Evidences for decarbonation and exfoliation of layered double hydroxide in N,N-dimethylformamide-ethanol solvent mixture

The behavior of a Hydrotalcite-like material (carbonate-containing Mg,Al-layered double hydroxide) in N,N-dimethylformamide (DMF)-ethanol mixture, at ambient temperature, has been investigated. The releasing of CO₂ and production of a formate-containing material occurred mainly for 1:1 (v/v) solvent mixture. Decarbonation of Hydrotalcite is promoted by DMF hydrolysis followed by neutralization of brucite-like layers through HCOO⁻ intercalation. Translucent colloidal dispersion of LDH nanoparticles from the formate-containing phase was characterized by transmission electron (TEM) and atomic force (AFM) microscopies. The absence of (00?) reflection at X-ray diffraction (XRD) pattern for dried colloidal dispersion indicated delamination of Hydrotalcite. The restacked sample exhibited broad reflections and typical hydroxide ordered layers non-basal (110) diffraction peaks. A LDH-HCOO⁻ material was also prepared and characterized by FTIR and FT-Raman spectroscopies. Decarbonation and exfoliation of Hydrotalcite in N,N-dimethylformamide-ethanol mixed solvent provide an interesting method for preparation of new intercalated LDH materials.     

Catalytic etherification of N-protected tris(hydroxymethyl)aminomethane for the synthesis of ligands with C3 symmetry

The synthesis of two nonadentate ligands based on a N,N-dibenzylated-tris(hydroxy)methylaminomethane framework is described. The key step consists in tris-etherification of the precursor with elaborated pyridine and bipyridine derivatives and this was greatly improved by the introduction of catalytic amounts of tetrabutylammoniumiodide to the reaction mixture in DMF at room temperature. Analysis of the alkylation rates and an X-ray crystal structure of a bis-alkylated intermediate strongly support the presence of a tight intramolecular hydrogen bond, preventing a fast third alkylation step. The two acidic ligands were successfully prepared by combining a sequence of carboalkoxylation and hydrolysis of the corresponding esters. Both ligands react with europium and terbium chloride salts to generate water luminescent mononuclear complexes.     

Excess Gibbs energies of the ternary system ethanol+N,N-dimethylformamide+cyclohexane at 298.15 K

Vapour–liquid equilibrium (VLE) for the ternary system ethanol (EtOH)+N,N-dimethylformamide (DMF)+cyclohexane (Cy) and for the relevant binary mixtures containing DMF have been determined at 298.15 K by headspace gas chromatographic analysis of the vapour phase directly withdrawn from an equilibrium apparatus. Measurements of liquid–liquid equilibria in both binary DMF+Cy and ternary mixtures have been also carried out. The binary VLE data have been described with different correlation equations. The capabilities of different models of either predicting or reproducing the ternary data have been compared. Excess Gibbs energies G^E as well as activity coefficients γ_i of components have been obtained and briefly discussed. While EtOH+DMF behaves almost ideally with slightly negative G^E-values, both EtOH+Cy and DMF+Cy exhibit large positive deviations. The G^Es of the ternary system are positive with the exception of a narrow region in dilute Cy. The excess entropy and the temperature dependence of G^E and γ_i have been calculated in the whole ternary domain from the known excess enthalpy and heat capacity. The predictions by different equations of the effect of temperature on the mutual solubilities of DMF and Cy as well as on the binodal curve of EtOH+DMF+Cy have been compared with experiment.     

Transformation of aromatic bromides into aromatic nitriles via formations of grignard reagents and their DMF adducts

Various aromatic bromides were efficiently transformed into the corresponding aromatic nitriles in good yields via the formations of Grignard reagents and subsequently N,N-dimethyl formamide (DMF) adducts, followed by treatment with molecular iodine (I₂) in aq NH₃ at room temperature. The present reaction is an easy and practical method for the preparation of aromatic nitriles from aromatic bromides with less toxic reagents, such as Mg, DMF, I₂, and aq NH₃.     

Synthesis and structure of diamine bis(phenolate) complexes containing the Ti(OEt)–O–Ti(OEt) function

Reaction of diamine-bis(phenol) ligands containing a mixture of N-methyl and N,N′-dimethyl-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine, H₂L¹ and H₂L³, with [Ti(OCHMe₂)₄ in absolute ethanol under reflux without exclusion of air and moisture gives [(L¹)Ti (OEt–O–Ti(OEt)(L¹)] (1). [(L³)Ti(OEt)–O–Ti(OEt)(L³)] (2) forms when the remaining solution containing [(L³)Ti(OEt)₂] (3) (characterised by X-ray crystallography) is hydrolysed with H₂O. For the N-methyl and N,N′-dimethyl ligand mixture H₂L² and H₂L⁴, which contain tert-butyl groups on the ortho-positions of the aryl rings, [(L²)Ti(OEt)–O–Ti(OEt)(L²)] (4) forms much more slowly and [(L⁴)Ti(OEt)₂] (5) does not hydrolyse when H₂O is added. When the N-protonated ligand N,N-bis(2-hydroxy-3-methyl-5-tert-butylbenzyl)ethylenediamine, H₂L⁵, is used, rapid hydrolysis to two isomers of [(L⁵)Ti(OEt–O–Ti(OEt)(L⁵)] (6) occurs without addition of water. For N,N-bis(2-hydroxy-3,5-di-tert-butylbenzyl)ethylenediamine, H₂L⁶, hydrolysis to [(L⁶)Ti(OEt)–O–Ti(OEt)(L⁶)] (7) occurs slowly when H₂O is added. For pendant NMe₂ ligand N,N-dimethyl-N′,N′-bis(2-hydroxy-3-methyl-5-tert-butylbenzyl)ethylenediamine, H₂L⁷, the hydrolysis reaction readily gives [(L⁷)Ti(OEt)–O–Ti(OEt)(L⁷)] (8) for which an X-ray crystal structure was obtained. The ortho-tert-butyl ligand derivative H₂L⁸ formed a complex analysing as [(L⁸)Ti(OEt)–O–Ti(OEt)(L⁸)] (9) which could not be studied further due to insolubility. Pendant pyridine ligand N-(2-pyridylmethyl)-N,N-bis(2′-hydroxy-3′-methyl-5′-tert-butylbenzyl)amine, H₂L⁹, apparently forms isomers of [(L⁹)Ti(OEt)–O–Ti(OEt)(L⁹)] and possibly [{(L⁹)Ti(O)}₂] from [(L⁹)Ti(OEt)₂] (10). The ortho-tert-butyl ligand derivative H₂L¹⁰ formed [(L¹⁰)Ti(OEt)–O–Ti(OEt)(L¹⁰)] (11) for which an X-ray crystal structure was obtained.     

Some aspects of nitroxide-mediated living radical polymerization of N-(p-vinylbenzyl)phthalimide

The free radical polymerization of N-(p-vinylbenzyl)phthalimide (VBP) “initiated” with the adduct of 2-benzoyloxy-1-phenylethyl and TEMPO (BS-TEMPO) or TEMPO-terminated polystyrene (PS-TEMPO) in N,N-dimethylformamide (DMF) at 125 °C was found to proceed in a living fashion, providing low-polydispersity PVBP and block copolymers of the type PS-b-PVBA, where TEMPO is 2,2,6,6-tetramethylpiperidinyl-1-oxy. Unlike TEMPO-mediated styrene polymerization, the polymerization rate slightly but distinctly depended on the adduct concentration, which was interpretable as a pre-stationary behavior. The hydrolysis of those polymers gave poly(p-aminomethylstyrene) (PAMS) and PS-b-PAMS, and further treatment of the block copolymer with hydrogen chloride provided an amphiphilic block copolymer. The polymeric amphiphile was used as an emulsifier in emulsion polymerization to produce a positively charged polymeric microsphere.     

Copper-based reverse ATRP process of styrene in mixed solvents

Xylene/N,N-dimethylformamide (DMF) and xylene/ethanol were employed as mixed solvents, respectively, for the reverse atom transfer radical polymerization (R-ATRP) of styrene with the azobisisobutyronitrile (AIBN)/CuBr₂/N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) initiating system. With a limited amount of DMF added in, CuBr₂/PMDETA complex could dissolve well in the reaction system, so the control of polymerization was enhanced compared with the one in which simplex xylene was used as solvent. But the polarity of DMF leaded kinetics to deviation from first order. Ethanol could also improve the solubility of catalyst and be scavenged quickly by argon at 110°, therefore the impact of polarity of solvent on kinetics was negligible. Induction periods were not observed here indicating rapidly establishment of equilibrium between Cu(I) and Cu(II). This method that adding a little amount of polar solvent with low boiling point into non-polar solvent gives a new way to solve the problem of poor solubility of the catalyst in R-ATRP.     

Characterization of CdS nanoparticles in solutions of P(TFE-co-PVDF-co-Prop)/N,N-dimethylformamide

We report in here the preparation of CdS nanoparticles (Q-CdS) in N,N-dimethylformamide (DMF) and poly(tetrafluoroethylene-co-vinylidenefluoride-co-propylene) (PTFE-co-PVDF-co-Prop) by reaction of cadmium acetate and thiourea at room temperature. The formation and size evolution of Q-CdS particles were followed by optical absorption spectroscopy as a function of the aging process of the solutions. The obtained results indicated that not only the Q-CdS particles were more stable in DMF than in aqueous solutions, probably due to the interaction with the CHNO group, but also they were formed in smaller sizes. The particle size obtained in DMF was estimated in 4-6 nm against 10-20 nm in aqueous solution. The results also showed that the velocity of Q-CdS formation is lower when the reaction was carried out in PTFE-co-PVDF-co-Prop dissolved in DMF. The Q-CdS particles formed in this system were also less stable than in pure DMF, probably due to the interaction of the CHNO fragment and CF₂ of polymer chain or phase segregation.     

Practical one-pot conversion of aryl bromides and β-bromostyrenes into aromatic nitriles and cinnamonitriles

Various aryl bromides were efficiently converted into the corresponding aromatic nitriles in good yields by the treatment with Mg turnings and subsequently DMF, followed by treatment with molecular iodine and aq NH₃. The same treatment of aryl bromides, which are weakly reactive to Mg turnings, with ⁱPrMgCl·LiCl and subsequently DMF, followed by the treatment with molecular iodine and aq NH₃ also afforded the corresponding aromatic nitriles in good yields. On the other hand, when N-formylpiperidine was used instead of DMF, p-substituted β-bromostyrenes were converted into the corresponding p-substituted cinnamonitriles, i.e., α,β-unsaturated nitriles, in good to moderate yields by the same procedure. The reactions were carried out by means of a simple experimental procedure and did not require any toxic metal cyanides or expensive rare metals. Therefore, the present reactions are practical and environmentally benign one-pot methods for the preparation of aromatic nitriles, cinnamonitriles, and aliphatic nitriles from aryl bromides, β-bromostyrenes, and alkyl bromides, respectively, through the formation of Grignard reagents and their DMF or N-formylpiperidine adducts.     

TBSOTf-promoted versatile N-formylation using DMF at room temperature

Hydrazides and amines were N-formylated by DMF in the presence of tert-butyldimethylsilyl triflate (TBSOTf) at room temperature, in good to excellent yields.     

Heat capacities and thermodynamic properties of M(HBTC)(4,4′-bipy)·3DMF (M?=?Ni and Co)

Two metal?Corganic frameworks (MOFs) of M(HBTC)(4,4??-bipy)·3DMF [M?=?Ni (for 1) and Co (for 2); H₃BTC?=?1,3,5-benzenetricarboxylic acid (1,3,5-BTC); 4,4??-bipy?=?4,4??-bipyridine; DMF?=?N,N??-dimethylformamide] were synthesized by a one-pot solution reaction and a solvothermal method, respectively, and characterized by powder X-ray diffraction and FT-IR spectra. The low-temperature molar heat capacities of M(HBTC)(4,4??-bipy)·3DMF were measured by temperature-modulated differential scanning calorimetry (TMDSC) for the first time. The thermodynamic parameters such as entropy and enthalpy relative to reference temperature 298.15?K were derived based on the above molar heat capacity data. Moreover, the thermal stability and the decomposition mechanism of M(HBTC)(4,4??-bipy)·3DMF were investigated by thermogravimetry analysis (TGA). The experimental results through TGA measurement demonstrate that both of the two compounds have a three-stage mass loss in air flow.     

Efficient indole N-detosylation using thioglycolate

The dilithium salt of thioglycolic acid in DMF can be used for the very efficient and convenient removal of N-p-toluenesulfonyl (tosyl) groups from a range of indoles at ambient temperature.     

Inclusion and selectivity of amides by p-terphenyl derivative bearing adamantanecarboxylic acid

Hydrogen-bonding compound (1), which is composed of p-terphenyl and adamantanecarboxylic acid, acted as a host molecule for three amides, respectively, forming crystals. Crystals containing the amides (1a and 1b) were produced from N,N-dimethylformamide (DMF) and N,N-diethylformamide (DEF) in 1:2 host:guest complexation stoichiometry, respectively, whereas guest-free crystals (1c) were generated from N-methylformamide (NMF). In the crystal structures of 1a and 1b, carboxylic acids of 1 interact with oxygen atoms of the amide guests through hydrogen bonds to afford network and layer architectures. Crystals 1a and 1b were given from equimolar binary mixtures of DMF or DEF and NMF, respectively. Further, from a mixture of DMF and DEF, guest-inclusion crystals 1d different from 1a and 1b were formed, where DMF was preferentially accommodated. Competition experiments revealed that the selectivity order of 1 for the amide guests was DMF?>?DEF???NMF.     

Facile synthesis of multifunctionalized allenes by magnesium-promoted reductive silylation of aromatic conjugated ynones

Mg-promoted reductive silylation of 4-phenyl-3-butyn-2-one in N,N-dimethylformamide (DMF) in the presence of chlorotrimethylsilane brought about double silylation at the β-carbon and oxygen atoms of the carbonyl group to give a multifunctionalized allene with a vinylsilane moiety and a silyl enol ether moiety. A variety of allenes can be synthesized through this simple methodology. Acid-catalyzed hydrolysis of an allene derived from the trimethylsilylation of 4-phenyl-3-butyn-2-one resulted in the formation of the corresponding benzalacetone with a trimethylsilyl group at the β-position of the carbonyl group in high yield.     

Construction and structural analysis of mono- and heterobimetallic bis(titanate) molecular cages

To explore the utility of bis(dihydroxynaphthalene) ligands for the construction of supramolecular structures, we demonstrated the preparation of cage-shaped complexes by combining these ligands with hexacoordinate titanium(IV). The reaction of biphenylenebis(dihydroxynaphthalene) with TiO(acac)₂ proceeded in the presence of N-methylmorpholine in DMF and an M₂L₃-type cage was obtained by self-organization. As an extension of this work, the preparation of heterobimetallic molecular cages was examined by using combinations of titanium(IV), palladium(II) or platinum(II), and pyridyldihydroxynaphthalenes. Ti(IV)/Pd(II) cages were prepared in one pot by treatment of the pyridyldihydroxynaphthalene ligands with TiO(acac)₂ followed by PdCl₂(MeCN)₂. In the preparation of Ti(IV)/Pt(II) cages, platinum(II)-bridged bis(dihydroxynaphthalene) ligands were isolated in advance from the reaction of pyridyldihydroxynaphthalene ligand precursors with K₂PtCl₄, which were then deprotected and reacted with TiO(acac)₂ in the same conditions as those for biphenylenebis(dihydroxynaphthalene). The precise structures of the Ti(IV)/Pd(II) and Ti(IV)/Pt(II) heterobimetallic cages were fully elucidated by X-ray crystallographic analysis.     

Visible light-induced magnetization change of the cyano-bridged 3d-4f heterobimetallic

A visible light-induced magnetization change of the 3d-4f heterometallic, [Nd(DMF)₄(H₂O)₃(μ-NC)Co(CN)₅]·H₂O (DMF=N,N-dimethylformamide), is observed and described. The plots of χ_MT versus T of the complex showed that the χ_MT values, after visible light illumination, were enhanced by about 25% as compared to before irradiation in the temperature range of 5-40 K.     

Aromatic polyamides with pendent acetoxybenzamide groups and thin films made therefrom

New aromatic polyamides containing 1,3,4-oxadiazole or benzonitrile units in the main chain and 5-(4-acetoxybenzamido) groups in the side chain have been synthesized and their properties have been characterized and compared with those of related polyamides and polyoxadiazole-amides. These polymers show good thermal stability, with initial decomposition temperature being at about 300 °C and glass transition temperature in the range of 260-280 °C. They are easily soluble in certain solvents such as N-methylpyrrolidinone (NMP), N,N^′-dimethylacetamide (DMA) and N,N^′-dimethylformamide (DMF) and can be cast from solutions into thin flexible films. The polymer films had tensile strengths in the range of 77-97 MPa, tensile moduli in the range of 2.3-2.6 GPa and elongation at break values ranging from 6% to 24%. One of the polymers containing the 1,3,4-oxadiazole ring exhibited blue fluorescence.     

Influence of DMF-Induced Oxidative Stress on Membrane and Periplasmic Proteins in Paracoccus sp. SKG

The present study describes the N,N-dimethylformamide (DMF)-induced oxidative stress in Paracoccus sp. SKG. The oxidative stress was evaluated by analysing membrane and periplasmic proteins and K⁺ efflux, as well as by monitoring the activities of antioxidant enzymes like catalase, superoxide dismutase (SOD) and glutathione S-transferase (GST). The exposure of bacterial cells to a higher concentration of DMF resulted in the modification of membrane fatty acid composition which is accompanied by K⁺ efflux. Further, this oxidative stress resulted in increased periplasmic protein which can be attributed to the induction of GST and methionine sulphoxide reductase (Msr) enzymes under solvent stress. Paracoccus sp. SKG is tolerant to high concentrations of DMF up to 6 % (v/v) and its toxic effects. DMF concentration-dependent induction of GST and Msr activities advocates the significant role of these enzymes in the bacterial defence system. The present study provides information which helps us to understand the ROS scavenging machinery in bacteria. The high tolerance of Paracoccus sp. SKG to DMF can be efficiently explored for various bioremediation and biotransformation applications.     

New protic salts of aprotic polar solvents

Aprotic polar solvents such as DMF, acetonitrile or DMSO can be protonated to form stable triflate salts when treated with triflic acid. The reaction of the same solvents with N,N-bis(trifluoromethanesulfonyl)imide led to the isolation of the corresponding N,N-bis(trifluoromethanesulfonyl)imide salts.     

Practical preparation of N-(1-alkynyl)sulfonamides and their synthetic utility in titanium alkoxide-mediated coupling reactions

Aliphatic and aromatic sulfonamides were alkynylated with 1-bromo-1-alkynes in the catalytic presence of CuI to give N-(1-alkynyl)sulfonamides in good to excellent yields. Racemization of optically active sulfonamides was not observed during this alkynylation. The acetylene-titanium complexes generated from the resultant N-(1-alkynyl)sulfonamides and Ti(O-i-Pr)₄/2 i-PrMgCl underwent regio-, olefinic stereo-, and diastereoselective addition to aldehydes to give virtually single allyl alcohols. Alternatively, inter- or intramolecular coupling reaction between N-(1-alkynyl)sulfonamides and another acetylene or olefin with the above titanium alkoxide reagent generated the corresponding titanacycles, hydrolysis of which furnished stereo-defined (sulfonylamino)dienes or cyclic compounds.