Cyclic quaternary ammonium ionic liquids with perfluoroalkyltrifluoroborates: synthesis, characterization, and properties

New cyclic quaternary ammonium salts, composed of N-alkyl(alkyl ether)-N-methylpyrrolidinium, -oxazolidinium, -piperidinium, or -morpholinium cations (alkyl = nC4H9, alkyl ether = CH3OCH2, CH3OCH2CH2) and a perfluoroalkyltrifluoroborate anion ([R(F)BF3]-, R(F) = CF3, C2F5, nC3F7, nC4F9), were synthesized and characterized. Most of these salts are liquids at room temperature. The key properties of these salts--phase transitions, thermal stability, density, viscosity, conductivity, and electrochemical windows--were measured and compared to those of their corresponding [BF4]- and [(CF3SO2)2N]- salts. The structural effect on all the above properties was intensively studied in terms of the identity of the cation and anion, variation of the side chain in the cation (i.e., alkyl versus alkyl ether), and change in the length of the perfluoroalkyl group (R(F)) in the [R(F)BF3]- ion. The reduction of Li+ ions and reoxidation of Li metal took place in pure N-butyl-N-methylpyrrolidinium pentafluoroethyltrifluoroborate as the supporting electrolyte. Such comprehensive studies enhance the knowledge necessary to design and optimize ionic liquids for many applications, including electrolytes. Some of these new salts show desirable properties, including low melting points, high thermal stabilities, low viscosities, high conductivities, and wide electrochemical windows, and may thus be potential candidates for use as electrolytes in high-energy storage devices. In addition, many salts are ionic plastic crystals.     

Comparison of physicochemical properties of new ionic liquids based on imidazolium, quaternary ammonium, and guanidinium cations

More than 50 ionic liquids were prepared by using imidazolium, quaternary ammonium, and guanidinium cations and various anions. In these series, different cationic structures such as 1-benzyl-3-methylimidazolium [Bzmim]+, 1,3-dibenzylimidazolium [BzmiBz]+, 1-octyl-3-methylimidazolium [C8mim]+, 1-decyl-3-methylimidazolium [C10mim]+, tricapryl-methylammonium [Aliquat]+, benzyltriethylammonium [BzTEA]+, phenyltrimethylammonium [PhTMA]+, and dimethyldihexylguanidinium [DMG]+ were combined with anions, p-toluenesulfonate [TSA](-), dicyanoamide [DCA]-, saccharine (2-sulfobenzoic acid imide sodium salt) [SAC]-, trifluoroacetate [TFA]-, bis(trifluoromethanesulfonyl)imide [Tf2N]-, trifluoromethanesulfonate [TfO]-, and thiocyanate [SCN]-. Important physical data for these ionic liquids are collated, namely solubility in common solvents, viscosity, density, melting point and water content. Apart from the viscosity, the Newtonian and non-Newtonian behavior of these ionic liquids is also disclosed. Stability of these ionic liquids under thermal, basic, acidic, nucleophilic, and oxidative conditions was also studied. The features of the solid-liquid phase transition were analyzed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. A degradation temperature of each ionic liquid was also determined. Comparisons of the properties of various ionic liquids were made.     

Preparation of novel,moisture-stable,Lewis-acidic ionic liquids containing quaternary ammonium salts with functional side chains

A range of novel, moisture-stable, Lewis-acidic ionic liquids has been prepared by mixing appropriate molar ratios of MCl2 (M = Zn and/or Sn) and quaternary ammonium salts of formula [Me3NC2H4Y]Cl (Y = OH, Cl, OC(O)Me, OC(O)Ph); the influence of substituent Y and metal M on the physical properties of the melts has been investigated.     

Measuring molecular dynamics and activation energies for quaternary acyclic ammonium and cyclic pyrrolidinium ionic liquids using 14N NMR spectroscopy

The (14)N NMR spin-lattice (R(1)) and spin-spin (R(2)) relaxation rates were determined as a function of temperature for a series of tetra-alkyl acyclic ammonium and cyclic pyrrolidinium ionic liquids (ILs). Through the use of the R(2)/R(1) ratio method, it was shown that for the majority of these ILs, the reorientational dynamics are not in the extreme narrowing regime, but instead are in the dispersive relaxation regime, thus allowing a unique solution for the correlation time to be determined. The temperature variation of the R(2) relaxation rate, along with the temperature variation of the calculated correlation times, allowed activation energies for the reorientational dynamics to be measured and compared. In addition, these NMR relaxation experiments enabled the (14)N quadrupolar coupling product to be extracted, which revealed surprising temperature dependence. Collectively, the (14)N NMR results allow the impact of cation and anion identity on the local reorientational dynamics of these ILs to be delineated.     

Effect of the cation structure on the thermal stability of ionic liquids,quaternary ammonium tetrachloroferrates(III)

New ionic liquids, tetrachloroferrates(III) of quaternary ammonium salts [(CH₃)₂NR₁R₂]FeCl₄ [R₁ = CH₃; C₄H₉; (CH₂)₃CN. R₂ = C₁₀H₂₁; C₁₆H₃₃; CH₂CH₂OH; CH₂C₆H₅], were synthesized and their thermal stability was investigated in air in the range 25–600°С. The mechanism of thermal decomposition of the investigated ionic liquids is suggested in agreement with Hofmann’s rule as β-E2-elimination.     

A comparative study on absorption and selectivity of organic vapors by using ionic liquids based on imidazolium, quaternary ammonium, and guanidinium cations

A novel study on organic solute absorption from the vapor phase is reported. The organic solutes chosen for the absorption studies include 1,4-benzodioxane, biphenyl, xanthene, and menthol. A series of imidazolium, ammonium, and guanidinium-based ionic liquids (ILs) containing several types of anions were used as absorbents. Absorption of water vapor was also studied along with the organic solutes. Absorption studies of each organic solute were performed by using a specially devised glass apparatus at 50 degrees C. It was observed that the rate of absorption increases with time and is faster in the case of 1,4-benzodioxane (24 h). The absorption process for each organic solute with different classes of ionic liquids was studied and the results were compared with each other. Absorption values of more than 25,000 ppm were observed in some ionic liquids. Distribution ratios of organic solutes in an ionic liquid and in the vapor phase were measured and the selectivity was evaluated by using the distribution ratio values. A remarkable selectivity was observed for some ionic liquids towards a specific organic solute. Importantly, it was observed that the selectivity remained constant, even though a mixture of solute was used for the absorption study. Desorption of organic vapors from ionic liquids was successfully carried out by applying a vacuum. Further, it was observed that the same ionic liquid can be repeatedly reused several times for absorption. These studies reveal that, in future, a task-specific ionic liquid can be prepared and used for specific solute capture from the vapor phase.     

Synthesis, characterization and thermal properties of new aromatic quaternary ammonium bromides: precursors for ionic liquids and complexation studies

Series of new aromatic R₂R′₂N⁺Br⁻ (R=benzyl, 4-methylbenzyl, 2-phenylethyl, 3-phenylpropyl; R′=ethyl, methyl, isopropyl) or RR′₂NH⁺Br⁻-type (R=benzyl, R′=isopropyl) quaternary ammonium bromides were prepared by using novel synthetic route in which a formamide (N,N-diethylformamide, N,N-dimethylformamide, N,N-diisopropylformamide) is treated with aralkyl halide in presence of a weak base. The compounds were characterized by ¹H-NMR and ¹³C-NMR spectroscopy and mass spectrometry. Structures of the crystalline compounds were determined by X-ray single crystal diffraction, and in addition the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. Three of the compounds crystallized in monoclinic, two in orthorhombic and one in triclinic crystal system, showing ion pairs, which are interconnected by weak hydrogen bonds and weak π-π interactions between the phenyl rings. Three of the compounds appeared as viscous oil or waxes. Finally, TG/DTA and DSC methods were used to analyze thermal properties of the prepared compounds. The lowest melting points were obtained for diethyldi-(2-phenylethyl)ammonium bromide (122.2 °C) and for diethyldi-(3-phenylpropyl)-ammonium bromide (109.1 °C). In general, decomposition of the compounds started at 170-190 °C without identifiable cleavages, thus liquid ranges of 30-70 °C were observed for some of the compounds.     

Analysis of quaternary ammonium and phosphonium ionic liquids by reversed-phase high-performance liquid chromatography with charged aerosol detection and unified calibration

Several hydrophobic ionic liquids (ILs) based on long-chain aliphatic ammonium- and phosphonium cations and selected aromatic anions were analyzed by reversed-phase high-performance liquid chromatography (RP-HPLC) employing trifluoroacetic acid as ion-pairing additive to the acetonitrile-containing mobile phase and adopting a step-gradient elution mode. The coupling of charged aerosol detection (CAD) for the non-chromophoric aliphatic cations with diode array detection (DAD) for the aromatic anions allowed their simultaneous analysis in a set of new ILs derived from either tricaprylmethylammonium chloride (Aliquat 336) and trihexyltetradecylphosphonium chloride as precursors. Aliquat 336 is a mix of ammonium cations with distinct aliphatic chain lengths. In the course of the studies it turned out that CAD generates an identical detection response for all the distinct aliphatic cations. Due to lack of single component standards of the individual Aliquat 336 cation species, a unified calibration function was established for the quantitative analysis of the quaternary ammonium cations of the ILs. The developed method was validated according to ICH guidelines, which confirmed the validity of the unified calibration. The application of the method revealed molar ratios of cation to anion close to 1 indicating a quantitative exchange of the chloride ions of the precursors by the various aromatic anions in the course of the synthesis of new ILs. Anomalies of CAD observed for the detection of some aromatic anions (thiosalicylate and benzoate) are discussed.     

Physicochemical properties and structures of room-temperature ionic liquids. 3. Variation of cationic structures

A series of room-temperature ionic liquids (RTILs) were prepared with different cationic structures, 1-butyl-3-methylimidazolium ([bmim]), 1-butylpyridinium ([bpy]), N-butyl-N-methylpyrrolidinium, ([bmpro]), and N-butyl-N,N,N-trimethylammonium ([(n-C(4)H(9))(CH(3))(3)N]) combined with an anion, bis(trifluoromethane sulfonyl)imide ([(CF(3)SO(2))(2)N]), and the thermal property, density, self-diffusion coefficients of the cation and anion, viscosity, and ionic conductivity were measured over a wide temperature range. The self-diffusion coefficient, viscosity, ionic conductivity, and molar conductivity follow the Vogel-Fulcher-Tamman equation for temperature dependencies, and the best-fit parameters have been estimated, together with the linear fitting parameters for the density. The relative cationic and anionic self-diffusion coefficients for the RTILs, independently determined by the pulsed-field-gradient spin-echo NMR method, appear to be influenced by the shape of the cationic structure. A definite order of the summation of the cationic and anionic diffusion coefficients for the RTILs: [bmim][(CF(3)SO(2))(2)N] > [bpy][(CF(3)SO(2))(2)N] > [bmpro][(CF(3)SO(2))(2)N] > [(n-C(4)H(9))(CH(3))(3)N][(CF(3)SO(2))(2)N], has been observed, which coincides with the reverse order to the viscosity data. The ratio of molar conductivity obtained from the impedance measurements to that calculated by the ionic diffusivity using the Nernst-Einstein equation quantifies the active ions contributing to ionic conduction in the diffusion components and follows the order: [bmpro][(CF(3)SO(2))(2)N] > [(n-C(4)H(9))(CH(3))(3)N][(CF(3)SO(2))(2)N] > [bpy][(CF(3)SO(2))(2)N] > [bmim][(CF(3)SO(2))(2)N] at 30 degrees C.     

Aqueous solutions of ionic liquids. Description of osmotic coefficients within the Binding Mean Spherical Approximation

The Binding Mean Spherical Approximation (BiMSA) is used to describe osmotic coefficients of aqueous solutions of salts containing imidazolium cations and bulky anions over the whole concentration range at temperature in the range (25 to 60) °C. A total of 13 salts have been considered altogether. The ion diameters, the permittivity of solution and the association constant were taken as adjustable parameters. Ionic liquids are described as being weakly associated in water, and association constants values obtained within the BiMSA model are in good agreement with those from the literature. Diameter values were assigned to 1-alkyl-3-methylimidazolium cations. The adjusted values obtained for the cation diameters increased with the number of carbons on the alkyl chain. For all systems studied, average relative deviations were found to be satisfactory.     

Understanding ionic liquids at the molecular level: facts, problems, and controversies

Ionic liquids (ILs) are organic salts with melting points near room temperature (or by convention below 100 degrees C). Recently, their unique materials and solvent properties and the growing interest in a sustainable, "green" chemistry has led to an amazing increase in interest in such salts. A huge number of potential cation and anion families and their many substitution patterns allows the desired properties for specific applications to be selected. Because it is impossible to experimentally investigate even a small fraction of the potential cation-anion combinations, a molecular-based understanding of their properties is crucial. However, the unusual complexity of their intermolecular interactions renders molecular-based interpretations difficult, and gives rise to many controversies, speculations, and even myths about the properties that ILs allegedly possess. Herein the current knowledge about the molecular foundations of IL behavior is discussed.     

Structure of the liquid-vacuum interface of room-temperature ionic liquids: a molecular dynamics study

Molecular dynamics simulations for the liquid-vacuum interface of the ionic liquid 1-ethyl-3-methylimidazolium nitrate (EMIM+/NO3-) were performed for both electronically polarizable and nonpolarizable potential energy surfaces. The interfacial structural properties, such as the oscillation in the number density profile, the orientational ordering, and the local clustering in the interfacial region, were calculated. The simulations with both the polarizable and nonpolarizable model demonstrate the existence of an inhomogeneous interfacial structure normal to the surface layer. It was found for both models that the ethyl tail group on EMIM+ is likely to protrude outward from the surface. In the outmost surface layer, the cation is likely to lie on the surface with the imidazolium ring parallel to the interface, while there is a second region with enhanced density from that in the bulk where the cation preferably slants with the imidazolium ring tending to be perpendicular to the surface. The results also reveal that the electronic polarization effect is important for the ionic liquid interface. It is found that the cation is likely to be segregated at the ionic liquid surface for the polarizable model, while for the nonpolarizable model, the anion is found to be more likely to exhibit such behavior. The surface tension of the polarizable model (58.5 +/- 0.5 mN/m) is much smaller than that of the nonpolarizable model (82.7 +/- 0.6 mN/m), in better agreement with extrapolated experimental measurements on similar ionic liquid systems.     

A molecular dynamics computer simulation study of room-temperature ionic liquids. II. Equilibrium and nonequilibrium solvation dynamics

The molecular dynamics (MD) simulation study of solvation structure and free energetics in 1-ethyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium hexafluorophosphate using a probe solute in the preceding article [Y. Shim, M. Y. Choi and H. J. Kim, J. Chem. Phys. 122, 044510 (2005)] is extended to investigate dynamic properties of these liquids. Solvent fluctuation dynamics near equilibrium are studied via MD and associated time-dependent friction is analyzed via the generalized Langevin equation. Nonequilibrium solvent relaxation following an instantaneous change in the solute charge distribution and accompanying solvent structure reorganization are also investigated. Both equilibrium and nonequilibrium solvation dynamics are characterized by at least two vastly different time scales--a subpicosecond inertial regime followed by a slow diffusive regime. Solvent regions contributing to the subpicosecond nonequilibrium relaxation are found to vary significantly with initial solvation configurations, especially near the solute. If the solvent density near the solute is sufficiently high at the outset of the relaxation, subpicosecond dynamics are mainly governed by the motions of a few ions close to the solute. By contrast, in the case of a low local density, solvent ions located not only close to but also relatively far from the solute participate in the subpicosecond relaxation. Despite this difference, linear response holds reasonably well in both ionic liquids.     

Density scaling of the transport properties of molecular and ionic liquids

Casalini and Roland [Phys. Rev. E 69, 062501 (2004); J. Non-Cryst. Solids 353, 3936 (2007)] and other authors have found that both the dielectric relaxation times and the viscosity, η, of liquids can be expressed solely as functions of the group (TV?(γ)), where T is the temperature, V is the molar volume, and γ a state-independent scaling exponent. Here we report scaling exponents γ, for the viscosities of 46 compounds, including 11 ionic liquids. A generalization of this thermodynamic scaling to other transport properties, namely, the self-diffusion coefficients for ionic and molecular liquids and the electrical conductivity for ionic liquids is examined. Scaling exponents, γ, for the electrical conductivities of six ionic liquids for which viscosity data are available, are found to be quite close to those obtained from viscosities. Using the scaling exponents obtained from viscosities it was possible to correlate molar conductivity over broad ranges of temperature and pressure. However, application of the same procedures to the self-diffusion coefficients, D, of six ionic and 13 molecular liquids leads to superpositioning of poorer quality, as the scaling yields different exponents from those obtained with viscosities and, in the case of the ionic liquids, slightly different values for the anion and the cation. This situation can be improved by using the ratio (D∕T), consistent with the Stokes-Einstein relation, yielding γ values closer to those of viscosity.     

On the computation and contribution of conductivity in molecular ionic liquids

In this study we present the results of the molecular dynamics simulation of the ionic liquids: 1-butyl-3-methyl-imidazolium tetrafluoroborate and trifluoromethylacetate as well as 1-ethyl-3-methyl-imidazolium dicyanamide. Ionic liquids are characterized by both a molecular dipole moment and a net charge. Thus, in contrast to a solution of simple ions in a (non-) polar solvent, rotational and translational effects influence the very same molecule. This study works out the theoretical framework necessary to compute the conductivity spectrum and its low frequency limit of ionic liquids. Merging these computed conductivity spectra with previous simulation results on the dielectric spectra of ionic liquids yields the spectrum of the generalized dielectric constant, which may be compared to experiments. This spectrum was calculated for the three ionic liquids over six orders of magnitude in frequency ranging from 10 MHz to 50 THz. The role of rotation and translation and their coupling term on the generalized dielectric constant is discussed in detail with a special emphasis on the zero-frequency limit. Thereby, the frequency dependence of the cross correlation between the collective rotational dipole moment and the current is discussed.     

A molecular dynamics computer simulation study of room-temperature ionic liquids. I. Equilibrium solvation structure and free energetics

Solvation in 1-ethyl-3-methylmidazolium chloride and in 1-ethyl-3-methylimidazolium hexafluorophosphate near equilibrium is investigated via molecular dynamics computer simulations with diatomic and benzenelike molecules employed as probe solutes. It is found that electrostriction plays an important role in both solvation structure and free energetics. The angular and radial distributions of cations and anions become more structured and their densities near the solute become enhanced as the solute charge separation grows. Due to the enhancement in structural rigidity induced by electrostriction, the force constant associated with solvent configuration fluctuations relevant to charge shift and transfer processes is also found to increase. The effective polarity and reorganization free energies of these ionic liquids are analyzed and compared with those of highly polar acetonitrile. Their screening behavior of electric charges is also investigated.     

Solvation and aggregation of n,n'-dialkylimidazolium ionic liquids: a multinuclear NMR spectroscopy and molecular dynamics simulation study

The solvation and aggregation of the ionic liquid (IL) 1-n-butyl-3-methylimidazolium chloride ([C4mim]Cl) in water and dimethylsulfoxide (DMSO) were examined by analysis of (1)H and (35/37)Cl chemical shift perturbations and molecular dynamics (MD) simulations. Evidence of aggregation of the IL n-butyl chains in aqueous environments at IL concentrations of 75-80 wt% was observed both in the NMR experiments and in the MD simulations. The studies also show that [C4mim]Cl behaves as a typical electrolyte in water, with both ions completely solvated at low concentrations. On the other hand, the data reveal that the interactions between the [C4mim](+) and Cl(-) ions strengthen as the DMSO content of the solutions increases, and IL-rich clusters persist in this solvent even at concentrations below 10 wt%. These results provide an experimentally supported atomistic explanation of the effects that these two solvents have on some of the macroscopic properties of [C4mim]Cl. The implications that these findings could have on the design of IL-based solvent systems are briefly discussed.