Novel repaglinide complexes with manganese(II), iron(III), copper(II) and zinc(II): Spectroscopic,DFT characterization and electrochemical behaviour

Novel transition metal complexes with the repaglinide ligand [2-ethoxy-4-[N-[1-(2piperidinophenyl)-3-methyl-1-1butyl] aminocarbonylmethyl]benzoic acid] (HL) are prepared from chloride salts of manganese(II), iron(III), copper(II), and zinc(II) ions in water-alcoholic media. The mononuclear and non-electrolyte [M(L)₂(H₂O)₂]?nH₂O (M = Mn²⁺, n = 2, M = Cu²⁺, n = 5 and M = Zn²⁺, n = 1) and [M(L)₂(H₂O)(OH)]?H₂O (M = Fe³⁺) complexes are obtained with the metal:ligand ratio of 1:2 and the L-deprotonated form of repaglinide. They are characterized using the elemental and molar conductance. The infrared, ¹H and ¹³C NMR spectra show the coordination mode of the metal ions to the repaglinide ligand. Magnetic susceptibility measurements and electronic spectra confirm the octahedral geometry around the metal center. The experimental values of FT-IR, ¹H, NMR, and electronic spectra are compared with theoretical data obtained by the density functional theory (DFT) using the B3LYP method with the LANL2DZ basis set. Analytical and spectral results suggest that the HL ligand is coordinated to the metal ions via two oxygen atoms of the ethoxy and carboxyl groups. The structural parameters of the optimized geometries of the ligand and the studied complexes are evaluated by theoretical calculations. The order of complexation energies for the obtained structures is as follows:

$$Fe(III) complex < Cu(II) complex < Zn(II) complex < Mn(II) complex.$$

The redox behavior of repaglinide and metal complexes are studied by cyclic voltammetry revealing irreversible redox processes. The presence of repaglinide in the complexes shifts the reduction potentials of the metal ions towards more negative values.

     

Transition metal-chelating surfactant micelle templates for facile synthesis of mesoporous silica nanoparticles

Highly ordered mesoporous silica nanoparticles with tunable morphology and pore-size are prepared by the use of a transition metal-chelating surfactant micelle complex using Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions. These metal ions formed a metal-P123 micelle complex in an aqueous solution, while the metal ions are chelated to the hydrophilic domain such as the poly(ethylene oxide) group of a P123 surfactant. The different complexation abilities of the utilized transition metal ions play an important role in determining the formation of nano-sized ordered MSNs due to the different stabilization constant of the metal-P123 complex. Consequently, from a particle length of 1700 nm in the original mesoporous silica materials, the particle length of ordered MSNs through the metal-chelating P123 micelle templates can be reduced to a range of 180–800 nm. Furthermore, the variation of pore size shows a slight change from 8.8 to 6.6 nm. In particular, the Cu²⁺-chelated MSNs show only decreased particle size to 180 nm. The stability constants for the metal-P123 complex are calculated on the basis of molar conductance measurements in order to elucidate the formation mechanism of MSNs by the metal-chelating P123 complex templates. In addition, solid-state ²⁹Si, ¹³C-NMR and ICP-OES measurements are used for quantitative characterization reveal that the utilized metal ions affect only the formation of a metal-P123 complex in a micelle as a template.     

Formation of negative ions of monosubstituted group VIB pentacarbonyls during fast atom bombardment mass spectrometry

The first negative-ion fast atom bombardment mass spectra of a related series of monosubstituted Group VIB transition metal pentacarbonyls, M(CO)₅L (M = Cr), Mo or W and L = P(Ph)₃, As(Ph)₃ or Sb(PH)₃), have been obtained. Instead of molecular ion radicals, pseudomolecular adduct ions, [M + H]^? and [M + 15]^?, were detected, with the hydride species being much more abundant. High-resolution measurements and comparison of observed isotope clusters with computer-generated theoretical isotope patterns confirmed that ionization occurred by several mechanisms, including electron capture, charge dissociation and formation of adducts with charged species. Fragmentation consisted primarily of elimination of neutral ligands, i.e. ([MH - L]^?, [MH - CO]^?, [MH - 2CO]^?, etc. B/E and constant neutral loss linked scanning with collisional activation were used to confirm fragmentation pathways and characterize the site of hydride attachment on the transition metal complex. The information obtained demonstrates the utility of fast atom bombardment mass Spectrometry in the analysis of metal carbonyls.     

New tripodal N-heterocyclic carbene chelators for small molecule activation

In an effort to develop new tripodal N-heterocyclic carbene (NHC) ligands for small molecule activation, two new classes of tripodal NHC ligands TIME^R and TIMEN^R have been synthesized. The carbon-anchored tris(carbene) ligand system TIME^R (R = Me, t-Bu) forms bi- or polynuclear metal complexes. While the methyl derivative exclusively forms trinuclear 3:2 complexes [(TIME^Me)₂M₃]³⁺ with group 11 metal ions, the tert-butyl derivative yields a dinuclear 2:2 complex [(TIME^t-Bu)₂Cu₂]²⁺ with copper(I). The latter complex shows both “normal” and “abnormal” carbene binding modes and accordingly, is best formulated as a bis(carbene)alkenyl complex. The nitrogen-anchored tris(carbene) ligands TIMEN^R (R = alkyl, aryl) bind to a variety of first-row transition metal ions in 1:1 stoichiometry, affording monomeric complexes with a protected reactivity cavity at the coordinated metal center. Complexes of TIMEN^R with Cu(I)/(II), Ni(0)/(I), and Co(I)/(II)/(III) have been synthesized. The cobalt(I) complexes with the aryl-substituted TIMEN^R (R = mesityl, xylyl) ligands show great potential for small molecule activation. These complexes activate for instance dioxygen to form cobalt(III) peroxo complexes that, upon reaction with electrophilic organic substrates, transfer an oxygen atom. The cobalt(I) complexes are also precursors for terminal cobalt(III) imido complexes. These imido complexes were found to undergo unprecedented intra-molecular imido insertion reactions to form cobalt(II) imine species. The molecular and electronic structures of some representative metal NHC complexes as well as the nature of the metal–carbene bond of these metal NHC complexes was elucidated by X-ray and DFT computational methods and are discussed briefly. In contrast to the common assumption that NHCs are pure σ-donors, our studies revealed non-negligible and even significant π-backbonding in electron-rich metal NHC complexes.     

Effect of stereochemistry on the electrospray ionization tandem mass spectra of transition metal chloride complexes of monosaccharides

The effect of stereochemistry on the complexation of aldohexoses (glucose, mannose, galactose, allose and talose) and ketohexoses (fructose, tagitose and sorbose) with transition metal chlorides (CoCl(2), NiCl(2), MnCl(2) and ZnCl(2)) has been investigated by electrospray ionization tandem mass spectrometry. Electrospray ionization of methanolic solutions of hexoses containing metal chlorides gave abundant ions corresponding to [M + MetCl](+) and [2M + MetCl](+) which on collision-induced dissociation gave characteristic fragment ions. The fragmentation pathways have been confirmed by examining methyl glucoside and several isotopically labeled glucoses. Eliminations of H(2)O and HCl, C-C cleavages and elimination of metalhydroxychloride are the competing fragmentation pathways observed. All these pathways seem to be influenced by the stereochemistry of the molecule. The fragmentation of the dimeric complexes, [2M + MetCl](+), is also controlled by the stereochemistry of the molecule. The abundance of the product ions corresponding to elimination of HCl is found to increase with increasing number of axial hydroxyl groups in aldohexoses. [2M + MetCl](+) dissociates by elimination of HCl followed by C(2)H(4)O(2) in aldohexose complexes and by elimination of HCl followed by C(3)H(6)O(3) in ketohexose complexes.     

Synthesis,characterization, speciation and biological studies on metal chelates of 1-benzoyl(1,2,4-triazol-3-yl)thiourea

Proton-ligand association constants of 1-benzoyl(1,2,4-triazol-3-yl)thiourea (BTTU) and its complex formation constants with some bivalent metal ions Ni(II), Co(II), Mn(II), Zn(II), and Cu(II), have been determined potentiometrically in 50% EtOH–H₂O and 0.1 M NaNO₃. The complexes formed in solution have a stoichiometry of 1:1 and 1:2 [M:L], where M represents the metal ion and L the BTTU ligand. The corresponding thermodynamic parameters are derived and discussed. The complexes are stabilized by enthalpy changes and the results suggest that complexation is an enthalpy-driven process. The effects of metal ion, ionic radius, electronegativity, and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3d transition metals follow the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺. The metal complexes were synthesized and characterized by elemental analyses, conductance, IR, ¹H NMR, and magnetic measurements. The low magnetic moment of 0.11 BM for the Cu(II) complex is suggestive of dimerization through Cu–Cu interaction. The concentration distribution diagrams of the complexes were evaluated. The ligands and their metal complexes have been screened in vitro against some bacteria and fungi.     

Thermal properties of potassium bis(oxalato)diaquochromates(III) in solid state. Trans–cis isomerization of the [Cr(C2O4)2(OH2)2]? complex ion in aqueous solutions

The thermal decomposition of trans-K[Cr(C₂O₄)₂(OH₂)₂]·3H₂O and cis-K[Cr(C₂O₄)₂(OH₂)₂] has been studied using the TG–MS technique. The measurements were carried out in an argon atmosphere over the temperature range of 293–873 K. The influence of the complex structures and configurational geometry on the stability of the transition products and the pathways of thermal transformations has been discussed. Furthermore, the kinetics of the isomerization reactions of the [Cr(C₂O₄)₂(OH₂)₂]⁻ complex ion catalyzed by five different metal ions: Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ have been studied. The isomerization reactions were studied in aqueous solution at five various temperatures (283–303 K), at constant concentration of metal ions (C = 0.1 M) and the constant ionic strength of solution (Na⁺, NO₃ ⁻) I = 2.4 M. The rates of the isomerization reaction were determined spectrophotometrically by monitoring of absorbance changes at 410 nm.     

Sorption of metal ions to untreated,alkali-treated and peroxide-bleached TMP

Knowledge about how different metal ions are bound to pulp fibers is very important for optimal metal management in pulping processes. A column chromatographic method was used to assess the differences in affinity of 14 metal ions to untreated, alkali-treated and peroxide-bleached thermomechanical pulp (TMP). A method of competition between cations in the column chromatographic experiments was used in the sorption experiments, with an excess of each metal ion compared to the total capacity of the pulp studied. The method is very sensitive and even small differences in affinities can be detected. By combining the results from sorption experiments with four different metal ion mixtures the following order of affinity was obtained: Pb²⁺ ≫ Cu²⁺ ≫ Cd²⁺ > Zn²⁺ > Ni²⁺ > Ba²⁺ > Ca²⁺ > Mn²⁺ > Sr²⁺ > Mg²⁺ ≫ Rb⁺ ≈ K⁺ > Na⁺ > Li⁺. All three types of pulps showed the same affinity order. Lead and copper ions were clearly most strongly bound to the pulp fibers. Within the alkali and alkaline earth metal groups the differences in affinity were quite small. The sorption of metal ions to pulp fibers takes place mainly by complexation, where the divalent metal ions are coordinated to functional groups (acid groups) in the fiber phase. Protonation constants and concentrations of acid groups were determined by potentiometric titration. A model with two carboxyl groups and two phenolic hydroxyl groups satisfied best the experimental data. By treatment with alkali and peroxide new acid groups were created and the total binding capacity of hydrogen ions increased from 137 μeq/g for untreated pulp to 187 and 228 μeq/g for alkali-treated and peroxide-treated pulp, respectively.     

A ratiometric chemosensor for fluorescent determination of Hg based on a new porphyrin-quinoline dyad

Quinolin-8-ol p-[10′,15′,20′-triphenyl-5′-porphyrinyl]benzoate (1) was synthesized for the first time and developed as a ratiometric fluorescent chemosensor for recognition of Hg²⁺ ions in aqueous ethanol with high selectivity. The 1–Hg²⁺ complexation quenches the fluorescence of porphyrin at 646 nm and induces a new fluorescent enhancement at 603 nm. The fluorescent response of 1 towards Hg²⁺ seems to be caused by the binding of Hg²⁺ ion with the quinoline moiety, which was confirmed by the absorption spectra and ¹H NMR spectrum. The fluorescence response fits a Hill coefficient of 1 (1.0308), indicating the formation of a 1:1 stoichiometry for the 1–Hg²⁺ complex. The analytical performance characteristics of the chemosensor were investigated. The sensor shows a linear response toward Hg²⁺ in the concentration range of 3 × 10⁻⁷ to 2 × 10⁻⁵ M with a limit of detection of 2.2 × 10⁻⁸ M. Chemosensor 1 shows excellent selectivity to Hg²⁺ over transition metal cations except Cu²⁺, which quenches the fluorescence of 1 to some extent when it exists at equal molar concentration. Moreover, the chemosensor are pH-independent in 5.0–9.0 and show excellent selectivity for Hg²⁺ over transition metal cations.     

Evaluation of metal complexation as an alternative to protonation for electrospray ionization of pharmaceutical compounds

The use of pyridyl and polyether compounds as auxiliary ligands to promote metal complexation of a series of pharmaceutical analytes by electrospray ionization (ESI) is explored as an alternative to conventional protonation by ESI. The auxiliary ligands vary in the number and nature of binding sites, the orientation of the binding sites with respect to each other, and the conformational flexibility of the ligand during complexation of the metal ion. The ESI of ternary solutions composed of a pharmaceutical substrate, a transition metal ion salt, and an auxiliary complexation agent generate metal complexes of the type [(L-H⁺)M^II(aux)]⁺, where L is the pharmaceutical, M is either copper, nickel, or cobalt, and aux is the auxiliary ligand. Overall, the pyridine-type ligands are more useful for the generation of ternary metal complexes than the polyether-type ligands, which preferentially complex sodium ions and, upon collisional activation, undergo fragmentation of the polyether skeleton in addition to the structurally informative dissociation of the analytes. The auxiliary ligand that exhibits the best performance is 2,2′-dipyridine; its ternary metal complexes enhance the structural characterization of five of the pharmaceuticals by promoting a greater number of fragments relative to the CAD patterns of the protonated substrates.     

Europium (III) and Uranium (VI) complexation by natural organic matter (NOM): Effect of source

For the safe long‐term storage of high‐level radioactive waste (HLW), detailed information about geo‐chemical behavior of radioactive and toxic metal ions under environmental conditions is important. Natural organic matter (NOM) can play a crucial role in the immobilization or mobilization of these metal ions due to its complexation and colloid formation tendency. In this study, the complexation of europium (as chemical homologue of trivalent actinides such as americium) and uranium (as main component of HLW) by ten humic acids (HA) from different sources and Suwannee NOM river extract has been analyzed. Capillary electrophoresis in combination with inductively coupled plasma mass spectrometry has been used for the evaluation of complex stability constants log β. In order to determine the complex stability constants a conservative single site model was used in this study. In dependence of their source and thus of NOM structure the log β values for the analyzed humic acids are in the range of 6.1–7.0 for Eu(III) and 5.2–6.4 for U(VI) (UO₂²⁺), respectively. In contrast to the results for HA the used Suwannee river NOM reveals log β values in the range of nearly two orders of magnitude lower (4.6 for Eu³⁺ and 4.5 for UO₂²⁺) under the geochemical conditions applied in this study.     

Steric interaction of solvation and sterically enhanced halogeno complexation of manganese(II), cobalt(II) and nickel(II) ions inN,N-dimethylacetamide

The complexation of manganese(II), cobalt(II) and nikel(II) with bromide ions has been studied in N,N-dimethylacetamide(DMA) by calorimetry and spectrophotometry. The formation of [MBr]⁺, [MBr₂] and [MBr₃]^– (M=Mn, Co, Ni) was revealed in all the metal systems. Interestingly, the complexation is significantly enhanced in DMA over N,N-dimethylformamide (DMF). This is unusual because physicochemical properties of DMA and DMF as solvent are similar. Furthermore, extracted electronic spectra of individual complexes of Ni^II suggested the presence of a geometry equilibrium, [NiBr(DMA)₅]⁺=[NiBr(DMA)₄]⁺+ DMA, in DMA. A similar geometry equilibrium is also suggested, [NiBr₂(DMA)₃]=[NiBr₂(DMA)₂]+DMA. Such geometry equilibria were not observed in DMF. With regard to cobalt(II), electronic spectra show the presence of the four-coordinated [CoBr(DMA)₃]⁺ complex in DMA, unlike the six-coordinated [CoBr(DMF)₅]⁺ one in DMF. These facts suggest that a specific strong steric interaction operates between coordinating solvent molecules, which plays a key role in the complexation behavior of the divalent transition metal ions in DMA.     

Collisional activation spectra of the adduct ions of 1,2,3-triarylpropenones under ammonia chemical ionization conditions

Under ammonia chemical ionization (CI) conditions triarylpropenones undergo hydrogen radical-induced olefinic bond reduction on metal surfaces, resulting in [M + 2H + NH₄]⁺ ions corresponding to the ammonium adduct of the saturated ketone. The decomposition of the adduct ions, [MNH₄]⁺ and [M + 2H + NH₄]⁺, was studied by collision-induced dissociation mass-analysed ion kinetic energy (CID-MIKE) spectroscopy in a reverse geometry instrument. From the CID-MIKE spectra of the [MNH₄]⁺, [M + 2H + NH₄]⁺, [MND₄]⁺ and [M + 2D + ND₄]⁺ ions it is clear that the fragmentation of the adduct ions involves loss of NH₃ followed by various cyclization reactions resulting in stable condensed ring systems. Elimination of ArH and ArCHO subsequent to the loss of NH₃ and formation of aroyl ion are characteristic decomposition pathways of the [MNH₄]⁺ ions, whereas elimination of ArCH₃ and formation of [ArCH₂]⁺ are characteristic of the [M + 2H + NH₄]⁺ ions of these propenones.     

Metal Complexes with Macrocyclic Ligands. XV. The Complexation Kinetics of Open Chain and Cyclic Tetraazaligands with Ni2+ in DMSO and DMF

The complexation kinetics of 2,6,9, 13-tetraazatetradecane (1) , 1,4,8, 11-tetraazacyclotetradecane (2) and N,N′,N″,N'-tetramethyl-1,4,8, 11-tetraazacyclotetradecane (3) with Ni²⁺ were studied by the stopped-flow technique in DMSO and DMF. The biomecular rate constants k_L^Ni (Table 2) follow in both solvents the order 1 ? 2 > 3. The similar complexation rates of 1 and 2 in their unprotonated form indicate that for both the open chain and the cyclic ligand the same mechanism holds. By comparison with the solvent exchange the rate determining step of the complexation is the dissociation of the first solvent molecule in the outer-sphere complex. The lower reactivity of 3 is probably due to steric effects. In the case of 2 a second step in the complexation process was observed and explained by a rearrangement of the ligand already coordinated to the metal ion.     

Study of diketone/metal ion complexes by electrospray ionization mass spectrometry: Influence of Keto-Enol tautomerism and chelation

The formation and collisionally activated dissociation (CAD) behavior of a series of complexes containing cyclic or linear diketone ligands and alkali, alkaline earth, or transition metal ions are investigated. Electrospray ionization (ESI) is utilized for introduction of the metal ion complexes into a quadrupole ion trap mass spectrometer. The proximity of the carbonyl groups is crucial for formation and detection of ion complexes by ESI. For example, no metal ion complexes are observed for 1,4-cyclohexanedione, but they are readily detected for the isomers, 1,2-and 1,3-cyclohexanedione. Although the diketones form stable doubly charged complexes, the formation of singly charged alkaline earth complexes of the type (nL + M²⁺ ? H⁺)⁺ where L = 1,3-cyclohexanedione or 2,4-pentanedione is the first evidence of charge reduction. CAD investigations provide further evidence of charge reduction processes occurring in the gas-phase complexes. The CAD studies indicate that an intramolecular proton transfer between two diketone ligands attached to a doubly charged metal ion, followed by elimination of the resulting protonated ligand, produces the charge reduced complex. For transition metal complexation, the preference for formation of doubly charged versus singly charged complexes correlates with the keto-enol distribution of the diketones in solution.     

Mechanism of Metal Ion Catalysis in the dissociation of cis-diaquobisoxalatochromate(III) ion

The metal ion (M²⁺) catalysed dissociation of cis-diaquobisoxalatochromate into the tetraaquomonooxalato complex in aqueous perchloric acid medium which follows the rate law — d(complex)/dt = {k_H[H⁺] + k_M[M²⁺]}[complex] has been studied. Based on k_M values the order of catalysing effect of the different metal ions studied is Cu²⁺ > Ni²⁺ > Co²⁺ > Mn²⁺, which is also the order of stabilities (K_MOx) of the monooxalato complexes of these metal ions; in fact the plot of log k_M vs. log K_MOx is linear. This together with the relative values of ΔH^≠ and ΔS^≠ for the H⁺ catalysed and M²⁺ catalysed paths is in agreement with a mechanism involving chelation of the catalysing cation through the free carbonyl oxygens of the oxalate ligand bound to Cr(III), followed by the dissociation of the Cr(III)? O bonds with simultaneous entry of two water molecules into the coordination sphere of Cr(III).     

Thermodynamics of Dissociation and Metal Complexation of 3-Nitro-1,5-Diphenylformazan

Thermodynamic parameters for dissociation of 3-nitro-1,5-diphenylformazan and its complexation by some divalent metal ions were determined in a 50%(v/v) dioxane–water mixture at constant ionic strength (0.1 M KCl) using an automatic potentiometric technique. The changes in the standard Gibbs energy ΔG^o and enthalpy ΔH^o accompanying the complexation were found to decrease with increasing metal ionic radius and to increase with the electronegativity, the ionization enthalpy, and the enthalpy of hydration. The order of ?ΔG^o and ?ΔH^o values were found to be Mn²⁺ < Fe²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺, in accordance with the Irving–Williams order. The complexes were stabilized by both enthalpy and entropy changes and the results suggest that the complexation is an enthalpy-driven process. The transition-series contraction energy E_r(Mn–Zn) and the ligand field stabilization energy δ H were calculated from the enthalpy changes.     

Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

Metal exchange kinetics: uncatalyzed replacement of Ni(II) from tetramethylenediaminetetraacetatonickel(II) complex by Cu(II)

The kinetics of metal exchange between copper(II) and tetramethylenediaminetetraacetatonickel(II), [Ni(TMDTA)] has been studied between pH 3.4 and 4.8 at an ionic strength of 1.25 M (NaClO₄) and a temperature of 25.0 ± 0.1 °C. The reaction is first order in [Ni(TMDTA)]. The reaction order in [Cu²⁺] varies from first to zero and then back to first as [Cu²⁺] is increased. At low copper concentration, the first-order rate constant is pH independent and represents the attack of copper on the nickel complex through a pathway in which TMDTA is partially uncoordinated before reaction with copper. Evidence is presented for a stepwise dechelation mechanism followed by attack of copper to give a dinuclear intermediate. The zero-order rate is pH dependent. At higher [Cu²⁺], the swing back to first order is due to the formation of a weak copper-tetramethylenediaminetetraacetatonickelate complex which then converts to products through a dinuclear intermediate. A plausible mechanism, consistent with all the kinetic data, is presented.