The interaction of Bromophenol Blue with proteins in acidic solution

The interactions of Bromophenol Blue (BPB) with bovine serum albumin and gamma-globulin in acidic solutions were investigated by a spectrophotometric method. It was considered that the electrostatic force is the main binding force, and that the color change during the combination is due to the transformation of dye species of free acidic form into bound basic form as well as to the bathochromic and hyperchromic effects of conjugation. The formation of an isosbestic point in the absorption spectra was explained based on a new consideration about the solution equilibria. Two conditional constants, apparent binding constant and maximum binding number, were defined to express the binding ability of a dye to a certain protein under a given set of conditions, and two linear regression equations were derived to determine these two parameters and the molar absorptivity of bound dye. The Scatchard model is not appropriate in the treatment of data obtained here. The factors which influence the sensitivity of a dye binding protein assay were discussed, and the Sandell index was used to express the sensitivity of protein detection. It was found that sodium chloride concentration and acidity of the solutions have significant effect on the sensitivity of BPB protein assay.     

Polypyrrole-coated cotton textile as adsorbent of methylene blue dye

Pollution caused by organic dyes is of serious environmental and health concern to the population. Dyes are widely used in textile coloring applications. In the present work, cotton textile was coated with a conducting polymer, polypyrrole (PPy), in situ during the oxidative polymerization of pyrrole. The resulting materials were utilized as easily separated and recyclable adsorbent for the removal of methylene blue (MB) as a model of cationic dyes in alkaline solutions. It showed also some affinity to remove Acid Green 25 as an anionic dye in acidic medium. The adsorption was assessed by monitoring the decrease in dye concentration by UV–Visible absorption spectroscopy. The influence of various parameters such as initial dye concentration, contact time, pH, temperature, and adsorbent dose on the adsorption process was studied. The pseudo-second-order kinetic model and Freundlich isotherm model were found to describe the adsorption process. The thermodynamic study revealed that the adsorption of MB by PPy was feasible, spontaneous, and exothermic process. Investigation of the substrate regeneration revealed that PPy deposited on cotton textile can be reused for dye adsorption several times with good efficiency and it allows for the recovery of MB for recycling purposes.     

Determination of textile dyes by means of non-aqueous capillary electrophoresis with electrochemical detection

Eight textile dye compounds including five cationic dyes, namely, basic blue 41, basic blue 9, basic green 4, basic violet 16 and basic violet 3, and three anionic dyes, acid green 25, acid red 1 and acid blue 324, were separated and detected by non-aqueous capillary electrophoresis (NACE) with electrochemical detection. Simultaneous separations of acid and basic dyes were performed using an acetonitrile-based buffer. Particular attention was paid to the determination of basic textile dyes. The optimized electrophoresis buffer for the separation of basic dyes was a solvent mixture of acetonitrile/methanol (75:25, v/v) containing 1 M acetic acid and 10 mM sodium acetate. The limits of detection for the basic dyes were in the range of 0.1–0.7 μg mL⁻¹. An appropriate solid-phase extraction procedure was developed for the pre-treatment of aqueous samples with different matrices. This analytical approach was successfully applied to various water samples including river and lake water which were spiked with textile dyes.     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Adsorption of Reactive Blue 4 dye from water solutions by carbon nanotubes: experiment and theory

Multi-walled and single-walled carbon nanotubes were used as nanoadsorbents for the successful removal of Reactive Blue 4 textile dye from aqueous solutions. The adsorbents were characterised by infrared and Raman spectroscopy, N(2) adsorption/desorption isotherms and scanning and transmission electron microscopy. The effects of pH, shaking time and temperature on adsorption capacity were studied. In the acidic pH region (pH 2.0), the adsorption of the dye was favourable using both adsorbents. The contact time to obtain equilibrium isotherms at 298-323 K was fixed at 4 hours for both adsorbents. The general order kinetic model provided the best fit to the experimental data compared with pseudo-first order and pseudo-second order kinetic adsorption models. For Reactive Blue 4 dye, the equilibrium data (298 to 323 K) were best fitted to the Liu isotherm model. The maximum sorption capacity for adsorption of the dye occurred at 323 K, attaining values of 502.5 and 567.7 mg g(-1) for MWCNT and SWCNT, respectively. Simulated dyehouse effluents were used to check the applicability of the proposed nanoadsorbents for effluent treatment (removal of 99.89% and 99.98%, for MWCNT and SWCNT, respectively). The interaction of Reactive Blue 4 textile dye with single-walled carbon nanotubes (SWCNTs) was investigated using first principles calculations based on density functional theory. Results from ab initio calculations indicated that Reactive Blue 4 textile dye could be adsorbed on SWCNT through an electrostatic interaction; these results are in agreement with the experimental predictions.     

Protein and Dye Adsorption on Poly(ethylene terephthalate) Nucleopore Membranes Modified with Polymers

Adsorption of basic, neutral, and acidic proteins on poly(ethylene terephthalate) nucleopore membranes was studied as a function of solution pH. Higher adsorption values were observed for basic and neutral proteins and lower, for acidic proteins. The value of pH corresponding to maximal adsorption was somewhat lower than the isoelectric points of proteins, thus suggesting that the adsorption was governed by a combination of ionic and hydrophobic interactions between proteins and the membrane surface. Proteins were adsorbed in an associated form. Membrane surface was modified with poly(ethylene imine) and poly(ethylene glycol). Combined modification of the membranes with these polymers was found to substantially decrease the adsorption of basic and neutral proteins, as well as basic dye and to slightly increase the adsorption of acidic proteins. The modifying coating had a high hydrolytic stability.     

Quantitative analysis of enzymatic assays using indoxyl-based substrates

Hydrolysis of indoxyl-based substrates by hydrolytic enzymes is a commonly used semiquantitative detection system that generates a water-insoluble indigo dye which is difficult to quantify. This work describes the quantitative analysis and enzyme kinetics for alkaline phosphatase (AP) and 5-bromo-4-chloro-3-indoxyl phosphate (BCIP) in solution obtained by applying known solubilization methodology from the textiles industry to the enzymatic product. This proposal is based on the reduction of the tetrahalo-indigo blue dye in a basic medium with the aim of generating its aqueous-soluble parent compound termed indigo white, which gives a rich yellow color in solution and is fluorescent. A quantitative ELISA (where a soluble end product is required) is accomplished for first time using BCIP as substrate.     

Spectrophotometric determination of arsenic in water samples based on micro particle formation of ethyl violet-molybdoarsenate.

In this study, a simple and sensitive method for the determination of arsenic in water samples was developed. The method is based on the formation of micro particles of Ethyl Violet and molybdoarsenate, which gives an apparently homogeneous blue color to the solution. The absorption of the excess dye gradually decreases due to its conversion to a colorless carbinol species under strongly acidic conditions. Consequently, the sufficiently low reagent blank enables the spectrophotometric determination of arsenic with the detection limit of 4 microg l(-1). The coefficient of variation for the spectrophotometry at 50 microg l(-1) was 3.5% (n = 5). Furthermore, it is possible to detect concentrations as low as 10 microg l(-1) of arsenic visually. Our method will be useful as a simple, rapid, and cost-effective field test of arsenic, requiring no complex apparatus or skilled laboratory support.     

Stabilization of dyes against hydrolytic decomposition by the formation of inclusion compounds

The decomposition reactions of the dyes phenol blue and murexide were measured spectroscopically in acidic solution at different temperatures. From these reaction rates and their temperature dependence in the absence and presence of various hosts, the stability constants and the reaction enthalpies of the dye complexes with noncyclic dextrins, cyclodextrins and cucurbituril were calculated.-Cyclodextrin enhances the stability of phenol blue in acidic solution. This effect is even more pronounced with cucurbituril. Due to the molecular structure of murexide this dye cannot form inclusion complexes with hosts containing hydrophobic cavities.     

Preparation for Magnetic Nanoparticles Fe3O4 and Fe3O4@SiO2 and Heterogeneous Fenton Catalytic Degradation of Methylene Blue

Dyestuff textile wastewater treatment has become a research hotspot due to its high chroma, poor biodegradability, and low toxicity characteristics. In this paper, we have synthesized magnetic Fe₃O₄ and core‐shell Fe₃O₄@SiO₂ materials by hydrothermal methods. These materials were characterized by XRD, TEM, N₂ adsorption‐desorption and so on. These materials’ heterogeneous Fenton has been applied to dye wastewater treatment. Methylene blue was used as a typical target of dye wastewater. Decolorization ratios of methylene blue were determined by different nanostructure composites catalysts. A serious of results of study showed that decolorization ratios of magnetic nanoparticles and core‐shell composites arrived at above 90 % under the weakly acidic or neutral conditions and room temperature. When these catalysts were reused, the results show that Fe₃O₄@SiO₂ materials were possessed with good cycle performance.     

CuNPs as an activator of K2S2O8 for the decolorization of diazo dye in aqueous solution

Degradation of trypan blue (TB) by persulfate/CuNPs system was investigated as a function of TB concentration, persulfate concentration, CuNPs concentration, pH, and reaction temperature in aqueous solution. The rate of the decolorization and destruction of aromatic ring were studied spectrophotometrically. The dye mineralization was performed with potassium dichromate for the determination of chemical oxygen demand (COD) in solution. The blue color reaction mixture became red-chocolate, purple, light blue to dark blue as a function of time. The CuNPs acted as an activator of K₂S₂O₈ and generates various reactive oxygen and/or sulphur species. Decolorization of dye starts due to the cleavage of azo bond by the generated radical species. The role of sulfate radicals (SO₄^?-), and hydroxyl radicals (HO^?) were established by using different radical scavengers. Degradation and mineralization of dye follows first-order kinetics. These results can support the design of remediation processes and also assist in predict their fate in environment.     

Spectrophotometric determination of paracetamol in urine with tetrahydroxycalix[4]arene as a coupling reagent and preconcentration with triton X-114 using cloud point extraction

In the present paper, conventional spectrophotometry in conjunction with cloud point extraction-preconcentration were investigated as alternative methods for paracetamol (PCT) assay in urine samples. Cloud point extraction (CPE) was employed for the preconcentration of p-aminophenol (PAP) prior to spectrophotometric determination using the non-ionic surfactant Triton X-114 (TX-114) as an extractant. The developed methods were based on acidic hydrolysis of PCT to PAP, which reacted at room temperature with 25,26,27,28-tetrahydroxycalix[4]arene (CAL4) in the presence of an oxidant (KIO(4)) to form an blue colored product. The PAP-CAL4 blue dye formed was subsequently entrapped in the surfactant micelles of Triton X-114. Cloud point phase separation with the aid of Triton X-114 induced by addition of Na(2)SO(4) solution was performed at room temperature as an advantage over other CPE assays requiring elevated temperatures. The 580 nm-absorbance maximum of the formed product was shifted bathochromically to 590 nm with CPE. The working range of 1.5-12 mug ml(-1) achieved by conventional spectrophotometry was reduced down to 0.14-1.5 mug ml(-1) with cloud point extraction, which was lower than those of most literature flow-through assays that also suffer from nonspecific absorption in the UV region. By preconcentrating 10 ml sample solution, a detection limit as low as 40.0 ng ml(-1) was obtained after a single-step extraction, achieving a preconcentration factor of 10. The stoichiometric composition of the dye was found to be 1 : 4 (PAP : CAL4). The impact of a number of parameters such as concentrations of CAL4, KIO(4), Triton X-100 (TX-100), and TX-114, extraction temperature, time periods for incubation and centrifugation, and sample volume were investigated in detail. The determination of PAP in the presence of paracetamol in micellar systems under these conditions is limited. The established procedures were successfully adopted for the determination of PCT in urine samples. Since the drug is rapidly absorbed and excreted largely in urine and its high doses have been associated with lethal hepatic necrosis and renal failure, development of a rapid, sensitive and selective assay of PCT is of vital importance for fast urinary screening and antidote administration before applying more sophisticated, but costly and laborious hyphenated instrumental techniques of HPLC-SPE-NMR-MS.     

Study on Cyclometalated Palladium-azo Complexes as Colorimetric Probes for Hazardous Gas in Water

A synthesized cyclometalated palladium-azo complex was explored as a multifunctional probe for visual detection of SO2, H2S and NH3 in water. In acidic aqueous environment, the sensing solution underwent a sharp color change from poor violet to deep blue when titrated with Na2SO3 standard solution. But the color changed from poor violet to bright yellow when titrated with Na2S standard solution. In basic environment, the sensing solution rapidly changed to magenta when titrated by NH4Cl-NH3 standard buffer solution at high concentration. However, the color of sensing solution changed to blue when titrated by NH4Cl-NH3 standard buffer solution at low concentration although the pH was kept constant during the titration. Different species of these hazardous gases at environmentally relevant concentration levels were differentiated by independent optical signal outputs, and the interference from other inorganic ions commonly existing in water was very small.     

Solvent effect on the electronic spectra of azine dyes under alkaline condition

Thiazine dye, methylene blue (MB), oxazine dye, nile blue (NB), and phenazine-based dye, neutral red (NR), bear a similar basic dye skeleton with a distinctively different central heteroatom. All of them are extracted into nonpolar organic solvent from alkaline solution. The role of the heteroatom on the respective dye skeletons and redox potentials of the dyes has been examined to signature the stability of the species in organic solvent and the results have been substantiated through geometry optimization and wave function analysis at the density functional theory level. The effect of solvent polarity on the electronic absorption spectra of the three nonionic benzenoid species has been investigated with an intention to investigate the solvatochromic behavior of these compounds.     

Spectrophotometric determination of Blue Procion HEGN in effluents of textile industry exploiting the dye aggregation effect and flow injection analysis.

A new spectrophotometric method involving flow injection analysis and textile dye aggregation effect is proposed. The method is based on the aggregation effect of Blue Procion HEGN at pH 3, which relocates its maximum absorption wavelength from 620 to 776 nm, avoiding the interference of other blue textile dyes. For this task, a simple and robust flow injection system was designed, which became a very stable analytical method. When the system was applied to Blue Procion determination in effluent of textile industry, precise results were observed (RSD < 2% within 1.0 and 5.0 mg l(-1) HEGN). The analytical frequency was 80 measurements per hour; the analytical curve was linear from 1.0 to 5.0 mg l(-1) HEGN; the detection limit considering three times the standard deviation of the blank solution (n = 10) was estimated as 0.03 mg l(-1) HEGN; and recoveries between 95% and 105% were found. The system consumes 20 mg of sodium citrate and 125 microl of the sample per determination. No baseline drift was observed during extended (5 h) operation periods.     

The physical and surface chemical characteristics of activated carbons and the adsorption of methylene blue from wastewater

Adsorption of a basic dye, methylene blue, from aqueous solutions onto as-received activated carbons and acid-treated carbons was investigated. The physical and surface chemical properties of the activated carbons were characterized using BET-N(2) adsorption, X-ray photoelectron spectroscopy (XPS), and mass titration. It was found that acid treatment had little effect on carbon textural characteristics but significantly changed the surface chemical properties, resulting in an adverse effect on dye adsorption. The physical properties of activated carbon, such as surface area and pore volume, have little effect on dye adsorption, while the pore size distribution and the surface chemical characteristics play important roles in dye adsorption. The pH value of the solution also influences the adsorption capacity significantly. For methylene blue, a higher pH of solution favors the adsorption capacity. The kinetic adsorption of methylene blue on all carbons follows a pseudo-second-order equation.     

Oxalic acid cross-linked sodium alginate and carboxymethyl chitosan hydrogel membrane for separation of dye/NaCl at high NaCl concentration

Dye desalination is a challenge in the treatment of textile wastewater with high salt concentration. It is imperative to develop salt resistance membrane that is from sustainable materials to effectively treat dye/salt mixtures. And most polymer membrane materials are non-renewable petrochemical resources.In this paper, a green hydrogel membrane(CMCS-OA-Na Alg) was prepared by non-metallic ions of oxalic acid(OA) cross-linking of two natural macromolecules of sodium alginate(Na Alg) and carboxym...     

Roles of the textural and surface chemical properties of activated carbon in the adsorption of acid blue dye

This study has demonstrated the use of empirical modeling in resolving the effects of individual carbon properties on acid blue dye adsorption. Acid blue dye adsorption tests were conducted on activated carbons prepared from bagasse by physical (CO2) and chemical (ZnCl2, MgCl2 and CaCl2) techniques. Empirical models based on the carbon textural (surface area and pore size) properties and the surface chemistry inferred from heteroatom (C,H, N, and S) concentration and carbon surface pH were used to resolve the effects of individual carbon properties on acid blue dye adsorption. This form of analysis was conducted to optimize carbon preparation properties, forming the foundation for tailor-making adsorbents from bagasse suitable for acid dye adsorption. A series of statistical analyses (partial F-tests to establish the parameter significance) measured variants including the mean square error, r2 and adjusted r2, normality, and randomness of residuals, and formed the basis for testing the adequacy of these models. The empirical models suggest that a combination of suitable pore structure and distinct basic surface chemistry generated by sulfur- and nitrogen-based groups, which were also elucidated by Fourier transform infrared spectroscopy, is necessary to promote acid dye adsorption.     

Redox switching of polyoxometalate-methylene blue-based layer-by-layer films

Iron-substituted crown-type polyoxometalate (POM) [P(8)W(48)O(184)Fe(16)(OH)(28)(H(2)O)(4)](20-) has been successfully immobilized onto glassy carbon electrode surfaces by means of the layer-by-layer (LBL) technique employing the cationic redox active dye, methylene blue (MB). The constructed multilayers exhibit pH-dependent redox activity for both the anionic POM and the cationic dye moieties, which is in good agreement with their solution behavior. The films have been characterized by alternating current impedance, atomic force microscopy, and X-ray photoelectron spectroscopy, whereby the nature of the outer layer within the assemblies was found to have an effect upon the film's behavior. Preliminary investigations show that the POM dye-based films show electrocatalytic ability toward the reduction of hydrogen peroxide, however, only when there is an outer anionic POM layer.     

Kinetic and calorimetric study of the adsorption of dyes on mesoporous activated carbon prepared from coconut coir dust

Mesoporous activated carbon has been prepared from coconut coir dust as support for adsorption of some model dye molecules from aqueous solutions. The methylene blue (MB) and remazol yellow (RY) molecules were chosen for study of the adsorption capacity of cationic and anionic dyes onto prepared activated carbon. The adsorption kinetics was studied with the Lagergren first- and pseudo-second-order kinetic models as well as the intraparticle diffusion model. The results for both dyes suggested a multimechanism sorption process. The adsorption mechanisms in the systems dyes/AC follow pseudo-second-order kinetics with a significant contribution of intraparticle diffusion. The samples simultaneously present acidic and basic sites able to act as anchoring sites for basic and acidic dyes, respectively. Calorimetric studies reveal that dyes/AC interaction forces are correlated with the pH of the solution, which can be related to the charge distribution on the AC surface. These AC samples also exhibited very short equilibrium times for the adsorption of both dyes, which is an economically favorable requisite for the activated carbon described in this work, in addition to the local abundance of the raw material.