Kinetics of adsorption of polyvinylamine on cellulose fibers. II. Adsorption from electrolyte solutions

Adsorption from electrolyte solutions of fully hydrolyzed polyvinylamine on cellulose fibers was investigated by supplying the polymer to the fibers at controlled rate. This was implemented by employing a reactor only open to the fluid in which the fiber dispersion were confined and homogenized. The adsorbed layers may be defined as diffuse or dense layers. Diffuse layers are characterized by a surface coverage limited to 0.65 mg/g cellulose in salt-free solutions. Addition of NaCl or CaCl(2) to the fiber dispersion and the polymer solution promotes the adsorption rate and increases the amount of adsorption to 1.5 mg/g cellulose. For dense polymer layers, for which the coverage amounts to values close to 10 mg/g cellulose in salt-free systems, addition of electrolyte does not change the kinetic and adsorption characteristics. Insofar as the variation of the molecular areas of the polymer within the diffuse layers as a function of the ionic strength parallels the variation of the molecular characteristics of solute molecules, the formation of diffuse layers is expected to proceed by random deposition of solute molecules which later individually sustain strong reconformation. Adsorption isotherms show a limited influence of the ionic strength. Obviously, the passage from dense layers of high surface coverage to low adsorption values at equilibrium requires extended reconformation of adsorbed macromolecules and desorption of a great part of the molecules already adsorbed.     

Hydrodynamically induced formation of cellulose fibers. I. Observations on the formation of cellulose fibers from stirred solutions

Like synthetic polymers, a natural polymer such as cellulose may crystallize in fibrous form from stirred solutions. In the present work, it is demonstrated that cellulose fibers can be formed by precipitation from dimethyl sulfoxide/paraformaldehyde solutions by two methods that involve different mechanisms of fiber formation, viz., (A) precipitation of cellulose by addition of nonsolvent to the stirred cellulose solution, and (B) precipitation of cellulose by coagulation of droplets of cellulose solution in a stirred precipitant. Both processes yield fibers with properties depending on the stirring speed and the coagulant strength. The molecular orientation and tensile strength of the fibers produced by method A was low, but increased with the stirring speed, while some fibers formed by method B reached extremely high orientation, depending on the thickness of the fibers. The two mechanisms of fiber formation are discussed on the basis of the experimental observations.     

Kinetics of adsorption from micellar solutions

Previous studies on surfactant adsorption mostly deal with dilute systems without aggregation in the bulk phase. At the same time, micellar solutions can be more important from the point of view of applications. If one attempts to estimate the equilibrium adsorption, neglecting the influence of micelles can lead to reasonable results. The situation differs for non-equilibrium systems when the adsorption rate can increase by an order of magnitude at the increase of the surfactant concentration beyond the CMC. A critical survey of various models describing the influence of micelles on adsorption kinetics at the liquid-gas interface is given and the theoretical results are compared with existing experimental data. The theories proposed for the case of large deviations from the equilibrium are usually based on some unjustifiable assumptions and can describe the kinetic dependencies of adsorption in only a limited number of situations. Consequently, only rough estimates of the kinetic coefficients of micellization can be obtained from experimental data on dynamic surface tension. More rigorous equations can be derived if the system only deviates slightly from equilibrium. In the latter case, the agreement between theoretical and experimental results is essentially better and measurements of the dynamic surface elasticity of micellar solutions allow us to study the micellization kinetics.     

亚砜类非离子型表面活性剂在固/液界面上的吸附I: 硅胶/水溶液界面上的吸附

测定了癸基和辛基-甲亚基亚砜在硅胶/水溶液界面的吸附以及溶液在石英界面的接触角. 研究了温度和pH值对吸附的影响. 吸附等温线似应归入Giles分类的L4型. 饱和吸附层的平均分子面积为27-30A^2. 二个同系物的γ/γ-c/cmc曲线彼此重叠. 吸附温度系数在低浓度范围是负性的在高浓度范围是正性的. 接触角的测量表面吸附使硅胶表面疏水. 从实验结果考虑到吸附过程由二个阶段组成: 一是在低浓度范围由固体表面和亚砜基之间的相互作用, 另一过程是在高浓度范围中, 被吸附的表面活性剂分子及其在溶液中的疏水作用.     

Reconformation of polyvinylamine adsorbed on glass fibers

Surface area exclusion chromatography was used to investigate the reconformation of fully hydrolyzed polyvinylamine. The polymer is adsorbed on stacked glass fiber filters constituting the stationary phase while the polymer solution is injected at the inlet of the chromatography column. From numerical simulation and experimental chromatograms of nonreconforming polyelectrolytes, the amount of polymer adsorbed per filter represented as a function of the filter position along the column (the histogram) was determined to be continuously decreasing and not to depend on the rate of elution. For polyvinylamine, the histograms are peaked and the height of the peak was determined to depend greatly on the rate of polymer supply to the column that was controlled by monitoring the polymer concentration and/or the rate of elution (mass-transfer-controlled adsorption). Modifications in the adsorption on the successive filters were converted into changes in the interfacial area of adsorbed molecules taking into account model histograms as well as experimental adsorption histograms of non reconforming systems. Macromolecule concentration in the mobile phase and contact time between solute and adsorbed molecules were determined to be the two parameters controlling the extent of polymer desorption. The unusual shape of the histogram thus was attributed to reconformation of the adsorbed polymer, which was stimulated by interfacial exchange between segments belonging to trains of adsorbed macromolecules and chain segments of solute ones.     

Isotherms of adsorption of aromatic compounds on cellulose from heptane-isopropanol solutions

The isotherms of adsorption of benzene, anisole, benzyl alcohol, and benzaldehyde on the surface of microspherical mesoporous crosslinked cellulose were calculated from the chromatographic peaks of these compounds with consideration given to the longitudinal smearing of the analyte zone under the action of adsorption forces. The solvents were n-heptane-isopropanol mixtures containing various amounts of isopropanol (up to 2 vol %). The adsorption isotherms were described using equations of the displacement adsorption theory. The mechanism of the sorption of aromatic compounds and the physical meaning of the constants entering into the adsorption isotherm equation were discussed.     

Kinetics of heterogeneous cellulose reactions. I. Cyanoethylation of cotton cellulose

Sakurada's equation and fundamental kinetic laws were applied to the heterogeneous cyanoethylation of cellulose, performed by reacting fiber with liquid acrylonitrile, with sodium hydroxide as the catalyst. The data fit Sakurada's equation better at higher temperatures; deviation occurs at the initial stage, and the rate of reaction falls abruptly at a later stage. The degree of substitution at which the abrupt rate change occurred decreased as the temperature increased from 31 to 60°C. and also as the crystallinity of the fiber decreased. Diluting the reagent with different solvents decreased the rate of reaction and changed its transition points, but did not change the essential nature of the reaction, each segment of which fits Sakurada's equation very well. A uniform distribution of the catalyst (sodium hydroxide) throughout the fiber was attempted, and then the reaction was studied at 50°C. Diffractograms of the samples provided further evidence that the position of the rate change is associated with the change of cellulose (I) crystalline structure. Approximate energy of activation has been calculated, from the specific rate constants, between 31 and 40°C. as 10.6 kcal. and between 45 and 50°C. as 16.7 kcal. At other temperatures the determination was handicapped, due to temperature dependence of the order of reaction. An empirical relation between the constants of Sakurada's equation and the reaction temperature has been sought and correlated with the Arrhenius equation. Energies of activation, determined from this relationship, have been found to be very close to the above values. The change of order of reaction with temperature suggests that the reaction is affected by diffusion and the mechanism is interpreted as a diffusion-controlled reaction where hydrogen bonds play a significant role in diffusion.     

Kinetics and thermodynamics of adsorption of congo red on cellulose

Thermodynamics and kinetics of adsorption of congo red (CR) on cellulose are studied at 308–328 K. In the used concentration range of CR, interaction of CR with cellulose is exothermic and CR molecules adsorb chemically on cellulose surface. The effects of contact time, temperature and initial concentration of CR on kinetics of its adsorption on cellulose were investigated. The process proceeds according to the pseudo-second-order equation. Initial adsorption rate of adsorption is first-order in CR and the intraparticle diffusion of CR molecules within cellulose is identified as the main rate-limiting step.      

Kinetics of chromium(VI) adsorption from model solutions on iron oxide

Adsorption of Cr(VI) on Fe₂O₃ from model solutions with various Cr(VI) concentrations was studied. The adsorption capacity was determined, the constants of chromium(VI) adsorption on iron(III) oxide for the pseudo-second-order model were calculated, and the diffusion coefficients for the process were evaluated.     

Adsorption of phenol and toluene from the gas phase and aqueous solutions on cellulose

Adsorption of toluene and phenol from the gas phase and aqueous solutions on various celluloses was studied.     

Adsorption of iodine from aqueous solutions by samples of tire yarn from regenerated cellulose

The adsorption of iodine by rayon tire yarn samples from aqueous solutions in which the concentration of iodide and triiodide ions is suppressed was studied. Fowler and Guggenheim's model of adsorption on regular localized monolayers appeared to be applicable to the adsorption phenomena considered. It is concluded that adsorption takes place on patches of sites in the cellulose–water gel.     

Preparation of novel antimicrobial-modified starch and its adsorption on cellulose fibers: Part I. Optimization of synthetic conditions and antimicrobial activities

Antimicrobial-modified starch was synthesized by covalently bonding guanidine polymer (PHGH) with potato starch via coupling reaction. Orthogonal tests were applied to optimize the reaction conditions. The coupling efficiency could reach 90.21% at the optimal conditions: temperature, 70 °C; time, 2 h; PHGH/starch, 120 wt.%; GDE/starch, 8 wt.%; pH, 11. PHGH modified starches exhibited high antimicrobial activities against both E. coli and S. aureus. Shaking flask method was more suitable for current non-released modified starches than diffusion method to evaluate the antimicrobial activities. In the presence of 1.0 wt.% PHGH in wood fibers, the growth inhibition reached almost 100%. The AFM results also demonstrated that the antimicrobial mechanism of PHGH was to destroy the membrane of the cells.     

Silane adsorption onto cellulose fibers: hydrolysis and condensation reactions

The hydrolysis of three alkoxysilane coupling agents, gamma-methacryloxypropyltrimethoxysilane (MPS), gamma-aminopropyltriethoxysilane (APS), and gamma-diethylenetriaminopropyltrimethoxysilane (TAS), was carried out in an ethanol/water (80/20) solution and followed by 1H, 13C, and 29Si NMR spectroscopy, which showed that its rate increased in the order MPS < APS < TAS. The formation of the silanol groups was followed by their self-condensation to generate oligomeric structure. APS and MPS only gave soluble products, whereas colloidal particles precipitated in the medium when TAS was hydrolyzed. Pristine and hydrolyzed MPS were then adsorbed onto a cellulose substrate and thereafter a thermal treatment at 110-120 degrees C under reduced pressure was applied to the modified fibers to create permanent bonding of the coupling agent at their surface.     

The adsorption of n-decane on the surface of water-swollen cellulose fibers

Finite-concentration gas-solid chromatography is used to monitor changes in the surface area and adsorptive properties of cellulose fibers as a function of relative humidity, by measuring the adsorption isotherms for decane at several partial pressures of water vapor.     

Synthesis and characterization of carboxymethylcelluloses (CMC) from non-wood fibers I.Accessibility of cellulose fibers and CMC synthesis

This paper explores the production of carboxymethylcellulose (CMC) fromseveral bleached cellulose pulps obtained from non-wood species. The chemicalcomposition (-cellulose, hemicellulose and lignin content), the degreeofswelling, viscosity, solubility in concentrated NaOH and crystallinity ofsoda/AQ cellulose pulps from abaca, jute, sisal, linen and Miscanthussinensis were determined. The pulps were carboxymethylated by one andtwo successive reaction steps in aqueous medium under identical conditions. Thedegree of substitution (DS) of CMC was found to be dependent upon the source ofthe cellulose pulp, but generally it was close to 1 with one etherificationtreatment and around 2 after the second. The molar mass of CMC was found to bedependent on the initial intrinsic viscosity of the cellulose pulp. The weightaverage molar mass of our CMCs ranged from 1.5×10⁵ to2.8×10⁵. Increasing the DS up to 2 improved the CMC solubility, butviscosity slightly decreased due to a slight degradation of the polymer.     

Phase transitions in cellulose solutions. The kinetics of precipitation of cellulose from diluted cadoxen solutions

Solutions of cellulose (degree of polymerization: 296 ± 16) in tris(ethylenediamine)cadmium(II)hydroxide-ethylenediamine-water (cadoxen), 1.015% (weight per volume) were diluted 1:1.5 with water. The ensuing isothermal precipitations were followed dilatometrically at temperatures ranging from 27.50 to 48.45°C. The precipitation data were characterized by a positive temperature coefficient. They generally conformed to a one-dimensional nucleation rate law; the Avrami exponents were close to unity. Alternatively, they fit a first-order reaction rate expression with respect to cellulose concentration. The low crystallinity of the precipitated cellulose leads to the interpretation of the kinetics in terms of the dissociation of a cellulose-cadoxen complex, rather than phase separation, as the rate-determining step. The nucleation rate law suggests a one-dimensional nonrandom cooperative chemical process, while the first-order rate law suggests a random process.     

Mesoporous structures in never-dried softwood cellulose fibers investigated by nitrogen adsorption

Nitrogen adsorption was used to characterize mesoporous structures in never-dried softwood cellulose fibers. Distinct inflections in desorption isotherms were observed over the relative vapor pressure (P/P₀) range of 0.5–0.42 for never-dried cellulose fibers and partially delignified softwood powders. The reduction in N₂ adsorption volume was attributed to cavitation of condensed N₂ present in mesopores formed via lignin removal from wood cell walls during delignification. The specific surface areas of significantly delignified softwood powders were ~150 m² g^?1, indicating that in wood cell walls 16 individual cellulose microfibrils, each 3–4 nm in width, form one cellulose fibril bundle surrounded with a thin layer of lignin and hemicelluloses. Analysis of N₂ adsorption isotherms indicates that mesopores in the softwood cellulose fibers and partially delignified softwood powders had peaks ranging from 4 to 20 nm in diameter.     

Photocrosslinkable vinylamine copolymers. I. Synthesis and photosensitivity of cinnamoylated polyvinylamine

Vinylamine copolymers prepared by the Hofmann reaction were functionalized by amidification with cinnamoyl chloride. The resulting photosensitive polymers, which are the nitrogen analogues of poly(vinylcinnamate), can be prepared with various contents of cinnamamide side groups. The polymers exhibit a marked hydrophilicity and undergo efficient crosslinking upon exposure to 250–300 nm UV light. The sensitivity S expressed in cm²·J⁻¹ was shown to be higher for a given content, τ, in cinnamamide groups expressed in mol·g⁻¹ when the residual vinyl amine units are in the ammonium form. The dependence of S upon τ was of the second order for the free base form of the photopolymers, but a higher order with S approximately proportional to τ³ for the hydrochloride form of the photosensitive polymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2513–2520, 1997