胶囊Ca(OH)2制备及其对PVC热稳定性影响

采用界面缩聚法在CaO消化成Ca(OH)2的过程中,苯酚和甲醛反应生成的酚醛树脂原位包覆在Ca(OH)2表面,合成胶囊氢氧化钙。通过调节预聚体用量、控制反应时间和温度,借助TEM、FTIR和TG等测试结果表明,当苯酚-甲醛预聚体用量为20%,反应温度80℃,反应时间为2 h,酚醛树酯包覆的Ca(OH)2效果最佳。并采用刚果红法、DSC-TG对胶囊Ca(OH)2填充PVC复合材料进行性能研究。结果表明,添加质量分数为1%的胶囊Ca(OH)2,热稳定时间提高2倍多,且随着含量的增加热稳定时间相继提高。从SEM分析结果中可以看出,胶囊Ca(OH)2与PVC相容性有所增加。     

乙烯齐聚制α-烯烃反应体系的热力学研究

利用Benson基团贡献法计算了乙烯齐聚制α-烯烃反应各物质的标准摩尔生成焓、标准摩尔熵和摩尔定压热容,在298～700 K温度范围内对乙烯齐聚制α-烯烃反应体系的反应热、吉布斯自由能以及反应平衡常数进行了详尽的计算,分析了不同反应步骤的热力学平衡与限度,对不同反应发生的热力学可能性与顺序进行了判断,考察了反应温度和压力对乙烯齐聚制α-烯烃反应化学平衡的影响,确定了乙烯齐聚制α-烯烃反应体系适宜的工艺条件.结果表明:乙烯齐聚制α-烯烃反应为放热反应;从热力学上看,温度低于546 K时,乙烯齐聚生成直链α-烯烃反应为自发过程,且比α-烯烃异构化和烯烃歧化反应更容易进行;低温、高压有利于乙烯齐聚制α-烯烃反应的进行;乙烯齐聚制α-烯烃反应体系适宜的工艺条件为温度323～473 K,压力5～20 MPa,且在SHOP法的工艺条件下(温度363 K,压力10.3 MPa),乙烯齐聚生成直链α-烯烃反应的热力学平衡转化率接近于100%.     

自由基技术在α-烯烃均聚以及与功能性单体共聚中的应用进展

综述了自由基聚合在α-烯烃均聚及与功能性单体共聚制备功能化聚烯烃方面的研究进展。自由基聚合方法具有易操作、成本低等优点,特别是随着活性自由基聚合的发展,使对通过自由基聚合所得聚合物的结构进行精确调控成为可能。目前在α-烯烃均聚方面,通过选择适当的溶剂以及添加有机锂盐,使在相对温和条件下自由基引发α-烯烃合成高分子量聚合物成为可能。在共聚体系中,路易斯酸或布伦特斯酸的引入可以大幅提高共聚物中α-烯烃的含量。     

乙酰丙酮氧钒催化氧化α-蒎烯一步转化成龙脑烯醛

以乙酰丙酮氧钒为催化剂,过氧化氢为氧化剂,研究了由α-蒎烯直接合成龙脑烯醛的反应。考察了溶剂、温度、催化剂用量、反应时间等因素对催化性能的影响。结果表明,乙酰丙酮氧钒与H2O2反应得到的高价态V5+是优良的氧化还原-Lewis酸双功能催化剂,易使α-蒎烯经氧化、2,3-环氧蒎烷异构得到龙脑烯醛。在n(H2O2):n(α-蒎烯):n(乙酰丙酮氧钒)=2.5:1:0.01、反应温度为20℃、丙酮为溶剂、反应2h条件下,α-蒎烯转化率为50.2%,龙脑烯醛的选择性达58.7%,反应6h后α-蒎烯转化率可达73.0%,主要产物龙脑烯醛和马鞭草烯酮的选择性分别为47.2%和13.2%。     

石蜡的裂解气相色谱法研究

裂解反应,裂解温度是一个重要因素。本实验用日本岛津GC-RIA气相色谱的PYR-2A裂解器裂解工业石蜡,并寻求最佳的裂解温度。碳数为C_6～C_(20)之间的α-烯烃在工业化学中作为制造直链去垢剂的中间体。工业用的裂化蜡含有85～95%的α-烯烃和不同含量的异构物,支链的、环状的链烃及二烯烃。我们的实验是从450～750℃之间进行的,从而找到了最佳的裂解温度为625℃,这时α-烯烃的产率最高为     

乙烯线性齐聚的研究Ⅱ、ZrCl4—Et2AlCl二组分体系的催化作用

1.引言 随着石油化工和精细化工的日益发展,工业上对直链α-烯烃的需要愈来愈迫切。乙烯齐聚反应是制备直链α-烯烃的重要方法。以过渡金属锆的化合物与烷基铝化合物组成的二元Ziegler-Natta体系催化乙烯线性齐聚,其文献和专利报导较少,且以合成高碳α-烯烃为目的。我们曾报导过ZrCl_4-Et_3A1_2Cl_3体系催化乙烯齐聚,虽能得到低碳α-烯烃,但效果较差。在使用Et_2AlCl作活化剂时结果较好。     

脲甲醛缩聚物制备电子墨水微胶囊研究

在原位聚合法制备脲甲醛树脂微胶囊的过程中 ,使用水溶性低分子量脲甲醛缩聚物代替传统的脲甲醛预聚体 (一羟甲基脲、二羟甲基脲 )作为反应单体 ,由于脲甲醛缩聚物比后者更容易吸附在分散相液滴表面 ,解决了用原位聚合法制备脲甲醛微胶囊所常有的结块、粘连、表面粗糙、产率低的问题 .研究了低分子量脲甲醛缩聚物水溶液的粘度特征和表面活性及其与胶囊包封率的关系 .使用这种方法制备出了电子墨水微胶囊     

镍二亚胺配合物/烷基铝催化乙烯聚合

直链低碳α-烯烃是生产线性低密度聚乙烯的共聚单体及合成高级润滑油和一些精细化学品的中间体，通过乙烯齐聚反应生成直链α-烯烃是目前工业上重要的生产方法，近几年来使乙烯齐聚成α-烯烃的含二或三齿配体后过渡金属催化剂的催化特性受到人们很大的关注。     

MIL-101(Fe)高效催化 β-蒎烯与甲醛的Prins缩合制备诺卜醇

通过水热晶化法制备了MIL-101(Fe)金属有机骨架材料, 利用X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)、 热重分析(TG)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和X射线光电子能谱(XPS)对催化剂的结构和形貌进行了表征. 结果表明, 该材料用于催化β-蒎烯与甲醛的Prins缩合制备诺卜醇反应的效果优异; 催化剂合成温度、 合成时间、 催化剂用量、 反应溶剂、 反应温度和反应时间对β-蒎烯的反应结果均有一定影响. 在相似的反应条件下, 合成的MIL-101(Fe)催化β-蒎烯制备诺卜醇反应的最佳条件为使用150 ℃下反应15 h合成的催化剂MIL-101(Fe), 在90 ℃下反应8 h得到的β-蒎烯转化率高达97.3%, 诺卜醇选择性达到96.7%.     

CoSAPO-5分子筛的快速合成及高效催化α-蒎烯与空气环氧化反应

构建了用于催化空气环氧化α-蒎烯合成α-环氧蒎烷的高效、节能、绿色催化反应体系.首先,采用转动水热晶化模式合成了SAPO-5分子筛前驱体.相比于静态水热晶化模式,转动水热晶化模式可以显著缩短分子筛成核时间和晶化时间,同时可有效减小晶粒尺寸并显著提高晶粒尺寸的均一性.进一步对SAPO-5分子筛前驱体进行改性制得Co SAPO-5分子筛催化剂,并对反应溶剂、催化剂用量、反应温度和反应时间进行了优化.在获得的最优催化反应条件下,α-蒎烯转化率可达96.5%,α-环氧蒎烷产率可达89.0%.催化剂循环实验结果表明,该催化剂是稳定的、可多次循环使用的多相催化剂.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.