<Subscript>2</Subscript>(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and nitronium and nitrosonium nitratometallates as nitrating agents

Dissolution of vanadium in anhydrous HNO₃ followed by exposure of the solution in a dessicator over P₂O₅ gave liquid vanadyl trinitrate (I). The X-ray diffraction analysis of I was carried out for a single crystal grown on cooling the liquid in a sealed capillary. The structure is composed of VO(NO)₃ molecules in which the V atom has an unusually high C.N. 7; it coordinates the terminal O atom and three bidentate nitrate groups to form a distorted pentagonal bipyramid as the coordination polyhedron with the terminal O atom occupying one axial vertex. Using the GAMESS program package, ab initio calculation of the structure of VO (NO₃)₃ in the liquid phase was carried out. It was shown that in all three physical states, vanadyl trinitrate retains its molecular structure almost invariable. Toluene and naphthalene nitration using I and (NO₂)[Fe(NO₃)₄], NO[Cu(NO₃)₃], (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅], and MoO₂(NO₃)₂ proceeds at high rates at low temperatures to give an unusually high para-nitrotoluene percentage in the products as compared with the ortho-isomer. The activity of the studied compounds in the nitration of naphthalene decreases in the series VO(NO₃)₃ > (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅] > MoO₂(NO₃)₂.     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

Structure and some properties of [UO<Subscript>2</Subscript>CrO<Subscript>4</Subscript>{CH<Subscript>3</Subscript>CON(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

A new complex [UO₂CrO₄{CH₃CON(CH₃)₂}₂] (I) was studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are monoclinic: a = 13.8108(11) Å, b = 8.6804(7) Å, c = 13.0989(10) Å, β = 104.777(1)°, V = 1518.4(2) ų, space group P2₁/c, Z = 4, R = 2.39%. The structure of I contains infinite chains of the [UO₂CrO₄{CH₃CON(CH₃)₂}₂] composition running along [001]; the complex belongs to the AT¹¹M¹ ₂ crystal-chemical group (A = UO ₂ ²⁺ , T¹¹ = CrO ₄ ^2? , M¹ = CH₃CON(CH₃)₂) of uranyl complexes. The chains are linked into a three-dimensional framework due to hydrogen bonds between oxygen atoms of chromate ions and hydrogen atoms of methyl groups of the dimethylacetamide.     

Investigation of environmental and concentration effects on fluorescence properties of AlQ<Subscript>3</Subscript> using mesoporous silica and polyacrylate

In this work, for the first time, control over the position of maximum emission peak for fluorophore, using embedded tris(8-hydroxyquinoline) aluminum (AlQ₃) complexes into different types of host materials, can be achieved. Moreover, the environmental and concentration effects on luminescent properties were studied. In this regard, different concentrations of AlQ₃ were embedded into the poly(methyl methacrylate-co-butyl acrylate) (PMMA-co-PBuA) nanoparticles as organic host materials by emulsion polymerization. It is established that the dilution of AlQ₃ in the polymer matrix leads to blue-shift of the luminescence maximum up to 0.32 eV compared to pure AlQ₃. Moreover, AlQ₃ was embedded in SBA-15 type mesoporous silica as an inorganic host material by physical adsorption. Finally, this functionalized mesoporous silica was incorporated into PMMA-co-PBuA transparent matrix by blending method to obtain Co-Poly-AlQ₃-SBA-15 as organic–inorganic composite material. It was found that there is no significant wavelength shift on the maximum emission peak of the organic–inorganic composite at various concentrations of AlQ₃-SBA-15. The prepared materials were characterized by powder X-ray diffraction (XRD), N₂ adsorption–desorption, NMR, Fourier transform infrared (FT-IR), dynamic light scattering (DLS), scanning electron microscopy (SEM) and fluorescence spectra.     

Synthesis and characterization of the [Ru<Subscript>3</Subscript>O(CH<Subscript>3</Subscript>COO)<Subscript>6</Subscript>(py)<Subscript>2</Subscript>(BPE)Ru(bpy)<Subscript>2</Subscript>Cl](PF<Subscript>6</Subscript>)<Subscript>2</Subscript> dimer

The polymetallic [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl](PF₆)₂ complex (bpy = 2,2′-bipyridine, BPE = trans-1,2-bis(4-pyridil)ethylene and py = pyridine) was assembled by the combination of an electroactive [Ru₃O] moiety with a [Ru(bpy)₂(BPE)Cl] photoactive centre, and its structure was determined using positive ion electrospray (ESI-MS) and tandem mass (ESI-MS/MS) spectrometry. The [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl]²⁺ doubly charged ion of m/z 732 was mass-selected and subject to 15 eV collision-induced dissociation, leading to a specific dissociation pattern, diagnostic of the complex structure. The electronic spectra display broad bands at 409, 491 and 692 nm ascribed to the [Ru(bpy)₂(BPE)] charge-transfer bands and to the [Ru₃O] internal cluster transitions. The cyclic voltammetry shows five reversible waves at −1.07 V, 0.13 V, 1.17 V, 2.91 V and −1.29 V (vs SHE) assigned to the [Ru₃O]^{−1/0/+1/+2/+3} and to the bpy^0/−1 redox processes; also a wave is observed at 0.96 V, assigned to the Ru^+2/+3 pair. Despite the conjugated BPE bridge, the electrochemical and spectroelectrochemical results indicate only a weak coupling through the π-system, and preliminary photophysical essays showed the compound decomposes under visible light irradiation.