DSC determination of the sublimation enthalpy of bis(2,4-pentanedionato)oxovanadium(IV) and tetrakis(2,4-pentanedionato)zirconium(IV)

The sublimation enthalpies of bis(2,4-pentanedionato)oxovanadium(IV) and tetrakis(2,4-pentanedionato)zirconium(IV) have been determined by differential scanning calorimetry as 140.7 ± 4.0 and 132.0 ± 6.8 kJ mol⁻¹, respectively. The fusion enthalpy of the latter complex has also been determined as 33.68 ± 2.5 kJ mol⁻¹. A summary of “selected” sublimation enthalpy data for first-row transition metal acetylacetonate complexes is included.     

Kinetic study of polyurethanes formation by using differential scanning calorimetry

Kinetics of polyurethane formation between several polyols and isocyanates with dibutyltin dilaurate (DBTDL) as the curing catalyst, were studied in the bulk state by differential scanning calorimetry (DSC) using an improved method of interpretation. The molar enthalpy of urethane formation from secondary hydroxyl groups and aliphatic isocyanates is 72±3 kJ mol^-1 and for aromatic isocyanates it is 55±2 kJ mol^-1 . In the case of a single second order reaction for aliphatic isocyanates reaction, activation energy is 70±5 kJ mol^-1 with oxypropylated polyols and 50±3 kJ mol^-1 with Castor oil. For aromatic isocyanates and oxypropylated polyols the activation energy is higher around 77 kJ mol^-1 . In the case of two parallel reactions (situation for IPDI and TDI 2-4) best fits are observed considering two different activation energies.     

Thermokinetics on the reaction of formation of Dy[(C5H8NS2)3(C12H8N2)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen•H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ•mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ•mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.

     

Thermodynamics of the PuIr2 intermetallic compound

The sublimation behavior and thermodynamic properties of the PuIr₂ intermetallic compound were determined in this study. Vapor pressures were measured by the Knudsen effusion technique using target collection and mass spectrometry. Sublimation to form elemental Pu(g) predominates for the phases and temperature ranges selected. The enthalpy and entropy of sublimation at 1929 K were 537.1 ± 5.9 kJ mol⁻¹ and 98.4 ± 2.9 J K⁻¹ mol⁻¹ respectively. Third-law analyses using estimated free-energy functions yielded enthalpies of sublimation and formation at 298 K of 547.1 and −195.2 kJ mol⁻¹ respectively. Thermodynamic properties determined in this study were correlated with values obtained from theoretical predictions and from previous studies of analogous intermetallics.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Characterization of Bioimprinted Tannase and Its Kinetic and Thermodynamics Properties in Synthesis of Propyl Gallate by Transesterification in Anhydrous Medium

Tannase has been extensively applied to synthesize gallic acid esters. Bioimprinting technique can evidently enhance transesterification-catalyzing performance of tannase. In order to promote the practical utilization of the modified tannase, a few enzymatic characteristics of the enzyme and its kinetic and thermodynamics properties in synthesis of propyl gallate by transesterification in anhydrous medium have been studied. The investigations of pH and temperature found that the imprinted tannase holds an optimum activity at pH?5.0 and 40?°C. On the other hand, the bioimprinting technique has a profound enhancing effect on the adapted tannase in substrate affinity and thermostability. The kinetic and thermodynamic analyses showed that the modified tannase has a longer half-time of 1,710?h at 40?°C; the kinetic constants, the activation energy of reversible thermal inactivation, and the activation energy of irreversible thermal inactivation, respectively, are 0.054?mM, 17.35?kJ?mol^?1, and 85.54?kJ?mol^?1 with tannic acid as a substrate at 40?°C; the free energy of Gibbs (??G) and enthalpy (??H) were found to be 97.1 and 82.9?kJ?mol^-1 separately under the same conditions.     

O2 Binding to Heme is Strongly Facilitated by Near‐Degeneracy of Electronic States

This paper reports the computed O₂ binding to heme, which for the first time explains experimental enthalpies for this process of central importance to bioinorganic chemistry. All four spin states along the relaxed Fe? O₂‐binding curves were optimized using the full heme system with dispersion, thermodynamic, and scalar‐relativistic corrections, applying several density functionals. When including all these physical terms, the experimental enthalpy of O₂ binding (?59 kJ mol^?1) is closely reproduced by TPSSh‐D3 (?66 kJ mol^?1). Dispersion changes the potential energy surfaces and leads to the correct electronic singlet and heptet states for bound and dissociated O₂. The experimental activation enthalpy of dissociation (～82 kJ mol^?1) was also accurately computed (～75 kJ mol^?1) with an actual barrier height of ～60 kJ mol^?1 plus a vibrational component of ～10 and ～5 kJ mol^?1 due to the spin‐forbidden nature of the process, explaining the experimentally observed difference of ～20 kJ mol^?1 in enthalpies of binding and activation. Most importantly, the work shows how the nearly degenerate singlet and triplet states increase crossover probability up to ～0.5 and accelerate binding by ～100 times, explaining why the spin‐forbidden binding of O₂ to heme, so fundamental to higher life forms, is fast and reversible.     

Vapor pressure, kinetics and enthalpy of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II)

The kinetics of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II), [Cu(tmhd)₂] was studied by non-isothermal and isothermal thermogravimetric (TG) methods. The non-isothermal sublimation activation energy values determined following the procedures of Friedman, Kissinger, and Flynn–Wall methods yielded 93 ± 5, 67 ± 2, and 73 ± 4 kJ mol⁻¹, respectively and the isothermal sublimation activation energy was found to be 97 ± 3 kJ mol⁻¹ over the temperature range of 375–435 K. The dynamic TG run proved the complex to be completely volatile and the equilibrium vapor pressure (p_e)_T of the complex over the temperature range of 375–435 K determined by a TG-based transpiration technique, yielded a value of 96 ± 2 kJ mol⁻¹ for its standard enthalpy of sublimation (Δ_subH°).     

Ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione and hex-1-ene. The enthalpies,entropies, and volumes of activation and reaction in solution

The rates of an ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione and hex-1-ene were studied in a temperature range of 15–40 °C and in a pressure range of 1–2013 bar. The enthalpy of reaction in 1,2-dichloroethane (?158.2±1.0 kJ mol^?1), the enthalpy (51.3±0.5 kJ mol^?1), entropy (122±2 J mol^?1 K^?1), and volume of activation (?31.0±1.0 cm3 mol^?1), and the volume of this reaction (?26.6±0.3 cm³ mol^?1) were determined. The high exothermic effect of the reaction suggests its irreversibility.     

The use of thermogravimetry to follow the rate of evaporation of an ingredient used in perfumes

Ingredients used in the manufacture of perfumes can be investigated by thermogravimetry. In this study the evaporation of methyl benzoate was investigated using a simultaneous TG-DTA unit. A rising temperature method of thermal analysis was used for the study. The rate of evaporation of the ingredient was calculated from a simple plot of percentage mass lossvs. time. A derivative plot of the same was used to calculate the coefficient of evaporation in a controlled atmosphere and regulated air flow rate. In a series of programmed temperature runs on the TGDTA unit it was shown that the evaporation process is zero order, and that the evaporation coefficients at each temperature can be fitted into the Arrhenius equation. The energy of activation, E_act can be calculated from the slope of the line. It was found to be 47 kJ mol^–1. This value was compared and shown to approach the enthalpy of vaporization as calculated using the Troutons or Clausius Clapeyron equation     

Standard molar enthalpies of formation and sublimation of <Emphasis Type="Italic">N</Emphasis>-phenylphthalimide

The standard (p ⁰=0.1 MPa) molar enthalpy of formation, Δ_f H ⁰ _m, for crystalline N-phenylphthalimide was derived from its standard molar enthalpy of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as –206.0±3.4 kJ mol^–1. The standard molar enthalpy of sublimation, Δ^g _cr H ⁰ _m , at T=298.15 K, was derived, from high temperature Calvet microcalorimetry, as 121.3±1.0 kJ mol^–1. The derived standard molar enthalpy of formation, in the gaseous state, is analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

NMR Studies of Mixed-Ligand Lanthanide (III) Complexes. Peculiarities of Molecular Structure, Dynamics and Paramagnetic Properties for Cerium Subgroup Chelates with Crown Ethers

The molecular structure, dynamics and paramagnetic properties of the complex cations [Ln(ptfa)₂ (18-crown-6)]⁺ in deuterated toluene were studied for Ln = La, Ce, Pr and Nd. The activation enthalpy values of 68 ± 5, 55 ± 15 and 60 ± 13 kJ mol^-1 for the 18-crown-6 conformationalinversion processes for the complexcations of Ce, Pr and Nd, respectively,were obtained. Quantitativeinvestigation of the lanthanide-induced chemical shifts shows a monotonic change of a spatial structure and magnetic susceptibility in comparison with the Bleaney predicted dependence. The free energy of molecular inversion activation for 18-crown-6 molecules in the complex cation [Ln(fod)₂(18-crown-6)]⁺ is 74 ± 9 kJ mol^-1 at 363 K, which is a little more than the value of the free energy of activation 64 ± 9 kJ mol^-1 at 363 K in the complex cation [Ln(ptfa)₂(18-crown-6)]⁺.     

Determination of specific heat capacity and standard molar combustion enthalpy of taurine by DSC

Using XRY-1C calorimeter, the standard molar enthalpy of taurine was determined to be ?2546.2?kJ?mol^?1 . The reliability of the instrument used was tested by using naphthalene as reference material; and through comparing the molar combustion enthalpy of naphthalene measured with its standard value found in literature, the absolute error and relative error were found to be 4.53?kJ?mol^?1 and 0.09%, respectively. The melting point and melting enthalpy of taurine were determined by Differential Scanning Calorimetry (DSC), which was found to be 588.45?K and ?22.197?kJ?mol^?1, respectively. Moreover, using the DSC method, the specific heat capacities C _p of taurine was measured and the relationship between C _p and temperature was established. The thermodynamic basic data obtained are available for the exploiting new synthesis method, engineering design and industry production of taurine.     

The standard enthalpy of formation of silver pivalate

The standard enthalpy of combustion of crystalline silver pivalate, (CH₃)₃CC(O)OAg (AgPiv), was determined in an isoperibolic calorimeter with a self-sealing steel bomb, Δ_c H ⁰ (AgPiv, cr)= −2786.9±5.6 kJ mol⁻¹. The value of standard enthalpy of formation was derived for crystalline state: Δ_f H ⁰(AgPiv,cr)= −466.9±5.6 kJ mol⁻¹. Using the enthalpy of sublimation, measured earlier, the enthalpy of formation of gaseous dimer was obtained: Δ_f H ⁰(Ag₂Piv₂,g)= −787±14 kJ mol⁻¹. The enthalpy of reaction (CH₃)₃CC(O)OAg(cr)=Ag(cr)+(CH₃)₃CC(O)O^.(g) was estimated, Δ_r H ⁰=202 kJ mol⁻¹.     

Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

Thermal Analysis Studies on Isopropylnitrate

Isopropylnitrate (IPN) is described as a detonable material used in propellants and explosives. While there is considerable information available on its sensitivity and compatibility with other materials, very little is known about its thermochemical properties. This paper will describe the results obtained from some DSC, heat flux calorimetry (HFC) and accelerating rate calorimetry (ARC) measurements. The ASTM DSC method using a hermetic aluminum pan having a lid with a laser-produced pin hole was used to determine the vapour pressure of IPN₁. Results calculated from an Antoine equation are in substantial agreement with those determined from DSC measurements. From the latter measurements, the enthalpy of vaporization was determined to be 35.32±0.62 kJ mol⁻¹. Attempts to determine vapour pressures above about 0.8 MPa resulted in significant decomposition of IPN_g. The enthalpy change for decomposition in sealed glass systems was found to be -3.43±0.09 kJ g⁻¹ and -3.85±0.03 kJ g⁻¹, respectively from DSC and HFC measurements on IPN₁ samples loaded in air. Slightly larger exotherms were observed for the HFC results in air than those in inert gas, suggesting some oxidation occurs. In contrast, no significant difference in the observed onset temperature of about 150°C was observed for both the HFC and ARC results. From DSC measurements, an Arrhenius activation energy for decomposition of 126±4 kJ mol⁻¹ was found. These measurements were also conducted in sealed glass systems and decomposition appeared to proceed primarily from the liquid phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermodynamics of the adsorption of different dyes onto bentonite modified with hexadecyltrimethylammonium cation

Removal of two different dyes: Acid Orange 10 (AO10) and Reactive Black 5 (RB5) from their aqueous solutions using organobentonite as adsorbent was investigated. The experiments were carried out at different temperatures (298, 313, 323, and 333 K) in order to obtain thermodynamic parameters for adsorbate/adsorbent system i.e., activation energy, Gibbs free energy, enthalpy and entropy. The results of thermodynamic studies indicated that the adsorption of both dyes onto organobentonite is an endothermic process, while the values for activation energies (76 kJ mol^?1 for AO10 and 51 kJ mol^?1 for RB5) indicated that chemisorption occurred.     

Kinetics of Formation of Potassium Hydroxyaluminosilicate in Aqueous KOH Solution

The time in which a supersaturated aqueous-alkaline aluminosilicate solution is stable to phasetransformation was studied in relation to the solution composition, temperature. Empirical equations weresuggested describing how the induction period of potassium hydroxyaluminosilicate formation depends on thesolution composition, temperature, and supersaturation factor. These equations allow prediction of the compositions of stable solutions and evaluation of the enthalpy (25.6 kJ mol^{- 1}) and entropy (126.2 J mol^{- 1} K^{- 1}) of solution, the activation energy (19.1 kJ mol^{- 1}) of formation of potassium hydroxyaluminosilicate KAlSiO(OH)₆, and the induction period of formation of the solid phase.     

Thermodynamic and kinetic behaviour of salicylsalicylic acid

The thermal behaviour of salicylsalicylic acid (CAS number 552-94-3) was studied by differential scanning calorimetry (DSC). The endothermic melting peak and the fingerprint of the glass transition were characterised at a heating rate of 10°C min^-1. The melting peak showed an onset at T _on = 144°C (417 K) and a maximum intensity at T _max = 152°C (425 K), while the onset of the glass transition signal was at T _on = 6°C. The melting enthalpy was found to be Δ_mH = 28.9±0.3 kJ mol^-1, and the heat capacity jump at the glass transition was ΔC _P = 108.1±0.1 J K^-1mol^-1. The study of the influence of the heating rate on the temperature location of the glass transition signal by DSC, allowed the determination of the activation energy at the glass transition temperature (245 kJ mol^-1), and the calculation of the fragility index of salicyl salicylate (m = 45). Finally, the standard molar enthalpy of formation of crystalline monoclinic salicylsalicylic acid at T = 298.15 K, was determined as Δ_fH_m ^o(C₁₄H₁₀O₅, cr) = - (837.6±3.3) kJ mol^-1, by combustion calorimetry. This revised version was published online in August 2006 with corrections to the Cover Date.     

The enthalpy of formation of tungsten azide pentafluoride

The enthalpy of hydrolysis of solid tungsten azide pentafluoride in alkaline aqueous solution (1.O mol dm^?3 KOH; 298.2K) is ?578 kJ mol^?1. Hence its enthalpy of formation is ?1170 kJ mol^?1.