Supercritical fluid extraction of triazine herbicides from solid matrices

Summary Several investigations were performed to optimise the extraction of polar triazine herbicides using supercritical fluid extraction from two different solid matrices: C₁₈-silica and soil samples. Supercritical CO₂ modified with methanol [10% (VV)] at 250 bars and 50°C was required to quantitatively extract Atrazine and 2-Hydroxyatrazine from spiked C₁₈-silica. Extraction of Desisopropyl-desethyl-2-hydroxyatrazine (MET) attained only 52%, even following addition of water to the polar modifier. Extractions of spiked soil samples (20 ppm of each pesticide) were successful at 300 bars and 65°C. A non polar wash improved the recoveries of the three target analytes [i.e. atrazine: 88%; 2-hydroxyatrazine: 96%; MET: 41%]. The extraction parameters employed are discussed in this paper.     

Liquid trapping after supercritical fluid extraction with modified carbon dioxide

A polarity test mix consisting of acetophenone, N,N-dimethylaniline, naphthalene, 2-naphthol, and n-tetracosane was spiked onto sand and extracted with carbon dioxide modified with acetonitrile, methanol, or toluene. The extracts were collected in chloroform, hexane, methanol, or a mixed collection solvent consisting of equal parts chloroform-hexane-methanol. The mixed collection solvent which showed excellent recoveries for pure CO₂, had the worst recoveries of all the collection solvents with modified CO₂. Overall hexane was the best collection solvent studied for these analytes under these extraction conditions.     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

Determination of anabolic steroids in creatine nutritional supplements after supercritical fluid extraction

The effects of various parameters, i.e. extraction pressure, temperature, time, and modifier on the efficiency of extraction were investigated using an analytical-scale supercritical fluid extraction system. An optimal set of conditions for the extraction and determination by gas chromatography-mass spectrometry of trimethylsilyl derivatives of 4-androstene-3,17-dione, 1,4-androstadiene-3,17-dione, nandrolone, and testosterone in nutritional supplements was developed. The optimum amount of creatine supplement was 1 g, while the optimum pressure and temperature were determined to be 35 MPa and 80 °C, respectively. The optimum dynamic extraction time was 45 min. The limit of detection (LOD) of the investigated compounds ranged from 5 to 25 ng · g⁻¹ of supplement, while recoveries ranged from 76.1 to 86.6%. Correspondence: Petra Mikulcikova, Department of Analytical Chemistry, Faculty of Chemical Technology, University of Pardubice, nám. Cs. Legií 565, CZ 532 10 Pardubice, Czech Republic     

Supercritical fluid extraction of PCBs in tandem with high resolution gas chromatography in environmental analysis

A simple method has been developed for the direct coupling of supercritical fluid extractions (SFE) with a high resolution gas chromatograph (HRGC) equipped with an electron capture detector (ECD). SFE conditions have been investigated for polychlorinated biphenyls (PCBs) from sediments in terms of mobile phase, entrainer, pressure, temperature, and mass-flow through the extractor. Dynamic leaching and static steady-state extractions were compared. Extraction efficiencies of up to 100% in less than 15 minutes have been obtained. The extracted PCBs are quantitatively transferred into a fused silica open tubular column (OTC). Determination of PCBs was tested on certified sediment from National Water Research Institute and the results agreed well with certified values.     

Supercritical fluid extraction of oxadixyl from food crops

Summary This work describes the study of a degradation curve of Oxadixyl in field-treated potato and tomato samples. The residues were extracted using classical and supercritical fluid (SFE) extraction methods and analyzed by HRGC/ECD. The extraction techniques were compared and the results indicate the advantages of using SFE as an alternative method for pesticide analyses in these samples.     

Supercritical fluid extraction of polychlorinated dibenzo-p-dioxins from municipal incinerator fly ash

The supercritical fluid extraction of polychlorinated dibenzo-p-dioxins from an incinerator fly ash sample has been investigated; supercritical nitrous oxide and its mixtures with methanol and toluene were employed as mobile phases. Recoveries of individual polychlorinated dibenzo-p-dioxins congeners were calculated from results of analysis of ¹³C-labeled dioxins by high resolution GC-MS employing selected ion monitoring. The extraction procedure was compared with extraction in a Soxhlet apparatus, which is currently used as a standard method for removing chlorinated dibenzo-p-dioxins from fly ash samples: the results indicated that the time required for the extraction and clean-up can be reduced from 24 to 2.5 hours/sample. Quantitative recovery of the chlorinated dibenzo-p-dioxins was achieved at μg/kg levels, the relative standard deviation was between 1.8 and 5.8%. The use of a virtually inert fluid such as pure nitrous oxide provides significant improvement over conventional extraction procedures because no solvent residue is left in the processed extract.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Development of a method for the rapid determination of pentachlorophenol in leather using supercritical fluid extraction with in situ derivatization

Pentachlorophenol (PCP) was extracted from leather with supercritical carbon dioxide and in situ acetylated under static SFE conditions in the presence of triethylamine. During the dynamic extraction step, the derivatives were removed from the matrix and collected with either a pure liquid (light petroleum) or a liquid-solid (light petroleum-solid sorbent (C18, alumina, Florisil or Celite)) trap. To prevent restrictor plugging, a suitable restrictor was designed. The clean-up of the extracts was optimized in this study. Different internal standards were tested and it was shown that not all of them were usable. The SFE results were compared with those obtained by Soxhlet extraction with methanol. With SFE instead of conventional Soxhlet extraction, the overall time required for determination of PCP in leather can be reduced from about 2 days to approx. 3 hours.     

Supercritical fluid extraction of oxindole alkaloids from Uncaria tormentosa

Supercritical fluid extraction of oxindole alkaloids from Uncaria Tormentosa is described. The extraction was performed with supercritical carbon dioxide alone and with supercritical carbon dioxide modified with 10% metanol, and the extracts were analyzed by GC/MS and HPLC/MS.     

Supercritical fluid extraction and gas chromatography analysis of arsenic species from solid matrices

A method in combination with derivatization-supercritical fluid extraction(SFE) and gas chromatography(GC) for the speciation and quantitative determination of dimethylarsinate(DMA), monomethylarsonate(MMA) and inorganic arsenic in solid matrices was investigated. Thioglycolic acid methyl ester(TGM) and thioglycolic acid ethyl ester(TGE) were evaluated as derivatization reagents. The effects of pressure, temperature, flow rate of supercritical CO_2, extraction time, modifier and microemulsion on the efficiency of extraction were systematically investigated. The procedure was applied to the analysis of real soil and sediment samples. Results showed that TGE was more effective for arsenic speciation as a derivatization reagent. Modifying supercritical CO_2 with methanol can greatly improve the extraction efficiency. Further, the addition of microemulsion containing surfactant Triton X-100 can further enhance recoveries of arsenic species. The optimum extraction conditions were 100 ℃, 30 MPa, 10 min static and 25 min dynamic extraction with 5%(v/v) methanol, and surfactant modified supercritical CO_2. Detection limits in solid matrices were 0.15, 0.3 and 1.2 mg/kg for DMA, MMA and inorganic arsenic,respectively. The method was validated by the recovery data. The resulting method was fast, easy to perform and selective in the extraction and detection of various arsenic species in solid matrices.     

Use of modifiers in on-line and off-line supercritical fluid extraction

For many applications using supercritical fluid extraction (SFE), modifiers may be required.This paper will present some findings regarding the use of various modifiers including methanol, hexane, acetone, chloroform, dichloromethane, toluene, and tributylphosphate, in on-line and off-line SFE with cryogenic adsorbent trapping. The specific applications involved the extractions of petroleum hydrocarbons and pesticides from naturally incurred soils.     

Supercritical fluid extraction of flumetralin in tobacco

Summary This work evaluates the level of Flumetralin residues in real tobacco samples. Conventional extraction methods were compared with SFE methods in both static and dynamic modes using CO₂ and CO₂ with modifier. Additionally, in the dynamic SFE mode, different collection approaches, such as collection at room temperature without solvent, collection at room temperature in the presence of solvent (hexane) and collection in an ice bath, without solvent, were studied. SFE showed itself to be a promising extraction technique for pesticide residues in tobacco samples.     

On-Line coupling of supercritical fluid extraction with high performance liquid chromatography

Supercritical fluid extraction was coupled directly with high performance liquid chromatograph. The system was evaluated for direct injection of supercritical CO₂ and modified supercritical CO₂ at high pressure and temperature onto a HPLC system with varying mobile phase compositions and flow rates. Injection of 9 μL supercritical CO₂ onto the HPLC using methanol/water mobile phases from 100% methanol to 80% with a flow of 1.0 mL/min did not adversely affect the baseline of UV detector. However at higher percentages of water, CO₂ solubility in the mobile phase decreased and caused baseline interferences on the UV detector. At higher HPLC mobile phase flow rates, supercritical CO₂ was injected to higher percentages of water without any effect on the UV baseline. Also, increasing the extraction pressure or modifier concentration did not change the results. Separations of polynuclear aromatic hydrocarbons and linear alkenebenzene sulfonate test mixtures were obtained using on-line SFE/HPLC interfaced system.     

Direct coupling of capillary supercritical fluid chromatography with supercritical fluid extraction using modified carbon dioxide

Capillary supercritical fluid chromatography has been directly coupled with supercritical fluid extraction using modified carbon dioxide. The mixed fluids were prepared with a single pump on-line mixing system. The most important step in the SFE-SFC interface was the elimination of the modifier solvent. This was achieved by use of a coupled trap, 0.1 mm i.d. and 0.53 mm i.d. capillary tubing connected in series, with the collected solutes refocused on the second (0.53 mm i.d.) trap before transfer into the separation column. This enabled complete elimination of various modifier solvents and high efficiency collection of the solutes. The effect of the modifier on trapping efficiency was investigated using methanol, ethanol, dichloromethane, hexane, and toluene at a variety of concentrations. n-Eicosane was, for example, trapped quantitatively by modified carbon dioxide containing up to 13 % (w/w) methanol. The use of the technique has been demonstrated by selective extraction of n-paraffins, fatty acid methyl esters, and alcohols from a silica matrix; the effect of different modifiers on the extraction of a mixture of pesticides from soil has also been investigated.