L-酪氨酸甲酯消旋及Alcalase 2.4L催化对映选择性水解制备D-酪氨酸

提出了一个5-硝基水杨醛催化L-酪氨酸甲酯消旋化的新方法并推测了L-酪氨酸甲酯的消旋机理.在乙腈/磷酸盐缓冲液(pH 7.5)中,5-硝基水杨醛催化L-酪氨酸甲酯消旋为DL-酪氨酸甲酯,消旋率100%,消旋收率93%.优化了Alcalase 2.4L催化DL-酪氨酸甲酯对映选择性水解的反应条件.30℃下,在叔丁醇/磷酸盐缓冲液(pH 7.5)中,Alcalase 2.4L催化DL-酪氨酸甲酯对映选择性水解为L-酪氨酸和D-酪氨酸甲酯.在酶催化水解过程中,L-酪氨酸形成沉淀,容易通过简单的过滤进行分离.D-酪氨酸甲酯在碱性条件下水解为D-酪氨酸,收率91%,ee97%.     

用嗜热菌蛋白酶催化合成天冬甜精并同时进行DL-苯丙氨酸甲酯的光学拆分

以DL-苯丙氨酸甲酯作原料,利用嗜热菌蛋白酶和固定化嗜热菌蛋白酶催化合成了天冬甜精,经拆分得到D-苯丙氨酸甲酯。实验结果表明,不仅天冬甜精产率高,而且D-苯丙氨酸甲酯的回收率好,光学纯度高。     

手性催化剂环二肽类化合物的微波合成

以L-苯丙氨酸或L-亮氨酸为起始原料,经过氨基保护和羧基酯化得到N-苄氧羰基-L-广苯丙氨酸-对硝基苯酯(4a)或N-苄氧羰基-L-亮氨酸-对硝基苯酯(4b);4在三乙胺作用下与L-组氨酸甲酯盐酸盐缩合得到直链二肽N-苄氧羰基-L-苯丙氨酸-L-组氨酸甲酯(5a)或N-苄氧羰基-L-亮氨酸-L-组氨酸甲酯(5b);Pd/C催化5脱掉保护基后在微波辐射下,经环化反应合成了手性催化剂环二肽(6a或6b),其结构经1H NMR和IR表征.重点考察了由5合成6的反应条件.结果表明,以甲醇为溶剂,于65 W辐射120 min,6a和6b的产率分别达到90%和68%.     

过渡金属乙烯齐聚与聚合催化剂研究进展

综述了近年来过渡金属配合物催化乙烯齐聚与聚合的最新进展;介绍了乙烯齐聚或聚合的反应时间、反应温度、乙烯压力、助催化剂用量等反应条件及配体上不同取代基对前过渡金属(铬,锆,钛,钒)和后过渡金属(铁,钴,镍,铜)配合物的催化活性和齐聚或聚合产物的影响;分别以钛和镍配合物催化剂为例,介绍了前过渡金属和后过渡金属催化乙烯齐聚或聚合的机理。     

酶催化生物可降解聚酯的合成与研究进展

生物可降解聚酯是一种新型高分子聚合材料,可通过发酵、化学方法和酶催化来合成.本文综述了酶催化下通过缩聚、酯交换、内酯开环聚合等方法合成此类聚酯.酶催化合成生物可降解聚酯是一种新型的技术,可以在温和条件下高效合成,有着传统方法难以比拟的优势.     

后过渡金属配合物催化乙烯齐聚与聚合的研究进展

后过渡金属配合物催化乙烯齐聚和聚合研究,不仅拓展了后过渡金属配合物的应用 ,而且为探求烯烃聚合催化剂提供了新机遇,成为当前催化研究中的热点课题.本文综述了后过渡金属铁、钴、镍配合物催化乙烯齐聚和聚合的国内外最新研究进展.     

菠萝蛋白酶催化大豆蛋白水解反应的热动力学

利用热活性检测仪测定了菠萝蛋白酶催化大豆蛋白水解反应的热功率-时间曲线,按照热动力学理论和对比进度法解析出不同温度、酸度时菠萝蛋白酶催化大豆蛋白水解反应的米凯利斯常数（K_m）和最大速率（V_max）,并建立了K_m与温度和酸度的关系式,从而获得酶催化反应的最适温度（314.63 K）和最适pH（6.99）. 在最适温度和最适pH条件下,测定了金属离子可逆竞争时菠萝蛋白酶催化大豆蛋白水解反应的热功率-时间曲线,对曲线进行处理,得到了酶催化反应的米凯利斯常数（K_m’）和最大速率（V_max’）. 建立了K_m’与金属离子浓度间的关系式,比较了金属离子对酶催化反应的激活或抑制效果.     

菠萝蛋白酶催化合成寡聚L-酪氨酸

以菠萝蛋白酶为催化剂从L-酪氨酸甲酯聚合得到寡聚L-酪氨酸(O-L-Try)。 以0.8 U/mL蛋白酶在体积分数为7.5%的二甲亚砜(DMSO)缓冲液(pH=7.5,0.2 mol/L)中催化0.23 g/mL L-酪氨酸甲酯在50 ℃下聚合反应5 h后,O-L-Try产率达到65%。 通过基质辅助激光解吸电离飞行时间质谱(MALDI-TOF-MS)、氢核磁共振波谱仪(¹H NMR)、拉曼光谱、傅里叶变换红外光谱仪(FTIR)等技术手段表征了O-L-Try结构和性能特征。 结果表明,MALDI-TOF-MS测定的O-L-Try的聚合度主要为10。 ¹H NMR谱图分析得到的O-L-Try的平均聚合度为8。 拉曼光谱显示,O-L-Try的肽键特征峰位于1623 cm^-1(酰胺Ⅰ带)、1447 cm^-1(酰胺Ⅱ带)、1270 cm^-1(酰胺Ⅲ带)和648 cm^-1(酰胺Ⅳ带)。     

生物柴油的催化改性对其冷滤点的影响

利用HZSM-5型分子筛作为催化剂,在250℃～350℃、0.01MPa～0.04MPa的条件下,对生物柴油的主要组分油酸甲酯、棕榈酸甲酯、硬酯酸甲酯、亚油酸甲酯、月桂酸甲酯进行催化改性,以达到降低生物柴油冷滤点（CFPP）的目的。实验研究了反应温度和反应真空度对各脂肪酸甲酯产物的冷滤点、结炭率、碘值的影响,以该实验数据为依据,将动物油经过酯交换制备的生物柴油（AFE）进行催化改性。结果表明,在300℃~350℃,对饱和脂肪酸甲酯改性有很好的降凝效果,产物碘值升高;油酸甲酯通过改性,也取得了很好的降凝效果,产物碘值下降,在该反应条件下改性饱和脂肪酸甲酯和油酸甲酯催化剂的结炭率保持在5%以下;而亚油酸甲酯仅在350℃时改性才有降凝效果,且结炭率在10%以上。生物柴油（AFE）催化改性达到最佳降凝效果的条件为300℃~325℃,0.01MPa,改性后的的酸值小于0.6mg/g,冷滤点下降了19℃,碘值（I.V）为44.32g/100g,运动黏度（μ_t）为4.397mm²/s,并且催化剂结炭率保持在5%以下。     

气浮络合萃取分离富集L-苯丙氨酸的研究

结合溶剂浮选和络合萃取,提出了气浮络合萃取(floatation complexation extraction)的概念,应用该方法实现了对L-苯丙氨酸的分离富集。在试液的pH为11、NaCl浓度为0.20 mol/L、有机相为80%P204的正己烷溶液、通气流速为40 mL/min、通气时间为60 min的条件下对水相中L-苯丙氨酸进行气浮络合萃取。在分离富集的基础上,用pH<1的HCl水溶液对L-苯丙氨酸进行反萃取,通过紫外和红外光谱分析,确认了分离产物为L-苯丙氨酸。     

Branching of anionic poly(methyl methacrylate)

A viscometric determination of the degree of branching γ, of poly(methyl methacrylate) obtained by anionic polymerization proved the reaction of the growing center of poly(methyl methacrylate) with the ester group of another polymer molecule, accompanied by the formation of a trifunctional branch point. This reaction occurs if the solution polymerization of methyl methacrylate is initiated: (1) with butyllithium at ?78°C only on attaining 100% conversion and after a long time or at +20°C immediately after the polymerization has set in; (2) with lithium tert-butoxide at +20°C after a long time. The degree of branching of poly(methyl methacrylates) obtained under similar conditions in the presence of tetrahydrofuran reaches higher values than for polymers prepared in toluene. The tacticity of polymers does not affect the experimentally determined γ values.     

酸性离子液体催化脂肪酸甲酯聚合制备二聚酸甲酯

 以 Brönsted-Lewis 酸性离子液体为催化剂, 用于催化生物柴油中不饱和脂肪酸甲酯聚合制备二聚酸甲酯反应, 考察了催化剂种类、催化剂用量、反应温度和时间等因素对聚合反应性能的影响, 得到较佳的反应条件. 结果表明, 当以 1-(3-磺酸)-丙基-3-甲基咪唑氯锌酸盐[HO3S-(CH2)3-mim]Cl-ZnCl2 (ZnCl2 摩尔分数为 0.67) 为催化剂, 生物柴油 15 g, m(生物柴油):m(离子液体) = 15:1, 于 240 oC 下反应 6 h 时, 二聚酸甲酯收率为 63.2%, 其中三聚体含量小于 5%. 另外, 该催化剂重复使用 5 次后, 二聚酸甲酯收率仍超过 63%, 表明其具有较好的重复使用性能. 离子液体的 Brönsted 和 Lewis 酸位的协同效应显著提高了其催化活性.     

Polymerization of 2,5‐diaminoterephthalic acid‐type monomers for the synthesis of polyamides containing ladder unit

To synthesize ladder‐type polyamides by construction of two amide bonds successively, 2,5‐diaminoterephthalic acid derivatives bearing anthranilic acid ester and isatoic anhydride moieties were synthesized and their polymerization was investigated. Polymerization of the methyl ester monomer proceeded in the presence of lithium hexamethyldisilazide (LiHMDS) as a base in tetrahydrofuran (THF). However, mass spectroscopic analysis of the product suggested that not only the bis(trimethylsilyl)amide anion of LiHMDS but also the methoxide anion eliminated at the second amide‐linkage formation reaction decomposed the isatoic anhydride unit of the growing oligomer by nucleophilic attack to disturb the polymerization. To reduce the nucleophilicity of the eliminated anion, methyl ester of the monomer was changed to phenyl ester and its polymerization was studied. The reaction conditions were optimized, and the best result was obtained when the polymerization was conducted in the presence of 1.0 equivalent of LiHMDS without additives in THF at 50 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2365–2372     

磺酸功能化离子液体催化3-羟基丙酸甲酯酯交换聚合反应

以磺酸功能化咪唑离子液体为催化剂,以3-羟基丙酸甲酯为原料,采用自身酯交换法合成了具有生物可降解性能的聚羟基脂肪酸酯.系统考察了离子液体种类、反应温度以及聚合反应时间对反应性能的影响,同时采用红外、核磁、热分析等手段对产物进行表征.研究结果表明:阴离子为CF3SO-3的磺酸功能化离子液体在120℃的低温下催化聚合反应所得聚酯Mw可达10 159,收率82.1%;通过水洗方法可有效去除产物中的离子液体催化剂,从而避免催化剂污染产物.     

废动植物油脂制备烷醇酰胺的研究

以废动植物油脂为原料,在自制DYD催化剂作用下制得脂肪酸甲酯,再以氢氧化钾为催化剂,与二乙醇胺合成烷醇酰胺。考察了反应温度、反应时间、催化剂用量、真空度等因素对反应的影响,通过单因素实验和析因实验确定最佳工艺条件为:甲酯/二乙醇胺物质的量比1∶1.55,反应温度110℃,反应时间2.5 h,真空度0.08 MPa,催化剂用量0.65%(相对于脂肪酸甲酯的质量),烷醇酰胺的收率达96.3%。通过红外光谱对产物结构进行了表征,并对界面张力进行了测定。结果表明,产物具有较好的界面活性。     

Synthesis of high molecular weight poly(methyl methacrylate) microspheres by suspension polymerization in the presence of silver nanoparticles

To prepare high molecular weight (HMW) poly(methyl methacrylate) (PMMA)/silver microspheres, methyl methacrylate was suspension-polymerized in the presence of silver nanoparticles using a low-temperature initiator at different conditions. The rate of conversion was increased with increasing initiator concentration. In the case of adding silver nanoparticles, the rate of polymerization decreased slightly. High monomer conversion (about 95%) was obtained in spite of low polymerization temperature of 30 °C. Under controlled conditions, PMMA/silver microspheres with various viscosity-average degree of polymerization (6,000–37,000) were prepared.     

Immobilization of bromelain onto porous copoly(γ-methyl-l-glutamate/l-leucine) beads

Water-insoluble bromelain was prepared by immobilizing bromelain onto the surface of porous copoly(γ-methyl-l-glutamate/l-leucine) (ML) beads with and without spacer. The mode of the immobilization between bromelain and porous copolypeptide ML beads was covalent fixation. The relative activity and the stability of the immobilized bromelain was investigated. The retained activity of the bromelain covalently immobilized by the azide method was found to be excellent toward a small ester substrate, N-benzyl-l-arginine ethyl ester, but rather low toward casein, a high molecular weight substrate. The values of the Michaelis constant K_m and the maximum reaction velocity V_m for free and immobilized bromelain on the porous copolypeptide ML beads were estimated. Apparent K_m was larger for immobilized bromelain than for the free one, while V_m was smaller for the immobilized bromelain. The thermal stability of the covalently immobilized bromelain was higher than that of the free bromelain. The initial enzymatic activity of the immobilized bromelain remained approximately unchanged with storage time, when the batch enzyme reaction was performed repeatedly, indicating the excellent durability.     

Pd(II)-catalyzed vinylic polymerization of norbornene and copolymerization with norbornene and copolymerization with norbornene carboxylic acid esters

The vinylic polymerization of norbornene and its copolymerization with norbornene carboxylic acid methyl esters were investigated. Norbornene was polymerized by us using di-μ-chloro-bis-(6-methoxybicyclo[2.2.1]hept-2-ene-endo-5σ,2π)-palladium(II) as catalyst. The polymerization time can be decreased by a factor of 100000 by activation of the catalyst with methylaluminoxane (MAO). With this palladium catalyst activated by MAO, 140 t of norbornene can be polymerized per mol palladium per h. This catalyst system was much more active than [Pd(CH₃CN)₄](BF₄)₂ ( I ). The polymerization of norbornene by (6-methoxybicyclo[2.2.1]hept-2-ene-endo-5σ,2π)-palladium(II) tetrafluoroborate was also possible but it was not as fast as the polymerization by Pd catalysts activated with MAO. We were also able to obtain copolymers of norbornene and 5-norbornene-2-carboxylic acid methyl ester (exo/endo = 1/4 or 2/3) containing between 15 and 20 mol-% ester units. The copolymerization of norbornene and 2-methyl-5-norbornene-2-carboxylic acid methyl ester (exo/endo = 7/3) was faster than the copolymerization mentioned before. In contrast the homopolymerization of 2-methyl-5-norbornene-2-carboxylic acid methyl ester was 10 times slower than that of 5-norbornene-2-carboxylic acid methyl ester (exo/endo = 1/4).     

Lysine‐based functional blocked isocyanates for the preparation of polyurethanes provided with pendant side groups

This article describes a methodology to prepare polyurethanes (PUs), decorated with pendant (bio)functional side groups, by polymerizing (bio)functionalized blocked diisocyanates with polyols. Caprolactam blocked lysine diisocyanate methyl ester (BLDI‐OMe) was prepared in high yields, by reacting the methyl ester of lysine with carbonyl biscaprolactam. In the absence of a catalyst, the polymerization of BLDI‐OMe with polycaprolactone and polytetrahydrofuran resulted in strictly linear PUs due to the high selective reactivity of the blocked isocyanates (BIs). Although the ester appeared to be less reactive, we found hydrolyzing conditions for the ester, without affecting the BIs. The free acid groups were converted into a N‐hydroxysuccinimide (NHS) activated ester, which was a versatile intermediate for further functionalization. After having demonstrated that model amines were able to substitute NHS without effecting the BIs groups, the same chemistry was used to couple biotin, giving a biotin functional caprolactam blocked lysine diisocyanate. The polymerization with polyols afforded the corresponding biotin‐functional PUs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2036–2049