Role of kinetic effects on the polarization current around a magnetic island

The polarization current due to a magnetic island rotating in a tokamak plasma is believed to play a central role in the initial evolution of the neoclassical tearing mode. Monte Carlo delta f simulations are performed which also cover a parameter range that is not amenable to analytic treatment but is relevant to experiments. It is shown that the polarization current can change sign when the island rotation frequency is of the order of the ion parallel streaming around the island. Moreover, the current is reduced when the island width is of the order of the ion banana width. Finally, the transition to the enhanced high-collisionality regime is shown to occur for collision frequencies higher than those typical of today's experiments.     

Enhancement of the stabilization efficiency of a neoclassical magnetic island by modulated electron cyclotron current drive in the ASDEX upgrade tokamak

The efficiency of generating a helical current in magnetic islands for the purpose of suppression of neoclassical tearing modes (NTMs) by electron cyclotron current drive (ECCD) is studied experimentally in the ASDEX Upgrade tokamak. It is found that the efficiency of generating helical current by continuous current drive in a rotating island drops drastically as the width 2d of the co-ECCD driven current becomes larger than the island width W. However, by modulating the co-ECCD in phase with the rotating islands O point, the efficiency can be recovered. The results are in good agreement with theoretical calculations taking into account the equilibration of the externally driven current on the island flux surfaces. The result is especially important for large next-step fusion devices, such as ITER, where 2d>W is expected to be unavoidable during NTM suppression, suggesting that modulation capability should be foreseen.     

Direct observation of strain relaxation in iron layers on W(110) by time-resolved STM

Time-resolved,in-situ-applied STM has been used to study the epitaxial growth of iron on W(110) at room temperature. By this way, sequences of STM images show directly the atomistics of the growth process on the surface. The first layer of iron on W(110) grows pseudomorphically without a preferred growth direction. Beginning with the second layer, the islands grow anisotropically with preferred growth in the [001]-direction. The generation of an ordered two-dimensional dislocation network starts at a coverage of 1.4 pseudomorphic monolayers to relax the misfit of 9.4%. A direct correlation of the creation of misfit dislocations in the second layer and the nucleation of the third-layer islands was found. Together with the onset of strain relaxation, the growth mode abruptly changes from layer-by-layer to statistical growth. A quantitative statistical analysis of the data allows to exactly determine the onset of relaxation, the vertical location of the dislocation lines, and the lateral extension of an island that is necessary to induce the formation of dislocations.     

���ŵ���������Ӱ�����ֵ����

通过求解二维热输运方程,数值分析了横越单磁岛的热输运现象。仅有背景加热时,当磁岛宽度小于临界磁岛宽度时,磁岛对能量约束影响不明显;当磁岛宽度大于临界磁岛宽度时,磁岛降低的能量损失随着磁岛宽度呈线性增大,有效径向热导系数在磁岛区域呈高斯分布且最大值在有理面处。当等离子体背景加热与ECRH共同加热时,ECRH对磁岛区域的温度分布及能量约束均有别于背景热源,这为进一步研究ECRH抑制撕裂模的问题提供了基础。     

Polar anchoring strength of a tilted nematic: confirmation of the dual easy axis model

The polar anchoring strength coefficient W and polar pretilt angle theta0 were measured simultaneously for the liquid crystal pentylcyanobiphenyl at a rubbed polyimide alignment layer that is ordinarily used for vertical alignment. It was found that W proportional theta(2)0 over the range 0 degrees < or =theta0 less or similar to 35 degrees . The results provide a confirmation of the dual easy axis model, wherein the liquid crystal director adopts an equilibrium orientation theta0 at the substrate that is determined by competition between a pair of preferred orientation directions.     

Interaction of Ag and O on W(1 1 0) studied by scanning tunneling microscopy

The structural changes of Ag films on W(1 1 0) upon coadsorption of oxygen have been studied by scanning tunneling microscopy. The exposure of one monolayer Ag to oxygen leads to a phase separation into an Ag bilayer and patches of O-covered W(1 1 0). The effective Ag island thickness increases linearly with oxygen exposure. For Ag submonolayer-islands the onset of the bilayer formation is delayed, the induction period increases with the available free W area. We conclude that the steps of the transport process are (1) dissociation of oxygen on W and on the Ag islands, (2) site exchange of atomic oxygen with Ag atoms predominantly at the island edges - while on W(1 1 0) the oxygen is immobile, (3) diffusion of the displaced Ag atoms to the island edges where they are incorporated into the monolayer and (4) initiation of Ag bilayer formation, once the W(1 1 0) is saturated with O. This indicates an unexpected activity of the Ag monolayer on W(1 1 0) towards oxygen dissociation. In case of a reversed deposition sequence, where submonolayer quantities of Ag are adsorbed on an oxygen-precovered W(1 1 0) surface, growth of Ag clusters is observed. The distribution of cluster size and cluster height depends critically on the spatial order within the predeposited oxygen overlayer - it is obvious that the oxygen overlayer on the W surface acts as a structured template for preferential Ag nucleation.     

Model-independent measurement of the W-boson helicity in top-quark decays at D0

We present the first model-independent measurement of the helicity of W bosons produced in top quark decays, based on a 1 fb(-1) sample of candidate tt events in the dilepton and lepton plus jets channels collected by the D0 detector at the Fermilab Tevatron pp Collider. We reconstruct the angle theta(*) between the momenta of the down-type fermion and the top quark in the W boson rest frame for each top quark decay. A fit of the resulting costheta(*) distribution finds that the fraction of longitudinal W bosons f(0)=0.425+/-0.166(stat)+/-0.102(syst) and the fraction of right-handed W bosons f(+)=0.119+/-0.090(stat)+/-0.053(syst), which is consistent at the 30% C.L. with the standard model.     

Effect of weak electric fields on the conduction in thin metal films

The variation of conduction in island metallic Ti, Co, W, and FeNi films in weak electric field is studied. The variation of the differential conductivity of island metallic films with an electric field at temperatures from T = 77 to 300 K is measured, as well as the temperature dependence of the differential conductivity in the same temperature range. It is shown that a thermally activated conduction mode is realized in such structures. The mechanism of variation of conductivity of island metallic films in a weak electric field is discussed.     

On the 2D-3D transition in epitaxial thin film growth

The theory is based on the fact that the equilibrium concentration of single atoms adsorbed on the surface of a monolayer island placed on a foreign substrate such that the substrate-deposit interaction is weaker than the deposit-deposit interaction is higher than the equilibrium concentration of atoms adsorbed on the surface of the same island now placed on a substrate of the same material. This higher adatom concentration leads to 2D nucleation on top of the monolayer island. The difference of the above equilibrium adatom concentrations appears as a driving force for the process of transformation of the initial monolayer island into a 3D island by detachment of atoms from the first monolayer island edges and their subsequent attachment to the edges of the second layer nucleus. The kinetics of this process are studied in detail, the following two cases being considered. The first case consists of breaking up and agglomeration of an initially continuous film into 3D crystals upon heating. The second case consists of change of the growth mode from layer to island mode during the vapour deposition when the substrate temperature increases. Expressions for the critical temperatures for these two phenomena to occur are derived. It is shown that they depend strongly on the substrate orientation, the critical temperature being higher for the 〈111〉 orientation in comparison with the 〈110〉 orientation, if substrate and deposit with a fcc lattice are considered. The theoretical results are compared with experimental data for deposition of Au on Mo{110}, Cu on W{110} and W{100} and Fe on Cu{111}.     

高功率端面抽运Nd:YVO4固体激光器模匹配的研究

研究了端面抽运Ｎｄ：ＹＶＯ４固体激光器激光晶体内基模半径与抽运光斑半径的匹配。晶体的Ｎｄ掺杂原子数分数分别为０．５％和２％,抽运功率分别为１０Ｗ和１４Ｗ。结果表明：ＴＥＭ００模输出功率对ｗ１／ｗｐａ在低于１的很大范围内的变化不敏感,不存在一个确定的最佳ｗ１／ｗｐａ值;在相对很小的ｗ１／ｗｐａ情形,仍可获得高效单一的ＴＥＭ００模输出,在这种情况下热透镜球差具有限模孔径的作用。     

Turbulence investigations during ergodic divertor operation with induced 2/1 tearing mode

Within the last year of TEXTOR operation a major part of the experiments were dedicated to the interaction of the ergodized plasma edge, induced by the dynamic ergodic divertor (DED), with the core plasma. Systematic experiments are performed in the 3/1 configuration of the DED. Depending on , the DED generates a locked 2/1 mode in the plasma at a critical current in the DED coils. Different diagnostics were used to measure the plasma response in the core and edge. The investigations in this paper are focused on the measurement of density fluctuation and the analysis of the coherent-mode structure outside the q = 2 surface using O-mode poloidal correlation reflectometry. A reduction of the quasi-coherent mode amplitude and frequency is observed, caused by the 2/1 mode together with a decrease of the density scale length. Moreover, the deduced poloidal rotation velocity at the q = 3 surface changes from the electron to the ion diamagnetic drift direction with the onset of the 2/1 island. Also a reduction of the density fluctuations is observed as well as a decrease in the poloidal correlation length. From Ar-injection a delayed inward propagation of the emission maximum is observed for different Ar ionization stages when the 2/1 mode is generated.Similar experiments with a slowly rotating DED show that the steepened density gradients are spatially localized and confirm the hypothesis that the 2/1 mode is responsible for the observations.Presented at the Workshop Electric Fields Structures and Relaxation in Edge Plasmas, Nice, France, October 26–27, 2004.     

Experiment and simulation of tearing mode evolution with electron cyclotron current drive in KSTAR

The tearing mode (TM) plasma instability was observed in low confinement (L-mode) plasmas when non-axisymmetric magnetic perturbation (MP) was applied using external coils during 2011 campaign of KSTAR. Based on the collected information of the magnetic island location in a plasma, a discharge was designed for suppression of a (2,1) TM mode by adjusting electron cyclotron (EC) launcher angles to the estimated island position. Here, the (m,n) notation describes the poloidal mode number and the toroidal mode number of the TM, respectively. The discharge is analysed with experimental observations and numerical simulations. Mirnov coil (MC) arrays and electron cyclotron emission (ECE) are used for analysis of the island width and the location as well as the mode number. The EC deposition and its alignment with the island are estimated by X-ray imaging crystal spectroscopy (XICS) and ECE measurements. An integrated numerical system is employed for modelling of this discharge to analyse a temporal evolution of the mode activity by integrating plasma equilibrium, transport, heating and current drive, and the magnetic island evolution, in a self-consistent way. The effect of EC current drive is discussed by comparing with another TM discharge but without ECCD. Some possibilities for classifying this mode to neoclassical tearing mode (NTM) and stabilisation effect of ECCD are suggested based on the experimental observation and the simulation results.     

Three-dimensional vibration analysis of a torus with circular cross section

The free vibration characteristics of a torus with a circular cross section are studied by using the three-dimensional, small-strain, elasticity theory. A set of three-dimensional orthogonal coordinates system, comprising the polar coordinate (r, theta) at each circular cross section and the circumferential coordinate phi around the ring, is developed. Each of the displacement components u(r), v(theta), and w(phi) in the r, theta, and phi directions, respectively, is taken as a product of the Chebyshev polynomials in the r direction and the trigonometric functions in the theta and phi directions. Eigenfrequencies and vibration mode shapes have been obtained via a three-dimensional displacement-based extremum energy principle. Upper bound convergence of the first seven eigenfrequencies accurate to at least six significant figures is obtained by using only a few terms of the admissible functions. The eigenfrequency responses due to variation of the ratio of the radius of the ring centroidal axis to the cross-sectional radius are investigated in detail. Very accurate eigenfrequencies and deformed mode shapes of the three-dimensional vibration are presented. All major modes such as flexural thickness-shear modes, in-plane stretching modes, and torsional modes are included in the analysis. The results may serve as a benchmark reference for validating other computational techniques for the problem.     

Covariant differential calculus on the quantum exterior vector space

We formulate a differential calculus on the quantum exterior vector space spanned by the generators of a non-anticommutative algebra satisfying

Application of the Gyrotron FU II Submillimeter Wave Radiation Source to Plasma Scattering Measurements

Gyrotron FU II has been successfully applied as a submillimeter wave radiation source to plasma scattering measurements on the Compact Helical System (CHS) in National Institute for Fusion Science (NIFS) in Japan. The gyrotron operates in a long pulse mode (the pulse width is about 600 ms) at a frequency of about 350 GHz (the corresponding wavelength is 0.85 mm). The output power is about 110 W. The output power is transmitted along a circular waveguide system and converted to a Gaussian-like beam by a quasi-optical antenna. After that, the beam is directed onto the CHS plasma and the scattered signal is detected by a homodyne detection system. The frequency and the wave number of the scattered signal are analyzed. The results suggest that a broad band low frequency (several tens to several hundreds kHz) density fluctuation is excited in the CHS plasma only during neutral beam injection (NBI) or ion cyclotron resonance (ICR) heating.     

Optimal conditions for submonolayer nanoisland growth in ion beam assisted deposition

We study the optimal conditions for nanoisland growth in ion beam assisted deposition (IBAD). This situation occurs when adatom islands remain small enough to prevent the onset of three-dimensional growth, while at the same time preventing ion-induced surface erosion. To this end, we develop a rate equation model of IBAD, which embodies continuous deposition of adatoms and creation of vacancies, recombination of vacancies at adatom island edges, as well as recombination of adatoms at vacancy island edges. These rate equations are solved by numerical simulations based on the particle coalescence method. To determine the optimal growth condition, we find the largest mean size of the vacancy islands leading to their survival. We show that at this onset between the rough and smooth layer-by-layer growth regimes there is a simple exponential relation between the largest size of the vacancy islands and the external control parameters of the growth.     

A study of local density of states of atom clusters on the W(110) surface

The kinetic energy distributions of field desorbed He ions from tungsten clusters of one to five atoms on a W(110) surface are measured using a high resolution pulsed-laser time-of-flight atom probe. The He field ion energy distribution from the single W adatom shows an extra peak-like feature centered at 2.7 eV above the Fermi level. It has a full width at half maximum (fwhm) of 2.3 eV. The data from two tungsten adatoms separated by two lattice constants have nearly the same feature with the extra peak located at 2.5 eV above the Fermi level. These peaks arise from resonance tunneling with the adatom local density of states (LDOS). The He ion energy distribution of a tungsten dimer has an extra peak centered at 1.5 eV above the Fermi level. The fwhm is about 4 eV. The spectra from four and five tungsten adatom clusters show only one peak each, similar to that from a flat plane.     

Diode-pumped passively mode-locked Nd:YVO4 laser at 1342 nm with periodically poled LiNbO3

In this Letter, we demonstrate a nonlinear-mirror (NLM) mode-locked diode-pumped solid-state Nd:YVO4 laser operating at 1342?nm, in which the NLM comprises a periodically poled LiNbO3 crystal and a dichroic mirror. The self-starting threshold for cw mode locking is 1.5?W, which is significantly lower than that of saturable absorber mode locking. An average power of 1.52?W at 1342?nm is obtained under diode pump power of 10?W at 808?nm, with the slope efficiency being up to 16.8%. The pulse width and the repetition rate of the mode-locked laser output are about 9.5?ps and 101?MHz, respectively.     

外部驱动电流抑制双撕裂模的发展

在Hall MHD方程组中引入外部驱动电流项,数值模拟外部驱动电流对双撕裂模不稳定性的影响.结果表明,在x点加入反向外部驱动电流对撕裂模的发展有抑制作用,周期性的外部驱动电流对双撕裂模不稳定性的抑制效果较好,能控制磁岛的尺度在相互驱动的临界尺度以下,避免发生双撕裂模非线性磁场重联的爆发,随着驱动电流周期变大抑制效果变坏,在一定限度内随着驱动电流强度增大抑制效果变好,在一定范围内随着驱动电流宽度变小抑制效果变好.     

The mechanism research of the Cr^4＋Nd^3＋：YAG laser

The 946nm diode-pump microchip self-Q-switched laser of a chromium and neodymium codoped yttrium aluminum garnet crystal material (Cr^{4+}Nd^{3+}:YAG) is studied, especially about its physical mechanism of operation. The {}^4F_{3/2}→{}^4I_{9/2} transition of Nd^{3+} ion is beneficial to achieving laser oscillation in a quasi-three-level system based on coating the cavity mirrors of the microchip with films that suppress the 1064nm operation and enhance the 946nm laser. The Cr^{4+} ion is a saturable absorber. The initial loss N_{t1} is high, which acts as the threshold for laser oscillation. The stable loss N_{t2} is low because the Cr^{4+} ion is acceleratively bleached by the fast enhancement of the oscillating laser. The high N_{t1}, small N_{t2} and fast progresses permit the oscillating laser of the Cr^{4+}Nd^{3+}:YAG to have a good self-Q-switched property whose full width at half maximum is about 4.2ns. Its highest laser power is about 5.7mW. Its peak power is about 150W. Its good fundamental transverse TEM_{00} mode results from the absorption bleaching established by both the pump and oscillating lasers, which suppress other transverse mode and allow the oscillation only in the fundamental transverse TEM_{00} mode.