Prediction of structure-dependent charge transfer rates for a Li atom outside a Si(0 0 1) surface

We investigate the broadening of the 2s energy level of a Li atom outside a Si(0 0 1) surface using a first principles approach. The covalent nature of the Si surface produces large variations in Li energy level widths as a function of lateral position across the surface. The widths above symmetric Si dimers are predicted to be much larger than above buckled Si dimers, suggesting that charge transfer will occur primarily above symmetric dimers. We discuss the ramifications of our results on the controversy surrounding the relative abundance of the buckled vs. symmetric dimers on the Si surface.     

Atoms interacting with a metal surface with adsorbates: local and non-local effects on the charge transfer

A model system representing a collisional Li atom interacting in the “on top” geometry with an Al surface partly covered with Li adsorbates is studied. The cases of a unique adsorbate and of a uniform adsorbate layer are considered and compared. The energies and widths of the atom levels are much modified in the vicinity of the adsorbate. This is interpreted in terms of molecularisation of the atomic and adsorbate levels. These results also determine the relative importance of the local and non-local effects of the adsorbates on the resonant charge transfer process in atom-surface collisions.     

Substitutional adsorption of K on Fe(100)

The adsorption of potassium on Fe(100) was studied by time-of-flight forward scattering and recoiling spectroscopy (TOF-SARS), low energy electron diffraction (LEED) and Auger electron spectroscopy (AES). After heating to 650 K of the potassium saturated surface the formation of a p(3 × 3) potassium superstructure was observed by LEED. TOF-SARS experiments ruled out the adsorption of potassium in the on-top, bridge and four-fold hollow site. The only site which is in agreement with all experimental results is the substitutional site where K replaces an Fe atom of the topmost layer of the crystal. This is the first time a substitutional adsorption site has been found on a bcc surface. On an fcc surface such an adsorption site has been found recently for adsorption of sodium and potassium on Al(111).     

The dynamical origin of non-normal energy scaling and the effect of surface temperature on the trapping of low molecular weight alkanes on Pt(111)

Molecular classical dynamical simulations of alkanes trapping on platinum surfaces were performed to examine the origin of non-normal energy scaling for molecular adsorption. Conversion of normal to parallel translational energy at normal incidence and conversion of parallel translational energy into normal translational energy at glancing angles are the primary mechanisms which produce non-normal energy scaling of alkanes trapping on cold Pt(111). In addition, a tendency to convert rotational energy gained in the first gas-surface collision into normal translational energy for collisions at glancing incidence further increases the degree of non-normal energy scaling. Increasing surface temperature is shown to have little effect on energy transfer processes in the first bounce but increasing influence on subsequent bounces. Despite difficulties in defining trapping at high surface temperatures, simulations indicate that the initial trapping probability of ethane on Pt(111) does not fall by more than a factor of two over the surface temperature range of 100–700 K.     

Dimer elongation on the monohydride-covered Ge/Si(100) surface

Using transmission ion channeling, we have made the first measurement of the Ge dimer geometry for the monohydride-covered Ge/Si(100)-2×1 surface. Comparison of calculated angular scans with experimental angular scans near the 100 and 110 directions has resulted in a measured Ge dimer bond length of 2.8 Å, which is 8% longer than the corresponding dimer bond length reported for Ge on Si(100) in the absence of H. This elongation is similar to that reported for Si dimers on the Si(100) surface. Also, relative to the (100) surface plane, the dimers change from tilted without H to untilted with H.     

In situ XPS study of Pd(1 1 1) oxidation. Part 1: 2D oxide formation in 10 mbar O2

The oxidation of the Pd(1 1 1) surface was studied by in situ XPS during heating and cooling in 3 × 10⁻³ mbar O₂. A number of adsorbed/dissolved oxygen species were identified by in situ XPS, such as the two dimensional surface oxide (Pd₅O₄), the supersaturated O_ads layer, dissolved oxygen and the R 12.2° surface structure.Exposure of the Pd(1 1 1) single crystal to 3 × 10⁻³ mbar O₂ at 425 K led to formation of the 2D oxide phase, which was in equilibrium with a supersaturated O_ads layer. The supersaturated O_ads layer was characterized by the O 1s core level peak at 530.37 eV. The 2D oxide, Pd₅O₄, was characterized by two O 1s components at 528.92 eV and 529.52 eV and by two oxygen-induced Pd 3d_5/2 components at 335.5 eV and 336.24 eV. During heating in 3 × 10⁻³ mbar O₂ the supersaturated O_ads layer disappeared whereas the fraction of the surface covered with the 2D oxide grew. The surface was completely covered with the 2D oxide between 600 K and 655 K. Depth profiling by photon energy variation confirmed the surface nature of the 2D oxide. The 2D oxide decomposed completely above 717 K. Diffusion of oxygen in the palladium bulk occurred at these temperatures. A substantial oxygen signal assigned to the dissolved species was detected even at 923 K. The dissolved oxygen was characterised by the O 1s core level peak at 528.98 eV. The “bulk” nature of the dissolved oxygen species was verified by depth profiling.During cooling in 3 × 10⁻³ mbar O₂, the oxidised Pd²⁺ species appeared at 788 K whereas the 2D oxide decomposed at 717 K during heating. The surface oxidised states exhibited an inverse hysteresis. The oxidised palladium state observed during cooling was assigned to a new oxide phase, probably the R 12.2° structure.     

A temperature programmed desorption study of the reaction of methylacetylene on Pt(111) and Sn/Pt(111) surface alloys

The adsorption and reaction of methylacetylene (H₃CC≡CH) on Pt(111) and the p(2×2) and

Full-size image

surface alloys were investigated with temperature programmed desorption, Auger electron spectroscopy and low energy electron diffraction. Hydrogenation of methylacetylene to form propylene is the most favored reaction pathway on all three surfaces accounting for ca 20% of the adsorbed monolayer. Addition of Sn to the Pt(111) surface to form these two ordered surface alloys suppresses the decomposition of methylacetylene to surface carbon. The alloy surfaces also greatly increase the amount of reversibly adsorbed methylacetylene, from none on Pt(111) to 60% of the adsorbed layer on the

Full-size image

surface alloy. Methylacetylene reaction also leads to a small amount of desorption of benzene, along with butane, butene, isobutylene and ethylene. There is some difference in the yield of these other reaction products depending the Sn concentration, with the (2×2)-Sn/Pt(111) surface alloy having the highest selectivity for these. Despite previous experiments showing cyclotrimerization of acetylene to form benzene on the Pt–Sn surface alloys, the analogous reaction of methylacetylene on the alloy surfaces was not observed, that is, cyclotrimerization of methylacetylene to form trimethylbenzene. It is proposed that this and the high yield of propylene is due to facile dehydrogenation of methylacetylene because of the relatively weak H–CH₂CCH bond compared to acetylene. The desorption of several C₄ hydrocarbon products at low (<170 K) temperature indicates that some minor pathway involving C–C bond breaking is possible on these surfaces.     

Morphological change of D2O layers on Ru(0 0 0 1) probed with He atom scattering

The morphological change of D₂O layers on a Ru(0 0 0 1) surface has been investigated on the basis of He atom scattering. With the increase of D₂O exposure on Ru(0 0 0 1) at 111 K, the intensity of a specularly reflected He beam continuously decreases up to the exposure of 1.0 L (Langmuir). At the D₂O coverage of 1.0 adsorbed layer (∼1.5 L), which is characterized by temperature-programmed desorption measurements, the formation of the (√3 × √3)R30° superstructure as a result of the diffusion of D₂O on the surface was confirmed by He atom diffraction. With the further increase of D₂O exposure, at 2-3 adsorbed layers, the disordered structure was found to be on the surface at 111 K. The morphological change of the disordered layers was observed during annealing, and discussed in detail.     

EELS studies of surface phonons on Ag(111)

High-resolution electron energy loss spectroscopy is used to study surface phonons in the direction of qG on Ag(111). The gap mode (S₂) at in the surface Brillouin zone is measured for the first time. We have also measured the Rayleigh mode and the resonance mode up to the zone boundary. The results are complementary to the earlier He atom scattering measurements and are in good agreement with the first-principles calculations performed recently.     

Enhanced reactivity and selectivity in oxidation of Cu(1 0 0) and α-Cu-Al(5 at.%)(1 0 0) surfaces studied by electron and ion spectroscopies

In this study we investigate the influence of alloying on the reactivity and bonding of oxygen on α-Cu-Al(5 at.%)(1 0 0) oriented single crystal surfaces by X-ray photoelectron spectroscopy (XPS), ultra-violet spectroscopy (UPS) and low energy ion scattering (LEIS) spectroscopy, at room temperature. It was found that alloying results in an enhanced reactivity of both Cu and Al sites in comparison with the pure metals. According to adsorption curves calculated from XPS, saturation of the alloy surface occurs for exposures of ∼15 L. At saturation the total amount of adsorbed oxygen is similar for the alloy and pure copper surfaces. It was determined that first mostly Al sites are oxidized, followed by simultaneous oxidation of Cu and Al sites. At saturation the amount of oxygen bonded to Cu sites is ∼1.7 larger then that bonded to Al sites. From a comparison of the XPS and LEIS data analysis as a function of oxygen exposure it was found that oxidation of α-Cu-Al(5 at.%)(1 0 0) alloy is a multi-stage process with fast and slow stages. These stages involve an interplay of chemisorption, sub-surface diffusion of oxygen and Al segregation. UPS measurements show an increase in the work function of the alloy surface with oxygen adsorption. This is a contrast to pure Cu surfaces where the work function decreases at the initial stages of oxidation followed by an increase with oxygen exposure. Annealing to 400 °C drives the oxidized alloy surface into its thermodynamic state resulting in the formation of an aluminum oxide layer. Possible mechanisms to explain the enhanced reactivity of the alloy surface compared to that of pure copper are suggested and discussed.     

Interaction of NO with CO on Pd(100): ordered coadsorption structures and explosive reaction

An ordered mixed structure of c(3 × 2) is formed for a (NO + CO) coadsorption layer. The c(3 × 2) islands are considered to consist of equimolar NO and CO. The local fractional coverage (θ_NO + θ_CO) in the domain is estimated to be 0.33. Explosive production of CO₂ takes place in the c(3 × 2) islands. The vacancy requirement model is considered to be valid for the autocatalytic reaction. Since the reaction is not accompanied with any substrate reconstruction, the autocatalytic behaviour is attributed only to the formation of mixed islands. The desorption of N₂ follows, however, the second-order kinetics on Pd(100). As a result of the competition between NO and CO for the surface electrons, the CO-metal bond is weakened by the coadsorbed NO, which influences the explosive reaction. On the other hand, strengthening of the NO-metal bond is observed. When NO is in excess of CO, a p(3 × 2) structure coexists with the c(3 × 2) structure. The local coverage in the p(3 × 2) islands is estimated to be 0.33. In this coverage region, another path for the CO₂ production is available.     

Internal charge distribution of iodine adatoms on silicon and silicon oxide investigated with alkali ion scattering

Time-of-flight spectra were collected for low energy ⁷Li⁺ and ²³Na⁺ ions backscattered from Si(1 1 1) surfaces covered with sub-monolayers of iodine. Li ions singly scattered from the iodine adatoms have consistently larger neutralization probabilities than those scattered from the silicon substrate, and the neutralization decreases with off-normal emission. This indicates that the internal charge distribution of the iodine adatoms is not uniform, presumably due to attraction of electron density to the positively charged bonding Si atom. Photoelectron spectroscopy shows that iodine adsorbed on pre-oxidized Si bonds through the oxygen atom, forming hypoiodite (-OI) moieties. The neutralization of ²³Na⁺ backscattered from such iodine adatoms is independent of the emission angle, indicating that there is less charge rearrangement than for iodine bonded directly to Si.     

Adsorption of hydrogen and of oxygen on an open metal surface-HREELS investigation at Ni(311)

The adsorption behavior of hydrogen and oxygen on the stepped Ni(311) surface has been investigated by HREELS. A series of metastable phases was found for hydrogen adsorption at low temperatures with a succession of different adsorption sites indicated by the following loss peaks: 55 and 149 meV for the threefold site, shifting with higher coverage to 65 and 155 meV, respectively; 40 and 90 meV for the fourfold site, shifting to 35 and 85 meV with coverage; and 110 and 124 meV for an additional site between close packed rows. Room temperature adsorption of hydrogen leads to the reconstruction of the surface with occupation of three- and fourfold sites, represented by loss peaks at 60 and 145 meV for the threefold site and 74 meV for the fourfold site. This phase is the thermodynamically stable one. Oxygen is most likely initially adsorbed on a bridge site (loss peak at 66 meV). The stepped surface is already oxidized at very low exposures to oxygen, as seen by the characteristic vibration for oxide islands at 55 meV and later by the Fuchs-Kliewer mode of NiO at 68 meV.     

NO adsorption on the Rh(110) surface: kinetics and composition of the adlayer studied by fast XPS

The adsorption and dissociation of NO on the Rh(110) surface were studied by synchrotron radiation X-ray photoemission spectroscopy at temperatures in the range 210–370 K. The O 1s or N 1s spectra were collected every 14 s while the surface was continuously exposed to a steady NO gas pressure. The difference in the binding energies for the atomic oxygen (O 1s ≤530.2 eV), atomic nitrogen (N 1s 397.2 eV) and molecular upright bonded NO molecules (O 1s ≥531.0 eV and N 1s 400 eV) allowed us to distinguish these surface species and to follow the evolution of the adsorbate layer. In addition to these dominating surface species a new species, characterized by O 1s binding energy of 530.7 eV and N 1s binding energy similar to that of the atomic nitrogen, was detected within a narrow coverage range. This state is tentatively assigned to a “lying down” NO bonding configuration, detectable at the timescale of the measurements. The uptake plots, constructed using the integrated intensity of the deconvoluted O 1s and N 1s spectra, are used to elucidate the effect of the reaction temperature and surface coverage and composition on the kinetics of dissociative and molecular NO adsorption of Rh(110).     

Initial incorporation of sulfur into the Pd(1 1 1) surface: A theoretical study

Density functional theory is used to investigate the initial inclusion of sulfur into the subsurface interstitial sites of Pd(1 1 1) surface. Pure subsurface adsorption is found to be less energetically favorable than on-surface adsorption. The incorporation of sulfur into the metal becomes more favorable than continuous adsorption on the surface after a critical on-surface sulfur coverage. We find subsurface sulfur occupation to be energetically favorable after adsorption of more than half a monolayer on the surface. Occupation of subsurface sites induces a pronounced structural distortion of the Pd(1 1 1) surface. We find significant expansion of interplanar spacing between the uppermost surface metal layers and rearrangement of the S overlayer. The interplay between the energy cost due to structural distortion of Pd(1 1 1) and the energy gain due to bond formation for different structures is discussed.     

Oxidation of the hydrogenated diamond (100) surface

The surface composition and structure of natural diamond (100) surfaces subsequently oxidized with activated oxygen at T_sub≤35°C were investigated with high-resolution electron energy loss spectroscopy (HREELS), Auger electron spectroscopy, electron loss spectroscopy (ELS) and low-energy electron diffraction (LEED). Complete surface oxidation (oxygen coverage θ=1 ML) required doses of hundreds of kilolangmuirs of O₂. HREELS vibrational spectra permitted identification of the specific surface oxygen species, and also provided information about the diamond surface states. Most surface sites lost their hydrogen at least once before becoming oxidized. The oxygen coverage θ increased quickly at first, and then more slowly as saturation was approached; different mechanisms or sites may have accounted for the decreased rate. The relative distribution of oxygen species varied with the oxidation conditions. Ether, carbonyl and hydroxyl groups appeared during the initial stages of oxidation, but the hydroxyl groups disappeared at higher coverages. Bridge-bonded ether groups dominated at saturation coverage, although smaller amounts of carbonyl and hydroxyl were still observed. The carbonyl and C---H stretch frequencies increased with oxygen dose due to formation of higher oxidation states and/or hydrogen bonding between adjacent groups. ELS revealed only a low concentration of C=C dimers on the oxidized surfaces, and no evidence of graphitization.

Surfaces generated by oxygen addition and then desorption were more reactive than surfaces generated by hydrogen desorption. Oxidized surfaces that were heated in vacuum and then rehydrogenated did not recover the sharp LEED patterns and HREELS spectra of the original plasma-smoothed surface. This effect was presumably due to surface roughening caused by oxygen desorption as CO and CO₂, and creation of reactive high-energy sites that quickly bonded to available background gases and prevented large areas of organized surface reconstruction.     

Structure and composition of the NiPd(1 1 0) surface

The NiPd(1 1 0) alloy surface was studied using low energy electron diffraction to measure the structure and composition of the first three atomic layers. The surface layer is highly enriched in Pd and has a significantly buckled structure. The second layer is also buckled, with displacements even larger than the surface layer. The second layer also exhibits intralayer segregation (chemical ordering), with alternate close-packed rows of atoms being Ni enriched and Pd enriched. The third layer has a structure and composition close to that of the bulk alloy. These results are compared with results for the other low index faces of NiPd, the extensive literature on NiPt alloy surfaces, and the growing body of theoretical literature for NiPd alloy surfaces.     

Simulated reaction dynamics of F atoms on partially fluorinated Si(100) surfaces

We have investigated the influence of translational excitation on the reactivity of atomic fluorine with the Si(100) surface via molecular dynamics simulations using a first-principles-derived interaction potential. Surface reactivity is contrasted for both clean and partially fluorinated surfaces with the results of previous simulations of F₂ molecules impinging on Si(100) surfaces, indicating many similarities between the dynamics of F atoms and F₂ molecules. Mechanisms for the reaction are proposed based on reactivity trends and scattered product energy and angular distributions, including evidence for the existence of a precursor-mediated adsorption pathway for low incident energy F atoms on partially fluorinated surfaces.     

In situ XPS study of Pd(1 1 1) oxidation at elevated pressure, Part 2: Palladium oxidation in the 10 mbar range

The oxidation of the Pd(1 1 1) surface was studied by in situ XPS during heating and cooling in 0.4 mbar O₂. The in situ XPS data were complemented by ex situ TPD results. A number of oxygen species and oxidation states of palladium were observed in situ and ex situ. At 430 K, the Pd(1 1 1) surface was covered by a 2D oxide and by a supersaturated O_ads layer. The supersaturated O_ads layer transforms into the Pd₅O₄ phase upon heating and disappears completely at approximately 470 K. Simultaneously, small clusters of PdO, PdO seeds, are formed. Above 655 K, the bulk PdO phase appears and this phase decomposes completely at 815 K. Decomposition of the bulk oxide is followed by oxygen dissolution in the near-surface region and in the bulk. The oxygen species dissolved in the bulk is more favoured at high temperatures because oxygen cannot accumulate in the near-surface region and diffusion shifts the equilibrium towards the bulk species. The saturation of the bulk “reservoir” with oxygen leads to increasing the uptake of the near-surface region species. Surprisingly, the bulk PdO phase does not form during cooling in 0.4 mbar O₂, but the Pd₅O₄ phase appears below 745 K. This is proposed to be due to a kinetic limitation of PdO formation because at high temperature the rate of PdO seed formation is compatible with the rate of decomposition.